Search

Objective To explore the status and factors influencing the intrinsic capacity of hospitalized elderly patients, in order to provide a reference for further activity to maintain the function of the elderly and improve the outcome. Methods Using a convenience sampling method, 264 elderly patients admitted to the geriatric ward from March 2020 to April 2022 were selected as the study population, and the WHO-recommended intrinsic capacity assessment tool, the Geriatric Index of Comorbidity (GIC) and the General Information Questionnaire were applied to analyze the status and factors influencing the intrinsic capacity of hospitalized elderly patients. Results The intrinsic capacity score of 264 elderly patients was 2. 0 (2. 0, 3. 0), and 94. 32%(249/263) of elderly inpatients had a decrease in at least one dimension of intrinsic capacity. There were differences in age, marital status, residence status, and number of GIC diseases and GIC-disease burden among elderly inpatients with different status of intrinsic capacity in univariate analysis (P < 0. 05). Logistic regression analysis suggested that age (OR=0. 904, 95% CI: 0. 869 to 0. 941) and residence status (OR=0. 254, 95% CI: 0. 092 to 0. 700) were independent influences on the intrinsic capacity of hospitalized elderly patients. Conclusion Intrinsic capacity impairment in hospitalized elderly patients is common. Age and residential status are influential factors in the intrinsic capacity of hospitalized elderly patients. Although multi-morbidity in older adults is correlated to intrinsic capacity to some extent, but it is not an independent influence of intrinsic capacity. (目的 探讨住院老年患者内在能力现状及影响因素, 为进一步采取积极措施维持老年人功能和改善预后提供参考依据。方法 采用便利抽样的方法, 选取2020年3月—2022年4月入住医院老年医学病房的264例老年患者作为研究对象, 应用WHO推荐的内在能力评估工具、老年人共病指数(GIC)及一般资料问卷进行调查, 分析住院老年患者的内在能力现状及影响因素。结果 264例老年患者的内在能力得分为2. 0(2. 0, 3. 0), 有94. 32%(249/263)的老年住院患者存在至少1个维度的内在能力下降。单因素分析中内在能力不同状态的老年住院患者之间年龄、婚姻状况、居住情况及GIC疾病数目与GIC疾病负担存在差异(P＜0. 05)。Logistics回归分析提示年龄(OR=0. 904, 95%CI: 0. 869～0. 941)及居住情况(OR=0. 254, 95%CI: 0. 092～0. 700)是住院老年患者内在能力的独立影响因素。结论 住院老年患者内在能力下降的情况普遍存在。年龄和居住情况是住院老年患者内在能力的影响因素。虽然老年人多病共存在一定程度上与内在能力具有相关性, 但并非内在能力的独立影响因素。)

All‐polymer solar cells have experienced rapid development in recent years by the emergence of polymerized small molecular acceptors (PSMAs). However, the strong chain entanglements of polymer donors (PDs) and polymer acceptors (PAs) decrease the miscibility of the resulting polymer mixtures, making it challenging to optimize the blend morphology. Herein, we designed three PAs, namely PBTPICm‐BDD, PBTPICγ‐BDD and PBTPICF‐BDD, by smartly using a BDD unit as the polymerized unit to copolymerize with different Y‐typed non‐fullerene small molecular acceptors (NF‐SMAs), thus achieving a certain degree of distortion and giving the polymer system enough internal space to reduce the entanglements of the polymer chains. Such effects increase the chances of the PD being interspersed into the acceptor material, which improve the solubility between the PD and PA. The PBTPICγ‐BDD and PBTPICF‐BDD displayed better miscibility with PBQx‐TCl, leading to a well optimized morphology. As a result, high power conversion efficiencies (PCEs) of 17.50 % and 17.17 % were achieved for PBQx‐TCl : PBTPICγ‐BDD and PBQx‐TCl : PBTPICF‐BDD devices, respectively. With the addition of PYFT‐o as the third component into PBQx‐TCl : PBTPICγ‐BDD blend to further extend the absorption spectral coverage and finely tune microstructures of the blend morphology, a remarkable PCE of 18.64 % was realized finally. [ABSTRACT FROM AUTHOR]

Organic self‐assembled molecules (OSAMs) based hole‐transporting materials play a pivotal role in achieving highly efficient and stable inverted perovskite solar cells (IPSCs). However, the reported carbazol‐based OSAMs have serious drawbacks, such as poor wettability for perovskite solution spreading due to the nonpolar surface, worse matched energy arrangement with perovskite, and limited molecular species, which greatly limit the device performance. To address above problems, a novel OSAM [4‐(3,6‐glycol monomethyl ether‐9H‐carbazol‐9‐yl) butyl]phosphonic acid (GM‐4PACz) was synthesized as hole‐transporting material by introducing glycol monomethyl ether (GM) side chains at carbazolyl unit. GM groups enhance the surface energy of Indium Tin Oxide (ITO)/SAM substrate to facilitate the nucleation and growth of up perovskite film, suppress cation defects, release the residual stress at SAM/perovskite interface, and evaluate energy level for matching with perovskite. Consequently, the GM‐4PACz based IPSC achieves a champion PCE of 25.52 %, a respectable open‐circuit voltage (VOC) of 1.21 V, a high stability, possessing 93.29 % and 91.75 % of their initial efficiency after aging in air for 2000 h or tracking at maximum power point for 1000 h, respectively. [ABSTRACT FROM AUTHOR]

Inverted perovskite solar cells (IPSCs) have attracted unprecedented attention due to their negligible hysteresis, long‐term operational stability, low temperature, and cost‐effective fabrication process, as well as wide applications. The power conversion efficiency (PCE) of IPSCs has skyrocketed from 3.9% in 2013 to certified 26.1% in 2023, which is over the certified 25.8% of regular counterpart, benefiting from the emergence of a great number of organic hole‐transporting materials (HTM). This review provides an overview of the recent development of organic hole‐transporting materials in the efficiency and stability of IPSCs, including organic small molecules and conjugated conductive polymers. The effective strategies for the charge‐transport layer and perovskite films of IPSCs are also discussed. Finally, the prospective for further development of IPSCs is outlined, including developing novel hole‐transporting materials and fabricating techniques to meet the requirements of commercial application. [ABSTRACT FROM AUTHOR]

Volatile solid additives have attracted increasing attention in optimizing the morphology and improving the performance of currently dominated non‐fullerene acceptor‐based organic solar cells (OSCs). However, the underlying principles governing the rational design of volatile solid additives remain elusive. Herein, a series of efficient volatile solid additives are successfully developed by the crossbreeding effect of chalcogenation and iodination for optimizing the morphology and improving the photovoltaic performances of OSCs. Five benzene derivatives of 1,4‐dimethoxybenzene (DOB), 1‐iodo‐4‐methoxybenzene (OIB), 1‐iodo‐4‐methylthiobenzene (SIB), 1,4‐dimethylthiobenzene (DSB) and 1,4‐diiodobenzene (DIB) are systematically studied, where the widely used DIB is used as the reference. The effect of chalcogenation and iodination on the overall property is comprehensively investigated, which indicates that the versatile functional groups provided various types of noncovalent interactions with the host materials for modulating the morphology. Among them, SIB with the combination of sulphuration and iodination enabled more appropriate interactions with the host blend, giving rise to a highly ordered molecular packing and more favorable morphology. As a result, the binary OSCs based on PM6:L8‐BO and PBTz‐F:L8‐BO as well as the ternary OSCs based on PBTz‐F:PM6:L8‐BO achieved impressive high PCEs of 18.87%, 18.81% and 19.68%, respectively, which are among the highest values for OSCs. [ABSTRACT FROM AUTHOR]

A double‐fibril network of the photoactive layer morphology is recognized as an ideal structure facilitating exciton diffusion and charge carrier transport for high‐performance organic solar cells (OSCs). However, in the layer‐by‐layer processed OSCs (LbL‐OSCs), polymer donors and small molecule acceptors (SMAs) are separately deposited, and it is challenging to realize a fibril network of pure SMAs with the absence of tight interchain entanglement as polymers. In this work, crystalline small molecule donors (SMDs), named TDZ‐3TR and SeDZ‐3TR, were designed and introduced into the L8‐BO acceptor solution, forcing the phase separation and molecular fibrilization. SeDZ‐3TR showed higher crystallinity and lower miscibility with L8‐BO acceptor than TDZ‐3TR, enabling more driving force to favor the phase separation and better molecular fibrilization of L8‐BO. On the other hand, two donor polymers of PM6 and D18 with different fibril widths and lengths were put together to optimize the fibril network of the donor layer. The simultaneously optimization of the acceptor and donor layers resulted in a more ideal double‐fibril network of the photoactive layer and an impressive power conversion efficiency (PCE) of 19.38 % in LbL‐OSCs. [ABSTRACT FROM AUTHOR]

As simple and versatile tools, additives have been widely used to refine active layer morphology and have played a crucial role in boosting the power conversion efficiency (PCE) of organic solar cells (OSCs). Herein, three novel solvent additives named Th‐FSi, Th‐ClSi, and Th‐BrSi with the same backbone of 2,5‐bis(trimethylsilyl)thiophene are designed and synthesized by substituting different halogens of fluorine, chlorine, and bromine, respectively. Notably, Th‐ClSi exhibits the more significant dipole moment and engages in non‐covalent interactions with a small‐molecule acceptor (SMA) L8‐BO, which slight adjustments in intermolecular interaction, crystallinity, and molecular packing in the PM6:L8‐BO active layer. Consequently, the OSCs incorporating Th‐ClSi outperform their Th‐FSi and Th‐BrSi counterparts in photo‐capturing, reduced energy loss, superior exciton dissociation, and charge transfer properties, out‐coming yields in an enhanced PCE of 18.29%. Moreover, by integrating a near‐infrared absorbing SMA (BTP‐eC9) guest into the PM6:L8‐BO matrix, the absorption spectrum to span 880–930 nm, and the resultant ternary OSCs achieve a commendable PCE of 19.17%, ranking among the highest efficiencies reported to date is expanded. These findings underscore the promise of halogenated thiophene‐based solvent additives as a potent avenue for morphological fine‐tuning and consequent PCE enhancement in OSCs. [ABSTRACT FROM AUTHOR]

Background: Antral follicles consist of an oocyte cumulus complex surrounding by somatic cells, including mural granulosa cells as the inner layer and theca cells as the outsider layer. The communications between oocytes and granulosa cells have been extensively explored in in vitro studies, however, the role of oocyte-derived factor GDF9 on in vivo antral follicle development remains elusive due to lack of an appropriate animal model. Clinically, the phenotype of GDF9 variants needs to be determined. Methods: Whole-exome sequencing (WES) was performed on two unrelated infertile women characterized by an early rise of estradiol level and defect in follicle enlargement. Besides, WES data on 1,039 women undergoing ART treatment were collected. A Gdf9Q308X/S415T mouse model was generated based on the variant found in one of the patients. Results: Two probands with bi-allelic GDF9 variants (GDF9His209GlnfsTer6/S428T, GDF9Q321X/S428T) and eight GDF9S428T heterozygotes with normal ovarian response were identified. In vitro experiments confirmed that these variants caused reduction of GDF9 secretion, and/or alleviation in BMP15 binding. Gdf9Q308X/S415T mouse model was constructed, which recapitulated the phenotypes in probands with abnormal estrogen secretion and defected follicle enlargement. Further experiments in mouse model showed an earlier expression of STAR in small antral follicles and decreased proliferative capacity in large antral follicles. In addition, RNA sequencing of granulosa cells revealed the transcriptomic profiles related to defective follicle enlargement in the Gdf9Q308X/S415T group. One of the downregulated genes, P4HA2 (a collagen related gene), was found to be stimulated by GDF9 protein, which partly explained the phenotype of defective follicle enlargement. Conclusions: GDF9 bi-allelic variants contributed to the defect in antral follicle development. Oocyte itself participated in the regulation of follicle development through GDF9 paracrine effect, highlighting the essential role of oocyte-derived factors on ovarian response. [ABSTRACT FROM AUTHOR]

To simultaneously stabilize cesium lead triiodide (CsPbI3) precursor solution and passivate the defects in CsPbI3 film is greatly significant for achieving highly stable and efficient CsPbI3 perovskite solar cells (PSCs). Herein, an effective redox 4‐fluorobenzothiohydrazide (FBTH) is developed to stabilize the precursor solution and passivate iodine/lead‐related defects for high‐quality CsPbI3 film. The comprehensive research confirms that 1) a new compound FBTH‐I is obtained from an effective redox interaction between FBTH and molecular iodine (I2) in perovskite precursor solution, which can effectively impede the formation of I2 molecule and restrain I− migration in perovskite film by forming N–H···I bond; 2) FBTH‐I can also passivate Pb‐related defects via forming S···Pb interaction. Consequently, the CsPbI3 PSC based on FBTH‐treated precursor solution exhibits a fascinating power conversion efficiency (PCE) of 21.41%, which is one of the highest PCE values among the reported pure CsPbI3 PSCs so far, and an outstanding stability against the harsh conditions, such as thermal annealing and continuous light‐illumination. [ABSTRACT FROM AUTHOR]

Employing volatile solid additives have emerged as a promising method to optimize the morphology and improve the performance of organic solar cells (OSCs). However, principles governing the efficient design of solid additives remain elusive. Herein, the programmed fluorination and/or bromination on benzene core to develop efficient additives for OSCs is reported. The programmed fluorination and/or bromination endow the five halogen benzene derivatives, 1,3,5‐trifluorobenzene, hexafluorobenzene, 1,3,5‐tribromo‐2,4,6‐trifluorobenzene (TFTB), 1,3,5‐tribromobenzene, and hexabromobenzene, with different melting and boiling points, volatility, as well as interactions with the host blend. Studies indicate that the additives with extremely high and low volatility are almost powerless and even detrimental to the morphology evolution. Among them, the combination of fluorine and bromine atoms on TFTB not only enables the more appropriate m.p./b.p. and volatility, but also exerts stronger molecular interactions with the host blend, giving rise to higher ordered molecular packing and more favorable morphology. Importantly, TFTB exhibits good universality to optimize the performances of OSCs with high power conversion efficiencies (PCEs; over 18%) in a group of binary blend systems, and an impressive PCE of 19.43% in the ternary PBTz‐F:PM6:L8‐BO system. [ABSTRACT FROM AUTHOR]

Although the power conversion efficiency (PCE) of perovskite solar cells (PSCs) is 26.1%, their stability is still a roadblock for large‐scale commercialization. In the initial density‐functional theory research, it is shown that the most damaging type of defect that destroys device performance is undercoordinated Pb2+ on the surface of the perovskite thin film. An ultraviolet‐absorbent material, 2‐hydroxybenzophenone (HBP), is utilized to specifically passivate this type of defect. In theoretical studies, it is shown that it effectively binds to the undercoordinated Pb2+ via its –C═O group. It also passivates I−‐related defects by forming a hydrogen bond using its –OH group, resulting in decreased trap density and hence prolonged carrier lifetime. The HBP can absorb ultraviolet irradiation, leading to much‐reduced UV degradation; its hydrophobic benzene rings protect the perovskite from moisture permeation. As a result, the constructed device reaches a high PCE of 16.39% with superior stability. The bare device maintains 80.4% of its initial PCE after exposure to ambient air for 792 h. In comparison, the control device without HBP retains only 63.2% of its initial efficiency. Under UV irradiation (80 mW cm−2, 365 nm) for 13 h, the former retains 77.9% of its initial PCE while the control device lost 52% of its initial value. [ABSTRACT FROM AUTHOR]

All‐inorganic perovskite solar cells (PSCs) have been the research focus due to their high thermal stability and proper band gap for tandem solar cells. However, their power conversion efficiency (PCE) is still lower than that of organic‐inorganic hybrid PSCs. Herein, a sacrificing dye (Rhodamine B isothiocyanate, RBITC) is developed to regulate the growth of perovskite film by in situ release of ethylammonium cations, isothiocyanate anions and benzoic acid molecules upon annealing and illumination. The ethylammonium cations can efficiently passivate surface defects. The isothiocyanate anions incorporate with uncoordinated Pb to regulate the crystallization process. The benzoic acid molecules facilitate the nucleation of the perovskite crystals. Especially, the illumination can accelerate the release of these beneficial ions/molecules to improve the quality of perovskite films further. After optimization with RBITC, a high open circuit voltage (VOC) of 1.24 V and a champion PCE of 20.95% are obtained, which are among the highest Voc and PCE values of CsPbI3 PSCs. Accordingly, the operational stability of the PSC devices is significantly improved. The results provide an efficient chemical strategy to regulate the formation of perovskite films in whole crystallization process for high performance all‐inorganic PSCs. [ABSTRACT FROM AUTHOR]

The poor interface quality between cesium lead triiodide (CsPbI3) perovskite and the electron transport layer limits the stability and efficiency of CsPbI3 perovskite solar cells (PSCs). Herein, a 4‐amino‐2,3,5,6‐tetrafluorobenzoate cesium (ATFC) is designed as a bifacial defect passivator to tailor the perovskite/TiO2 interface. The comprehensive experiments demonstrate that ATFC can not only optimize the conductivity, electron mobility, and energy band structure of the TiO2 layer by passivation of the undercoordinated Ti4+, oxygen vacancy (VO), and free OH defects but also promote the yield of high‐quality CsPbI3 film by synergistic passivation of undercoordinated Pb2+ defects with the CO group and F atom, and limiting I− migration via F···I interaction. Benefiting from the above interactions, the ATFC‐modified CsPbI3 device yields a champion power conversion efficiency (PCE) of 21.11% and an excellent open‐circuit voltage (VOC) of 1.24 V. Meanwhile, the optimized CsPbI3 PSC maintains 92.74% of its initial efficiency after aging 800 h in air atmosphere, and has almost no efficiency attenuation after tracking at maximum power point for 350 h. [ABSTRACT FROM AUTHOR]

All‐inorganic CsPbX3 (X = I, Br, Cl or their mixtures) perovskites attract enormous attention in recent years due to their excellent optoelectronic properties, outstanding thermal/light stability, and wide range of applications in electronic devices. Encouragingly, the reported power conversion efficiency of CsPbX3 perovskite solar cells (PSCs) rockets up from 2.9% in 2015 to the present 21.0%. In order to further promote the performance of CsPbX3 PSCs toward the Shockley–Queisser efficiency limit, it is important to optimize the quality of perovskite films by crystallization kinetics modulation and defect suppression. In this review, first, some fundamental information about all‐inorganic CsPbX3 perovskites is briefly introduced, including the crystallization mechanism, growth mode, crystal structure, and phase stability as well as possible defects and their effects on device performance. Second, the recent exciting progress of the crystallization modulation strategies for high‐quality CsPbX3 films is summarized and discussed in detail. The advantages of different strategies, including annealing engineering, solvent engineering, precursor engineering, composition engineering, and interface engineering, are highlighted. Finally, methods for improving the efficiency of inorganic PSCs are discussed, and the future development prospects of inorganic PSCs are also outlined. [ABSTRACT FROM AUTHOR]

The improvement of power conversion efficiency (PCE) and stability of the perovskite solar cell (PSC) is hindered by carrier recombination originating from the defects at the buried interface of the PSC. It is crucial to suppress the nonradiative recombination and facilitate carrier transfer in PSC via interface engineering. Herein, P‐biguanylbenzoic acid hydrochloride (PBGH) is developed to modify the tin oxide (SnO2)/perovskite interface. The effects of PBGH on carrier transportation, perovskite growth, defect passivation, and PSC performance are systematically investigated. On the one hand, the PBGH can effectively passivate the trap states of Sn dangling bonds and O vacancies on the SnO2 surface via Lewis acid/base coordination, which is conducive to improving the conductivity of SnO2 film and accelerating the electron extraction. On the other hand, PBGH modification assists the formation of high‐quality perovskite film with low defect density due to its strong interaction with PbI2. Consequently, the PBGH‐modified PSC exhibits a champion power conversion efficiency (PCE) of 24.79%, which is one of the highest PCEs among all the FACsPbI3‐based PSCs reported to date. In addition, the stabilities of perovskite films and devices under high temperature/humidity and light illumination conditions are also systematically studied. [ABSTRACT FROM AUTHOR]

Surmounting complicated defects at the electron transport layer (ETL) and perovskite interface plays a non‐trivial role in improving efficiency and stability of perovskite solar cells (PSCs). Herein, an asymmetric interface modification strategy (AIMS) is developed to passivate the defects from both a SnO2 ETL and the perovskite buried surface via incorporating 1,3‐thiazole‐2,4‐diammonium (TDA) into the SnO2/perovskite interface. Detailed experimental and calculated results demonstrate that N3 (the nitrogen atom bonding to the imine) in the TDA preferentially cures the free hydroxyl (OH), oxygen vacancy (VO), and the Sn‐related defects on the SnO2 surface, while N1 (the nitrogen atom bonding to the vinyl) is more inclined to passivate the Pb2+ and I− related defects at the perovskite buried surface. As a result, the TDA‐modified FACsPbI3 PSC yields a champion power conversion efficiency (PCE) of 24.96% with a gratifying open‐circuit voltage (Voc) of 1.20 V. In addition, the optimized PSCs exhibit charming air‐operational stability with the unencapsulated device sustaining 97.04% of its initial PCE after storage in air conditions for 1400 h. The encapsulated device maintains 90.21% of its initial PCE after maximum power point tracking for 500 h. [ABSTRACT FROM AUTHOR]

Highlights: Wide-bandgap perovskite solar cells are reviewed in detail from the views of compositions, additives, charge transport layers, interfaces and preparation methods. The key factors affecting open-circuit voltage and photostability are carefully discussed. The future directions and challenges in developing wide-bandgap perovskite solar cells are highlighted. Perovskite-based tandem solar cells have attracted increasing interest because of its great potential to surpass the Shockley–Queisser limit set for single-junction solar cells. In the tandem architectures, the wide-bandgap (WBG) perovskites act as the front absorber to offer higher open-circuit voltage (VOC) for reduced thermalization losses. Taking advantage of tunable bandgap of the perovskite materials, the WBG perovskites can be easily obtained by substituting halide iodine with bromine, and substituting organic ions FA and MA with Cs. To date, the most concerned issues for the WBG perovskite solar cells (PSCs) are huge VOC deficit and severe photo-induced phase separation. Reducing VOC loss and improving photostability of the WBG PSCs are crucial for further efficiency breakthrough. Recently, scientists have made great efforts to overcome these key issues with tremendous progresses. In this review, we first summarize the recent progress of WBG perovskites from the aspects of compositions, additives, charge transport layers, interfaces and preparation methods. The key factors affecting efficiency and stability are then carefully discussed, which would provide decent guidance to develop highly efficient and stable WBG PSCs for tandem application. [ABSTRACT FROM AUTHOR]

A desired morphology is essential for achieving efficient polymer solar cells. Donors and acceptors with appropriate crystallization can lead to a suitable phase-separated morphology for effective photocurrent generation process. Inspired by the success of Y6 acceptors and the 2D side chain engineering on popular polymer donors and small molecule acceptors, the usage of unique 2D 3,4-ethylene dioxythiophene (EDOT) side chains on Y6 to regulate its crystallinity, compatibility, and thus the related blend morphology is explored. In this study, two molecules of BTP-EDOT-4F and BTP-EDOT-4Cl with such unique 2D EDOT side chains are designed and synthesized. Due to the advantage of EDOT side chain, when these molecules are blended with PM6, the decent power conversion efficiencies (PCEs) of 16.78% and 15.87% are obtained. Furthermore, BTP-EDOT-4F is selected as the third component and added into PM6:L8-BO binary system to form ternary blends. The optimized crystallinity, compatibility, and morphology of such ternary blend are discovered in the presence of BTP-EDOT-4F, which enables efficient exciton dissociation and charge transport as well as decreased recombination, resulting in higher short circuit current density Jsc) and fill factor. Finally, the outstanding PCE of 18.56% is achieved in ternary blends containing PM6, L8-BO, and BTP-EDOT-4F. [ABSTRACT FROM AUTHOR]

High density of defects at interface severely affects the performance of perovskite solar cells (PSCs). Herein, cobalt (II) hexafluoro‐2,4‐pentanedionat (CoFAc), a hinge‐type fluorine‐rich complex, is introduced onto the surface of formamidinium cesium lead iodide (FACsPbI3) film to address the issues of perovskite/Spiro‐OMeTAD interface. The existence of CoFAc passivates both organic cation and halide anion vacancies by establishing powerful hydrogen bonds with HC(NH2)2+ (FA+) and strong ionic bonds with Pb2+ in perovskite films. In addition, CoFAc serves as a connecting link to enhance interfacial hole‐transport kinetics via interacting with Spiro‐OMeTAD. Consequently, FACsPbI3 PSCs with CoFAc modification display a champion power conversion efficiency (PCE) of 24.64% with a charming open‐circuit voltage (VOC) of 1.191 V, which is the record VOC among all the reported organic‐inorganic hybrid PSCs with TiO2 as electron transport layer. Furthermore, CoFAc‐modified devices exhibit an outstanding long‐term stability, which can maintain 95% of their initial PCEs after exposure to ambient atmosphere for 1500 h without any encapsulation. [ABSTRACT FROM AUTHOR]

Constructing terpolymer has attracted increasing attention as a strategy to improve the performance of polymer solar cell. Terpolymer usually offers an opportunity to lower the frontier molecular orbital energy level, introduces additional absorption band and sometimes optimizes the morphology of the active blend. Generally, the additional segment in terpolymer backbone inevitably introduces backbone disorder, which causes entropy rises. However, selecting a suitable dipole unit introduces extra driving forces for crystallization by enhancing intermolecular interactions. This provides a handy knob for tradeoff between intermolecular interaction and backbone disorder, thus regulating the blend morphology. Herein, a high dipole and electron‐deficient group of pyrrolo[3,4‐f]benzotriazole‐5,7(6H)‐dione (TzBI) is incorporated into the high‐performance donor polymer and a series of terpolymers with different content of TzBI are designed. As expected, the morphology is optimized gradually for improving charge generation and charge transport, also suppressing charge recombination. The champion device with 10% TzBI exhibited a power conversion efficiency (PCE) of 18.36%, which is 5% increase compared to the controlled device. This study presents a charming terpolymer strategy by highly electron‐deficient and high dipole segment to realize a tradeoff between intermolecular interaction and backbone disorder, facilitating the optimization of morphology and elevation of fill factor and device efficiency. [ABSTRACT FROM AUTHOR]

Side‐chain engineering with heteroatoms is not only effective in tuning frontier molecular orbitals, but also possible for forming secondary bonds which can be utilized to planarize the molecular backbone, hence, improving the photon absorption as well as charge‐transport abilities of polymer solar‐cell (PSC) materials. Herein, two types of unconventional side chains, namely carboxylate and carbamate, containing various heteroatoms are introduced to the thiophene bridges in high performance benzodithiophene (BDT) based donor polymers to from the novel polymers PTzTz‐C and PTzTz‐N, respectively. In these polymers, non‐covalent O⋅⋅⋅S and N⋅⋅⋅H interactions induce a high tendency to aggregation. In a ternary‐blend PSC with PTzTz‐N added to the high‐performance D18 : BTP‐eC9 blend, complimentary absorption and improved thin‐film morphology were observed with a top power conversion efficiency of 18.76 %, which is an improvement of almost 5 % over the D18 : BTP‐eC9 binary blends. [ABSTRACT FROM AUTHOR]

All‐inorganic CsPbI3 perovskite presents preeminent chemical stability and a desirable band gap as the front absorber for perovskite/silicon tandem solar cells. Unfortunately, CsPbI3 perovskite solar cells (PSCs) still show low efficiency due to high density of defects in solution‐prepared CsPbI3 films. Herein, three kinds of hydrazide derivatives (benzoyl hydrazine (BH), formohydrazide (FH) and benzamide (BA)) are designed to reduce the defect density and stabilize the phase of CsPbI3. Calculation and characterization results corroborate that the carboxyl and hydrazine groups in BH form strong chemical bonds with Pb2+ ions, resulting in synergetic double coordination. In addition, the hydrazine group in the BH also forms a hydrogen bond with iodine to assist the coordination. Consequently, a high efficiency of 20.47 % is achieved, which is the highest PCE among all pure CsPbI3‐based PSCs reported to date. In addition, an unencapsulated device showed excellent stability in ambient air. [ABSTRACT FROM AUTHOR]

Formamidinium methylammonium lead iodide (FAMAPbI3) perovskite has been intensively investigated as a potential photovoltaic material because it has higher phase stability than its pure FAPbI3 perovskite counterpart. However, its power conversion efficiency (PCE) is significantly inferior due to its high density of surface detects and mismatched energy level with electrodes. Herein, a bifunctional passivator, methyl haloacetate (methyl chloroacetate, (MClA), methyl bromoacetate (MBrA)), is designed to reduce defect density, to tune the energy levels and to improve interfacial charge extraction in the FAMAPbI3 perovskite cell by synergistic passivation of both CO groups and halogen anions. As predicted by modeling undercoordinated Pb2+, the MBrA shows a very strong interaction with Pb2+ by forming a dimer complex ([C6H10Br2O4Pb]2+), which effectively reduces the defect density of the perovskite and suppresses non‐radiative recombination. Meanwhile, the Br− in MBrA passivates iodine‐deficient defects. Consequently, the MBrA‐modified device presents an excellent PCE of 24.29%, an open‐circuit voltage (Voc) of 1.18 V (Voc loss ≈ 0.38 V), which is one of the highest PCEs among all FAMAPbI3‐based perovskite solar cells reported to date. Furthermore, the MBrA‐modified devices without any encapsulation exhibit remarkable long‐term stability with only 9% of PCE loss after exposure to ambient air for 1440 h. [ABSTRACT FROM AUTHOR]

Lasso peptides are a subclass of ribosomally synthesized and post-translationally modified peptides (RiPPs) and feature the threaded, lariat knot-like topology. The basic post-translational modifications (PTMs) of lasso peptide contain two steps, including the leader peptide removal of the ribosome-derived linear precursor peptide by an ATP-dependent cysteine protease, and the macrolactam cyclization by an ATP-dependent macrolactam synthetase. Recently, advanced bioinformatic tools combined with genome mining have paved the way to uncover a rapidly growing number of lasso peptides as well as a series of PTMs other than the general class-defining processes. Despite abundant reviews focusing on lasso peptide discoveries, structures, properties, and physiological functionalities, few summaries concerned their unique PTMs. In this review, we summarized all the unique PTMs of lasso peptides uncovered to date, shedding light on the related investigations in the future. [ABSTRACT FROM AUTHOR]

The single bulk‐heterojunction active layer based on non‐fullerene acceptors (NFAs) has dominated the power conversional efficiencies above 18% in state‐of‐the‐art organic solar cells (OSCs). However, a deep understanding of the relationship between charge carrier process and film microstructure remains unclear for emerging NFA OSCs. Herein, with the superstar PM6:Y6 blend as a model, the charge generation process in active layers is successfully manipulated by designing three different film microstructures, and they are correlated with the final photovoltaic performance in OSC devices. The amount of intermediate intra‐moiety excited states from the nanoscale Y6 aggregates can be effectively enhanced by controlling the phase separation domains and film crystallinity in the bicontinuous PM6:Y6 networks. This robustly improves the hole transfer, and thus promotes charge generation. As a result, the optimal films show superior device performance, that is, the high efficiencies of 16.53% and 17.98% for PM6:Y6‐ and D18:Y6‐based single junction OSCs, respectively. The results presented here give a rational guide for optimizing the charge carrier process through controlling morphological microstructures toward high‐performance NFA OSCs. [ABSTRACT FROM AUTHOR]

Inorganic CsPbI2Br perovskite is promising for solar cell applications due to its excellent thermal stability and optoelectronic characteristics. Unfortunately, the current high‐efficiency CsPbI2Br perovskite solar cells (PSCs) are mostly fabricated in an inert atmosphere due to their instability to moisture. Herein, a low‐dimensional intermediate‐assisted growth (LDIAG) method is reported for the deposition of CsPbI2Br film in ambient atmosphere by introducing imidazole halide (IMX: IMI and IMBr) into the precursor solution to control both nucleation and growth kinetics. The IMX first combines with PbI2 in the precursor film to form a 2D intermediate which then gradually releases PbI2 to slowly form high‐quality CsPbI2Br film during annealing. It is found that the LDIAG method produces a uniform, highly crystalline, pinhole‐free, and stable CsPbI2Br film with low defect density. Consequently, the solar cell efficiency is increased to as high as 17.26%, one of the highest for this type of device. Furthermore, the bare device without any encapsulation shows excellent long‐term stability with ≈86% of its initial efficiency retained after being exposed to the ambient environment for 1000 h. This work provides a perspective to tune the intermediate phases and crystallization pathway for high‐performance inorganic PSCs formed under ambient conditions. [ABSTRACT FROM AUTHOR]