Search

This paper proposes modified modulation and control schemes for power decoupling of single-stage single-phase Cuk inverter in continuous conduction mode. Because it has inherent two inductors at the input and output side, the Cuk inverter is able to step up/down the voltage with reduced input and output current ripples. Thus, smaller filtering capacitance, especially at the input side, can be used which increases its suitability for photovoltaic applications. For the maximum power point tracking control, the oscillating even order harmonic components should be eliminated from the inverter’s input side otherwise the maximum power cannot be extracted. The proposed modulation scheme will ease the control of inverter’s input and output sides. Therefore, the 2nd order harmonic in the input current can be eliminated without adding new active semiconductor switches. In addition, the paper presents a control scheme using fractional-order repetitive control with a conventional proportional-resonant controller. With this closed-loop controller, a sinusoidal output grid current can be generated and controlled while the input current is kept constant with time

This paper presents a modular grid-connected single-phase system based on series-connected current-source module integrated converters (MICs). The modular configuration improves the reliability, redundancy and scalability of photovoltaic (PV) distributed generators. In this system, each PV panel is connected to a dc/ac inverter to permit individual Maximum Power Point Tracking (MPPT) operation for each panel. Thus, the harvested power from the PV system will increase significantly. There are four different inverter topologies suitable to be used as MICs with different performances in terms of filtering elements size, power losses, efficiency, output voltage range, and high frequency transformers’ size. For the MPPT control, the oscillating even order harmonic components should be eliminated from the inverter’s input side otherwise the maximum power cannot be extracted. The proposed modulation scheme in this paper will ease the control of inverter’s input and output sides. Therefore, the 2nd order harmonic in the input current can be eliminated without adding new active semiconductor switches. A repetitive controller coupled with proportional-resonant controllers are employed to achieve accurate tracking for grid side as well as input side currents. Comparisons and performance evaluations for the proposed MICs are presented and validated with 1 kVA prototype controlled by TMS320F29335 DSP.

Large-scale grid-connected photovoltaic energy generation systems are progressing remarkably benefiting from the latest developments in solid-state semiconductors technology. In such systems, the photovoltaic arrays can be connected directly to the medium-voltage grid without employing a bulky line-frequency transformer to step up the voltage. Nano-crystalline cores with a small size and a high permeability operating at medium or high frequency can be installed in the power conversion stage. Hence, the necessary isolation as well as voltage boosting features can be provided. However, only a few power converters allow this type of isolation. This paper proposes a new modular converter structure suitable for medium-voltage grid connected systems with high-frequency isolation. The output voltages of the series-connected modules are added in order to provide the necessary voltage boosting. Four different power converter topologies with small input capacitors can be used as submodules for the presented medium-voltage configuration having different advantages and drawbacks. These different topologies are analysed in terms of power losses, footprint and functionality. To validate the mathematical analysis and the computer simulations, a scaled-down 5 kVA three-phase, 1 kV prototype is built and tested with four modules for each phase.

Irreversible electroporation for disinfection applications involve exposing the specimen cell-membrane to a pulsed electric field in order to kill harmful microorganisms. High voltage (HV) pulses of relatively short durations in range of few micro-seconds, are generated across the sample chamber. The HV pulse specifications such as: voltage magnitude, waveform, repetition rate, and duration differ according to the conditions of the sample being processed. This paper proposes a new step-up power electronic converter topology for generating the required HV pulses from a relatively low input voltage. The converter consists of two main stages; the first stage is responsible for boosting the input voltage to the desired level using input-parallel/output-series connected dc/dc modules while the second stage forms the required HV pulses with the proper magnitude, duration and repetition rate using modular multilevel converter sub-modules. The proposed topology is able to produce the HV pulses with controlled voltage and current stresses across the employed semiconductor switches and diodes, hence, it can be implemented with the market-available semiconductor technology. Mathematical analysis of the proposed topology is developed and MATLAB/Simulink simulation results explore operational conditions. Experimental results from a scaled-down prototype validate the functionality of the proposed system.

High-voltage (HV) pulses are used in electroporation to subject pulsed electric field (PEF) onto a sample under treatment. Pulse-waveform shape, voltage magnitude, pulse duration, and pulse repetition rate are the basic controllable variables required for particular PEF application. In practice, a custom-made pulse generator is dedicated for each PEF application with limited flexibility in changing these variables. In this paper, a universal pulse-waveform generator (UPG) is proposed, where the controller software algorithm can manipulate a basic generated multilevel pulse waveform to emulate many different PEF pulse waveforms. The commonly used PEF HV pulse waveforms can be generated as bipolar or monopolar with controllable pulse durations, repetition times, and voltage magnitudes. The UPG has the ability to generate multilevel pulses that have controllable dv/dt, which allows reduction of the electromagnetic interference generated by the converter. The UPG topology is based on half-bridge modular multilevel converter (HB-MMC) cells forming two transition arms in conjunction with two bistate arms, together creating an Hbridge. The HB-MMC cell capacitors provide a controllable energy source which charge from the dc input supply and discharge across the load, while the two bistate arms allow charging the HB-MMC cell capacitors. Hence, the UPG topology offers modularity, redundancy, and scalability. The HB-MMC individual cell capacitance is low and the cell voltages are balanced by employing the sorting and rotating algorithm used in conventional HB-MMC topologies for HV dc transmission applications. The viability of the proposed UPG converter is validated by MATLAB/Simulink simulation and scaled-down experimentation.

High-voltage (HV) pulses are used in pulsed electric field (PEF) applications to provide an effective electroporation process, a process in which harmful microorganisms are disinfected when subjected to a PEF. Depending on the PEF application, different HV pulse specifications are required such as the pulse-waveform shape, the voltage magnitude, the pulse duration, and the pulse repetition rate. In this paper, a generic pulsewaveform generator (GPG) is proposed, and the GPG topology is based on half-bridge modular multilevel converter (HB-MMC) cells. The GPG topology is formed of four identical arms of series-connected HB-MMC cells forming an H-bridge. Unlike the conventional HB-MMC-based converters in HVdc transmission, the GPG load power flow is not continuous which leads to smaller size cell capacitors utilization; hence, smaller footprint of the GPG is achieved. The GPG topology flexibility allows the controller software to generate a basic multilevel waveform which can be manipulated to generate the commonly used PEF pulse waveforms. Therefore, the proposed topology offers modularity, redundancy, and scalability. The viability of the proposed GPG converter is validated by MATLAB/Simulink simulation and experimentation.

The role of irreversible electroporation using pulsed electric field is to generate high-voltage (HV) pulses with a predefined magnitude and duration. These HV pulses are applied to the treatment chamber until decontamination of the sample is completed. In this paper, a new topology for HV rectangular pulse generation for water disinfection applications is introduced. The proposed topology has four arms comprised of series-connected half bridge modular multilevel converter cells. The rectangular pulse characteristics can be controlled via the software controller without any physical changes in power topology. The converter is capable of generating both bipolar and monopolar HV pulses with microsecond pulse durations at high a frequency rate with different characteristics. Hence, the proposed topology provides flexibility by software control, along with hardware modularity, scalability, and redundancy. Moreover, a cell's capacitance is relatively small, which drastically reduces the converter footprint. The adopted charging and discharging process of the cell capacitors in this topology eliminate the need of any voltage measurements or complex control for cell-capacitors voltage balance. Consequently, continuity of converter operation is assured under cell malfunction. In this paper, analysis and cell-capacitor sizing of the proposed topology are detailed. Converter operation is verified using MATLAB/Simulink simulation and scaled experimentation.