Search

Introduction: assess the factors helping successful angioplasty of the popliteal artery of patient with critical limb ischemia including popliteal alone or concomitant infra-popliteal disease. Methods: a prospective study of symptomatic patients with popliteal occlusive lesions treated by balloon angioplasty. All patients underwent systematic preoperative and postoperative color duplex scan and preoperative angiography. The principal endpoints were primary and primary assisted patency. Results: 51 patients were included in our study, they had a mean age 60.2 ± 10.2 years old. Males were more prevalent among the included patients 68.7% males versus 31.4% females. Comparison of final amputation outcomes among patients showed that patient with dyslipidemia is more borne to undergo major amputation with p value 0.04, hypertensive patients who are also more commonly underwent major amputation with p value 0.02. Moreover, CKD patients were at higher risk for major amputations with p value 0.0001. Regarding clinical presentation, patients with rest pains didn’t undergo any major or minor amputation with p value 0.005, as well as patients with minor tissue loss with p value 0.0001, on the contrary, patients with major tissue loss were more borne for major amputation with p value 0.0001. Patients with arterial stenosis did not commonly undergo major amputation with p value 0.001, while those with total occlusion were at more risk for major amputation with p value 0.001. Conclusion: Major amputation in patients with critical limb ischemia is significantly associated with dyslipidemia, hypertension and CKD. Total arterial occlusion is significantly associated with need for major amputation. [ABSTRACT FROM AUTHOR]

Constrained codes are used to prevent errors from occurring in various data storage and data transmission systems. They can help in increasing the storage density of magnetic storage devices, in managing the lifetime of solid-state storage devices, and in increasing the reliability of data transmission over wires. Over the years, designing practical (complexity-wise) capacity-achieving constrained codes has been an area of research gaining significant interest. We recently designed various constrained codes based on lexicographic indexing. We introduced binary symmetric lexicographically-ordered constrained (S-LOCO) codes, $q$ -ary asymmetric LOCO (QA-LOCO) codes, and a class of two-dimensional LOCO (TD-LOCO) codes. These families of codes achieve capacity with simple encoding and decoding, and they are easy to reconfigure. We demonstrated that these codes can contribute to notable density and lifetime gains in magnetic recording (MR) and Flash systems, and they find application in other systems too. In this paper, we generalize our work on LOCO codes by presenting a systematic method that guides the code designer to build any constrained code based on lexicographic indexing once the finite set of data patterns to forbid is known. In particular, we connect the set of forbidden patterns directly to the cardinality of the LOCO code and most importantly to the rule that uncovers the index associated with a LOCO codeword. By doing that, we reveal the secret arithmetic of patterns, and make the design of such constrained codes significantly easier. We give examples illustrating the method via codes based on lexicographic indexing from the literature. We then design optimal (rate-wise) constrained codes for the new two-dimensional magnetic recording (TDMR) technology. Over a practical TDMR model, we show notable performance gains as a result of solely applying the new codes. Moreover, we show how near-optimal constrained codes for TDMR can be designed and used to further reduce complexity and error propagation. All the newly introduced LOCO codes are designed using the proposed general method, and they inherit all the desirable properties in our previously designed LOCO codes. [ABSTRACT FROM AUTHOR]

In order to accommodate the ever-growing data from various, possibly independent, sources and the dynamic nature of data usage rates in practical applications, modern cloud data storage systems are required to be scalable, flexible, and heterogeneous. The recent rise of the blockchain technology is also moving various information systems towards decentralization to achieve high privacy at low costs. While codes with hierarchical locality have been intensively studied in the context of centralized cloud storage due to their effectiveness in reducing the average reading time, those for decentralized storage networks (DSNs) have not yet been discussed. In this paper, we propose a joint coding scheme where each node receives extra protection through the cooperation with nodes in its neighborhood in a heterogeneous DSN with any given topology. This work extends and subsumes our prior work on coding for centralized cloud storage. In particular, our proposed construction not only preserves desirable properties such as scalability and flexibility, which are critical in dynamic networks, but also adapts to arbitrary topologies, a property that is essential in DSNs but has been overlooked in existing works. [ABSTRACT FROM AUTHOR]

In various practical systems, certain data patterns are prone to errors if written or transmitted. In magnetic recording and communication over transmission lines, data patterns causing consecutive transitions that are not sufficiently separated are prone to errors. In Flash memory with two levels per cell, data patterns causing high–low–high charge levels on adjacent cells are prone to errors. Constrained codes are used to eliminate error-prone patterns, and they can also achieve other goals. Recently, we introduced efficient binary symmetric lexicographically-ordered constrained (LOCO) codes and asymmetric LOCO (A-LOCO) codes to increase density in magnetic recording systems and lifetime in Flash systems by eliminating the relevant detrimental patterns. Due to their application, LOCO and A-LOCO codes are associated with level-based signaling. Studying the power spectrum of a random signal with certain properties is principal for any storage or transmission system. It reveals important properties such as the average signal power at DC, the bandwidth of the signal, and whether there are discrete power components at certain frequencies. In this paper, we first modify a framework from the literature in order to introduce a method to derive the power spectrum of a sequence of constrained data associated with level-based signaling. We apply our method to infinitely long sequences satisfying symmetric and asymmetric constraints. Next, we show how to generalize the method such that it works for a stream of finite-length codewords as well, thus demonstrating how to overcome the associated finite-length challenges. We use the generalized method to devise closed forms for the spectra of finite-length LOCO and A-LOCO codes from their transition diagrams. Our LOCO and A-LOCO spectral derivations can be performed for any code length and can be extended to other constrained codes. We plot these power spectra, and discuss various important spectral properties for both LOCO and A-LOCO codes. We also briefly discuss an alternative method for deriving the power spectrum and introduce an idea towards reaching the spectra of self-clocked codes. [ABSTRACT FROM AUTHOR]

The two-dimensional magnetic recording (TDMR) technology promises storage densities of 10 Tbits/in2. However, when tracks are squeezed together, a bit stored in the two-dimensional (TD) grid suffers inter-symbol interference (ISI) from adjacent bits in the same track and inter-track interference (ITI) from nearby bits in the adjacent tracks. A bit is highly likely to be read incorrectly if it is isolated in the middle of a $3 \times 3$ square, surrounded by its complements, horizontally and vertically. We improve the reliability of TDMR systems by designing TD constrained codes that prevent these square isolation patterns. We exploit the way TD read heads operate to design our codes, and we focus on TD read heads that collect signals from three adjacent tracks. We represent the two-dimensional square isolation constraint as a one-dimensional constraint on an alphabet of eight non-binary symbols. We use this new representation to construct a non-binary lexicographically-ordered constrained code where one third of the input information bits are unconstrained. Our TD constraint codes are capacity-achieving, and the data protection is achieved with redundancy less than 3% and at modest complexity. [ABSTRACT FROM AUTHOR]

The increasing demand for access to data has led to dramatic increases in data storage densities, and as densities increase, new sources of error appear. Multi-dimensional (MD) graph-based codes are capable of mitigating error sources like interference and channel non-uniformity in dense storage devices. A recent innovation improves the performance of MD spatially-coupled codes that are based on circulants by carefully relocating some circulants to minimize the number of short cycles. However, cycles become more detrimental when they combine together to form more advanced objects, e.g., absorbing sets, including low-weight codewords. In this paper, we show how MD relocations can be exploited to minimize the number of detrimental objects in the graph of an MD code. Moreover, we demonstrate the savings in the number of relocation arrangements earned by focusing on objects rather than their constituent cycles. Our technique is applicable to a wide variety of one-dimensional (OD) codes. Simulation results demonstrate significant lifetime gains achieved by the proposed MD codes on an industry-recommended model for Flash systems, and signal-to-noise ratio gains on an industry-recommended model for magnetic recording systems, both with respect to OD codes with similar parameters. The second order analysis of MD relocations relies on conditions and options for an object, called a pattern, to form a bigger cycle after MD relocations, which are discussed in this paper. [ABSTRACT FROM AUTHOR]

Because of their capacity-approaching performance and their complexity/latency advantages, spatially-coupled (SC) codes are among the most attractive error-correcting codes for use in modern dense data storage systems. SC codes are constructed by partitioning an underlying block code and coupling the partitioned components. Here, we focus on circulant-based SC codes. Recently, the optimal overlap (OO), circulant power optimizer (CPO) approach was introduced to construct high performance SC codes for additive white Gaussian noise (AWGN) and Flash channels. The OO stage operates on the protograph of the SC code to derive the optimal partitioning that minimizes the number of graphical objects that undermine the performance of SC codes under iterative decoding. Then, the CPO optimizes the circulant powers to further reduce this number. Since the nature of detrimental objects in the graph of a code critically depends on the characteristics of the channel of interest, extending the OO-CPO approach to construct SC codes for channels with intrinsic memory is not a straightforward task. In this paper, we tackle one relevant extension; we construct high performance SC codes for practical 1-D magnetic recording channels, i.e., partial-response (PR) channels. Via combinatorial techniques, we carefully build and solve the optimization problem of the OO partitioning, focusing on the objects of interest in the case of PR channels. Then, we customize the CPO to further reduce the number of these objects in the graph of the code. SC codes designed using the proposed OO-CPO approach for PR channels outperform prior state-of-the-art SC codes by up to around 3 orders of magnitude in frame error rate (FER) and 1.1 dB in signal-to-noise ratio (SNR). More intriguingly, our SC codes outperform structured block codes of the same length and rate by up to around 1.8 orders of magnitude in FER and 0.4 dB in SNR. The performance advantage of SC codes designed using the devised OO-CPO approach over block codes of the same parameters is not only pronounced in the error floor region, but also in the waterfall region. [ABSTRACT FROM AUTHOR]

Line codes make it possible to mitigate interference, to prevent short pulses, and to generate streams of bipolar signals with no direct-current (DC) power content through balancing. They find application in magnetic recording (MR) devices, in Flash devices, in optical recording devices, and in some computer standards. This paper introduces a new family of fixed-length, binary constrained codes, named lexicographically-ordered constrained codes (LOCO codes), for bipolar non-return-to-zero signaling. LOCO codes are capacity-achieving, the lexicographic indexing enables simple, practical encoding and decoding, and this simplicity is demonstrated through analysis of circuit complexity. LOCO codes are easy to balance, and their inherent symmetry minimizes the rate loss with respect to unbalanced codes having the same constraints. Furthermore, LOCO codes that forbid certain patterns can be used to alleviate inter-symbol interference in MR systems and inter-cell interference in Flash systems. Numerical results demonstrate a gain of up to 10% in rate achieved by LOCO codes with respect to other practical constrained codes, including run-length-limited codes, designed for the same purpose. Simulation results suggest that it is possible to achieve a channel density gain of about 20% in MR systems by using a LOCO code to encode only the parity bits, limiting the rate loss, of a low-density parity-check code before writing. [ABSTRACT FROM AUTHOR]

Non-binary (NB) low-density parity-check (LDPC) codes are graph-based codes that are increasingly being considered as a powerful error correction tool for modern dense storage devices. Optimizing NB-LDPC codes to overcome their error floor is one of the main code design challenges facing storage engineers upon deploying such codes in practice. Furthermore, the increasing levels of asymmetry incorporated by the channels underlying modern dense storage systems, e.g., multi-level Flash systems, exacerbate the error floor problem by widening the spectrum of problematic objects that contribute to the error floor of an NB-LDPC code. In a recent research, the weight consistency matrix (WCM) framework was introduced as an effective combinatorial NB-LDPC code optimization methodology that is suitable for modern Flash memory and magnetic recording (MR) systems. The WCM framework was used to optimize codes for asymmetric Flash channels, MR channels that have intrinsic memory, in addition to canonical symmetric additive white Gaussian noise channels. In this paper, we provide an in-depth theoretical analysis needed to understand and properly apply the WCM framework. We focus on general absorbing sets of type two (GASTs) as the detrimental objects of interest. In particular, we introduce a novel tree representation of a GAST called the unlabeled GAST tree, using which we prove that the WCM framework is optimal in the sense that it operates on the minimum number of matrices, which are the WCMs, to remove a GAST. Then, we enumerate WCMs and demonstrate the significance of the savings achieved by the WCM framework in the number of matrices processed to remove a GAST. Moreover, we provide a linear-algebraic analysis of the null spaces of WCMs associated with a GAST. We derive the minimum number of edge weight changes needed to remove a GAST via its WCMs, along with how to choose these changes. In addition, we propose a new set of problematic objects, namely oscillating sets of type two (OSTs), which contribute to the error floor of NB-LDPC codes with even column weights on asymmetric channels, and we show how to customize the WCM framework to remove OSTs. We also extend the domain of the WCM framework applications by demonstrating its benefits in optimizing column weight 5 codes, codes used over Flash channels with additional soft information, and spatially coupled codes. The performance gains achieved via the WCM framework range between 1 and nearly 2.5 orders of magnitude in the error floor region over interesting channels. [ABSTRACT FROM AUTHOR]

Spatially-coupled (SC) codes are a family of graph-based codes that have attracted significant attention, thanks to their capacity approaching performance and low decoding latency. An SC code is constructed by partitioning an underlying block code into a number of components and coupling their copies together. In this paper, we first introduce a general approach for the enumeration of detrimental combinatorial objects in the graph of finite-length SC codes. Our approach is general in the sense that it effectively works for SC codes with various partitioning schemes, column weights, and memories. Next, we present a two-stage framework for the construction of high performance binary SC codes optimized for the additive white Gaussian noise channels; we aim at minimizing the number of detrimental combinatorial objects in the error floor region. In the first stage, we deploy a novel partitioning scheme, called the optimal overlap partitioning, to produce the optimal partitioning corresponding to the smallest number of detrimental objects. In the second stage, we apply a new circulant power optimizer to further reduce the number of detrimental objects in the lifted graph. SC codes constructed by our new framework have up to two orders of magnitude error floor performance improvement and up to 0.6 dB SNR gain compared to prior state-of-the-art SC codes. [ABSTRACT FROM AUTHOR]

In magnetic recording systems, consecutive sections experience different signal-to-noise ratios (SNRs). To perform error correction over these systems, one approach is to use an individual block code for each section. However, the performance over a section affected by a lower SNR is weaker compared to the performance over a section affected by a higher SNR. Spatially-coupled (SC) codes are a family of graph-based codes with capacity approaching performance and low latency decoding. An SC code is constructed by partitioning an underlying block code to several component matrices, and coupling copies of the component matrices together. The contribution of this paper is threefold. First, we present a new partitioning technique to efficiently construct SC codes with column weights 4 and 6. Second, we present an SC code construction for channels with SNR variation. Our SC code construction provides local error correction for each section by means of the underlying codes that cover one section each, and simultaneously, an added level of error correction by means of coupling among the underlying codes. Third, we introduce a low-complexity interleaving scheme specific to SC codes that further improves their performance over channels with SNR variation. Our simulation results show that our SC codes outperform individual block codes by more than one and two orders of magnitudes in the error floor region compared to the block codes with and without regular interleaving, respectively. This improvement is more pronounced by increasing the memory and column weight. [ABSTRACT FROM AUTHOR]

Spatially coupled (SC) codes are a class of sparse graph-based codes known to have capacity-approaching performance. SC codes are constructed based on an underlying low-density parity-check (LDPC) code, by first partitioning the underlying block code and then putting replicas of the components together. Significant recent research efforts have been devoted to the asymptotic, ensemble-averaged study of SC codes, as these coupled variants of the existing LDPC codes offer excellent properties. While the asymptotic analysis is important, due to simplifying assumptions and averaging effects, results from the asymptotic domain are not readily translatable to the practical, finite-length setting. Despite this chasm, the finite-length analysis of SC codes is still largely unexplored. In this paper, we tackle the problem of optimized design of SC codes in the context of magnetic-recording (MR) applications. In particular, we identify combinatorial structures in the graphical representation of the code that are detrimental in the MR setting. An intriguing observation is that for the same SC code, the problematic objects for the MR channels are combinatorially different from the additive white Gaussian noise (AWGN) setting, thus necessitating a careful code design approach for the MR applications. We first demonstrate that the choice of the so-called cutting vector, which guides the code partitioning in the SC code design, directly affects the cardinality of these problematic objects. In particular, we show that the number of problematic objects is the highest—and consequently that the performance is the worst—in the case of the degenerate cutting vector, which precisely corresponds to uncoupled LDPC block codes. We, therefore, show that coupling always improves the performance and that the degree of improvement is dependent on the choice of the cutting vector. We then extend our analysis to different column weights and present SC codes that outperform block codes with unoptimized edge weights by more than 3.5 orders of magnitude and that also outperform both optimized block codes and unoptimized SC codes by more than two orders of magnitude. Through presented examples, we demonstrate high performance of the proposed code design methodology. [ABSTRACT FROM AUTHOR]

Transmission channels underlying modern dense storage systems, e.g., Flash memory and magnetic recording (MR) systems, significantly differ from canonical channels, like additive white Gaussian noise (AWGN) channels. While existing low-density parity-check (LDPC) codes optimized for symmetric, AWGN-like channels are being actively considered for Flash applications, we demonstrate that, due to channel asymmetry, such approaches are inadequate. We introduce a refined definition of absorbing sets, which we call general absorbing sets of type two (GASTs), and study the combinatorial properties of GASTs. We then present the weight consistency matrix (WCM), which succinctly captures key properties in a GAST. Furthermore, we show how to customize the WCM definition such that it suits other special subclasses of GASTs. Based on these new concepts, we then develop a new, general combinatorial code optimization framework, which we call the WCM framework, and demonstrate its effectiveness on the realistic highly-asymmetric normal-Laplace mixture (NLM) Flash channel. Moreover, we show that our framework can be customized to optimize non-binary LDPC (NB-LDPC) codes for other asymmetric channels, channels with memory (incorporated in MR systems), and canonical symmetric channels. For all the channels we have simulated NB-LDPC codes over, the codes optimized using the WCM framework enjoy at least 1 order, and up to nearly 2 orders of magnitude performance gain in the uncorrectable bit error rate (UBER) or the frame error rate (FER) relative to the unoptimized codes. Our simulations also show that codes optimized for symmetric channels are not the best choice for asymmetric channels. [ABSTRACT FROM PUBLISHER]

In this paper, we provide a comprehensive analysis of the error floor along with code optimization guidelines for structured and regular non-binary low-density parity-check (NB-LDPC) codes in magnetic recording (MR) applications. While the topic of the error floor performance of binary LDPC codes over additive white Gaussian noise (AWGN) channels has recently received considerable attention, very little is known about the error floor performance of NB-LDPC codes over other types of channels, despite the early results demonstrating superior characteristics of NB-LDPC codes relative to their binary counterparts. We first show that, due to the outer looping between the detector and the decoder in the receiver, the error profile of NB-LDPC codes over partial-response (PR) channels is qualitatively different from the error profile over AWGN channels—this observation motivates us to introduce new combinatorial objects aimed at capturing decoding errors that dominate the PR channel error floor region. We call these objects balanced absorbing sets (BASs), which are viewed as a special subclass of previously introduced absorbing sets (ASs). Aided by these new objects (BASs), we develop a method that combines analytical equations and biased simulations to predict the error floor performance of NB-LDPC codes over PR channels without the need to execute extensive Monte Carlo (MC) simulations. We show that explicitly incorporating the inter-symbol interference of MR channels into our prediction method makes the accuracy of the error floor estimate within 0.2 of an order of magnitude from the traditional MC simulation. In addition, we prove that, due to the more restrictive definition of BASs (relative to the more general class of ASs), an additional degree of freedom can be exploited in the code design for PR channels. We then demonstrate that the proposed code optimization aimed at removing dominant BASs offers performance improvements in the frame error rate in the error floor region by up to 2.5 orders of magnitude over the unoptimized designs. Our code optimization technique carefully, yet provably, removes BASs from the code while preserving its overall structure (node degree, quasi-cyclic property, regularity, and so forth). The resulting codes outperform the existing binary and NB-LDPC solutions for PR channels by about 2.5 and 1.25 orders of magnitude, respectively. [ABSTRACT FROM AUTHOR]