Search

Phytohormones, epigenetic regulation and environmental factors regulate fruit ripening but their interplay during strawberry fruit ripening remains to be determined. In this study, bagged strawberry fruit exhibited delayed ripening compared with fruit grown in normal light, correlating with reduced abscisic acid (ABA) accumulation. Transcription of the key ABA catabolism gene, ABA 8′‐hydroxylase FaCYP707A4, was induced in bagged fruit. With light exclusion whole genome DNA methylation levels were up‐regulated, corresponding to a delayed ripening process, while DNA methylation levels in the promoter of FaCYP707A4 were suppressed, correlating with increases in transcript and decreased ABA content. Experiments indicated FaCRY1, a blue light receptor repressed in bagged fruit and FaAGO4, a key protein involved in RNA‐directed DNA methylation, could bind to the promoter of FaCYP707A4. The interaction between FaCRY1 and FaAGO4, and an increased enrichment of FaAGO4 directed to the FaCYP707A4 promoter in fruit grown under light suggests FaCRY1 may influence FaAGO4 to modulate the DNA methylation status of the FaCYP707A4 promoter. Furthermore, transient overexpression of FaCRY1, or an increase in FaCRY1 transcription by blue light treatment, increases the methylation level of the FaCYP707A4 promoter, while transient RNA interference of FaCRY1 displayed opposite phenotypes. These findings reveal a mechanism by which DNA methylation influences ABA catabolism, and participates in light‐mediated strawberry ripening. [ABSTRACT FROM AUTHOR]

Exploiting narrow-bandwidth-emission fluorescent materials is crucial for next-generation wide-color gamut displays. Inspired by the narrow-bandwidth-emission characteristic of chlorophyll derivates, the present work develops a facile strategy to synthesize a series of red-emitting chlorophyll-structured CDs (CHL-CDs) with ultra-high color purity and good carrier mobility from different traditional Chinese medicine leaves through a simple cross-linking polymerization and carbonization process. The obtained CHL-CDs exhibit bright photoluminescence centered at 671 nm, ultra-high color purity with an FWHM of 23 nm, and a high photoluminescence quantum yield of up to 62%. More importantly, based on in-depth experimental and theoretical studies on the macroscopic host–guest interactions and microscopic interfacial interactions between the CHL-CDs and charge transporting materials, high-performance red electroluminescent light-emitting diodes are successfully prepared, with FWHM of only 28 nm, turn-on voltage of 3.7 V, maximum luminance of 623 cd m−2, and maximum current efficiency of 0.26 cd A−1. This study provides a universal platform for fabricating narrow-bandwidth-emission CDs with significant applications in photoelectric devices. [ABSTRACT FROM AUTHOR]

The cylinder liner and piston ring form the most crucial friction pair in the diesel engine, contributing 35–40% of its overall friction losses. Recent research indicates that transient heat transfer significantly affects piston ring lubrication. However, the impact of such a transfer on varying surface textures and lubrication traits remains unclear. This paper takes the piston ring–cylinder liner of a certain diesel engine as the research object, which is based on a two-dimensional averaged Reynolds function and Greenwood–Tripp micro convex body contact model; establishes a numerical calculation model of the transient heat fluid lubrication characteristics of a vertical piston ring–cylinder liner assembly by combining the oil film thickness equation, energy equation, lubricating oil viscosity–temperature, and viscosity pressure characteristics; avoids large errors associated with assuming different temperature values for lubricants; and also uses the cylinder liner surface texturing technique to examine the effects of surface texturing on lubrication properties in the presence of transient thermal fluids. The findings indicate that employing transient thermal fluid for determining the mean value of the oil film temperature in isothermal lubrication calculations yields comparable values for minimum oil film thickness and frictional power consumption, while the friction power consumption calculated by the transient thermal fluid is slightly lower. The depth of the recesses on the surface of the cylinder liner should be minimized, while the radius of the texture should be maximized, taking into consideration the current circumstances. Compared with a cylindrical texture, a spherical texture achieves lower friction with good lubrication indexes. [ABSTRACT FROM AUTHOR]

Highly sensitive and selective electrochemical sensors are essential for human health, especially for monitoring the state of environmental pollutant content. Here, Cu2O nanocubes uniformly decorated with Ag nanoparticles were synthesized by a tractable wet‐chemical method. The electrochemical studies confirm that the Cu2O‐Ag‐16 composite shows increased electrochemical activity for catechol determination compared with either the bare Cu2O or the other two as‐proposed Cu2O−Ag catalysts (Cu2O−Ag‐8, Cu2O−Ag‐24). More specifically, the Cu2O−Ag‐16 presents excellent electrochemical responses towards catechol detection over wide linear ranges of 0.05 μM – 1 mM and 1 mM – 5 mM, with high sensitivity and low detection limits (50 nM). Furthermore, the as‐proposed sensor also displays good reproducibility, with a relative standard deviation of 2.3 % (n=3). Satisfactory recoveries in the range of 98.3 % to 101.2 % or 98 % to 100.7 % for lake water and/or tap water indicate the reliability of the sensor for catechol detection in practical applications. Constructing such composite structures to manipulate the local charge distribution for outstanding electrochemical sensing properties would provide us with an innovative strategy to explore other highly efficient electrode materials. [ABSTRACT FROM AUTHOR]

The working temperature affects the performance of PEMFC, so a reasonable and efficient cooling channel is necessary to control the working temperature in an efficient area. In this study, the channel structure of the bipolar plate for PEMFC is analyzed using the FLUENT simulation calculation method. The influence of cell size and cooling water flow direction on cell temperature distribution is analyzed, including an examination of the channel ridge width, depth, and aspect ratio of the bipolar plate. After comparing and analyzing three ridge width sizes (0.5 mm, 1.5 mm and 2 mm) in the paper, it was found that a ridge width of 2 mm had the best heat transfer performance. And it was found that a groove depth of 0.5 mm had the best heat transfer performance when comparing three groove depth dimensions (0.5 mm, 1 mm and 1.5 mm). The aspect ratio size parameters had almost no effect on the maximum and average temperatures of the electric stacks, while the relative flow direction of cooling water had a great influence on the temperature distribution of the bipolar plate. [ABSTRACT FROM AUTHOR]

Understanding the effect of H2O adsorption on reactant activation is of great importance in heterogeneous catalysis, which remains a grand challenge particularly in oxide catalyst systems with structural complexity. Herein, the effect of D2O adsorption on D2 activation over MgO nanocatalysts at different temperatures has been investigated by transmission Fourier transform infrared (FT-IR) and temperature-programmed desorption (TPD). Two sets of hydride and hydroxyl species produced from D2 dissociation at more active and less active Mg-O pairs can be observed by FT-IR, which all desorb via the product of D2 as confirmed by TPD experiments. We find that the physically adsorbed D2O overlayer does not affect the dissociation of D2 since D2 may pass through the molecular layer and access the surface-active sites. When D2O is partially dissociated on the MgO surface, D2 can only dissociate at the remaining active sites until that dissociated −ODw groups from D2O occupy all active sites. These findings provide a fundamental understanding of the effect of water adsorption on D2 activation on oxide catalysts. [ABSTRACT FROM AUTHOR]

Two kinds of triphenylamine‐derived solid‐state emissive carbon dots (CDs) with orange and yellow color are facilely synthesized through solvothermal treatment, taking advantage of the nonplanar structure and good carrier mobility of triphenylamine unit. Theoretical calculations show that the triphenylamine structure could greatly inhibit the direct π–π stacking of aromatic skeletons and enhance the fluorescence properties of CDs in aggregation state. By adopting the CDs as single emissive layer, high‐performance orange‐color and green‐color electroluminescent light‐emitting diodes (LEDs) are successfully fabricated, with maximum brightness of 9450/4236 cd m−2, high current efficiency of 1.57/2.34 cd A−1 and low turn‐on voltage of 3.1/3.6 eV are respectively achieved. Significantly, white‐color LED device is further prepared. This work provides a universal platform for the construction of novel solid‐state emissive CDs with significant applications in photoelectric device. [ABSTRACT FROM AUTHOR]

The stability of symbiotic flora is an important indicator of the health of an organism. Symbiotic bacteria have been proven to be closely involved in the immune process of organisms. The pathogenicity of Beauveria bassiana was studied in relation to symbiotic bacteria on the surface and inside of the migratory locust (Locusta migratoria). The results showed that the surface disinfection of test locusts contributed to the pathogenicity of B. bassiana to locusts. Most of the surface bacteria of L. migratoria caused some inhibition of B. bassiana growth, and LM5-4 (Raoultella ornithinolytica), LM5-2 (Enterobacter aerogenes), and LM5-13 (Citrobacter freundii) showed the highest inhibitory effect on the growth of B. bassiana. The inoculation of locusts with additional surface symbiotic bacteria reduced the virulence of B. bassiana to L. migratoria. Infection by different strains of B. bassiana caused similar changes in the symbiotic flora of migratory locusts. The inoculation of locusts with additional intestinal symbiotic bacteria (Enterobacter sp.) reduced the virulence of B. bassiana to L. migratoria. These findings illustrate the effect of bacterial communities on fungal infections in L. migratoria when seen from the perspective of ecology in a microenvironment. The active antifungal substances of such bacteria and their mechanisms of action need further study. [ABSTRACT FROM AUTHOR]

Highlights: Cutting path Planning System for wafer images without Mark points in different imaging states. Use the interlayer in the chip region as an auxiliary location to determine the cutting path. The determined cutting path is located in the middle of the streets, away from the chip region. Microscopic imaging is easily affected by the strength of illumination, and the chip surface qualities of different wafers are different. Therefore, wafer images have defects such as uneven brightness distribution, obvious differences in chip region characteristics, etc., which affect the positioning accuracy of the wafer cutting path. For this reason, this thesis proposes an automatic chip-cutting path-planning method in the wafer image of the Glass Passivation Parts (GPPs) process without a mark. First, the wafer image is calibrated for brightness. Then, the template matching algorithm is used to determine the chip region and the center of gravity position of the chip region. We find the position of the geometric feature (interlayer) in the chip region, and the interlayer is used as an auxiliary location to determine the final cutting path. The experiment shows that the image quality can be improved, and chip region features can be highlighted when preprocessing the image with brightness calibration. The results show that the average deviation of the gravity coordinates of the chip region in the x direction is 2.82 pixels. We proceeded by finding the interlayer in the chip region, marking it with discrete points, and using the improved Random Sample Consensus (RANSAC) algorithm to remove the abnormal discrete points and fit the remaining discrete points. The average fitting error is 0.8 pixels, which is better than the least squares method (LSM). The cutting path location algorithm proposed in this paper can adapt to environmental brightness changes and different qualities of chips, accurately and quickly determine the cutting path, and improve the chip cutting yield. [ABSTRACT FROM AUTHOR]

In this work, graphite and diamond are successfully introduced into Al melts and TiC is in situ-synthesized based on reactive wetting. It is found that the microstructures of the prepared TiC-reinforced Al composites are varied with the change in carbon sources and their sizes. TiC particles tend to form agglomerations in the composites prepared by both graphite and diamond, but the size of the TiC particles as well as their agglomerations will decrease with the decrease in the carbon source size. In addition, the Ti-C reaction is also difficult to fully carry out due to the influence of the Al-C reaction. As a result, in addition to TiC particles, Al4C3 will also be present in the composites prepared by graphite, especially when the size of graphite is large. As for the composites prepared by diamond, diamond@Al4C3@TiC core–shell particles will form when the size of the diamond is large, such as 10 μm in this work, and these particles will transform into Al4C3@TiC core–shell particles when the size of the diamond is decreased. [ABSTRACT FROM AUTHOR]

When it comes to building high-efficiency thin-film optoelectronic devices, we are constantly striving to improve the efficiency of charge transport and injection. Device performance is hampered by the low mobility and injection ability of organic charge transporting materials that are routinely used. In this paper, we show that instead of using organics as a hole transporting layer, metal halide perovskite can be used to fabricate high-efficiency carbon dots-based light-emitting diodes for the first time. The organic light-emitting layer and the underlying perovskite layer combine to form an organic–inorganic perovskite planar heterojunction, and the sufficient contact at the junction takes advantage of the high charge mobility of perovskite, facilitating the hole transportation and injection. Moreover, the interaction between perovskite and the organic emitting layer can be engineered via manipulating the halogenic component, thickness, surface morphology, etc., contributing to the device optimization and the understanding of the carrier kinetics in this unique organic–inorganic hybrid optoelectronic device. Our work comprehensively evaluates the full potentials of metal halide perovskite as a hole transporting layer by uncovering the positive effect on hole transportation and injection. As a consequence, our findings open up new avenues for the development of efficient carbon dot-based light-emitting diodes. [ABSTRACT FROM AUTHOR]

E or pyriminobac-methyl (EPM), a pyrimidine benzoic acid esters herbicide, has a high potential as weedicide; nevertheless, its environmental behaviors are still not well understood. In this study, we systematically investigated, for the first time, the adsorption–desorption, degradation, and leaching behaviors of EPM in agricultural soils from five exemplar sites in China (Phaeozems – S1 ; Anthrosol – S2 ; Ferralsol – S3 ; Alisol – S4 ; Plinthosol – S5) through laboratory simulation experiments. Our results show that the EPM adsorption–desorption results were well fitted by the Freundlich model (R2>0.9999). In the analyzed soils, the Freundlich adsorption (i.e., Kf ads) and desorption (i.e., Kf des) coefficients of EPM varied between 0.85 and 32.22 mg 1-1/n L 1/n kg -1 and 0.78–5.02 mg 1-1/n L 1/n kg -1 , respectively. The mobility of EPM in soils S1 – S5 was categorized as immobile, slightly immobile, highly mobile, slightly mobile, and slightly mobile, respectively. Moreover, the degradation of EPM reflected first-order kinetics, where its half-life ranged between 37.46 and 66.00 d, depending on the environmental conditions, and abiotic degradation was predominant in the degradation of this compound. Overall, the high leaching ability and desorption capacity of EPM were accompanied by a low adsorption capacity, and there were no significant relationships between pH and the leaching rate of EPM in the five types of soils. In contrast, the organic matter content, cation exchange capacity, and soil clay content were the main components responsible for the observed leaching rates. We found that EPM degrades easily, has a high adsorption affinity, and a low mobility in S1 , which results in a low contamination risk for groundwater systems. On the contrary, this compound degrades slowly in S2 , S3 , S4 , and S5 , due to a low adsorption affinity and moderate mobility, which results in a high contamination risk for groundwater systems. Therefore, our results may serve as a reference for evaluating the risks involved in the increasingly wide application of this compound. [ABSTRACT FROM AUTHOR]

Metal halide perovskite light-emitting diodes (PeLEDs) are a new type of electroluminescent device with wide application in flat-panel displays and solid-state lighting. The charge recombination at the electrode interfaces and within the emission layer are the key factors restricting the performance of PeLEDs. In this work, the charge transport layers on both sides of the perovskite are optimized simultaneously to reduce the energy loss at the interfaces. Solution-processed aluminum-doped zinc oxide (AZO) nanoparticles are introduced as the electron transport layer in the traditional device structure, which effectively simplifies the device manufacturing process and greatly improves the device performance. Furthermore, an ultra-thin polymethyl methacrylate (PMMA) layer is introduced as a tunneling layer to reduce the exciton quenching between the hole transport layer and the perovskite emission layer. Poly(2-ethyl-2-oxazoline) (PEOX) is used as an additive to significantly enhance the solvent resistance of the perovskite layer. By collaborative optimization, a deep red PeLED emitting at 683 nm with a turn-on voltage of only 1.6 V and a maximum brightness of 7798 cd m−2 is achieved, providing a new idea for the development of high-performance all-solution-processed PeLEDs. [ABSTRACT FROM AUTHOR]

In this work, an instrument of drop-on-demand electrohydrodynamic jet (DoD E-Jet) printing device equipped with a current measurement and control system was designed and developed for finely controlling the printing process. The relationships between the current and printing parameters of voltage, frequency, and flow rate were deeply investigated, and the examination data and conclusion were obtained under the condition of the needle size remaining unchanged. Especially, the equation relationship between the flow rate and current was established, which can be used for the modification of the DoD E-Jet printing process. The map describing the stable printing range, droplet size, and current was also recognized, which can help us to select parameters for stable printing. Based on the current measurement and control system and the established relationship, the optimized current and printing parameters were chosen to print uniform graphene microstructures. This instrument provides an effective method for monitoring, adjusting, and controlling the DoD E-Jet printing process and further improving the quality of the printed structures for micro/nanoelectromechanical system (M/NEMS) devices. [ABSTRACT FROM AUTHOR]

[Display omitted] • TBI causes oxidative stress and neuroinflammation in brain tissue, which in turn causes ferroptosis. • DFO can reduce oxidative stress and iron death levels after TBI. • GSNO reduces TBI-induced neurodegeneration and aids in functional recovery. • DFO can reduce NF-kb pathway expression after TBI, which in turn reduces pyroptosis and attenuates neuroinflammation. Traumatic brain injury (TBI) is an important reason of neurological damage and has high morbidity and mortality rates. The secondary damage caused by TBI leads to a poor clinical prognosis. According to the literature, TBI leads to ferrous iron aggregation at the site of trauma and may be a key factor in secondary injury. Deferoxamine (DFO), which is an iron chelator, has been shown to inhibit neuron degeneration; however, the role of DFO in TBI is unclear. The purpose of this study was to explore whether DFO can ameliorate TBI by inhibiting ferroptosis and neuroinflammation. Here, our findings suggest that DFO can reduce the accumulation of iron, lipid peroxides, and reactive oxygen species (ROS) and modulate the expression of ferroptosis-related indicators. Moreover, DFO may reduce NLRP3 activation via the ROS/NF-κB pathway, modulate microglial polarization, reduce neutrophil and macrophage infiltration, and inhibit the release of inflammatory factors after TBI. Additionally, DFO may reduce the activation of neurotoxic responsive astrocytes. Finally, we demonstrated that DFO can protect motor memory function, reduce edema and improve peripheral blood perfusion at the site of trauma in mice with TBI, as shown by behavioral experiments such as the Morris water maze test, cortical blood perfusion assessment and animal MRI. In conclusion, DFO ameliorates TBI by reducing iron accumulation to alleviate ferroptosis and neuroinflammation, and these findings provide a new therapeutic perspective for TBI. [ABSTRACT FROM AUTHOR]

In two experiments conducted over a 2-year period, oat straw was ensiled with different levels of perennial ryegrass and wet hulless-barley distillers' grains ( WHDG) to improve utilization efficiency of oat straw as ruminants feed. Firstly, oat straw was ensiled with varying proportions of perennial ryegrass (0, 20, 40 or 60% of fresh weight [FW]). The lactic acid ( LA) and lactic/acetic acid ( LA/ AA) were increased (L, Q, P < 0.01) whereas pH value, propionic acid, butyric acid and volatile fatty acids were decreased (L, Q, P < 0.01) with increasing perennial ryegrass levels. From the perspective of maximum use oat straw, it was suggested that 40% perennial ryegrass inclusions was proper for further study. Then, mixtures of oat straw and perennial ryegrass (60/40) were ensiled with WHDG at 0, 100, 200 or 300 g kg-1 FW (defined as WHDG0, WHDG100, WHDG200 and WHDG300, respectively), the fermentation characteristics and in vitro rumen degradability were analyzed. The dry matter ( DM) and pH value declined (L, Q, P < 0.01), while the LA increased (L, Q, P < 0.01) with the increase of WHDG ratios. The inclusion of WHDG significantly decreased ammonia nitrogen concentrations (L, Q, P < 0.01). The crude protein content linearly increased ( P < 0.01), whereas the acid detergent fiber ( ADF) content linearly decreased ( P < 0.01) with increasing levels of WHDG. The WHDG inclusion significantly increased in vitro neutral detergent fiber degradability (L, Q, P < 0.01) with the highest value in WHDG200. The in vitro DM and ADF degradability had a Q effect ( P < 0.01) in response to increasing WHDG levels. Overall inclusion of WHDG can improve the fermentation and in vitro degradability of mixed silages of oat straw and perennial ryegrass. [ABSTRACT FROM AUTHOR]

Aspergillus fumigatus is a saprophytic mold and an opportunistic pathogen with a broad geographic and ecological distribution. A. fumigatus is the most common etiological agent of aspergillosis, affecting over 8,000,000 individuals worldwide. Due to the rising number of infections and increasing reports of resistance to antifungal therapy, there is an urgent need to understand A. fumigatus populations from local to global levels. However, many geographic locations and ecological niches remain understudied, including soil environments from arctic regions. In this study, we isolated 32 and 52 A. fumigatus strains from soils in Iceland and the Northwest Territories of Canada (NWT), respectively. These isolates were genotyped at nine microsatellite loci and the genotypes were compared with each other and with those in other parts of the world. Though significantly differentiated from each other, our analyses revealed that A. fumigatus populations from Iceland and NWT contained evidence for both clonal and sexual reproductions, and shared many alleles with each other and with those collected from across Europe, Asia, and the Americas. Interestingly, we found one triazole-resistant strain containing the TR34 /L98H mutation in the cyp51A gene from NWT. This strain is closely related to a triazole-resistant genotype broadly distributed in India. Together, our results suggest that the northern soil populations of A. fumigatus are significantly influenced by those from other geographic regions. [ABSTRACT FROM AUTHOR]

In recent years, more and more reports have shown that the miR156-SPL module can participate in the regulation of anthocyanin synthesis in plants. However, little is known about how this module responds to hormonal signals manipulating this process in grapes. In this study, exogenous GA, ABA, MeJA, and NAA were used to treat the 'Wink' grape berries before color conversion, anthocyanin and other related quality physiological indexes (such as sugar, aroma) were determined, and spatio-temporal expression patterns of related genes were analyzed. The results showed that the expression levels of VvmiR156b/c/d showed a gradually rising trend with the ripening and color formation of grape berries, and the highest expression levels were detected at day 28 after treatment, while the expression level of VvSPL9 exhibited an opposite trend as a whole, which further verifies that VvmiR156b/c/d can negatively regulate VvSPL9. Besides, VvmiR156b/c/d was positively correlated with anthocyanin content and related genes levels, while the expression pattern of VvSPL9 showed a negative correlation. Analysis of promoter cis-elements and GUS staining showed that VvmiR156b/c/d contained a large number of hormone response cis-elements (ABA, GA, SA, MeJA, and NAA) and were involved in hormone regulation. Exogenous ABA and MeJA treatments significantly upregulated the expression levels of VvmiR156b/c/d and anthocyanin structural genes in the early stage of color conversion and made grape berries quickly colored. Interestingly, GA treatment downregulated the expression levels of VvmiR156b/c/d and anthocyanin structural genes in the early color-change period, but significantly upregulated in the middle color-change and ripening stages, therefore GA mainly modulated grape berry coloring in the middle- and late-ripening stages. Furthermore, NAA treatment downregulated the expression levels of VvmiR156b/c/d and anthocyanin structural genes and delayed the peak expression of genes. Meanwhile, to further recognize the potential functions of VvmiR156b/c/d, the mature tomato transient trangenetic system was utilized in this work. Results showed that transient overexpression of VvmiR156b/c/d in tomato promoted fruit coloring and overexpression of VvSPL9 inhibited fruit coloration. Finally, a regulatory network of the VvmiR156b/c/d-VvSPL9 module responsive to hormones modulating anthocyanin synthesis was developed. In conclusion, VvmiR156b/c/d-mediated VvSPL9 participated in the formation of grape color in response to multi-hormone signals. [ABSTRACT FROM AUTHOR]

Cyanogen (C 2 N 2) is a new and effective alternative soil fumigant to methyl bromide. The effects of soil properties on the fate of C 2 N 2 and its degradation products, including hydrogen cyanide (HCN), are not fully understood. The objectives of this study were to determine the adsorption kinetics, adsorption isotherms, and degradation kinetics of C 2 N 2 and HCN in texturally different soils and evaluate their leaching potentials using soil columns. Eight agricultural soils were collected throughout China: Luvisols (Hebei Province), Phaeozems (Heilongjiang Province), Gleysols (Sichuan Province), Anthrosols (Zhejiang Province), Ferralsols (Jiangxi Province), Lixisols (Hubei Province), Alisols (Shandong Province), and Plinthosols (Hainan Province). The adsorptions of C 2 N 2 and HCN in C 2 N 2 -fumigated soils were positively correlated with organic matter and clay contents. For a C 2 N 2 dose of 100 mg kg−1, the adsorptions of C 2 N 2 and HCN were highest in Phaeozems and lowest in Gleysols according to their adsorption coefficients (15.744 and 3.119, respectively). No significant difference in the half-life of C 2 N 2 and HCN was observed between sterilized and unsterilized soils, indicating that abiotic degradation was predominant in the degradation of C 2 N 2 and HCN. After leaching, the residual C 2 N 2 , HCN, NH 4 +–N, and NO 3 −–N concentrations in C 2 N 2 -fumigated Phaeozems were highest within 15 cm of the soil surface (30, 20, 19.68, and 10.41 mg kg−1 soil, respectively). The results indicate that C 2 N 2 and HCN have short lifetimes and low leaching potentials in agricultural soils, even under heavy rainfall conditions. The findings demonstrate that C 2 N 2 and HCN resulting from fumigation will not accumulate in the soil and are not likely to contaminate groundwater. • Adsorption, degradation, and leaching of C₂N₂ and HCN in eight soils were tested. • C₂N₂ and HCN adsorptions were correlated with organic matter and clay contents. • For a C₂N₂ dose of 100 mg kg⁻1, C₂N₂ and HCN adsorptions were highest in Phaeozems. • Abiotic degradation was predominant in the degradation of C 2 N 2 and HCN. • C 2 N 2 /HCN will not accumulate in soil and are not likely to contaminate groundwater. [ABSTRACT FROM AUTHOR]

The development of efficient red bandgap emission carbon quantum dots (CQDs) for realizing high‐performance electroluminescent warm white light‐emitting diodes (warm‐WLEDs) represents a grand challenge. Here, the synthesis of three red‐emissive electron‐donating group passivated CQDs (R‐EGP‐CQDs): R‐EGP‐CQDs‐NMe2, ‐NEt2, and ‐NPr2 is reported. The R‐EGP‐CQDs, well soluble in common organic solvents, display bright red bandgap emission at 637, 642, and 645 nm, respectively, reaching the highest photoluminescence quantum yield (QY) up to 86.0% in ethanol. Theoretical investigations reveal that the red bandgap emission originates from the rigid π‐conjugated skeleton structure, and the ‐NMe2, ‐NEt2, and ‐NPr2 passivation plays a key role in inducing charge transfer excited state in the π‐conjugated structure to afford the high QY. Solution‐processed electroluminescent warm‐WLEDs based on the R‐EGP‐CQDs‐NMe2, ‐NEt2, and ‐NPr2 display voltage‐stable warm white spectra with a maximum luminance of 5248–5909 cd m−2 and a current efficiency of 3.65–3.85 cd A−1. The warm‐WLEDs also show good long‐term operational stability (L/L0 > 80% after 50 h operation, L0: 1000 cd m−2). The electron‐donating group passivation strategy opens a new avenue to realizing efficient red bandgap emission CQDs and developing high‐performance electroluminescent warm‐WLEDs. [ABSTRACT FROM AUTHOR]

Traumatic brain injury (TBI) can negatively impact systemic organs, which can lead to more death and disability. However, the mechanism underlying the effect of TBI on systemic organs remains unclear. In previous work, we found that brain-derived extracellular vesicles (BDEVs) released from the injured brain can induce systemic coagulation with a widespread fibrin deposition in the microvasculature of the lungs, kidney, and heart in a mouse model of TBI. In this study, we investigated whether BDEVs can induce heart, lung, liver, and kidney injury in TBI mice. The results of pathological staining and related biomarkers indicated that BDEVs can induce histological damage and systematic dysfunction. In vivo imaging system demonstrated that BDEVs can gather in systemic organs. We also found that BDEVs could induce cell apoptosis in the lung, liver, heart, and kidney. Furthermore, we discovered that BDEVs could cause multi-organ endothelial cell damage. Finally, this secondary multi-organ damage could be relieved by removing circulating BDEVs. Our research provides a novel perspective and potential mechanism of TBI-associated multi-organ damage. • BDEVs can mediate multi-organ damage after injury. • BDEVs can induce endothelial cell injury in vivo and in vitro. • Removing circulating BDEVs can alleviate multi-organ damage after injury. [ABSTRACT FROM AUTHOR]