Search

Lead-based reactor nuclear power has the advantages of inherent safety, compact size, light weight, long service life, and high efficiency, and it is widely applied to advanced marine equipment, unmanned underwater vehicles, and deep-sea space stations for energy and power purposes. Conducting research on lead-based reactor marine nuclear power is key to the technological innovation of energy and power for marine equipment in China. This study clarifies the application scenarios and development demands of marine nuclear power, summarizes the development status of lead-based reactor nuclear power from the aspects of technical characteristics, representative applications, and research status, and analyzes corresponding key technologies including nuclear fuel and cladding materials, key components in the primary loop, coolant processes and oxygen control, and advanced power generation technologies. Moreover, the study explores the development challenges for lead-based reactor marine nuclear power and proposes there feasible technical routes: low-temperature lead-based reactor marine nuclear power, high-temperature and high-efficiency lead-based reactor marine nuclear power, and integrated natural-circulation lead-based reactor marine nuclear power. Furthermore, we propose the following suggestions to promote the leapfrog development of marine nuclear power in China:(1) strengthening research and development (R&D) of specialized technologies for the lead-based reactor marine nuclear power and accelerating the deployment of demonstrative projects; (2) incorporating lead-based reactors into the country's major energy strategies and creating a standards system; (3) establishing national joint R&D centers and creating new models for technological innovation and industrial development.

A 100-W radioisotope thermoelectric generator (RTG) is by far the most suitable power supply for long-term deep space exploration where solar power would not be feasible. Understanding the thermal performance and electrical performance of the RTG under operational conditions is paramount for its nominal and safety performance during the space mission. In this paper, modeling and experimental studies on the thermal behavior and electrical performance of the 100-W RTG have been conducted. The RTG uses high conversion efficiency skutterudite-based thermoelectric convertor (TEC) arrays thermally coupled with a radioisotope heat unit (RHU) to generate electricity. A comprehensive finite element model and an electrical heating prototype of the 100-W RTG have been built to assess the performance of the RTG designs. Critical temperature, generated power, and energy conversion efficiency were evaluated. The simulation results show that the maximum output power of the RTG can reach about 120 W(electric); the temperature of the hot end of the TECs is about 853 K, and the temperature of the cold end is about 473 K, making a temperature difference of about 380 K. The RTG prototype with Bi2Te3 TECs generated about 60 W(electric) of electrical power in the first experimental research stage. These research results have significant reference for extension of the RTG prototype to the actual power source of the RHU and allow for future research and development improvements of the 100-W RTG. [ABSTRACT FROM AUTHOR]

Toxoplasma gondii (T. gondii) is an obligate intracellular protozoan that can elicit a robust immune response during infection. Macrophage cells have been shown to play an important role in the immune response against T. gondii. In our previous study, the eukaryotic translation initiation factor 5A (eIF-5A) gene of T. gondii was found to influence the invasion and replication of tachyzoites. In this study, the recombinant protein of T. gondii eIF-5A (rTgeIF-5A) was incubated with murine macrophages, and the regulatory effect of TgeIF-5A on macrophages was characterized. Immunofluorescence assay showed that TgeIF-5A was able to bind to macrophages and partially be internalized. The Toll-like receptor 4 (TLR4) level and chemotaxis of macrophages stimulated with TgeIF-5A were reduced. However, the phagocytosis and apoptosis of macrophages were amplified by TgeIF-5A. Meanwhile, the cell viability experiment indicated that TgeIF-5A can promote the viability of macrophages, and in the secretion assays, TgeIF-5A can induce the secretion of interleukin-6 (IL-6), tumor necrosis factor-α (TNF-α) and nitric oxide (NO) from macrophages. These findings demonstrate that eIF-5A of T. gondii can modulate the immune response of murine macrophages in vitro, which may provide a reference for further research on developing T. gondii vaccines. [ABSTRACT FROM AUTHOR]

Background: Globally, oral diseases are common, pose an economic burden, and significantly decline the quality of life of affected individuals. Recently, researchers have substantially highlighted the effect of depression on oral disease incidence and development. In this study, we elucidated the correlation between depression and oral diseases. Methods: Using two-sample Mendelian randomization (MR), the association between depression and the risk of 17 oral diseases was evaluated. Three methods were used to perform MR analysis: the inverse variance-weighted, weighted median, and MR-Egger methods. Furthermore, Cochran's Q test, MR-Egger intercept test, MR Pleiotropy RESidual Sum and Outlier test, and leave-one-out analysis were performed to analyze sensitivity. Results: After implementing multiple test corrections, we observed that genetic susceptibility to depression was associated with an increased risk of mouth ulcers, toothache, loose teeth, bleeding gums, painful gums, chronic periodontitis, chronic tonsil and adenoid diseases, peritonsillar abscess, and excessive tooth attrition. However, a causal relationship between depression and other oral diseases was not observed. Sensitivity analysis confirmed the robustness of the results. Conclusions: We confirmed the causal relationship between depression and several oral diseases, thereby providing a novel viewpoint on the prevention and treatment of oral diseases. Our findings suggest the integration of depression control into routine clinical care to enhance the effectiveness of oral disease treatment. [ABSTRACT FROM AUTHOR]

Introduction: This overview of systematic reviews (SRs) systematically collected, evaluated, and combined the evidence for migraine treatment with transcranial magnetic stimulation (TMS).Methods: We conducted a systematic literature search in various databases, such as PubMed, The Cochrane Library, Web of Science, Embase, the China National Knowledge Infrastructure, Wanfang, VIP, and China Biomedical Literature. Two reviewers independently assessed the methodological quality, risk of bias, reporting quality, and strength of evidence of the included studies using AMSTAR-2, ROBIS, the PRISMA checklist, and the GRADE system.Results: We performed an overview of 7 relevant SRs, of which 4 were of moderate quality and 3 were of low quality according to AMSTAR 2. All SRs had low risk of bias in Phase 1 (Assessing relevance), Domain 1 (Study eligibility criteria), and Domain 4 (Synthesis and findings) as evaluated by ROBIS. In Domain 2 (Identification and selection of studies), 4 SRs (57.1%) had low risk of bias, while in Domain 3 (data collection and study appraisal) and Risk of Bias in the Review Phase 3, 4 SRs (57.1%) had low risk of bias. The PRISMA reporting standards were generally comprehensive, but some limitations were observed in the assessments, pooled results, evidence reliability, registration and protocols, and funding sources. The GRADE levels ranged from moderate to low, with 10 outcomes of moderate quality and 6 outcomes of low quality. The main reason for the low quality of evidence was the small sample size and high heterogeneity of the available studies.Conclusion: TMS may improve migraine severity and frequency, but the evidence is limited due to methodological flaws and heterogeneity. Future studies should standardize use, assess side effects, and compare with other treatments. [ABSTRACT FROM AUTHOR]

Soil total nitrogen (STN) is a crucial component of the ecosystem's nitrogen pool, and accurate prediction of STN content is essential for understanding global nitrogen cycling processes. This study utilized the measured STN content of 126 sample points and 40 extracted remote sensing variables to predict the STN content and map its spatial distribution in the northeastern coastal region of Hebei Province, China, employing the random forest (RF), gradient boosting machine (GBM), and extreme gradient boosting (XGBoost) methods. The purpose was to compare the ability of remote sensing images (Landsat-8, Sentinel-1, and Sentinel-2) with different machine learning methods for predicting STN content. The research results show the following: (1) The three machine learning methods accurately predicted the STN content and the optimal model provided by the XGBoost method, with an R2 of 0.627, RMSE of 0.127 g·kg−1, and MAE of 0.092 g·kg−1. (2) The combination of optical and synthetic aperture radar (SAR) images improved prediction accuracy, with the R2 improving by 45.5%. (3) The importance of optical images is higher than that of SAR images in the RF, GBM, and XGBoost methods, with optical images accounting for 87%, 76%, and 77% importance, respectively. (4) The spatial distribution of STN content predicted by the three methods is similar. Higher STN contents are distributed in the northern part of the study area, while lower STN contents are distributed in coastal areas. The results of this study can be very useful for inventories of soil nitrogen and provide data support and method references for revealing nitrogen cycling. [ABSTRACT FROM AUTHOR]

A protective oxide film is the key to the corrosion resistance of the FeCrAl alloy. The mechanism of the formation of the multilayer oxide film of the FeCrAl alloy in 700 °C air was explored by studying the structure evolution of the oxide film and the oxidation kinetics of FeCrAl. The results show that a multilayer oxide layer is formed on the surface of the FeCrAl alloy after 1344 h, with a (Fe,Cr)2O3 layer, an Al-rich oxide layer, an Al-depleted zone, and a new Al-rich oxide layer sequentially arranged from the surface to the matrix. This indicates that the Al element plays an important role in the formation of the oxide film. The Al in the matrix is depleted to form the Al-rich oxide layer, resulting in the Al-depleted zone. The new Al-rich oxide layer is formed under the Al-depleted zone by internal oxidation. It should be noted that the precipitation of the AlN phase in the matrix is observed, which might be a probable factor for the Al-depleted zone in the matrix. [ABSTRACT FROM AUTHOR]