Search

Personalized travel itinerary recommendation algorithms are the focus of research in smart tourism and tourism GIS. Aiming to address issues present in travel itinerary recommendations for the increasingly popular "self-drive tour" mode, this study proposes an algorithm based on comprehensive tourist satisfaction to mitigate problems such as the neglect of important relevant factors and low degree of personalization. First, we construct a model of tourist satisfaction for travel itineraries by comprehensively considering factors including time utilization, the attractiveness of attractions, itinerary feasibility, and the diversity of attraction types. Unlike previous studies, we consider dining and accommodation time during the itinerary, the physical condition of tourists, and the diversity of attraction types, and establish penalty functions to flexibly constrain deviations from the expected conditions in itinerary planning. Then, with the optimization of comprehensive tourist satisfaction as the objective, we design a new algorithm to address the itinerary recommendation problem, supporting tourists in selecting must-visit attractions, restaurants, and hotels, as well as personalized preferences such as the sightseeing sequence. The experimental results demonstrate that our proposed algorithm outperforms two baseline algorithms, providing higher comprehensive tourist satisfaction while also exhibiting greater feasibility in itinerary planning. The proposed algorithm effectively addresses the issue of personalized travel itinerary recommendation, presenting an efficient, feasible, and practical solution. [ABSTRACT FROM AUTHOR]

With the growing interest in providing internet access and cellular connectivity in the commercial aircraft, the compatibility between Air-to-Air (A2A) communications and current Air-to-Ground (A2G) macro-cellular communications is necessary to form an Aeronautical Ad hoc Network (AANet). Due to the typical features of airborne communications, such as high mobility, long transmission range and three-dimensional macro-cells, AANet is affected by intermittent links, which results in variant delayed data transmissions. To this end, we exploit a dynamic graph approach to model such an AANet with rapidly changing topology under a realistic airborne scenario. Targeting the problem of intermittent transmissions, by employing A2A, an AANet can bear three transmission modes: direct transmission, connected relay transmission and opportunistic transmission. To investigate the potential gain of A2A transmissions in terms of the end-to-end data flow transmission delay and the data traffic amount, we formulate an integer non-linear programming problem that minimizes the average end-to-end delay from Internet Gateways (IGWs) on shore to the aircraft receivers through multiple options of the transmission modes. Through solving this minimization problem based on the realistic dynamic graph model, the tradeoffs between the end-to-end transmission delay and other key network factors related to AANet formation and resource allocation can be obtained without much compromise on the transmission delay. The results show that the average end-to-end delay of the AANet is comparable to the direct transmission delay when having a tradeoff with the data traffic amount, buffer size and the spectrum sharing. [ABSTRACT FROM AUTHOR]

This paper investigates the effects of foreign official purchases of U.S. treasuries on mortgage rates from January 1985 to June 2007 using a proxy structural vector autoregression (SVAR) model, where shocks to foreign official inflows to treasuries are identified by their correlation with foreign exchange interventions. Although mortgage rates significantly decrease in response to positive shocks to foreign official purchases of U.S. treasuries, these shocks only explain a small fraction of the variation in the U.S. mortgage rate. [ABSTRACT FROM AUTHOR]

Highlights • A new Ti-based BMGC with the composition of Ti 57.3 Zr 19.6 Cu 4.7 Ni 2.8 Be 12 Nb 3.6 was developed. • The composite shows large homogeneous ductility and significant work-hardening capacity. • The toughening mechanism is a combined effect of stress-induced martensitic transformation and mechanical twinning. Abstract A new Ti-based BMGC with excellent tensile plasticity and significant work-hardening capacity was successfully developed. The microstructure, mechanical behaviors and toughening mechanisms were investigated in details by SEM, XRD, TEM and Nano-indentation. It is found that the stress-induced martensitic transformation from β to α″ phase and the mechanical twinning in the α″ phase combined to account for these mechanical behaviors. The current work offers a new perspective for developing in situ dendrite reinforced BMGCs with improved homogeneous ductility and significant work-hardening capacity. [ABSTRACT FROM AUTHOR]

Highlights • Switchable ETFE cushions has been employed in building envelope for daylight and solar heat control. • Ray-tracing techniques were used to investigate the effects of various design aspects of the ETFE. • A parametric study was carried out investigating the optical performance of switchable ETFE. • The impact of switchable ETFE cushions on building performance were studied. Abstract A pneumatic multilayer foil construction with a kinetic shading mechanism has the potential to be an effective response to dynamic climatic factors, such as solar radiation, and therefore moderate the energy consumption of buildings. A parametric study was carried out on a switchable ethylene-tetrafluoroethylene (ETFE) foil cushion with the purpose of investigating the optical performance of an adaptive building envelope and its impact on building energy performance regarding heating, cooling and lighting. Ray-tracing techniques were used to investigate the effects of surface curvature, frit layout and frit properties, on the optical performance of the cushion in open and closed mode. A range of incidence angles for solar radiation were simulated. The results of the simulation showed an angle dependent optical behaviour for both modes. The influence of the dynamic shading mechanism on building energy performance was further evaluated by integrating the optical data obtained for the ETFE foil cushions in a comprehensive energy simulation of a generic atrium building using EnergyPlus. Results suggested that switchable ETFE foil cushions have a higher potential to reduce cooling and heating loads in different climatic regions, compared to conventional glazing solutions (i.e. uncoated double-glazing and reflective double-glazing), while providing good conditions of natural daylighting. Annual energy savings of up to 44.9% were predicted for the switchable ETFE foil cushion in comparison to reflective double glazing. As such, this study provides additional insight into the optical behaviour of multilayer foil constructions and the factors of design and environment that potentially have a major impact on buildings energy performance. [ABSTRACT FROM AUTHOR]

This article uses a structural VAR model to investigate the sources of real exchange rate fluctuations in China over the period 1995Q1–2015Q4, taking into account five different types of macroeconomic shocks including technology, government spending, monetary policy, foreign demand, and risk premium shocks. These shocks are identified using sign restrictions derived from predictions of an open economy general equilibrium model calibrated to China’s economy. We find that foreign demand shocks are the most important driving force of China’s real exchange rate, which explains approximately 20% to 40% of the variance in 20 quarters. It is in line with the findings in the literature which show real demand shocks are the key contributor to fluctuations in the real exchange rate. Nominal shocks such as monetary policy shocks and risk premium shocks play relatively important roles at the short-term horizons, but their effects decay rapidly. [ABSTRACT FROM PUBLISHER]

The Acknowledgement statement of the original article was published with missing sponsors information. The updated statement is shown below: [ABSTRACT FROM AUTHOR]