Search

As the electronic and electrical architecture (E/EA) of intelligent and connected vehicles (ICVs) evolves, traditional distributed and signal-oriented architectures are being replaced by centralized, service-oriented architectures (SOA). This new generation of E/EA demands in-vehicle networks (IVNs) that offer high bandwidth, real-time, reliability, and service-oriented. data distribution service (DDS) and time-sensitive networking (TSN) are increasingly adopted to address these requirements. However, research on the integrated deployment of DDS and TSN in automotive applications is still in its infancy. This paper presents a DDS over TSN (DoT) communication architecture based on the centralized discovery architecture (CDA). First, a lightweight DDS implementation (FastDDS-lw) is developed for resource-constrained in-vehicle devices. Next, a DDS flow identification algorithm (DFIA) based on the CDA is introduced to identify potential DDS flows during the discovery phase automatically. Finally, the DoT communication architecture is designed, incorporating FastDDS-lw and DFIA. Experimental results show that the DoT architecture significantly reduces end-to-end latency and jitter for critical DDS flows compared to traditional Ethernet. Additionally, DoT provides an automated network configuration method that completes within a few tens of milliseconds.

Time-Sensitive Networking (TSN) is a set of standards that provide low-latency, high-reliability guarantees for the transmission of traffic in networks, and it is becoming an accepted solution for complex time-critical systems such as those in industrial automation and the automotive. In time-critical systems, it is essential to verify the timing predictability of the system, and the application of scheduling mechanisms in TSN can also bring about changes in system timing. Therefore, schedulability analysis techniques can be used to verify that the system is scheduled according to the scheduling mechanism and meets the timing requirements. In this paper, we provide a clear overview of the state-of-the-art works on the topic of schedulability analysis in TSN in an attempt to clarify the purpose of schedulability analysis, categorize the methods of schedulability analysis and compare their respective strengths and weaknesses, point out the scheduling mechanisms under analyzing and the corresponding traffic classes, clarify the network scenarios constructed during the evaluation and list the challenges and directions still needing to be worked on in schedulability analysis in TSN. To this end, we conducted a systematic literature review and finally identified 123 relevant research papers published in major conferences and journals in the past 15 years. Based on a comprehensive review of the relevant literature, we have identified several key findings and emphasized the future challenges in schedulability analysis for TSN.

Learning policies from offline datasets through offline reinforcement learning (RL) holds promise for scaling data-driven decision-making and avoiding unsafe and costly online interactions. However, real-world data collected from sensors or humans often contains noise and errors, posing a significant challenge for existing offline RL methods. Our study indicates that traditional offline RL methods based on temporal difference learning tend to underperform Decision Transformer (DT) under data corruption, especially when the amount of data is limited. This suggests the potential of sequential modeling for tackling data corruption in offline RL. To further unleash the potential of sequence modeling methods, we propose Robust Decision Transformer (RDT) by incorporating several robust techniques. Specifically, we introduce Gaussian weighted learning and iterative data correction to reduce the effect of corrupted data. Additionally, we leverage embedding dropout to enhance the model's resistance to erroneous inputs. Extensive experiments on MoJoCo, KitChen, and Adroit tasks demonstrate RDT's superior performance under diverse data corruption compared to previous methods. Moreover, RDT exhibits remarkable robustness in a challenging setting that combines training-time data corruption with testing-time observation perturbations. These results highlight the potential of robust sequence modeling for learning from noisy or corrupted offline datasets, thereby promoting the reliable application of offline RL in real-world tasks.

In the field of portrait video generation, the use of single images to generate portrait videos has become increasingly prevalent. A common approach involves leveraging generative models to enhance adapters for controlled generation. However, control signals (e.g., text, audio, reference image, pose, depth map, etc.) can vary in strength. Among these, weaker conditions often struggle to be effective due to interference from stronger conditions, posing a challenge in balancing these conditions. In our work on portrait video generation, we identified audio signals as particularly weak, often overshadowed by stronger signals such as facial pose and reference image. However, direct training with weak signals often leads to difficulties in convergence. To address this, we propose V-Express, a simple method that balances different control signals through the progressive training and the conditional dropout operation. Our method gradually enables effective control by weak conditions, thereby achieving generation capabilities that simultaneously take into account the facial pose, reference image, and audio. The experimental results demonstrate that our method can effectively generate portrait videos controlled by audio. Furthermore, a potential solution is provided for the simultaneous and effective use of conditions of varying strengths.

Previous work has demonstrated that, in the Variance Preserving (VP) scenario, the nascent Directly Denoising Diffusion Models (DDDM) can generate high-quality images in one step while achieving even better performance in multistep sampling. However, the Pseudo-LPIPS loss used in DDDM leads to concerns about the bias in assessment. Here, we propose a unified DDDM (uDDDM) framework that generates images in one-step/multiple steps for both Variance Preserving (VP) and Variance Exploding (VE) cases. We provide theoretical proofs of the existence and uniqueness of the model's solution paths, as well as the non-intersecting property of the sampling paths. Additionally, we propose an adaptive Pseudo-Huber loss function to balance the convergence to the true solution and the stability of convergence process.Through a comprehensive evaluation, we demonstrate that uDDDMs achieve FID scores comparable to the best-performing methods available for CIFAR-10 in both VP and VE. Specifically, uDDDM achieves one-step generation on CIFAR10 with FID of 2.63 and 2.53 for VE and VP respectively. By extending the sampling to 1000 steps, we further reduce FID score to 1.71 and 1.65 for VE and VP respectively, setting state-of-the-art performance in both cases.

In this paper, we present the Directly Denoising Diffusion Model (DDDM): a simple and generic approach for generating realistic images with few-step sampling, while multistep sampling is still preserved for better performance. DDDMs require no delicately designed samplers nor distillation on pre-trained distillation models. DDDMs train the diffusion model conditioned on an estimated target that was generated from previous training iterations of its own. To generate images, samples generated from the previous time step are also taken into consideration, guiding the generation process iteratively. We further propose Pseudo-LPIPS, a novel metric loss that is more robust to various values of hyperparameter. Despite its simplicity, the proposed approach can achieve strong performance in benchmark datasets. Our model achieves FID scores of 2.57 and 2.33 on CIFAR-10 in one-step and two-step sampling respectively, surpassing those obtained from GANs and distillation-based models. By extending the sampling to 1000 steps, we further reduce FID score to 1.79, aligning with state-of-the-art methods in the literature. For ImageNet 64x64, our approach stands as a competitive contender against leading models.

Off-road autonomy validation presents unique challenges due to the unpredictable and dynamic nature of off-road environments. Traditional methods focusing on sequentially sweeping across the parameter space for variability analysis struggle to comprehensively assess the performance and safety of off-road autonomous systems within the imposed time constraints. This paper proposes leveraging scalable digital twin simulations within high-performance computing (HPC) clusters to address this challenge. By harnessing the computational power of HPC clusters, our approach aims to provide a scalable and efficient means to validate off-road autonomy algorithms, enabling rapid iteration and testing of autonomy algorithms under various conditions. We demonstrate the effectiveness of our framework through performance evaluations of the HPC cluster in terms of simulation parallelization and present the systematic variability analysis of a candidate off-road autonomy algorithm to identify potential vulnerabilities in the autonomy stack's perception, planning and control modules., Comment: Accepted at Ground Vehicle Systems Engineering and Technology Symposium (GVSETS) 2024. Distribution Statement A. Approved for public release; distribution is unlimited. OPSEC #8451. arXiv admin note: text overlap with arXiv:2402.12670, arXiv:2402.14739

In this paper, we introduce a novel unsupervised network to denoise microscopy videos featured by image sequences captured by a fixed location microscopy camera. Specifically, we propose a DeepTemporal Interpolation method, leveraging a temporal signal filter integrated into the bottom CNN layers, to restore microscopy videos corrupted by unknown noise types. Our unsupervised denoising architecture is distinguished by its ability to adapt to multiple noise conditions without the need for pre-existing noise distribution knowledge, addressing a significant challenge in real-world medical applications. Furthermore, we evaluate our denoising framework using both real microscopy recordings and simulated data, validating our outperforming video denoising performance across a broad spectrum of noise scenarios. Extensive experiments demonstrate that our unsupervised model consistently outperforms state-of-the-art supervised and unsupervised video denoising techniques, proving especially effective for microscopy videos., Comment: Accepted at CVPRW 2024

Current soft prompt methods yield limited performance when applied to small-sized models (fewer than a billion parameters). Deep prompt-tuning, which entails prepending parameters in each layer for enhanced efficacy, presents a solution for prompting small-sized models, albeit requiring carefully designed implementation. In this paper, we introduce the Lottery Ticket Prompt-learning (LTP) framework that integrates winning tickets with soft prompts. The LTP offers a simpler implementation and requires only a one-time execution. We demonstrate LTP on cross-lingual tasks, where prior works rely on external tools like human-designed multilingual templates and bilingual dictionaries, which may not be feasible in a low-resource regime. Specifically, we select a subset of parameters that have been changed the most during the fine-tuning with the Masked Language Modeling objective. Then, we prepend soft prompts to the original pre-trained language model and only update the selected parameters together with prompt-related parameters when adapting to the downstream tasks. We verify the effectiveness of our LTP framework on cross-lingual tasks, specifically targeting low-resource languages. Our approach outperforms the baselines by only updating 20\% of the original parameters.

We consider the problem of multi-objective alignment of foundation models with human preferences, which is a critical step towards helpful and harmless AI systems. However, it is generally costly and unstable to fine-tune large foundation models using reinforcement learning (RL), and the multi-dimensionality, heterogeneity, and conflicting nature of human preferences further complicate the alignment process. In this paper, we introduce Rewards-in-Context (RiC), which conditions the response of a foundation model on multiple rewards in its prompt context and applies supervised fine-tuning for alignment. The salient features of RiC are simplicity and adaptivity, as it only requires supervised fine-tuning of a single foundation model and supports dynamic adjustment for user preferences during inference time. Inspired by the analytical solution of an abstracted convex optimization problem, our dynamic inference-time adjustment method approaches the Pareto-optimal solution for multiple objectives. Empirical evidence demonstrates the efficacy of our method in aligning both Large Language Models (LLMs) and diffusion models to accommodate diverse rewards with only around 10% GPU hours compared with multi-objective RL baseline., Comment: Accepted by ICML 2024

In dark matter coannihilation scenarios, the Sommerfeld effect of coannihilators is usually important in calculations of dark matter thermal relic abundance. Due to decays of coannihilators, two annihilating coannihilators can only approach each other from a finite initial separation. While conventional derivations of Sommerfeld factors essentially assume an infinite initial separation, Sommerfeld factors for a pair of annihilating coannihilators may be different. As a proof of concept, we calculate the modification of the s-wave Sommerfeld factor for a Coulomb potential. We find that the Sommerfeld factor for a pair of coannihilators is less prominent than the one obtained without considering decays. The modification of the Sommerfeld factor may result in a change of the dark matter thermal relic abundance beyond the percent level., Comment: 18 pages, 3 figures

Deep neural networks have demonstrated remarkable performance in various tasks. With a growing need for sparse deep learning, model compression techniques, especially pruning, have gained significant attention. However, conventional pruning techniques can inadvertently exacerbate algorithmic bias, resulting in unequal predictions. To address this, we define a fair pruning task where a sparse model is derived subject to fairness requirements. In particular, we propose a framework to jointly optimize the pruning mask and weight update processes with fairness constraints. This framework is engineered to compress models that maintain performance while ensuring fairness in a single execution. To this end, we formulate the fair pruning problem as a novel constrained bi-level optimization task and derive efficient and effective solving strategies. We design experiments spanning various datasets and settings to validate our proposed method. Our empirical analysis contrasts our framework with several mainstream pruning strategies, emphasizing our method's superiority in maintaining model fairness, performance, and efficiency.

Large Language Models (LLMs), representing a significant achievement in artificial intelligence (AI) research, have demonstrated their ability in a multitude of tasks. This project aims to explore the capabilities of GPT-3.5, a leading example of LLMs, in processing the sentiment analysis of Internet memes. Memes, which include both verbal and visual aspects, act as a powerful yet complex tool for expressing ideas and sentiments, demanding an understanding of societal norms and cultural contexts. Notably, the detection and moderation of hateful memes pose a significant challenge due to their implicit offensive nature. This project investigates GPT's proficiency in such subjective tasks, revealing its strengths and potential limitations. The tasks include the classification of meme sentiment, determination of humor type, and detection of implicit hate in memes. The performance evaluation, using datasets from SemEval-2020 Task 8 and Facebook hateful memes, offers a comparative understanding of GPT responses against human annotations. Despite GPT's remarkable progress, our findings underscore the challenges faced by these models in handling subjective tasks, which are rooted in their inherent limitations including contextual understanding, interpretation of implicit meanings, and data biases. This research contributes to the broader discourse on the applicability of AI in handling complex, context-dependent tasks, and offers valuable insights for future advancements.

The recent use of diffusion prior, enhanced by pre-trained text-image models, has markedly elevated the performance of image super-resolution (SR). To alleviate the huge computational cost required by pixel-based diffusion SR, latent-based methods utilize a feature encoder to transform the image and then implement the SR image generation in a compact latent space. Nevertheless, there are two major issues that limit the performance of latent-based diffusion. First, the compression of latent space usually causes reconstruction distortion. Second, huge computational cost constrains the parameter scale of the diffusion model. To counteract these issues, we first propose a frequency compensation module that enhances the frequency components from latent space to pixel space. The reconstruction distortion (especially for high-frequency information) can be significantly decreased. Then, we propose to use Sample-Space Mixture of Experts (SS-MoE) to achieve more powerful latent-based SR, which steadily improves the capacity of the model without a significant increase in inference costs. These carefully crafted designs contribute to performance improvements in largely explored 4x blind super-resolution benchmarks and extend to large magnification factors, i.e., 8x image SR benchmarks. The code is available at https://github.com/amandaluof/moe_sr., Comment: 15 pages, 7 figures

The Jiangmen Underground Observatory (JUNO) is a 20-kton liquid scintillator detector that employs 20,000 20-inch photomultiplier tubes (PMTs) as photon sensors, with 5,000 dynode-PMTs from HAMAMATSU Photonics K.K. (HPK), and 15,000 MCP-PMTs from North Night Vision Technology (NNVT) installed in pure water. JUNO aims to provide long-lasting and the best performance operation by utilizing a high-transparency liquid scintillator, high detection efficiency PMTs, and specially designed electronics including water-proof potting for the high voltage (HV) dividers of PMTs. In this paper, we present a summary of the design and optimization of HV dividers for both types of 20-inch PMTs, which includes collection efficiency, charge resolution, HV divider current, pulse shape, and maximum amplitude restriction. We have developed and finalized four schemes of the HV divider for different scenarios, including the final version selected by JUNO. All 20,000 20-inch PMTs have successfully undergone production and burning tests., Comment: 14pages,28figures

Prior studies generally focus on software vulnerability detection and have demonstrated the effectiveness of Graph Neural Network (GNN)-based approaches for the task. Considering the various types of software vulnerabilities and the associated different degrees of severity, it is also beneficial to determine the type of each vulnerable code for developers. In this paper, we observe that the distribution of vulnerability type is long-tailed in practice, where a small portion of classes have massive samples (i.e., head classes) but the others contain only a few samples (i.e., tail classes). Directly adopting previous vulnerability detection approaches tends to result in poor detection performance, mainly due to two reasons. First, it is difficult to effectively learn the vulnerability representation due to the over-smoothing issue of GNNs. Second, vulnerability types in tails are hard to be predicted due to the extremely few associated samples.To alleviate these issues, we propose a Long-taIled software VulnerABiLity typE classification approach, called LIVABLE. LIVABLE mainly consists of two modules, including (1) vulnerability representation learning module, which improves the propagation steps in GNN to distinguish node representations by a differentiated propagation method. A sequence-to-sequence model is also involved to enhance the vulnerability representations. (2) adaptive re-weighting module, which adjusts the learning weights for different types according to the training epochs and numbers of associated samples by a novel training loss.

Clustering continues to be a significant and challenging task. Recent studies have demonstrated impressive results by applying clustering to feature representations acquired through self-supervised learning, particularly on small datasets. However, when dealing with datasets containing a large number of clusters, such as ImageNet, current methods struggle to achieve satisfactory clustering performance. In this paper, we introduce a novel method called Contrastive representation Disentanglement for Clustering (CDC) that leverages contrastive learning to directly disentangle the feature representation for clustering. In CDC, we decompose the representation into two distinct components: one component encodes categorical information under an equipartition constraint, and the other component captures instance-specific factors. To train our model, we propose a contrastive loss that effectively utilizes both components of the representation. We conduct a theoretical analysis of the proposed loss and highlight how it assigns different weights to negative samples during the process of disentangling the feature representation. Further analysis of the gradients reveals that larger weights emphasize a stronger focus on hard negative samples. As a result, the proposed loss exhibits strong expressiveness, enabling efficient disentanglement of categorical information. Through experimental evaluation on various benchmark datasets, our method demonstrates either state-of-the-art or highly competitive clustering performance. Notably, on the complete ImageNet dataset, we achieve an accuracy of 53.4%, surpassing existing methods by a substantial margin of +10.2%., Comment: 10 pages, 7 tables, 4 figures

Pre-trained multilingual language models play an important role in cross-lingual natural language understanding tasks. However, existing methods did not focus on learning the semantic structure of representation, and thus could not optimize their performance. In this paper, we propose Multi-level Multilingual Knowledge Distillation (MMKD), a novel method for improving multilingual language models. Specifically, we employ a teacher-student framework to adopt rich semantic representation knowledge in English BERT. We propose token-, word-, sentence-, and structure-level alignment objectives to encourage multiple levels of consistency between source-target pairs and correlation similarity between teacher and student models. We conduct experiments on cross-lingual evaluation benchmarks including XNLI, PAWS-X, and XQuAD. Experimental results show that MMKD outperforms other baseline models of similar size on XNLI and XQuAD and obtains comparable performance on PAWS-X. Especially, MMKD obtains significant performance gains on low-resource languages., Comment: accepted at EMNLP 2022

If the annihilation products of dark matter (DM) are non-relativistic and couples directly to a light force mediator, the non-perturbation effect like final state bound state (FBS) formation and final state Sommerfeld (FSS) effect must be considered. Non-relativistic region of final particles will appear when there is small mass split between DM and products, so we study those effects in the degenerate region of mass (including kinematics forbidden case) using two specific models. We demonstrate that FBS effect will significantly modify the DM relic abundance comparing to the standard perturbation calculation in some mass split region. We emphasize that FBS effect is comparable to the FSS effect in those mass split. The conservation angular momentum are subtle considering FBS formation, in some cases there may be not $s$-wave, so we use two models exhibit the different partial wave FBS effect contribution. We also show that the FBS formation with vector boson emission process also contributes in DM relic abundance, and first calculate the $p$-wave FSS effect in the specific model., Comment: Version to be published in Chinese Physics C. 23 pages, 13 figures