Search

Purpose: Postactivation performance enhancement (PAPE), which refers to the phenomena associated with the attainment of enhanced performance in sport-specific tasks after a conditioning activity, is an important objective of warming-up practices in many sports. This is even more relevant for sprinters, as potential increases in sprinting speed will directly influence their competitive results. This systematic review with meta-analysis evaluated the effects of different PAPE protocols (ie, using plyometrics, strength-power exercises, and resisted/assisted sprints) on the sprinting performance (ie, sprint time or sprint speed) of competitive sprinters. Methods: Initially, 1205 records published until last December 18 were identified, using the following databases: PubMed/MEDLINE, Scopus, and Clarivate Web of Science. After removing duplicates and screening titles and abstracts, 14 high-quality studies met the inclusion criteria for the meta-analysis. Results: Overall, there were no significant changes in sprint performance after implementing various types of conditioning activities (standardized mean difference [SMD] = 0.16 [95% CI, −0.02 to 0.33]; Z = 1.78; P =.08; I2 = 0%). In addition, when comparing prechanges and postchanges between experimental, control, and other conditions, no significant differences were found in sprint speed or time across all studies (SMD = 0.09 [95% CI, −0.10 to 0.28]; Z = 0.92; P =.36; I = 0%). Conclusions: Results revealed that different types of conditioning activities may not be capable of acutely enhancing the sprint speed of competitive sprinters. This aligns with previous observations indicating that sprinting is a highly stable physical capacity, a phenomenon that is even more consistent among elite sprinters. Coaches and sport scientists should collaborate to develop more efficient PAPE protocols for these highly specialized athletes, with special attention to study design and individualization, while considering their effects on acceleration versus top speed. [ABSTRACT FROM AUTHOR]

Despite previous support for plyometric training, optimal dosing strategies remain unclear. Purpose: To investigate vertical and horizontal jump kinetic performance following a low-volume plyometric stimulus with progressively increased session jump volume. Methods: Sixteen academy rugby players (20.0 [2.0] y; 103.0 [17.6] kg; 184.3 [5.5] cm) volunteered for this study. Vertical and horizontal jump sessions were conducted 1 week apart and consisted of a 40-jump low-volume plyometric stimulus using 4 exercises, after which volume was progressively increased to 200 jumps, using countermovement jump (CMJ) for vertical sessions and horizontal broad jump (HBJ) for horizontal sessions. Jump performance was assessed via force-plate analysis at baseline (PRE-0), following the low-volume plyometric stimulus (P-40), and every subsequent 10 jumps until the end of the session (P-50, P-60, P-70,... P-200). Results: The low-volume stimulus was effective in potentiating HBJ (2% to 5%) but not CMJ (0% to −7%) performance (P <.001). The HBJ performance enhancements were maintained throughout the entire high-volume session, while CMJ realized small but significant decrements (−5% to −7%) in jump height P-50 to P-80 before recovering to presession values. Moreover, increases in eccentric impulse (5% to 24%; P <.001) in both sessions were associated with decreased or maintained concentric impulse, indicating a breakdown in performance-augmenting mechanisms and less effective power transfer concentrically after moderate volumes. Conclusion: Practitioners should consider kinetic differences between HBJ and CMJ with increasing volume to better inform and understand session dosing strategies. [ABSTRACT FROM AUTHOR]

Purpose: The optimal power load is defined as the load that maximizes power output in a given exercise. This load can be determined through the use of various instruments, under different testing protocols. Specifically, the "optimum power load" (OPL) is derived from the load–velocity relationship, using only bar force and bar velocity in the power computation. The OPL is easily assessed using a simple incremental testing protocol, based on relative percentages of body mass. To date, several studies have examined the associations between the OPL and different sport-specific measures, as well as its acute and chronic effects on athletic performance. The aim of this brief review is to present and summarize the current evidence regarding the OPL, highlighting the main lines of research on this topic and discussing the potential applications of this novel approach for testing and training. Conclusions: The validity and simplicity of OPL-based schemes provide strong support for their use as an alternative to more traditional strength–power training strategies. The OPL method can be effectively used by coaches and sport scientists in different sports and populations, with different purposes and configurations. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to map responses over 32 hours following high-load (HL) and moderate-load (ML) half-squat priming. Methods: Fifteen participants completed control, HL (87% 1RM), and ML (65% 1RM) activities in randomized, counterbalanced order. Countermovement jump (CMJ), squat jump (SJ), saliva testosterone, saliva cortisol, and perceptual measures were assessed before and 5 minutes, 8 hours, 24 hours, and 32 hours after each activity. Results are presented as percentage change from baseline and 95% confidence interval (CI). Cliff delta was used to determine threshold for group changes. Results: SJ height increased by 4.5% (CI = 2.2–6.8, Cliff delta = 0.20) 8 hours following HL. CMJ and SJ improved by 6.1% (CI = 2.1–7.8, Cliff delta = 0.27) and 6.5% (CI = 1.2–11.8, Cliff delta = 0.30), respectively, 32 hours after ML. No clear diurnal changes in CMJ or SJ occurred 8 hours following control; however, increases of 3.9% (CI = 2.9–9.2, Cliff delta = 0.26) and 4.5% (CI = 0.9–8.1, Cliff delta = 0.24), respectively, were observed after 32 hours. Although diurnal changes in saliva hormone concentration occurred (Cliff delta = 0.37–0.92), the influence of priming was unclear. Perceived "physical feeling" was greater 8 hours following HL (Cliff delta = 0.36) and 32 hours after ML and control (Cliff delta = 0.17–0.34). Conclusions: HL priming in the morning may result in small improvements in jump output and psychophysiological state in the afternoon. Similar improvements were observed in the afternoon the day after ML priming. [ABSTRACT FROM AUTHOR]

Purpose: To test the relationships between maximum and relative strength (MS and RS), absolute and relative peak force (PF and RPF), and strength deficit (SDef), with sprint and jump performance, and to compare these mechanical variables between elite sprinters and professional rugby union players. Methods: Thirty-five male rugby union players and 30 male sprinters performed vertical jumps, 30-m sprint, and half-squat 1-repetition maximum (1RM), where these force-related parameters were collected. Pearson correlation coefficients were used to test the relationships between the variables. An independent t test and magnitude-based inferences compared the mechanical variables between sprinters and rugby players. Results: Almost certain significant differences were observed for jump and sprint performance between groups (P <.0001). The rugby union players demonstrated a likely significant higher MS (P =.03) but a very likely lower RS (P =.007) than the sprinters. No significant differences were observed for PF between them. The sprinters exhibited an almost certain significant higher RPF than the rugby players (P <.0001). Furthermore, the rugby players demonstrated almost certain to likely significant higher SDef from 40% to 70% 1RM (P <.05) compared with the sprinters. Overall, all strength-derived parameters were significantly related to functional performance. Conclusions: Elite sprinters present higher levels of RS and RPF, lower levels of SDef, and better sprint and jump performance than professional rugby players. Relative strength-derived values (RS and RPF) and SDef are significantly associated with speed–power measures and may be used as effective and practical indicators of athletic performance. [ABSTRACT FROM AUTHOR]

Purpose: Dozens of variables can be derived from the countermovement jump (CMJ). However, this does not guarantee an increase in useful information because many of the variables are highly correlated. Furthermore, practitioners should seek to find the simplest solution to performance testing and reporting challenges. The purpose of this investigation was to show how to apply dimensionality reduction to CMJ data with a view to offer practitioners solutions to aid applications in high-performance settings. Methods: The data were collected from 3 cohorts using 3 different devices. Dimensionality reduction was undertaken on the extracted variables by way of principal component analysis and maximum likelihood factor analysis. Results: Over 90% of the variance in each CMJ data set could be explained in 3 or 4 principal components. Similarly, 2 to 3 factors could successfully explain the CMJ. Conclusions: The application of dimensional reduction through principal component analysis and factor analysis allowed for the identification of key variables that strongly contributed to distinct aspects of jump performance. Practitioners and scientists can consider the information derived from these procedures in several ways to streamline the transfer of CMJ test information. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the association between the optimum power load in the bench press (BP), shoulder press (SP), and prone bench pull (PBP) exercises and acceleration (ACC) and speed performances in 11 National Team wheelchair basketball (WB) players with similar levels of disability. All athletes were previously familiarized with the testing procedures that were performed on the same day during the competitive period of the season. First, athletes performed a wheelchair 20-m sprint assessment and, subsequently, a maximum power load test to determine the mean propulsive power (MPP) in the BP, SP, and PBP. A Pearson product–moment correlation was used to examine the relationships between sprint velocity (VEL), ACC, and the MPP in the three exercises. The significance level was set as p <.05. Large to very large significant associations were observed between VEL and ACC and the MPP in the BP, SP, and PBP exercises (r varying from.60 to.77; p <.05). The results reveal that WB players who produce more power in these three exercises are also able to accelerate faster and achieve higher speeds over short distances. Given the key importance of high and successive ACCs during wheelchair game-related maneuvers, it is recommended that coaches frequently assess the optimum power load in BP, SP, and PBP in WB players, even during their regular training sessions. [ABSTRACT FROM AUTHOR]

Purpose: To identify the bar velocities that optimize power output in the barbell hip thrust exercise. Methods: A total of 40 athletes from 2 sports disciplines (30 track-and-field sprinters and jumpers and 10 rugby union players) participated in this study. Maximum bar-power outputs and their respective bar velocities were assessed in the barbell hip thrust exercise. Athletes were divided, using a median split analysis, into 2 groups according to their bar-power outputs in the barbell hip thrust exercise ("higher" and "lower" power groups). The magnitude-based inferences method was used to analyze the differences between groups in the power and velocity outcomes. To assess the precision of the bar velocities for determining the maximum power values, the coefficient of variation (CV%) was also calculated. Results: Athletes achieved the maximum power outputs at a mean velocity, mean propulsive velocity, and peak velocity of 0.92 (0.04) m·s−1 (CV: 4.1%), 1.02 (0.05) m·s−1 (CV: 4.4%), and 1.72 (0.14) m·s−1 (CV: 8.4%), respectively. No meaningful differences were observed in the optimum bar velocities between higher and lower power groups. Conclusions: Independent of the athletes' power output and bar-velocity variable, the optimum power loads frequently occur at very close bar velocities. [ABSTRACT FROM AUTHOR]

The aim of this study was to compare the peak force (PF), peak power (PP), and peak velocity (PV) outputs produced during half-squat (HS) and jump squat (JS) exercises executed at 20, 40, 60, and 80% of 1 repetition maximum (1RM) in the HS (HS 1RM) and to compute and compare the strength deficit (SDef) achieved in these exercises across these loads. Twenty-four national rugby union players (age: 25.7 ± 3.6 years) performed HS 1RM and a progressive loading test in the HS and JS exercises. The PF, PP, and PV values were obtained in all loads for both exercises, and the SDef was calculated as the percentage difference between the PF at distinct relative intensities and the PF at HS 1RM. The differences in HS and JS variables were determined using an analysis of variance with repeated measures. Higher PF, PP, and PV outputs were generated in the JS in comparison with the HS exercise (p < 0.05); moreover, the SDef magnitudes were significantly lower in the JS (p < 0.01), for all loading conditions. Importantly, the differences in SDef, and as a consequence, PF, PP, and PV decreased progressively with increasing load. Overall, the loaded JS exhibited increased levels of PF, PP, and PV and reduced levels of SDef when compared to the traditional HS performed across a range of loads. The JS is indicated to reduce the SDef and improve the athletes’ ability to apply force at higher velocities. Nevertheless, with heavier loads (i.e.,≥80% HS 1RM), its potential advantages and effectiveness may be seriously compromised. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the effects of strength-training tapers of different intensities but equal volume reductions on neuromuscular performance. Methods: Eleven strength-trained men (21.3 [3.3] y, 92.3 [17.6] kg, relative 1-repetition-maximum deadlift 1.9 [0.2] times bodyweight) completed a crossover study. Specifically, two 4-wk strength-training blocks were followed by a taper week with reduced volume (∼70%) involving either increased (5.9%) or decreased (−8.5%) intensity. Testing occurred pretraining (T1), posttraining (T2), and posttaper (T3). Salivary testosterone and cortisol, plasma creatine kinase, a Daily Analysis of Life Demands in Athletes questionnaire, countermovement jump (CMJ), isometric midthigh pull, and isometric bench press were measured. Results: CMJ height improved significantly over time (P <.001), with significant increases from T1 (38.0 [5.5] cm) to both T2 (39.3 [5.3] cm; P =.010) and T3 (40.0 [5.3] cm; P =.001) and from T2 to T3 (P =.002). CMJ flight time:contraction time increased significantly over time (P =.004), with significant increases from T1 (0.747 [0.162]) to T2 (0.791 [0.163]; P =.012). Isometric midthigh-pull relative peak force improved significantly over time (P =.033), with significant increases from T1 (34.7 [5.0] N/kg) to T2 (35.9 [4.8] N/kg; P =.013). No significant changes were found between tapers. However, the higher-intensity taper produced small effect-size increases at T3 vs T1 for isometric midthigh-pull relative peak force, CMJ height, and flight time:contraction time, while the lower-intensity taper only produced small effect-size improvements at T3 vs T1 for CMJ height. Conclusions: A strength-training taper with volume reductions had a positive effect on power, with a tendency for the higher-intensity taper to produce more favorable changes in strength and power. [ABSTRACT FROM AUTHOR]

Previous research established that male powerlifters have less range of motion (ROM) in several movements about the shoulder and hip compared with sedentary male subjects. It is unclear if these differences in ROM are related to strength, training type, and years of training experience or if individuals with less ROM have a better propensity to gain strength. The purpose of this study was to compare strength and ROM in male powerlifters and recreationally strength-trained male subjects and to determine if ROM would be an effective predictor of strength in these groups. Twelve powerlifters and 12 recreationally strength-trained control subjects completed 1 repetition maximum (1RM) squat and bench press testing. In a subsequent session, active ROM was measured, and velocity data were collected during submaximal squat repetitions. There was no significant difference (p > 0.05) between the groups for age, height, body mass, training experience, and training frequency. Powerlifters had significantly greater (p ≤ 0.05) training duration and absolute squat and bench press 1RM. Powerlifters had significantly less shoulder extension and horizontal abduction, and hip flexion, extension, and adduction than recreationally strength-trained men. Significant negative relationships were found between 2-lift Wilks score (body mass relative strength) and shoulder extension and horizontal abduction, as well as hip flexion and extension. In powerlifters, significant negative relationships were found between competition Wilks score, shoulder extension, and hip flexion. Because these relationships correspond to the bottom position of the squat and bench press, it may be best to ensure that shoulder extension and hip flexion remain sufficient to achieve competition depth. [ABSTRACT FROM AUTHOR]