Search

Validating numerical models against experimental models of nasal spray deposition is challenging since many aspects must be considered. That being said, it is a critical step in the product development process of nasal spray devices. This work presents the validation process of a nasal deposition model, which demonstrates a high degree of consistency of the numerical model with experimental data when the nasal cavity is segmented into two regions but not into three. Furthermore, by modelling the flow as stationary, the computational cost is drastically reduced while maintaining quality of particle deposition results. Thanks to this reduction, a sensitivity analysis of the numerical model could be performed, consisting of 96 simulations. The objective was to quantify the impact of four inputs: the spray half cone angle, mean spray exit velocity, breakup length from the nozzle exit and the diameter of the nozzle spray device, on the three quantities of interest: the percentage of the accumulated number of particles deposited on the anterior, middle and posterior sections of the nasal cavity. The results of the sensitivity analysis demonstrated that the deposition on anterior and middle sections are sensitive to injection angle and breakup length, and the deposition on posterior section is only, but highly, sensitive to the injection velocity., Peer Reviewed, Postprint (author's final draft)

This work intends to study the effect of aortic annulus eccentricity and leaflet rigidity on the performance, thrombogenic risk and calcification risk in bioprosthetic aortic valve replacements (BAVRs). To address these questions, a two-way immersed fluid–structure interaction (FSI) computational model was implemented in a high-performance computing (HPC) multi-physics simulation software, and validated against a well-known FSI benchmark. The aortic valve bioprosthesis model is qualitatively contrasted against experimental data, showing good agreement in closed and open states. Regarding the performance of BAVRs, the model predicts that increasing eccentricities yield lower geometric orifice areas (GOAs) and higher normalized transvalvular pressure gradients (TPGs) for healthy cardiac outputs during systole, agreeing with in vitro experiments. Regions with peak values of residence time are observed to grow with eccentricity in the sinus of Valsalva, indicating an elevated risk of thrombus formation for eccentric configurations. In addition, the computational model is used to analyze the effect of varying leaflet rigidity on both performance, thrombogenic and calcification risks with applications to tissue-engineered prostheses. For more rigid leaflets it predicts an increase in systolic and diastolic TPGs, and decrease in systolic GOA, which translates to decreased valve performance. The peak shear rate and residence time regions increase with leaflet rigidity, but their volume-averaged values were not significantly affected. Peak solid stresses are also analyzed, and observed to increase with rigidity, elevating risk of valve calcification and structural failure. To the authors' knowledge this is the first computational FSI model to study the effect of eccentricity or leaflet rigidity on thrombogenic biomarkers, providing a novel tool to aid device manufacturers and clinical practitioners., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 713673. The research leading to these results has also received funding from “la Caixa” Foundation, with fellowship ID: LCF/BQ/DI18/11660044, and has been co-funded by the project CompBioMed2 (H2020-EU.1.4.1.3. Grant No. 823712), Peer Reviewed, Postprint (published version)