Search

Purpose: To investigate the ultrastructure of the cleavage plane of human cornea after liquid‐bubble‐prepared tissue for Descemet's membrane endothelial keratoplasty (DMEK). Methods: Experimental study with scanning electron microscopy (SEM) and block‐face SEM of 18 corneal specimens. Fresh human research donor corneoscleral discs (n = 12) were prepared with liquid‐bubble technique or examined as untreated controls (n = 3). In addition, Descemet's membrane samples, n = 3, were obtained in DMEK surgery. Results: The cleavage plane after liquid‐bubble Descemet's membrane (DM) preparation was consistently located between interfacial matrix and posterior stromal collagen lamellae, providing a largely smooth surface exposing the amorphous interfacial zone without any significant amounts of adherent stromal remnants. No demarcation of a distinct pre‐DM layer could be detected. Conclusion: The DMEK graft preparation performed by liquid‐bubble technique showed a smooth cleavage plane and could not reveal any demarcation of a distinct pre‐DM layer. [ABSTRACT FROM AUTHOR]

Hydroxyapatite nanoparticles (nano-HAP) are receiving considerable attention for dental applications, and their adhesion to enamel is well established. However, there are no reports concerning the effects of HAP on other dental materials, and most of the studies in this field are based on in vitro designs, neglecting the salivary pellicle-apatite interactions. Thus, this in situ pilot study aims to evaluate the effects of three hydroxyapatite-based solutions and their interactions with different dental material surfaces under oral conditions. Hence, two volunteers carried intraoral splints with mounted samples from enamel and from three dental materials: titanium, ceramics, and polymethyl-methacrylate (PMMA). Three HAP watery solutions (5%) were prepared with different shapes and sizes of nano-HAP (HAP I, HAP II, HAP III). After 3 min of pellicle formation, 10 ml rinse was performed during 30 sec. Rinsing with water served as control. Samples were accessed immediately after rinsing, 30 min and 2 h after rinsing. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize the particles, and SEM evaluated the pellicle-HAP interactions. SEM and TEM results showed a high variation in the size range of the particles applied. A heterogeneous HAP layer was present after 2 h on enamel, titanium, ceramics, and PMMA surfaces under oral conditions. Bridge-like structures were visible between the nano-HAP and the pellicle formed on enamel, titanium, and PMMA surfaces. In conclusion, nano-HAP can adhere not only to enamel but also to artificial dental surfaces under oral conditions. The experiment showed that the acquired pellicle act as a bridge between the nano-HAP and the materials' surface. [ABSTRACT FROM AUTHOR]

The fibrotic encapsulation, which is mainly accompanied by an excessive proliferation of fibroblasts, is an undesired phenomenon after the implantation of various medical devices. Beside the surface chemistry, the topography plays also a major role in the fibroblast–surface interaction. In the present study, one‐dimensional aluminium oxide (1D Al2 O3) nanostructures with different distribution densities were prepared to reveal the response of human fibroblasts to the surface topography. The cell size, the cell number and the ability to form well‐defined actin fibres and focal adhesions were significantly impaired with increasing distribution density of the 1D Al2 O3 nanostructures on the substratum. [ABSTRACT FROM AUTHOR]

Copyright of Biota Neotropica is the property of Biota Neotropica and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract: The development of a seedling into an adult plant comprises various underground processes. Time-lapse photography (TLP) makes them visible. This is documented for Potentilla inclinata (Rosaceae) and Inula ensifolia (Asteraceae). After germination, P. inclinata develops a taproot system. Contraction phenomena pull the basal part of the shoot at least 10mm into the soil. Later, several adventitious roots are generated, and thus the root system changes to a fibrous one. This is followed by cloning without separation of the ramets. Seedlings of I. ensifolia develop a weak primary root. At an early stage, adventitious roots are formed at the leaf rosette. This fibrous root system exerts a strong pulling effect on the shoot. After one vegetation period the basis of the rosette is approx. 30mm under the soil surface. Cloning includes the formation of many new horizontal shoots, which conquer new sites. These two examples show three functional steps common in the developmental progress of subterranean systems: (I) establishment of the seedling, (II) innovation and survival of the young plant, and (III) reiteration (cloning and dispersal). However, to accomplish these basic development steps the diversity of subterranean systems is enhanced by different organographical components. Furthermore, the development of subterranean systems is a dynamic process consisting of two kinetic processes: the vertical movement during seedling establishment, which brings the innovation buds to a safe soil position, and the horizontal movement during dispersal, which conquers new sites. [Copyright &y& Elsevier]

Synthetic hydroxyapatite-based solution is a bioinspired material that may present anti-adhesive properties, restraining the dental biofilm formation without causing adverse effects. This in situ study aims to evaluate the effects of three different hydroxyapatite (HAP) watery solutions as a mouthwash against biofilm adhesion on different dental material surfaces under oral conditions. Hence, four volunteers carried maxillary splints containing enamel, titanium, ceramics, and polymethyl-methacrylate resin (PMMA) samples. Three HAP watery solutions (5%) were prepared with HAP particles presenting different shapes and sizes (HAP I, HAP II, HAP III). During 24 h, the volunteers rinsed two times with one of the following selected tested solution: HAP I, HAP II, HAP III, water, or chlorhexidine 0.2% (CHX). The first rinse was performed 3 min after pellicle formation; the second rinse occurred after a 12 h interval. The surface analysis was performed by scanning electron microscopy (SEM), fluorescence microscopy (FM), and transmission electron microscopy (TEM). Statistical and microscopic analysis showed that most samples treated with any HAP solution revealed reduced biofilm coverage presenting comparable results to CHX treated samples, however without altering the microorganisms' viability. In conclusion, the results of this investigation showed that a pure hydroxyapatite-based mouthrinse could be a promising bioinspired adjunct solution for biofilm management. [ABSTRACT FROM AUTHOR]

Abstract: In-stent restenosis is a common complication after stent surgery which leads to a dangerous wall narrowing of a blood vessel. Laser assisted patterning is one of the effective methods to modify the stent surface to control cell–surface interactions which play a major role in the restenosis. In this current study, 316LS stainless steel substrates are structured by focusing a femtosecond laser beam down to a spot size of 50μm. By altering the laser induced spot density three distinct surfaces (low density (LD), medium density (MD) and high density (HD)) were prepared. While such surfaces are composed of primary microstructures, due to fast melting and re-solidification by ultra-short laser pulses, nanofeatures are also observed as secondary structures. Following a detailed surface characterization (chemical and physical properties of the surface), we used a well-established co-culture assay of human microvascular endothelial cells and human fibroblasts to check the cell compatibility of the prepared surfaces. The surfaces were analyzed in terms of cell adherence, proliferation, cell morphology and the differentiation of the fibroblast into the myofibroblast, which is a process indicating a general fibrotic shift within a certain tissue. It is observed that myofibroblast proliferation decreases significantly on laser treated samples in comparison to non-treated ones. On the other hand endothelial cell proliferation is not affected by the surface topography which is composed of micro- and nanostructures. Such surfaces may be used to modify stent surfaces for prevention or at least reduction of restenosis. [Copyright &y& Elsevier]

Abstract: The effect of the micro- and nanotopography on vascular cell-surface interaction is investigated using nano- and microstructured Al2O3 as model substrate. Two different nanostructured Al2O3 surfaces composed of low density (LD) and high density (HD) nanowires (NWs) were synthesized by chemical vapour deposition (CVD) and commercially available microstructured Al2O3 plates were used for comparison. A clear diverging response of human umbilical vein endothelial cells (HUVEC) and human umbilical vein smooth muscle cells (HUVSMC) was observed on these nano- and microstructured surfaces. LD Al2O3 NWs seem to enhance the proliferation of HUVECs selectively. This selective control of the cell-surface interaction by topography may represent a key issue for the future stent material design. [Copyright &y& Elsevier]