Search

Surface hydrophobicity is an important factor in controlling the catalytic activity of heterogeneous catalysts in various reactions, particularly liquid-phase reactions using water as the (co)solvent. In this study, the surface hydrophobicity of Fe-ZSM-5 was successfully controlled using a simple coating method in which furfuryl alcohol was used as the carbon precursor. Various techniques, such as N2 physisorption, temperature-programmed desorption of ammonia, and contact angle measurements of water droplets, were used to characterize the catalysts. Fe-ZSM-5 catalysts with different degrees of hydrophobicity were used for the aqueous-phase selective oxidation of methane with H2O2. The positive effect of the surface carbon coating on the catalytic performance was confirmed when the carbon content was not sufficiently high to block the pores. [ABSTRACT FROM AUTHOR]

The dry reforming of methane (DRM) is a promising method for controlling greenhouse gas emissions by converting CO2 and CH4 into syngas, a mixture of CO and H2. Ni-based catalysts have been intensively investigated for their use in the DRM. However, they are limited by the formation of carbonaceous materials on their surfaces. In this review, we explore carbon-induced catalyst deactivation mechanisms and summarize the recent research progress in controlling and mitigating carbon deposition by developing coke-resistant Ni-based catalysts. This review emphasizes the significance of support, alloy, and catalyst structural strategies, and the importance of comprehending the interactions between catalyst components to achieve improved catalytic performance and stability. [ABSTRACT FROM AUTHOR]

Methane is an abundant and relatively clean fossil fuel resource; therefore, its utilization as a chemical feedstock has a major impact on the chemical industry. However, its inert nature makes direct conversion into value-added products difficult under mild conditions. Compared to the gas-phase selective oxidation of methane, there have been several recent advances in the liquid-phase conversion of methane. This review categorizes the reports on the liquid-phase selective oxidation of methane according to the solvent and oxidant used. The advantages and disadvantages of each approach are discussed. High yields of methyl bisulfate as a methanol precursor can be achieved using SO3 in sulfuric acid; however, more attention should be paid to the separation process and overall economic analysis. However, the aqueous-phase selective oxidation of methane with in situ generated H2O2 is quite promising from an environmental point of view, provided that an economical reducing agent can be used. Based on the current state-of-the-art on this topic, directions for future research are proposed. [ABSTRACT FROM AUTHOR]

The direct oxidation of methane to methanol is considered challenging due to the intrinsically low reactivity of the C–H bond of methane and the formation of a large number of unstable intermediates (methanol, formaldehyde, and formic acid) relative to the yield of methane. However, promising advances have recently been reported in this area based on the use of electrochemical systems that differ from traditional thermal catalysis. In this review, the recent advances in direct and indirect electrochemical methane conversion with homogeneous catalysts are reviewed and discussed, especially under low-temperature conditions. Finally, the limitations of the current electrochemical methane conversion technology and future research directions are discussed. [ABSTRACT FROM AUTHOR]

Photoelectrochemical (PEC) H2 production from water using solar energy is an ideal and environmentally friendly process. CuInS2 is a p-type semiconductor that offers many advantages for PEC H2 production. Therefore, this review summarizes studies on CuInS2-based PEC cells designed for H2 production. The theoretical background of PEC H2 evolution and properties of the CuInS2 semiconductor are initially explored. Subsequently, certain important strategies that have been executed to improve the activity and charge-separation characteristics of CuInS2 photoelectrodes are examined; these include CuInS2 synthesis methods, nanostructure development, heterojunction construction, and cocatalyst design. This review helps enhance the understanding of state-of-the-art CuInS2-based photocathodes to enable the development of superior equivalents for efficient PEC H2 production. [ABSTRACT FROM AUTHOR]

The selective oxidation of methane into methane oxygenates such as CH3OH and HCOOH with O2 is a promising technology for direct methane conversion. This study successfully demonstrates the partial oxidation of methane over Pd−Fe/ZSM‐5 catalysts in water, where H2O2 was generated in situ from H2 and O2. A low Pd content is essential for preventing agglomeration of Pd nanoparticles, and intimate contact between Pd and Fe species is beneficial for achieving high yields of methane oxygenates. This one‐body catalyst showed better catalytic performance than that of previously reported ones, especially at low temperatures. 0.28 %Pd–0.56 %Fe/ZSM‐5 exhibited a stable catalytic performance in a continuous flow reactor. [ABSTRACT FROM AUTHOR]

The electrochemical activation of CuInS2/MoSx for photoelectrochemical (PEC) H2 production was revealed for the first time through in operando Raman spectroscopy. During the activation process, the initial metallic MoSx phase was transformed to semiconducting MoSx, which facilitates charge carrier transfer between CuInS2 and MoSx. Ex situ X‐ray photoelectron spectroscopy and Raman spectroscopy suggest the existence of MoO3 after the activation process. However, apart from contradicting these results, in operando Raman spectroscopy revealed some of the intermediate steps of the activation process. [ABSTRACT FROM AUTHOR]