Search

The concept of “three whole education” has become the focus of the reform of ideological and political education, and the collaborative education of ideological and political education has become an inevitable trend in the development of ideological and political education in colleges and universities in the new era. This study starts from the ideological and political education in colleges and universities, analyzes the influence path of the improvement of students’ comprehensive quality under the perspective of three-whole-parenting, and constructs a system of ideological and political education based on three-whole-parenting. On this basis, in order to further analyze the effectiveness of comprehensive quality improvement, the quantile trace regression model is constructed, and a prediction model for the learning effectiveness of Civic and Political Education is established by combining the dynamic data of students’ status and characteristics. The results show that the error of the achievement prediction model is within ±2 points, and the correlation coefficients of the dimensions of social factors and social factors are greater than 0.426 and 0.51, respectively, which have a more significant effect on the improvement of comprehensive quality. School factors, family factors, and social factors are able to significantly positively affect the dimensions. P is less than 0.001, the college Civic Education on students’ comprehensive quality of the score of the average increase of about 27 points. This study proposes a solution path for exploring the influence factors of Civic and Political Education based on Three-Whole Parenting.

Corona Virus Disease 2019 (Corona Virus Disease 2019,COVID-19) has become a public health emergency that has attracted global attention because of its large-scale outbreak resulting in numerous human infections and deaths. COVID-19 is a highly contagious respiratory disease caused by novel coronavirus 2019-nCoV. Due to a large number of infections and fast transmission speed, it's significant to diagnose the infected people quickly and detect the asymptomatic infected people as soon as possible. At present, the preliminary screening is judged by the clinical manifestations of the patients, mainly involving the respiratory system, but recent studies have found that the patients infected with COVID-19 have unique oral manifestations, such as taste disturbance, xerostomia, halitosis, inflammation of salivary glands, necrotizing periodontal disease and some of them are earlier than typical symptoms such as dry cough, fever, etc. Paying attention to the oral manifestations of patients can further improve the COVID-19 screening procedure. At present, symptomatic treatment is mainly used for these oral symptoms.

Bacterial infection is the most common complication in wound healing, highlighting an urgent need for the development of innovative antibacterial technologies and treatments to address the growing threats posed by bacterial infections. Black phosphorus nanosheets (BPNSs), as a promising two‐dimensional nanomaterial, have been utilized in treating infected wounds. However, BP's limited stability restricts its application. In this study, we enhance BP's stability and its antibacterial properties by anchoring gallium ions (Ga3+) onto BP's surface, creating a novel antibacterial platform. This modification reduces BP's electron density and enhances its antibacterial capabilities through a synergistic effect. Under near‐infrared (NIR) irradiation, the BP/Ga3+ combination exerts antibacterial effects via photothermal therapy (PTT) and photodynamic therapy (PDT), while also releasing Ga3+. The Ga3+ employ a 'Trojan horse strategy' to disrupt iron metabolism, significantly boosting the antibacterial efficacy of the complex. This innovative material offers a viable alternative to antibiotics and holds significant promise for treating infected wounds and aiding skin reconstruction. [ABSTRACT FROM AUTHOR]

Background: Non‐small‐cell lung cancer (NSCLC) is the primary cause of brain metastases (BM). This study aimed to investigate differences in clinical and magnetic resonance imaging (MRI) features of BM between anaplastic lymphoma kinase (ALK) gene fusion (ALK+) and ALK wild‐type (ALK‐) NSCLC, and to preliminarily assess the efficacy of radiotherapy for treating BM. Methods: A retrospective analysis included 101 epidermal growth factor receptor (EGFR)‐ NSCLC patients with BM: 41 with ALK gene fusion and 60 being ALK‐. The brain MRI and clinical features were compared between different ALK status using the multivariate analysis, and a nomogram was constructed to predict ALK gene fusion. Fifty‐six patients who did not undergo cerebral surgery and had complete pre‐ and post‐ treatment data were further divided based on whether they received radiotherapy. Log‐rank test was used to compare the short‐term effect of treatment between the two groups under different genotypes. Results: ALK+ BM exhibited decreased peritumoral brain edema size, lower peritumoral brain edema index (PBEI), and a more homogeneous contrast enhancement pattern compared to ALK‐ BM. Age (OR = 1.04; 95%CI: 1.02–1.06), time to BM (OR = 1.50; 95% CI: 1.04–2.14), PBEI (OR = 1.26; 95% CI: 0.97–1.62), smoking status (smoking index >400 vs. non‐smoking status: OR = 1.42; 95% CI: 0.99–2.04) and contrast enhancement pattern (OR = 1.89; 95% CI: 1.28–2.78) were associated with ALK gene fusion. A nomogram based on these variables demonstrated acceptable predictive efficiency (AUC = 0.844). In the ALK+ group, patients who received radiotherapy did not show increased disease control rate (DCR) or progression‐free survival (PFS). In contrast, in the ALK‐ group, those who received radiotherapy had improved objective response rate (ORR), DCR, and PFS compared to those who were only treated with systemic therapy. Conclusions: The clinical and MRI features of BM can indicate the status of ALK in NSCLC. In the ALK‐ group, patients who received radiotherapy showed higher ORR, DCR, and PFS compared to those who did not. [ABSTRACT FROM AUTHOR]

Defects and the ion migration in perovskite single crystals seriously degrade the performance of corresponding devices, regardless of the outstanding optoelectronic properties. In this work, we demonstrated that the ion migration and the defect density in MAPbX3 perovskite single crystals can be suppressed via lowering the growth temperature to 4 °C (LT) of the liquid-diffusion induced crystallization method (LDSC). The MAPbBr3 single crystals grown with the LT-LDSC method demonstrated a full-width at half-maximum (FWHM) of the (100) X-ray rocking curves of 0.0104°, a fluorescence lifetime of 1090 ns, a trap state density of 3.03 × 109 cm−3, an ionic activation energy of 0.52 eV, and a μτ product of 3.22 × 10−2 cm2 V−1. The low defect density and the weak ion migration in MAPbX3 single crystals lead to good X-ray detection performance under higher bias voltage. The X-ray detector has a high sensitivity of 409 μC Gyair−1 cm−2 at a high bias voltage of −40 V, which is the highest bias voltage of this single crystal radiation detector. This method of low temperature growth is instructive to the study of the whole crystal growth. [ABSTRACT FROM AUTHOR]

Organometal halide perovskite single crystals are one of the most promising radiation detection materials due to their unique advantages of high absorption coefficient, long carrier diffusion length, and low defect density. However, the severe ion migration in perovskites deteriorates the X‐ray detection performance under longtime and high‐field operating conditions. This work reports an effective additive of chenodeoxycholic acid (CDCA), which can suppress the ion migration and improve the performance and the operational stability of FAPbBr3 single crystals (SCs) in X‐ray detection significantl. The CDCA molecules in precursors effectively suppress the decomposition of FA ions, resulting in a better crystal orientation and stoichiometry. The trace amounts of CDCA residues in FAPbBr3 SCs improve the thermal stability and effectively suppress the ion migration. The resulting detector shows an impressive X‐ray sensitivity up to 21 386.88 µC Gyair−1 cm−2 under −500 V and a detection limit of 15.23 nGyair s−1. The response current of the detector at 225 V cm−1 field is barely changed under the 7200 s irradiation with a dose rate of 1.949 mGyair s−1. This work provides insights for the additive selection and improving the operational stability of perovskite single crystals for commercial applications. [ABSTRACT FROM AUTHOR]

Low output power has long been the bottleneck of micro-radioisotope batteries as power supplies for the wireless sensor network, implantable medical equipment, and outer space exploration. Recently, x-ray radioluminescent batteries demonstrated the great potential to break the deadlock. In this work, we fabricated an x-ray radioluminescent battery with near milliwatt output power and demonstrated various potential applications. A 100% improvement on the conversion efficiency of 2.46% and the highest output power of 136.1 μW/cm2 were achieved when adopting a thallium doped cesium iodide (CsI:Tl) single-crystal scintillator in the battery. Subsequently, a 2 × 2 battery array was fabricated with a maximum output power of 466.9 μW and was used to power devices including micro-LEDs and a wireless sensor system with temperature monitoring. This demo system shows the feasibility of x-ray radioluminescent batteries as a long-lifetime micropower. The tremendous progress will draw broad attention on micro-nuclear batteries and inspire further exploration on the applications in the field of medical devices, space explorations, and Internet of Things. [ABSTRACT FROM AUTHOR]

Low energy conversion efficiency and low output power are the major limiting factors of isotope batteries as miniature power supplies for the broad applications, such as micro-electromechanical systems and aerospace electronics. In this work, highly efficient x-ray radioluminescent batteries are demonstrated based on single-crystal scintillators and spectra-matched photovoltaic batteries. X-ray sources are chosen to reduce the backscattering loss, and cerium doped Gd3Al2Ga3O12 (GAGG:Ce) single-crystal scintillators are adopted to improve the radioluminescence efficiency and light coupling efficiency, for their high x-ray absorption ability and high light-yield. The bandgap of photovoltaic battery is also optimized to match the luminescence spectrum of GAGG:Ce to maximize the photovoltaic efficiency. An optimal radioluminescent battery is achieved with an output power of 13.4 μW/cm2 and a conversion efficiency of 1.28%, which is a 10.7-times improvement in the previous best reports (0.12%). This exciting progress indicates the promising potential of radioluminescent batteries in broad applications and will inspire the further exploration for the research community of radioisotope batteries. [ABSTRACT FROM AUTHOR]

Objectives. To evaluate the utility of radiomics features in differentiating central lung cancers and atelectasis on contrast-enhanced computed tomography (CT) images. This study is retrospective. Materials and Methods. In this study, 36 patients with central pulmonary cancer and atelectasis between July 2013 and June 2018 were identified. A total of 1,653 2D and 2,327 3D radiomics features were extracted from segmented lung cancers and atelectasis on contrast-enhanced CT. The refined features were investigated for usefulness in classifying lung cancer and atelectasis according to the information gain, and 10 models were trained based on these features. The classification model is trained and tested at the region level and pixel level, respectively. Results. Among all the extracted features, 334 2D features and 1,507 3D features had an information gain (IG) greater than 0.1. The highest accuracy (AC) of the region classifiers was 0.9375. The best Dice score, Hausdorff distance, and voxel AC were 0.2076, 45.28, and 0.8675, respectively. Conclusions. Radiomics features derived from contrast-enhanced CT images can differentiate lung cancers and atelectasis at the regional and voxel levels. [ABSTRACT FROM AUTHOR]

Full utilization of all three major components of biomass (glucan, xylan and lignin) is considered to be the key to commercialization of bio-refinery process of biomass. In this work, based on pretreatment severity (PS), a controlled magnesium bisulfite pretreatment (MBSP) was developed to produce ethanol, xylo -oligosaccharides (XOS) and magnesium lignosulfonate (ML) simultaneously. After MBSP at PS 3.66 (170 °C for 40 min), about 136 g of ethanol, 98 g of XOS and 133 g of ML were achieved from1 kg raw wheat straw. As high values-added chemicals, XOS has many applications in food and pharmaceutical industries while ML can be used as surfactants and dispersing agents. These results suggest that a controlled MBSP offers an effective way to fully utilize its components and coproduce ethanol, XOS and ML from wheat straw. [ABSTRACT FROM AUTHOR]

This study investigated the shifts of bacterial and archaea diversity suffering the organic load shocks during the start-up. To demonstrate the effects of organic load shock, six reactors was operated in different OLR for 31 days. The community was analyzed using denaturing gradient gel electrophoresis (DGGE) and quantitative PCR. Findings revealed that bacteria diversity was the poorest and archaea quantity was the fewest when suffering OLR shock. MST and MSC were found to the more vulnerable methanogenic archaea groups during organic overloading. Our results explained why gradually increasing OLR is good for favoring the growth of an active biofilm and reactor successful startup quickly during the start-up from the perspective of microbial. [ABSTRACT FROM AUTHOR]