Search

Room temperature phosphorescence carbon dots (RTP CDs) are one of the newly investigated nanomaterials because of their remarkable optical characteristics. They are widely utilized in many versatile optoelectronic and security applications. Apart from synthesis, one of its challenging attributes is its lifetime at room temperature. Here, a straightforward and quick heating approach is presented for synthesizing self‐matrix 1,10 phenanthroline and boron‐based RTP CDs. 1,10 phenanthroline is utilized as an aromatic and hetero atom containing carbon precursor and boric acid is used as a passivating to stabilize the triplet excitons and prevent nonradiative deactivation. Various characterization techniques like TEM, XRD, FTIR, UV–vis, PL, and elemental analysis (ICP and CHNS) have been used to study the properties of self‐matrix RTP CDs. The RTP CDs exhibited excellent blue‐green emission when excited at 302 nm. Compared to the available literature, the novelty of this work is observed from its high naked eye phosphorescence characteristic of ≈22 s with an average lifetime of ≈ 2.4 s at 302 nm, making them ultralong self‐matrix RTP CD material. Due to their exceptional qualities, the self‐matrix RTP CDs have been widely employed for various applications, including information encryption decryption, phosphor for LEDs, anticounterfeiting, and water sensitivity analysis. [ABSTRACT FROM AUTHOR]

A wearable and stretchable strain sensor with a gauge factor above 23 was prepared using a simple and effective technique. Conducting nanocomposite strands were prepared from styrene-b-(ethylene-co-butylene)-b-styrene triblock copolymer (SEBS) and carbon black (CB) through a solvent-processing method that uses a syringe pump. This novel nanocomposite preparation technique is a straightforward and cost-effective process and is reported in the literature for the first time. The work included two stages: the flexible nanocomposite preparation stage and the piezoresistive sensor stage. Depending on its molecular structure, the thermoelastic polymer SEBS is highly resilient to stress and strain. The main aim of this work is to fabricate a highly flexible and piezoresistive nanocomposite fibre/strand. Among the prepared composites, a composite corresponding to a composition just above the percolation threshold was selected to prepare the strain sensor, which exhibited good flexibility and conductivity and a large piezoresistive effect that was linearly dependent on the applied strain. The prepared nanocomposite sensor was stitched onto a sports T-shirt. Commercially available knee and elbow sleeves were also purchased, and the nanocomposite SEBS/CB strands were sewn separately on the two sleeves. The results showed a high sensitivity of the sensing element in the case of breathing activity (normal breathing, a 35% change, and deep breathing at 135%, respectively). In the case of knee and elbow movements, simultaneous measurements were performed and found that the sensor was able to detect movement cycles during walking. [ABSTRACT FROM AUTHOR]

In this study, cellulose was carbonized in two-steps using hydrothermal and thermal carbonization in sequence, leading to a novel carbonaceous material prepared from a renewable source using a sustainable method without any chemicals and, moreover, giving high yields after a treatment at 600 °C in an inert atmosphere. During this treatment, cellulose was transformed to uniform microspheres with increased specific surface area and, more importantly, conductivity increased by about 7 orders of magnitude. The successful transition of cellulose to conducting carbonaceous microspheres was confirmed through SEM, FTIR, X-ray diffraction and Raman spectroscopy. Prepared samples were further used as a dispersed phase in electrorheological fluids, exhibiting outstanding electrorheological effects with yield stress over 100 Pa at an electric field strength 1.5 kV mm−1 and a particle concentration of only 5 wt%, significantly overcoming recent state-of-the-art findings. Impedance spectroscopy analysis showed clear interfacial polarization of this ER fluid with high dielectric relaxation strength and short relaxation time, which corresponded to increased conductivity of the particles when compared to pure cellulose. These novel carbonaceous particles prepared from renewable cellulose have further potential to be utilized in many other applications that demand conducting carbonaceous structures with high specific surface area (adsorption, catalyst, filtration, energy storage). [ABSTRACT FROM AUTHOR]

A simple straightforward method for fabrication of patterns of metallic nanostructures and the application of focused ion beam (FIB) lithography to locally modify a native Si[O.sub.2] layer on a silicon substrate are described. The results proposed that the island formation at patterned sites are due to reduced surface diffusion of Co atoms in the vicinity of FIB modified areas and the lowered kinetic diffusion limits improved the island morphology.

A one-step microwave-assisted polyol method was used to fabricate FexZn1−xO (x = 0.01, 0.05, 0.10) nanoparticles. Zinc acetate dihydrate, iron (III) acetylacetonate, oleic acid and diethylene glycol were placed in a Teflon-lined reaction vessel. The reaction mixture was heated up to 250 °C for 15 min in a microwave reactor. The surface modification with oleic acid prevented agglomeration of the nanoparticles. The X-ray diffraction analysis revealed characteristics wurtzite hexagonal structure of ZnO and successful incorporation of the Fe dopant into the host crystal lattice. Doping of ZnO by Fe led to bandgap modification as estimated by Tauc plot. The as-prepared nanopowders were dispersed in toluene and mixed with a poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) polymer to make stable homogenous dispersions. Then, the FexZn1−xO/MEH-PPV nanocomposite thin films were prepared by spin coating and used as thin active layers in polymer light-emitting diodes. The thickness of deposited FexZn1−xO/MEH-PPV film was ca. 30 nm and that of reference neat MEH-PPV film was ca. 25 nm. The electroluminescent spectroscopy study showed that direct blending of MEH-PPV with Fe-doped ZnO nanoparticles is a simple and effective approach to significantly increase the luminance intensity of the diode in comparison to the diode fabricated by neat MEH-PPV. [ABSTRACT FROM AUTHOR]

The gadolinium (Gd3+) substituted zinc ferrite nanoparticles (ZnFe2−xGdxO4) for Gd3+ (x = 0.00, 0.05, 0.10, 0.20) have been synthesized by honey mediated sol-gel auto-combustion method. The X-ray diffraction study revealed the formation of spinel ferrite crystal structure. The Raman spectroscopy and Fourier transform infrared spectroscopy study well support the XRD results analysis. The field emission scanning electron microscopy micrograph revealed spherical morphology and grain size around 10-30 nm for ZnFe2−xGdxO4 (x = 0.10) nanoparticles. The presence of Zn2+ and Fe3+ oxidation state in synthesized nanoparticles was confirmed by X-ray photoelectron spectroscopy. Magnetic properties of the Gd3+ substituted zinc ferrite nanoparticles were investigated by vibrating sample magnetometer at room temperature. The conversion of magnetic hysteresis curves from ferromagnetic to a paramagnetic with the substitution of Gd3+ in zinc ferrite nanoparticles was observed. Frequency dependent dielectric constant and ac conductivity measurements revealed that Gd3+ substitution improved the value of dielectric constant and ac conductivity of the Gd3+ substituted zinc ferrite nanoparticles. Further, the existence of two semicircles in Cole-Cole plot demonstrated the role of both grains and grain boundaries to conduction process in synthesized Gd3+ ion substituted zinc ferrite nanoparticles. Furthermore, the grain relaxation time (τg), grain boundary relaxation time (τgb), grain resistance (Rg), grain capacitance (Cg), grain boundary resistance (Rgb) and grain boundary capacitance (Cgb) for synthesized ZnFe2−xGdxO4 (x = 0.00, 0.05, 0.10, 0.20) nanoparticles have been calculated using modulus spectroscopy analysis. [ABSTRACT FROM AUTHOR]

Abstract Co x Zn 1-x O (x = 0.01, 0.05 and 0.1) nanoparticles were prepared by microwave-assisted polyol method from zinc acetate dihydrate and Co(II) acetylacetonate. The reactions were performed in diethylene glycol (DEG) at 250 °C with the use of oleic acid as a surfactant. Resulting nanoparticle (ca. 10 nm) precipitates were washed with methanol and dried or kept as colloidal solutions redispersed in toluene. Colloidal solutions were mixed with the Poly [2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) polymer to produce thin nanocomposite layers with specific optoelectronic properties. The electronic structure in terms of density of states (DOS) of MEH-PPV and MEH-PPV/nanocomposite layers was investigated by recently proposed energy resolved electrochemical impedance spectroscopy method. The MEH-PPV polymer and its nanocomposites with ZnO or Co x Zn 1-x O nanoparticles were used as thin active layers in polymer light emitting diodes (PLED). The nanocomposite layers exhibited optoelectronic properties which were found to be beneficial as the active layer in PLEDs, exhibiting an order of magnitude enhancement in electroluminescence intensity. A pronounced effect on the opening bias voltage of final devices with Co x Zn 1-x O nanoparticles was also observed. Graphical abstract Image 1 Highlights • Original facile microwave-assisted synthesis of Co x Zn 1-x O nanocolloids is reported. • Solution of MEH-PPV polymer and Co x Zn 1-x O nanodispersions mix without precipitation. • MEH-PPV/Co x Zn 1-x O composite layers electronic structure mapping by ER-EIS technique. • PLEDs with MEH-PPV/Co x Zn 1-x O nanocomposite active layer were successfully prepared. • The PLEDs with MEH-PPV/Co x Zn 1-x O layer exhibited lowering of opening bias voltage. [ABSTRACT FROM AUTHOR]

Ideally hexagonally ordered TiO2 nanotube layers were produced through the optimized anodization of Ti substrates. The Ti substrates were firstly covered with a TiN protecting layer prepared through atomic layer deposition (ALD). Pre-texturing of the TiN-protected Ti substrate on an area of 20×20 μm2 was carried out by focused ion beam (FIB) milling, yielding uniform nanoholes with a hexagonal arrangement throughout the TiN layer with three different interpore distances. The subsequent anodic nanotube growth using ethylene-glycol-based electrolyte followed the pre-textured nanoholes, resulting in perfectly ordered nanotube layers (resembling honeycomb porous anodic alumina) without any point defects and with a thickness of approximately 2 μm over the whole area of the pattern. [ABSTRACT FROM AUTHOR]

This review is devoted to non-hydrolytic sol-gel chemistry. During the last 25 years, non-hydrolytic sol-gel (NHSG) techniques were found to be attractive and versatile methods for the preparation of oxide materials. Compared to conventional hydrolytic approaches, the NHSG route allows reaction control at the atomic scale resulting in homogeneous and well defined products. Due to these features and the ability to design specific materials, the products of NHSG reactions have been used in many fields of application. The aim of this review is to present an overview of NHSG research in recent years with an emphasis on the syntheses of mixed oxides, silicates and phosphates. The first part of the review highlights well known condensation reactions with some deeper insights into their mechanism and also presents novel condensation reactions established in NHSG chemistry in recent years. In the second section we discuss porosity control and novel compositions of selected materials. In the last part, the applications of NHSG derived materials as heterogeneous catalysts and supports, luminescent materials and electrode materials in Li-ion batteries are described. [ABSTRACT FROM AUTHOR]

Non-hydrolytic sol–gel reactions of silicon acetates with trimethylsilyl (TMS) esters of phosphoric and phosphonic acids produce cross-linked matrices containing homogeneous dispersions of silicate and phosphoryl groups connected together by networks of Si–O–P(=O) linkages. The condensation degrees reach 80 to 90%. Residual organic groups (10 to 20%) were reacted with a variety of compounds (H2O, Me3SiOSiMe3, POCl3, SiCl4, AlMe3, Al(NMe2)3, and AlCl3) in order to enrich the surface of these porous matrices with Brønsted (≡P–OH) and Lewis (tetracoordinated Al) acid functional groups. The differences in the reactivity of ≡Si–OAc and ≡P–OSiMe3 groups were utilized for the selective modification at the silicon and phosphorus atoms. The reaction procedures were optimized and significantly porous silicophosphate materials with a high content of either hydroxyl groups or four-coordinated aluminium species were obtained. The activity and selectivity of prepared samples as catalysts for the dimerization of α-methylstyrene were tested. Excellent activities and moderate to very high selectivities were achieved suggesting the potential use of silicophosphate xerogels in heterogeneous catalysis. [ABSTRACT FROM AUTHOR]