Search

Tensor fields are useful for modeling the structure of biological tissues. The challenge to measure tensor fields involves acquiring sufficient data of scalar measurements that are physically achievable and reconstructing tensors from as few projections as possible for efficient applications in medical imaging. In this paper, we present a filtered back-projection algorithm for the reconstruction of a symmetric second-rank tensor field from directional X-ray projections about three axes. The tensor field is decomposed into a solenoidal and irrotational component, each of three unknowns. Using the Fourier projection theorem, a filtered back-projection algorithm is derived to reconstruct the solenoidal and irrotational components from projections acquired around three axes. A simple illustrative phantom consisting of two spherical shells and a 3D digital cardiac diffusion image obtained from diffusion tensor MRI of an excised human heart are used to simulate directional X-ray projections. The simulations validate the mathematical derivations and demonstrate reasonable noise properties of the algorithm. The decomposition of the tensor field into solenoidal and irrotational components provides insight into the development of algorithms for reconstructing tensor fields with sufficient samples in terms of the type of directional projections and the necessary orbits for the acquisition of the projections of the tensor field.

PurposeIn this work, we present tomographic simulations of a new hardware concept for X-ray phase-contrast interferometry wherein the phase gratings are replaced with an array of Fresnel biprisms, and Moiré fringe analysis is used instead of "phase stepping" popular with grating-based setups.MethodsProjections of a phantom consisting of four layers of parallel carbon microfibers is simulated using wave optics representation of X-ray electromagnetic waves. Simulated projections of a phantom with preferential scatter perpendicular to the direction of the fibers are performed to analyze the extraction of small-angle scatter from dark-field projections for the following: (1) biprism interferometry using Moiré fringe analysis; (2) grating interferometry using phase stepping with eight grating steps; and (3) grating interferometry using Moiré fringe analysis. Dark-field projections are modeled as projections of voxel intensities represented by a fixed finite vector basis set of scattering directions. An iterative MLEM algorithm is used to reconstruct, from simulated projection data, the coefficients of a fixed set of seven basis vectors at each voxel representing the small-angle scatter distribution.ResultsResults of reconstructed vector coefficients are shown comparing the three simulated imaging configurations. The single-exposure Moiré fringe analysis shows not only an increase in noise because of one-eighth the number of projection samples but also is obtained with less dose and faster acquisition times. Furthermore, replacing grating interferometry with biprism interferometry provides better contrast-to-noise.ConclusionThe simulations demonstrate the feasibility of the reconstruction of dark-field data acquired with a biprism interferometry system. With the potential of higher fringe visibility, biprism interferometry with Moiré fringe analysis might provide equal or better image quality to that of phase stepping methods with less imaging time and lower dose.

PurposeSingle photon emission computed tomography (SPECT) scanners using cadmium zinc telluride (CZT) offer compact, lightweight, and improved imaging capability over conventional NaI(Tl)-based SPECT scanners. The main purpose in this study is to propose a full-ring SPECT system design with eight large-area CZT detectors that can be used for a broad spectrum of SPECT radiopharmaceuticals and demonstrate the performance of our system in comparison to the reference conventional NaI(Tl)-based two-head Anger cameras.MethodsA newly designed full-ring SPECT system is composed of eight large-area CZT cameras (128 mm × 179.2 mm effective area) that can be independently swiveled around their own axes of rotation independently and can have radial motion for varying aperture sizes that can be adapted to different sizes of imaging volume. Extended projection data were generated by conjoining projections of two adjacent detectors to overcome the limited field-of-view (FOV) by each CZT camera. Using Monte Carlo simulations, we evaluated this new system design with digital phantoms including a Derenzo hot rod phantom and a Zubal brain phantom. Comparison of performance metrics such as spatial resolution, sensitivity, contrast-to-noise ratio (CNR), and contrast-recovery ratio was made between our design and conventional SPECT scanners having different pixel sizes and radii of rotation (one clinically well-known type and two arbitrary types matched to our proposed CZT-SPECT geometries).ResultsThe proposed scanner could result in up to about three times faster in acquisition time over conventional scan time at same acquisition time per step. The spatial resolution improvement, or deterioration, of our proposed scanner compared to the clinical-type scanner was dependent upon the location of the point source. However, there were overall performance improvements over the three different setups of the conventional scanner particularly in volume sensitivity (approximately up to 1.7 times). Overall, we successfully reconstructed the phantom image for both 99m Tc-based perfusion and 123 I-based dopamine transporter (DaT) brain studies simulated for our new design. In particular, the striatal/background contrast-recovery ratio in 3-to-1 reference ratio was over 0.8 for the 123 I-based DaT study.ConclusionsWe proposed a variable-aperture full-ring SPECT system using combined pixelated CZT and energy-optimized parallel-hole collimator modules and evaluated the performance of this scanner using relevant digital phantoms and MC simulations. Our studies demonstrated the potential of our new full-ring CZT-SPECT design, showing reduced acquisition time and improved sensitivity with acceptable CNR and spatial resolution.

In order to improve the photoluminescence (PL) performance of SiC, a three-layer structure porous SiC film was designed, the substrate was single crystal Si, the middle layer was the double pass anodic aluminum oxide (AAO) template, and the top layer was SiC film. SiC film was deposited on AAO template by magnetron sputtering, the deposition temperature was 100 °C to 500 °C, and the deposition time was 1 min to 30 min. The effect of deposition temperature and time on PL property of SiC was investigated. The results show that the SiC film is amorphous phase, and SiC is mainly deposited on the upper skeleton structure of AAO template. At the deposition temperature of 200 °C and deposition time of 1 min, the PL intensity of SiC is enhanced to 14.23 times of blank sample. PL of porous SiC film is mainly from the main peak of 2.3 eV and the secondary peak of 2.8 eV. The main PL peak may be caused by the 0 vacancy in Al2O3 and SiC intrinsic PL. The secondary PL peak maybe comes from 0 vacancy in SiO2. The magnetron sputtering processing combined with AAO template is suitable to the rapid industrial fabrication of porous SiC film. [ABSTRACT FROM AUTHOR]

Introduction: This study aimed to evaluate the clinical value of iodine-131 combined with levothyroxine sodium in the treatment of patients with differentiated thyroid cancer (DTC) after surgery. Methods: Prospective randomized controlled studies were conducted. A total of 374 DTC patients who underwent total or near-total thyroidectomy in the Department of Thyroid Surgery, Tianjin Union Medical Center and Tianjin Medical University General Hospital, from January 2019 to February 2022 were selected and divided into control group (187 cases) and observation group (187 cases) according to random number table method. The control group was treated with levothyroxine sodium after surgery, and the observation group was treated with iodine-131 on the basis of the control group. Gender, age, course of disease, tumor diameter, pathological type, TNM classification, treatment effect, thyroglobulin (Tg) levels before and after treatment, SF-36 health status questionnaires (SF-36), occurrence of adverse reactions after treatment, and recurrence rate of 1-year follow-up were compared and analyzed between the two groups. Results: There was no significant difference in baseline data between the two groups. After treatment, the effective rate of the observation group increased by 11.23% compared to the control group, with a statistically significant difference (91.98% vs. 80.75%, p < 0.05). There was no significant difference in Tg level and scores of SF-36 evaluation including physical functioning, physical problems, vitality, pain, mental health, emotional problems, social functioning, and general health perception between the two groups before surgery (p > 0.05), Tg levels and scores of SF-36 evaluation in all dimensions were significantly improved in both groups after treatment (p < 0.05), and the levels of Tg and scores of SF-36 in all dimensions in observation group were significantly better than those in control group after treatment (p < 0.001). There was no significant difference in the incidence of adverse reactions between the two groups (p > 0.05). The recurrence rate in the observation group was 5.89% lower than that in the control group 1 year after treatment, with a statistically significant difference (2.67% vs. 8.56%, p < 0.05). Conclusions: The combination of iodine-131 and levothyroxine sodium in the postoperative treatment of DTC can improve the therapeutic effect and reduce the postoperative recurrence rate without increasing adverse reactions, which is worthy of clinical reference and promotion. [ABSTRACT FROM AUTHOR]