Search

Polyethylene (PE), a highly prevalent non‐biodegradable polymer in the field of plastics, presents a waste management issue. To alleviate this issue, bio‐based PE (bio‐PE), derived from renewable resources like corn and sugarcane, offers an environmentally friendly alternative. This review discusses various production methods of bio‐PE, including fermentation, gasification, and catalytic conversion of biomass. Interestingly, the bio‐PE production volumes and market are expanding due to the growing environmental concerns and regulatory pressures. Additionally, the production of PE and bio‐PE biocomposites using agricultural waste as filler materials, highlights the growing demand for sustainable alternatives to conventional plastics. According to previous studies, addition of ≈50% defibrillated corn and abaca fibers into bio‐PE matrix and a compatibilizer, results in the highest Young's modulus of 4.61 and 5.81 GPa, respectively. These biocomposites have potential applications in automotive, building construction, and furniture industries. Moreover, the advancement made in abiotic and biotic degradation of PE and PE biocomposites is elucidated to address their environmental impacts. Finally, the paper concludes with insights into the opportunities, challenges, and future perspectives in the sustainable production and utilization of PE and bio‐PE biocomposites. In summary, production of PE and bio‐PE biocomposites can contribute to a cleaner and sustainable future. [ABSTRACT FROM AUTHOR]

Controlling how a material interacts with light is key to optimizing its optical properties to fit a desired function or application. The most straightforward approach is to chemically or physically modify the surface exposed to incident light. An effective method of surface modification is based on the addition of core‐shell structures at the surface. Of particular importance to many technological applications are core‐shell structures with dimensions comparable to the wavelengths of light extending from the UV up to the near‐IR region of the electromagnetic spectrum, which coincides with the major part of the solar spectrum. Surface modification approaches to tailor the optical properties of materials in this range of wavelengths are increasingly relevant in the context of materials and devices used in sustainable energy applications, such as solar cells and heat‐reflective paints. These materials are useful to mitigate the current energy and climate crises by allowing for enhanced energy harvesting and improved thermal management, respectively. Here, recent progress in the fabrication and application of core‐shell micro‐/nano‐structures for the modification of light interaction with surfaces is highlighted. Some limitations and future directions for the design of core‐shell materials are also discussed. [ABSTRACT FROM AUTHOR]

Carbon fiber-reinforced polymer (CFRP) composites are highly functional composites which comprise two major components: the polymer matrix and the carbon fiber. Lightweight and having high strength, CFRPs have been used heavily in various industries such as wind, aerospace and automobile. The increasing demand and extensive use led to a huge quantum of CFRP waste from both end-of-life and during manufacturing. Out of this waste, only 2% is recycled, the rest are disposed of via incineration and/or landfill. This has raised significant environmental and sustainability concerns. The current state-of-the-art way of recycling CFRPs is by pyrolysis. However, through the pyrolysis process, the polymer used in the CFRPs, which accounts for around 65–75 wt.%, cannot be recovered and reused. In most publications, the focus on CFRP recycling was on the recovering of the more valuable carbon fiber. The polymer matrix is mostly burnt off, in the case of pyrolysis, or disposed. To obtain full circularity, recovering and reusing both the carbon fiber and polymer is necessary. In this paper, we primarily focus on the recovered bisphenol-A type of epoxy polymer (REP) obtained from solvolysis digestion of CFRP and explore the feasibility of reusing this REP by blending it with pristine epoxy in various compositions to create new materials. The physical and mechanical properties, including decomposition temperatures (Td), glass transition temperatures (Tg), storage modulus, loss modulus, flexural and tensile strength, were characterized using thermal gravity analyzer (TGA), differential scanning calorimetry (DSC), dynamic mechanical analyzer (DMA) and Instron universal tester. The results indicate a decrease in glass transition and decomposition temperature, and mechanical properties as the blending composition increases. This suggests that the total blending composition should not exceed 10 wt.%, with an optimal range potentially falling between 5 to 6 wt.%. [ABSTRACT FROM AUTHOR]

Polypropylene (PP) is among the most widely used commodity plastics in our everyday life due to its low cost, lightweight, easy processability, and exceptional chemical, thermo‐mechanical characteristics. The growing awareness on energy and environmental crisis has driven global efforts for creating a circular economy via developing sustainable and eco‐friendly alternatives to traditional plastics produced from fossil fuels for a variety of end‐use applications. This review paper presents a brief outline of the emerging bio‐based PP derived from renewable natural resources, covering its production routes, market analysis and potential utilizations. This contribution also provides a comprehensive review of the PP‐based biocomposites produced with diverse green fillers generated from agro‐industrial wastes, with particular emphasis on the structural modification, processing techniques, mechanical properties, and practical applications. Furthermore, given that the majority of PP products are currently destined for landfills, research progress on enhancing the degradation of PP and its biocomposites is also presented in light of the environmental concerns. Finally, a brief conclusion with discussions on challenges and future perspectives are provided. [ABSTRACT FROM AUTHOR]

The structural battery is a multifunctional energy storage device that aims to address the weight and volume efficiency issues that conventional batteries face, especially in electric transportation. By combining the functions of mechanical load bearing and energy storage, structural batteries can reduce the reliance on, or even eventually replace the main power source in an electric vehicle or a drone. However, one of the key challenges to be addressed before achieving multifunctionality in structural batteries would be the design of a suitable multifunctional structural battery electrolyte. The structural battery electrolyte is the constituent that provides mechanical integrity under flexural loads or impact and hence determines the electrochemical and much of the mechanical performance of a structural battery device. This concept paper aims to cover the key considerations and challenges facing the design of structural battery electrolytes. In addition, the main approaches to surmount these challenges are highlighted, keeping design aspects like sustainability and recyclability in view. [ABSTRACT FROM AUTHOR]

Materials with negative Poisson's ratio have attracted considerable attention and offered high potential applications as biomedical devices due to their ability to expand in every direction when stretched. Although negative Poisson's ratio has been obtained in various base materials such as metals and polymers, there are very limited works on hydrogels due to their intrinsic brittleness. Herein, we report the use of methacrylated cellulose nanocrystals (CNCMAs) as a macro‐cross‐linking agent in poly(2‐hydroxyethyl methacrylate) (pHEMA) hydrogels for 3D printing of auxetic structures. Our developed CNCMA‐pHEMA hydrogels exhibit significant improvements in mechanical properties, which is attributed to the coexistence of multiple chemical and physical interactions between the pHEMA and CNCMAs. Structures printed by using CNCMA‐pHEMA hydrogels show auxetic behavior with greatly enhanced toughness and stretchability compared to the hydrogel with a traditional cross‐linking agent. Such strong and tough auxetic hydrogels would contribute toward establishing advanced flexible implantable devices such as biodegradable oesophageal self‐expandable stents. [ABSTRACT FROM AUTHOR]