Search

11th Warnemunde Turbulence Days on Linking Ocean Mixing and Circulation at Various Scales What: Forty-five participants from 10 countries met to discuss contemporary issues of marine turbulence with a focus on the linkage between mixing and overturning circulation on all scales (https://www.io-warnemuende.de/wtd-2023.html). When: 17-20 September 2023 Where: Rostock, Germany KEYWORDS: Eddies; Inertia-gravity waves; Meridional overturning circulation; Mixing; Ocean circulation; Turbulence, 1. Introduction Walter Munk, in his famous abyssal recipes, showed more than half a century ago that the strength of the global overturning circulation is closely linked to diapycnal mixing. [...]

Thank you to the 1396 reviewers who provided 2328 reviews during 2023 to ensure the quality and integrity of JGR‐Oceans manuscripts. Key Point: Thank you to our 2023 peer reviewers [ABSTRACT FROM AUTHOR]

Turbulent diapycnal mixing is important for the estuarine circulation between basins of the Baltic Sea as well as for its local ecosystems, in particular with regard to eutrophication and anoxic conditions. While the interior of the basins is overall relatively calm, stratified flow over steep bathymetric features is known as a source of strong turbulent mixing. Yet, current in situ observations often cannot capture the spatio-temporal development of dynamic and intermittent turbulent mixing related to overflows over rough bathymetry. We present observational oceanographic data together with openly accessible high-resolution bathymetry from a prototypical sill and an adjacent deep channel in the sparsely sampled Southern Quark located in the Åland Sea, connecting the northern Baltic Proper with the Bothnian Sea. Our data were acquired during two 1-week cruises on R/V Electra in February–March 2019 and 2020. We collected high-resolution broadband acoustic observations of turbulent mixing together with in situ microstructure profiler measurements, and current velocities from acoustic Doppler current profilers. We found that a temporally reversing non-tidal stratified flow over the steep bathymetric sill created a dynamic and extremely energetic environment. The observed flow reversed during both cruises on timescales of a few days. Saltier, warmer, and less oxygenated deep water south of the sill was partly blocked, the reversing flow was at times hydraulically controlled with hydraulic jumps occurring on both sides of the sill, and high spatial variability occurred in the surface layer on small scales. Dissipation rates of turbulent kinetic energy, vertical turbulent diffusivities, and vertical salt flux rates were increased by 3–4 orders of magnitude in the entire water column in the vicinity of the sill compared to reference stations not directly influenced by the overflow with average dissipation rates near the sill between 10 -7 and 10 -6 W kg -1 , average vertical diffusivities of 0.001 m 2 s -1 in the halocline and up to 0.1 m 2 s -1 below the halocline, and average vertical salt flux rates around 0.01 g m -2 s -1 in the halocline and between 0.1 and 1 g m -2 s -1 below the halocline. We suggest, based on acoustic observations and in situ measurements, that the underlying mechanism for the highly increased mixing across the halocline is a combination of shear and topographic lee waves breaking at the halocline interface. We anticipate that the resulting deep- and surface-water modification in the Southern Quark directly impacts exchange processes between the Bothnian Sea and the northern Baltic Proper and that the observed mixing is likely important for oxygen and nutrient conditions in the Bothnian Sea. [ABSTRACT FROM AUTHOR]

Plain Language Summary: Thank you to the 1528 reviewers who provided 2647 reviews during 2022 to ensure the high quality and integrity of JGR‐Oceans manuscripts. Key Points: The editors thank the 2022 peer reviewersNew editorial practices reduce pressure on reviewersCo‐reviewer tool allows collaboration with students and postdocs [ABSTRACT FROM AUTHOR]

Turbulent diapycnal mixing is important for the estuarine circulation between basins of the Baltic Sea as well as for its local ecosystems, in particular with regard to eutrophication and anoxic conditions. While the interior of the basins is overall relatively calm, stratified flow over steep bathymetric features is known as a source for strong turbulent mixing. Yet, current in situ observations often cannot capture dynamic and intermittent turbulent mixing related to overflow over rough bathymetry. We present observational oceanographic data together with openly accessible high-resolution bathymetry from a prototypical sill and an adjacent deep channel in the sparsely-sampled Southern Quark located in the Åland Sea, connecting the Northern Baltic Proper with the Bothnian Sea. Our data include high resolution broadband acoustic observations of turbulent mixing, in situ microstructure profiler measurements, and current velocities from Acoustic Doppler Current Profilers and were acquired during two one-week cruises in February–March 2019 and 202. A temporally reversing non-tidal stratified flow over the steep bathymetric sill created a dynamic and extremely energetic environment. Saltier, warmer, and less oxygenated deep water south of the sill was partly blocked, the reversing flow was at times hydraulically controlled with hydraulic jumps occurring on both sides of the sill, and sub-mesoscale processes in the surface layer leading to high spatial variability at small scales. Mixing and vertical salt flux rates were increased by 3–4 orders of magnitude in the entire water column in the vicinity of the sill compared to reference stations not directly influenced by the overflow. We suggest based on acoustic observations and in situ measurements that underlying mechanisms for the highly increased mixing across the halocline are a combination of shear and topographic lee waves which are breaking at the halocline interface. We anticipate that the resulting deep- and surface-water modification in the Southern Quark directly impacts exchange processes between the Bothnian Sea and the Northern Baltic Proper and that the observed mixing is likely important for oxygen and nutrient conditions in the Bothnian Sea. Our results contribute to the knowledge on turbulent mixing processes in the Åland Sea and can help to improve mixing parametrizations in numerical models of the area. [ABSTRACT FROM AUTHOR]

Stratified oceanic turbulence is strongly intermittent in time and space, and therefore generally underresolved by currently available in situ observational approaches. A promising tool to at least partly overcome this constraint are broadband acoustic observations of turbulent microstructure that have the potential to provide mixing parameters at orders of magnitude higher resolution compared to conventional approaches. Here, we discuss the applicability, limitations, and measurement uncertainties of this approach for some prototypical turbulent flows (stratified shear layers, turbulent flow across a sill), based on a comparison of broadband acoustic observations and data from a free-falling turbulence microstructure profiler. We find that broadband acoustics are able to provide a quantitative description of turbulence energy dissipation in stratified shear layers (correlation coefficient r = 0.84) if the stratification parameters required by the method are carefully preprocessed. Essential components of our suggested preprocessing algorithm are 1) a vertical low-pass filtering of temperature and salinity profiles at a scale slightly larger than the Ozmidov length scale of turbulence and 2) an automated elimination of weakly stratified layers according to a gradient threshold criterion. We also show that in weakly stratified conditions, the acoustic approach may yield acceptable results if representative averaged vertical temperature and salinity gradients rather than local gradients are used. Our findings provide a step toward routine turbulence measurements in the upper ocean from moving vessels by combining broadband acoustics with in situ CTD profiles. [ABSTRACT FROM AUTHOR]

JGR‐Oceans receives many more submissions from a broader demographic of authors than in the past and burnout among reviewers as well as potential bias among editors is threatening excellence and equity at the journal. To confront these issues, we have implemented some new editorial strategies that are anticipated to provide a fairer and more rewarding peer‐review experience for authors, as well as alleviate pressure on reviewers and deliver high quality science for readers. First, we have recruited a dozen new editors from across the world who better reflect our author demographic and who can make wiser and more inclusive decisions about the running of the journal. Second, we now require that each manuscript clearly communicate new understanding about the ocean before we send it out for review. This simple rubric deflects potentially biased editorial decisions based on author attributes and brings us closer to the original scope of JGR‐Oceans. Third, we are facilitating a culture of collaboration among reviewers and among ourselves, the editors, that brings more balanced decision‐making to reviews and manuscripts and provides authors more feedback. Our aim is to better help authors communicate their science with confidence and clarity. Finally, JGR‐Oceans has always been a multi‐disciplinary journal and we are encouraging more submissions that convey new understanding of biogeochemical processes and human interact ocean variability and change. Key Points: JGR‐Oceans has diversified the editorial board and implemented new editorial strategies [ABSTRACT FROM AUTHOR]

Observations from the global ocean have long confirmed the ubiquity of thermohaline inversions in the upper ocean, often accompanied by a clear signal in biogeochemical properties. Their emergence has been linked to different processes such as double diffusion, mesoscale stirring, frontal subduction, and the recently discussed submesoscale features. This study uses the central Baltic Sea as a natural laboratory to explore the formation of salinity inversions in the thermocline region during summer. We use realistic high‐resolution simulations complemented by field observations to identify the dominant generation mechanism and potential hotspots of their emergence. We propose that the strongly stratified thermocline can host distinct salinity minima during summer conditions resulting primarily from the interaction between lateral surface salinity gradients and wind‐induced differential advection. Since this is a generic mechanism, such salinity inversions can likely constitute a typical feature of the upper ocean in regions with distinct thermoclines and shallow mixed layers. Plain Language Summary: The upper ocean is characterized by a well‐mixed surface layer, below which temperature decreases rapidly with depth, forming the so‐called thermocline region. A corresponding salinity increase with depth is typically anticipated for stable density stratification to occur. Temperature and salinity inversions can, however, emerge in the upper ocean. Such thermohaline inversions have been observed in different regions of the world's oceans, and various mechanisms have been proposed to explain their generation. Here, the central basin of the Baltic Sea is used as a natural laboratory to explore the formation of distinct salinity minima in the thermocline region during summer conditions. Using high‐resolution numerical simulations and measurements from a field campaign, we show that inversions are abundant and can emerge throughout the entire basin. They increase with increasing wind speeds and concentrate mainly in regions with strong lateral salinity differences. We propose that thermocline salinity minima can occur during summer when the wind transports saltier water over less saline surface waters. This is a generic mechanism that can therefore be responsible for the formation of the salinity inversions observed worldwide in areas with distinct thermoclines and shallow mixed layers. Key Points: Observations collected in the central Baltic Sea during summer indicate patches of distinct salinity minima in the thermocline regionRealistic high‐resolution simulations are used to explore the origin of the salinity minima and to identify the hotspots of their genesisLateral surface salinity gradients interacting with wind‐induced differential advection are shown to generate most of the inversions [ABSTRACT FROM AUTHOR]

Plain Language Summary: Thank you to the 1,371 reviewers who provided 2,661 reviews during 2021 to ensure the same quality and integrity of JGR‐O manuscripts. Key Point: The editors thank the 2021 peer reviewers [ABSTRACT FROM AUTHOR]

Basal melting of marine‐terminating glaciers, through its impact on the forces that control the flow of the glaciers, is one of the major factors determining sea level rise in a world of global warming. Detailed quantitative understanding of dynamic and thermodynamic processes in melt‐water plumes underneath the ice‐ocean interface is essential for calculating the subglacial melt rate. The aim of this study is therefore to develop a numerical model of high spatial and process resolution to consistently reproduce the transports of heat and salt from the ambient water across the plume into the glacial ice. Based on boundary layer relations for momentum and tracers, stationary analytical solutions for the vertical structure of subglacial non‐rotational plumes are derived, including entrainment at the plume base. These solutions are used to develop and test convergent numerical formulations for the momentum and tracer fluxes across the ice‐ocean interface. After implementation of these formulations into a water‐column model coupled to a second‐moment turbulence closure model, simulations of a transient rotational subglacial plume are performed. The simulated entrainment rate of ambient water entering the plume at its base is compared to existing entrainment parameterizations based on bulk properties of the plume. A sensitivity study with variations of interfacial slope, interfacial roughness and ambient water temperature reveals substantial performance differences between these bulk formulations. An existing entrainment parameterization based on the Froude number and the Ekman number proves to have the highest predictive skill. Recalibration to subglacial plumes using a variable drag coefficient further improves its performance. Plain Language Summary: In a world of global warming, the melting of glaciers terminating as floating ice tongues into the oceans of Arctic and Antarctic regions allows those glaciers to flow faster and hence to make a considerable contribution to global mean sea‐level rise. Underneath the ice‐ocean interface, turbulent currents of the order of 10 m thickness (so‐called plumes) develop that transport the melt water from the grounding line where the glacier enters the ocean toward the calving front that marks the seaward end of the glacier. At its base, ambient relatively warm and salty ocean water is mixed into the plumes and is vertically transported toward the ice‐ocean interface, where the melting is increased due to the additional heat supply. Understanding these processes is essential for their incorporation into computer models for the prediction of such melt processes. In this study, an accurate simulation model for the water column is constructed that is able to consistently reproduce these processes. The algorithms developed here are proven to provide reliable results also for models with only a few grid points across the plume and can therefore be implemented into climate models with surface‐following coordinates to more accurately simulate future scenarios of sea level rise. Key Points: A vertically resolving model with second‐moment turbulence closure has been constructed for subglacial plumesConvergent numerical formulations for the ocean‐to‐ice fluxes of momentum, freshwater and heat have been derived from an analytical modelModel results are consistent with bulk parameterizations for the entrainment of ambient water [ABSTRACT FROM AUTHOR]

Recent high-resolution numerical simulations have shown that the diurnal variability in the atmospheric forcing strongly affects the dynamics, stability, and turbulence of submesoscale structures in the surface boundary layer (SBL). Field observations supporting the real-ocean relevance of these studies are, however, largely lacking at the moment. Here, the impact of large diurnal variations in the surface heat flux on a dense submesoscale upwelling filament in the Benguela upwelling system is investigated, based on a combination of densely spaced turbulence microstructure observations and surface drifter data. Our data show that during nighttime and early morning conditions, when solar radiation is still weak, frontal turbulence is generated by a mix of symmetric and shear instability. In this situation, turbulent diapycnal mixing is approximately balanced by frontal restratification associated with the cross-front secondary circulation. During daytime, when solar radiation is close to its peak value, the SBL quickly restratifies, the conditions for frontal instability are no longer fulfilled, and SBL turbulence collapses except for a thin wind-driven layer near the surface. The drifter data suggest that inertial oscillations periodically modulate the stability characteristics and energetics of the submesoscale fronts bounding the filament. [ABSTRACT FROM AUTHOR]

The General Ocean Turbulence Model (GOTM) is a one-dimensional water column model, including a set of state-of-the-art turbulence closure models, and has widely been used in various applications in the ocean modeling community. Here, we extend GOTM to include a set of newly developed ocean surface vertical mixing parameterizations of Langmuir turbulence via coupling with the Community Vertical Mixing Project (CVMix). A Stokes drift module is also implemented in GOTM to provide the necessary ocean surface waves information to the Langmuir turbulence parameterizations, as well as to facilitate future development and evaluation of new Langmuir turbulence parameterizations. In addition, a streamlined workflow with Python and Jupyter notebooks is also described, enabled by the newly developed and more flexible configuration capability of GOTM. The newly implemented Langmuir turbulence parameterizations are evaluated against theoretical scalings and available observations in four test cases, including an idealized wind-driven entrainment case and three realistic cases at Ocean Station Papa, the northern North Sea, and the central Baltic Sea, and compared with the existing general length scale scheme in GOTM. The results are consistent with previous studies. This development extends the capability of GOTM towards including the effects of ocean surface waves and provides useful toolsets for the ocean modeling community to further study the effects of Langmuir turbulence in a broader scope. [ABSTRACT FROM AUTHOR]

Recently discovered, ocean submesoscales have attracted considerable attention due to their ability to change the upper ocean stratification, affect vertical transport, and induce a downscale cascade of energy toward dissipation. In this paper, we highlight the effect of submesoscale fronts and filaments on surface layer properties and dynamics during storm events, extending previous idealized simulations toward real‐ocean applications. Here, we use the Baltic Sea as a natural laboratory to study the rich submesoscale activity of this system with the help of realistic high‐resolution numerical simulations. These simulations reveal a wealth of cold submesoscale filaments with sharp lateral buoyancy gradients, strong surface convergence, and high vertical velocities. Highly heterogeneous Mixed Layer Depth (MLD) modulations are associated with these features, maintaining locally reduced MLDs even during storm events due to vigorous submesoscale restratification. The interaction of near‐surface turbulence and submesoscale restratification results in strong and highly efficient mixing inside the submesoscale fronts. Focusing on a typical filament, it is shown that frontogenesis is associated with the convergent cross‐front circulation arising from a turbulent thermal wind balance, consistent with previous studies. We show that the sharp fronts generated by this process may become symmetrically unstable, and show enhanced (modeled) energy dissipation rates that are in good quantitative agreement with existing theoretical estimates. Plain Language Summary: Recent studies have revealed that horizontal density differences on scales of 0.1–10 km (submesoscales) are ubiquitous in the surface mixed layer and play an essential role in its evolution. Submesoscale features can restratify, that is, bring warm water above cold water and shallow the depth of the mixed layer, which along with their high vertical velocities, makes them particularly relevant for biology. In this study, we highlight the effect of submesoscales on the restratification process and near‐surface turbulence during the lifetime of storms, thereby extending previous idealized simulations toward real‐ocean applications. We analyze a realistic high‐resolution numerical simulation focusing on the central Baltic Sea, an area where observations from a field campaign confirm that it constitutes a hotspot of submesoscale activity, hence forming an ideal natural laboratory. The simulation reveals a strong lateral temperature gradient that persists during autumn. The basin is found to be rich in submesoscale features that create shallow and heterogeneous Mixed Layer Depths (MLDs). The MLD presents high temporal variability, with the submesoscales being able to maintain shallow MLDs during storms and induce rapid restratification when the wind subsides. Submesoscale restratification tends to counteract the destratification effect caused by atmospheric forcing, yielding stably stratified patches. Key Points: Using realistic simulations a strong surface front, characterized by intense submesoscale activity, was identified in the central Baltic SeaSubmesoscales maintain shallow mixed layers during storms and induce rapid restratification afterward creating stably stratified patchesThe interaction of near‐surface turbulence and submesoscale restratification results in highly efficient mixing inside submesoscale fronts [ABSTRACT FROM AUTHOR]

Narrow baroclinic fronts are observed in the surface mixed layer (SML) of the Baltic Sea following an autumn storm. The fronts are subjected to hydrodynamic instabilities that lead to submesoscale and turbulent motions while restratifying the SML. We describe observations from an ocean glider that combines currents, stratification, and turbulence microstructure in a high horizontal resolution (150–300 m) to analyze such fronts. The observations show that SML turbulence is strongly modulated by frontal activity, acting as both source and sink for turbulent kinetic energy. In particular, a direct route to turbulent dissipation within the front is linked to shear instability caused by elevated nongeostrophic shear. The turbulent dissipation of frontal kinetic energy is large enough that it could be a significant influence in the evolution of the front and demonstrates that small‐scale turbulence can act as a significant sink of submesoscale kinetic energy. Key Points: An autonomous ocean glider observed turbulence, currents, and stratification in surface mixed layer submesoscale fronts following a stormSubmesoscale fronts provide both a damping and generation of surface mixed layer turbulenceShear instability within the front could represent a significant energy transfer in frontal evolution [ABSTRACT FROM AUTHOR]

Based on high-resolution turbulence microstructure and near-surface velocity data, frontal instability and its relation to turbulence are investigated inside a transient upwelling filament in the Benguela upwelling system (southeast Atlantic). The focus of our study is a sharp submesoscale front located at the edge of the filament, characterized by persistent downfront winds, a strong frontal jet, and vigorous turbulence. Our analysis reveals three distinct frontal stability regimes. (i) On the light side of the front, a 30-40-m-deep turbulent surface layer with low potential vorticity (PV) was identified. This low-PV region exhibited a welldefined two-layer structure with a convective (Ekman-forced) upper layer and a stably stratified lower layer, where turbulence was driven by forced symmetric instability (FSI). Dissipation rates in this region scaled with the Ekman buoyancy flux, in excellent quantitative agreement with recent numerical simulations of FSI. (ii) Inside the cyclonic flank of the frontal jet, near the maximum of the cross-front density gradient, the cyclonic vorticity was sufficiently strong to suppress FSI. Turbulence in this region was driven by marginal shear instability. (iii) Inside the anticyclonic flank of the frontal jet, conditions for mixed inertial/symmetric instability were satisfied. Our data provide direct evidence for the relevance of FSI, inertial instability, and marginal shear instability for overall kinetic energy dissipation in submesoscale fronts and filaments. [ABSTRACT FROM AUTHOR]

The criticisms on the Umlauf and Burchard generic two-equation model are briefed. It is clearly demonstrated that the generic model with arbitrary real exponents, often criticized as unphysical, is identical to a well-accepted model type without odd powers of physical quantities though this approach might be of little practical relevance.

Summary: Lateral intrusions of oxygen caused by small‐scale mixing are thought to shape microbial activity in marine redoxclines. To examine the response of prokaryotes to such mixing events we employed a shipboard mixing experiment in the euxinic central Baltic Sea: oxic, nitrate containing and sulfidic water samples without detectable oxygenized substances were incubated directly or after mixing. While nitrate, nitrite and ammonium concentrations stayed approximately constant in all incubations, we observed a decrease of sulfide after the contact with oxygen in the sulfide containing incubations. The transcription of marker genes from chemolithoauthotrophic key players including archaeal nitrifiers as well as gammaproteobacterial and campylobacterial autotrophic organisms that couple denitrification with sulfur‐oxidation were followed at four time points within 8.5 h. The temporally contrasting transcriptional profiles of gammaproteobacterial and campylobacterial denitrifiers that depend on the same inorganic substrates pointed to a niche separation. Particular archaeal and campylobacterial marker genes involved in nitrification, denitrification and sulfur oxidation, which depend on oxidized substrates, were highly upregulated in the anaerobic sulfidic samples. We suggest that, despite the absence of measurable oxygenated compounds in the sulfidic water, frequent intermittent small‐scale intrusions stimulate the permanent upregulation of genes involved in nitrification, denitrification and sulfur oxidation. [ABSTRACT FROM AUTHOR]

In most observations of diffusive convection in the ocean and in lakes, the characteristic diffusive staircases evolve over long time scales under quasi-stationary background conditions. In the Baltic Sea, however, diffusive staircases develop inside the flanks of intermittent intrusions that induce strong inverse temperature gradients over a vertical range of a few meters, varying on time scales of hours to days. Here, results are discussed from an extensive field campaign conducted in summer 2016 in the southern Baltic Sea, including temperature microstructure data from ocean gliders and an autonomous profiling platform. We find conditions favorable for diffusive instability in the vicinity of warm and cold intrusions with density ratios as small as RΔ 5 1.3. The staircases evolving under these conditions are characterized by a small number of steps (typically 1-4) with order 0.1-1-m thickness, temperature differences exceeding 1K across individual diffusive interfaces, and exceptionally large diffusive heat fluxes of order 10W-2. The standard heat flux parameterization of Kelley agrees within a factor of 2 with the directly observed interfacial heat fluxes, except for large fluxes at low RΔ, which are strongly overestimated. The glider surveys reveal a surprisingly small lateral coherency of order 100m of the staircase patterns, and a spreading of the diffusively unstable intrusions across isopycnals. [ABSTRACT FROM AUTHOR]

Intrusions of large amounts of dense and oxygen-rich waters during so-called Major Baltic Inflows (MBIs) form an essential component of the Baltic Sea overturning circulation and deepwater ventilation. Despite their importance, however, detailed observations of the processes occurring in the central basins during an MBI are virtually lacking. Here data from a long-term deployment of an autonomous profiling platform located in the center of one of the main basins are presented, providing the first direct and detailed view of the deepwater modifications and dynamics induced by one of the largest MBIs ever recorded (MBI 2014/2015). Approximately, 21 Gmol of oxygen were imported during three distinct inflow phases with an unexpectedly large contribution of oxic intrusions at intermediate depth. Oxygen consumption rates during the stagnation period immediately following the inflow phase was found to be 87 g m−2 yr−1 with a dominant contribution of sedimentary oxygen demand. The most energetic deepwater processes (topographic and near-inertial waves) were only marginally affected by the inflow; however, subinertial energy levels associated with intrusions and eddies were strongly enhanced. Turbulence microstructure data revealed that the deep interior regions remain essentially nonturbulent even during the energetic conditions of an MBI, emphasizing the importance of boundary mixing. Warm intrusions frequently showed a temperature fine structure with vertical scales of the order of 0.1 m, without any signs of active turbulence. At the upper flanks of these intrusions, double-diffusive staircases were often found to develop, suggesting an important alternative mixing process during inflow conditions. [ABSTRACT FROM AUTHOR]

Tidal straining is known to have an important impact on the generation of residual currents and the transport of suspended material in estuaries and the coastal ocean. Essential for this process is an externally imposed horizontal density gradient, typically resulting from either freshwater runoff or differential heating. Here, it is shown that near sloping topography, tidal straining may effectively transport suspended material across isobaths even if freshwater runoff and differential heating do not play a significant role. A combined theoretical and idealized modeling approach is used to illustrate the basic mechanisms and implications of this new process. The main finding of this study is that, for a wide range of conditions, suspended material is transported upslope by a pumping mechanism that is in many respects similar to classical tidal pumping. Downslope transport may also occur, however, only for the special cases of slowly sinking material in the vicinity of slopes with a slope angle larger than a critical threshold. The effective residual velocity at which suspended material is transported across isobaths is a significant fraction of the tidal velocity amplitude (up to 40% in some cases), suggesting that suspended material may be transported over large distances during a single tidal cycle. [ABSTRACT FROM AUTHOR]

Turbulent bottom Ekman layers are among the most important energy conversion sites in the ocean. Their energetics are notoriously complex, in particular near sloping topography, where the feedback between cross-slope Ekman transports, buoyancy forcing, and mixing affects the energy budget in ways that are not well understood. Here, the authors attempt to clarify the energy pathways and different routes to mixing, using a combined theoretical and modeling approach. The analysis is based on a newly developed energy flux diagram for turbulent Ekman layers near sloping topography that allows for an exact definition of the different energy reservoirs and energy pathways. Using a second-moment turbulence model, it is shown that mixing efficiencies increase for increasing slope angle and interior stratification, but do not exceed the threshold of 5% except for very steep slopes, where the canonical value of 20% may be reached. Available potential energy generated by cross-slope advection may equal up to 70% of the energy lost to dissipation for upwelling-favorable flow, and up to 40% for downwelling-favorable flow. [ABSTRACT FROM AUTHOR]

Cross-channel transect measurements of microstructure and velocity in a well-mixed and curved tidal inlet in the German Wadden Sea show the occurrence of significant late flood stratification. This stratification is found to be a result of lateral straining. This study observes a strong single-cell lateral circulation, which is strongly pronounced at late flood and absent during most of ebb. This tidal asymmetry is caused by a systematic interplay between centrifugal forcing and the lateral baroclinic pressure gradient. During flood a positive feedback between the terms generates strong lateral circulation, whereas during ebb a negative feedback leads to a suppression of the cross-channel exchange. A theoretical framework based on vorticity is developed, which allows lateral and longitudinal circulation to be studied in a consistent way. With this framework it is possible to show that the tidal asymmetry of the lateral flow is a major driver of residual longitudinal estuarine circulation, here identified with the tidally averaged across-channel vorticity component. [ABSTRACT FROM AUTHOR]

The interaction of shear, stratification, and turbulence in boundary layers on sloping topography is investigated with the help of an idealized theoretical model, assuming uniform bottom slope and homogeneity in the upslope direction. It is shown theoretically that the irreversible vertical buoyancy flux generated in the boundary layer is directly proportional to the molecular destruction rate of small-scale buoyancy variance, which can be inferred, for example, from microstructure observations. Dimensional analysis of the equations shows that, for harmonic boundary layer forcing and no rotation, the problem is governed by three nondimensional parameters (slope angle, roughness number, and ratio of forcing and buoyancy frequencies). Solution of the equations with a second-moment closure model for the turbulent fluxes reveals the periodic generation of gravitationally unstable boundary layers during upslope flow, consistent with available observations. Investigation of the nondimensional parameter space with the help of this model illustrates a systematic increase of the bulk mixing efficiencies for (i) steep slopes and (ii) low-frequency forcing. Except for very steep slopes, mixing efficiencies are substantially smaller than the classical value of ΓΓ == 0.2. [ABSTRACT FROM AUTHOR]

The physics of shallow gravity currents passing through a rotating channel at subcritical Froude number is investigated here with a series of idealized numerical experiments. It is found that the combined effects of friction and rotation set up a complex transverse circulation that has some crucial implications for the entrainment process. A key component of this secondary circulation is a geostrophically balanced transverse jet in the interface that laterally drains fluid from the interface. This effect is shown to result in a strong cross-channel asymmetry and a spatial separation of the entrainment process: drained interfacial fluid is partly replaced by entrained ambient fluid on the deep side of the gravity current, whereas the downward mixing of buoyant fluid occurs on the shallow side. These results, closely corresponding to recent measurements in a shallow, channelized gravity current in the western Baltic Sea, illustrate that the description of entrainment as a strictly vertical mixing process with the help of local bulk parameters like the Froude number is not generally applicable in rotating gravity currents. [ABSTRACT FROM AUTHOR]

Large-scale geophysical flows often exhibit layers with negligible vertical shear and infinite gradient Richardson number Ri. It is well known that these layers may be regions of active mixing, even in the absence of local shear production of turbulence because, among other processes, turbulence may be supplied by vertical turbulent transport from neighboring regions. This observation is contrasted by the behavior of most turbulence parameterizations used in ocean climate modeling, predicting the collapse of mixing of mass and matter if the Richardson number exceeds a critical threshold. Here, the performance of a simple model without critical Richardson number is evaluated, taking into account the diffusion of turbulence into layers without shear production and therefore avoiding the suppression of mixing at large values of Ri. The model is based on the framework of second-moment turbulence closures, focusing on the consistent modeling of the turbulent length scale for strongly stratified turbulence. Results are compared to eddy-resolving simulations of stratified shear flows that have recently become available. The model is simple enough for inclusion in ocean climate models. [ABSTRACT FROM AUTHOR]

The physics of frictional control for channelized rotating gravity currents are analyzed using an extensive dataset including hydrographic, current, and microstructure measurements from the western Baltic Sea. Rotational effects in these gravity currents, characterized by Ekman numbers of the order of one and subcritical Froude numbers, induce a complex transverse circulation that strongly affects the internal dynamics. The key component of this circulation is a geostrophically balanced transverse jet in the interface that modifies the entrainment process by (i) laterally draining the interface and (ii) providing additional interfacial shear comparable to the down-channel shear. The recirculation of mixed interfacial fluid into the interior distorts the internal density structure of the gravity current, and creates a thermal wind shear in the interior that is comparable to the observed shear. Using a theoretical model, this effect is shown to be responsible for the three-layer structure of the transverse velocity with the near-bottom velocity and stress directed opposite to the Ekman transport. The analysis confirms the key assumption in available models for frictional control in rotating gravity currents: the transverse Ekman transport is balanced by the geostrophic transport due to the down-channel tilt of the interface. [ABSTRACT FROM AUTHOR]

A detailed dataset describing a quasi-stationary bottom gravity current, approximately 10 m thick and 10 km wide, passing through a channel-like constriction in the western Baltic Sea is presented. The data include full-depth, synoptic, and highly resolved transects of stratification and turbulence parameters, as well as detailed velocity transects across the gravity current at different down-channel locations. The velocity data reveal a persistent transverse circulation, creating a characteristic wedge-shaped density structure in the interface. A strong asymmetry was also found in the interior of the gravity current, where the evolution of a dynamically significant transverse density gradient to the right of the down-channel flow was observed. Spectral analysis of the near-bottom velocities showed a surprisingly strong contribution to the bottom stress from low-frequency motions with periods up to 30 min that are possibly related to internal wave effects. Cross-channel transects of shear microstructure were used to investigate the transverse variation of local entrainment rates and bottom stresses. These data indicate that frictional control is essential for this class of gravity currents that are characterized by subcritical Froude numbers, small entrainment, strong rotational effects, and small thickness compared to the bottom Ekman layer. [ABSTRACT FROM AUTHOR]

Abstract: We investigate mixing processes under stratified conditions on the Northwest European Continental shelf using a numerical model (POLCOMS). Our results indicate that convection induced by vertical shearing of horizontal density gradients (‘shear-induced convection’) is a regularly occurring feature in the bottom and surface boundary layers in this open shelf-sea situation. Two types of turbulence models are investigated to study their capability for reproducing the observed location of tidal mixing fronts, and the physical processes occurring in seasonally stratified waters. The first model is a one-equation variant of the Mellor–Yamada model, whereas the second model combines a more recent second-momentum closure with a two-equation model. It is found that generally mean frontal positions (as estimated from ICES data) are predicted more accurately by the two-equation model. The one-equation model reproduces the mean frontal locations to 18.1km (<3 grid spacings) and the two-equation model to 17.1km; although in the Celtic Sea the accuracy is ∼33 and ∼12km, respectively. Comparison with historical tide gauges, current metres, CTD stations, and thermistor chain data from the North Sea Project all show an improvement in accuracy when the two-equation model is used. This is particularly apparent in the model''s ability to reproduce the spring–neap variability during stratification. We find that in the presence of shear-induced convection the routinely applied clipping of the turbulent length-scale, previously thought to be a minor ingredient in a turbulence model, has a dramatic effect on the results: if the length-scale clipping is not applied, substantial over-mixing is observed to occur. The causes and possible remedies of this effect are investigated. Overall our results demonstrate a sensitivity to the details of the turbulence model that is significantly greater than previously thought. [Copyright &y& Elsevier]

A 19-h time series of dissipation, stratification, and horizontal velocities has been obtained for a dense gravity current flowing into the Arkona Basin in the western Baltic Sea. The observations are compared with one-dimensional, quasi-steady theory, in which the gravity component in the flow direction is balanced by bottom friction, while that in the cross-flow direction is balanced by the Coriolis force. The observations deviate from the theory in that the bottom shear stress is more than 2 times as large as that required to balance the gravity. Several reasons for this discrepancy are discussed. A 1D turbulence model is also compared with the observations. Profiles of velocity, stratification, and dissipation rates generally show similar variations with depth as the observations, although the observed dissipation rates are somewhat larger than the modeled and the modeled transverse velocities are much larger than the observed. Subsequently, the model is used to investigate the variation of the entrainment parameter for a large range of Ekman and Froude numbers. Within the modeled parameter space, the entrainment parameter can be collapsed onto a curve that is an increasing function of both the Froude and the Ekman numbers. There is one puzzling result of the observations that differs from the model results and earlier observations: the observed entrainment rate increases dramatically during the observation period, where the Froude number decreases slightly. Some reasons for this increase are discussed. [ABSTRACT FROM AUTHOR]

Abstract: Direct numerical simulations (DNS) and model results from a number of one-point turbulence models are compared for homogeneous, stably stratified flows. Because of their wide spread use in numerical ocean modelling, only explicit algebraic second-moment models are investigated. Considered are two types of shear flows with either purely vertical or purely horizontal shear. The dissipation rate is evaluated from the observation that the shear-number becomes independent of stratification for low to moderate Richardson numbers as soon as the flow approaches self-similarity. For the cases with vertical shear, it is found that all statistical models essentially reproduced the DNS results, though with different accuracy. In contrast, only the most recent model was able to predict the salient features of horizontally sheared flows, i.e. a steady-state Richardson number that is about an order of magnitude larger and a vertical mixing efficiency that is about twice as large compared to the case with vertical shear. This model also reproduced other key parameters like the turbulent Froude number and the turbulent Prandtl number with good accuracy, but it failed to predict quantitatively the reduction of the shear anisotropy with increasing stratification. For strong stratification, none of the models was able to describe the rapid decrease of the mixing efficiency associated with the collapse and fossilisation of turbulence. [Copyright &y& Elsevier]

In frontal regions of the ocean, submesoscale motions are frequently observed features in the surface layer. Due to their important role for surface layer restratification, lateral dispersion, and the turbulent energy cascade, this type of motion has been extensively studied over the past decade. Various mixed-layer frontal instabilities, providing potential routes to energy dissipation, have been identified. However, direct turbulence measurements in submesoscale fronts, required to test the relevance of these new theoretical concepts, are so far largely missing. Here, data from a submesoscale upwelling filament (Benguela upwelling system) are presented that combine densely-spaced cross-front turbulence microstructure measurements with simultaneously conducted high-resolution velocity measurements from a towed research catamaran. These data reveal a narrow (width: 2-3 km) submesoscale front associated with an energetic frontal jet reaching speeds up to 1.2 m/s. Our data show a strongly turbulent surface mixing layer down to 30-40 m depth in the frontal region, driven by at least two distinct processes: (i) atmospheric forcing due to down-front winds and surface buoyancy loss on the warm side of the front; (ii) symmetric and inertial instabilities induced mixing in the cyclonic side of the frontal jet, consistent with the strong negative Ekman buoyancy flux in the frontal region. The two fronts bounding the submesoscale upwelling filament exhibited a marked asymmetry in mixing-layer depth and turbulence levels, likely resulting from the stabilizing or destabilizing Ekman transports on the two sides of the filament. Breaking internal waves associated with the collapse of the front were ubiquitous, suggesting an alternative pathway to energy dissipation in frontal regions. [ABSTRACT FROM AUTHOR]

Previous theoretical and numerical studies have shown that density fronts in the ocean surface layer are often amenable to inertial and symmetric instabilities. Such instabilities may induce a forward energy cascade, which is, according to numerical simulations, reflected in enhanced energy dissipation rates inside fronts. Field observations supporting this picture are, however, virtually lacking at the moment, mainly due to difficulties in obtaining combined stratification, shear, and mixing parameters at sufficient resolution across quickly evolving submesoscale features. Here, a recent data from a frontal region in the Baltic Sea will be presented, providing first direct evidence for enhanced energy dissipation inside a submesoscale mixed-layer front. Our measurements include repeated, densely-spaced cross-front turbulence microstructure transects and simultaneous high-resolution velocity measurements. These data reveal a narrow (width: 1-2 km) frontal region inside a 55 m thick surface layer, where the titled isopycnal structure of the front delineates a 20 m thick layer with strongly enhanced dissipation rates. Based on the observed background parameters, the possibility of different instability mechanisms (inertial, symmetric, and shear instability) will be discussed. It is found that the trapping of near-inertial waves inside the front provides an important energy source for frontal turbulence. This study supports the important role played by submesoscale motions as a route to energy dissipation of balanced larger-scale motions. [ABSTRACT FROM AUTHOR]