Search

The present study aimed to explore the neural-related mechanism of the creative evaluation process in individual with different levels of creativity. The time course of evaluation process for creative objects was monitored by event-related potentials (EPRs). Forty-five participants were divided into the high-creativity performance (HCP) group and the low-creativity performance (LCP) group and then completed a creative object evaluation task. The behavioral results revealed that the HCP group showed higher accuracy rates on the creative object evaluation task than the LCP group did. The ERPs analysis demonstrated that in the early stage of creative object processing, ordinary objects elicited a more negative anterior N2 at 190-340 ms than the creative objects did in the LCP group. In the late stage of creative object processing, creative objects elicited a more positive ERPs deflection in the HCP group than in the LCP group at 350-500 ms and at 500-1000 ms. Taken together, these results indicate that different creativity performance individuals may express different attention patterns or top-down processing strategy in the early stage of creative object evaluation processing; and high-creativity performance individuals can better utilize both cognitive and non-cognitive evaluation processing in the late stage, to process the creative object effectively.

An efficient method for the synthesis of indolo[2,1-a]isoquinolines using calcium carbide as an alkyne source, 2-(2-bromophenyl)-1H-indoles as starting materials, and copper as a catalyst is described. The target products are synthesized via Sonogashira cross-coupling/nucleophilic addition tandem reactions. The advantages of this protocol include the use of inexpensive and easy-to-handle solid alkyne source instead of flammable and explosive gaseous acetylene, cheap and readily available raw materials, wide range of substrates, and simple reaction procedure. The method can also be extended to gram scale. In addition, the desired product can also be obtained by one-pot three-component reaction of phenylhydrazine hydrochlorides, o-bromoacetophenones and calcium carbide. [ABSTRACT FROM AUTHOR]

In order to investigate the influence of the deflector layout on the performance of mine-used main fan diffuser, the RNG k-ε turbulence model was applied to numerical simulation of the internal flow fields under three inlet velocity conditions with and without deflector. The influence of the central angle and starting angle of the deflector on the performance of the diffuser was investigated. The results show that for the diffuser without deflector, a serious flow accumulation phenomenon exists inside the flow field, which restricts the performance improvement of the diffuser; when the center angle of the deflector is small, the larger the starting angle of its installation is, the higher the diffusion efficiency of the diffuser under the three inlet velocities considered, however the secondary flow due to the uneven pressure on the upper and lower sides of the deflector head appears at some starting angles, which results in an increase in flow losses. As the center angle of the deflector increases, the flow accumulation inside the diffuser improves gradually, and the secondary flow also gradually weakens. When the center angle reaches 60°, the diffusion efficiency is the highest.

This paper presents a low-distortion and low-power multi-stage noise-shaping (MASH) architecture Sigma-Delta (Σ Δ) modulator with double-sampling. The modulator uses a cascade of integrator feed-forward (CIFF) structure as a cascaded modulator in a MASH architecture. Since the CIFF structure provides a feedforward path from the input signal to the quantizer, the input signal is directly transmitted to the output without loop processing, relaxing the linearity requirement of the modulator, reducing performance requirements for the OTA and harmonic distortion. Double-sampling technique is adopted in the first integrator to double the sampling rate, improving the accuracy of the modulator without the increase of power consumption. In order to eliminate the influence of capacitor mismatch in the sampling network, a fully floating differential switched capacitor (SC) feedback digital-to-analog (DAC) is used in the integrator. The simulation results show that the Σ Δ modulator achieves 113 dB signal-to-noise and distortion ratio (SNDR) and the power consumption is 3.15 mW from a 5 V power supply. [ABSTRACT FROM AUTHOR]

Micro/mini‐light emitting diode (LED) arrays are regarded as the most promising next generation of display devices. However, the inherent Lambertian radiation of LED chips results in a significant pixel crosstalk. To improve the display quality, high‐quality micro/mini‐LED display pixels with fully enclosed composite micro/nano‐packages and in situ nanoimprint technology are proposed and demonstrated in this work. The nanoimprint template is designed as a composite structure comprising an intermediate sandwich cavity array and thin‐bottom nanostructure layer. Contact is maintained between the template and LED chips array substrate. By vacuuming the sealed sandwich cavities, the thin‐bottom nanostructure layer is deformed to drive the upward protrusion of the liquid optical polymer. Moreover, the nanocavities on the thin nanostructure layer are fully filled by the polymer, forming a composite micro/nano‐package. The characteristics of the composite micro/nano‐package, such as the aperture and protrusion height, can be flexibly adjusted by changing the template structure or process parameters. A 6 × 8 array LED chips display device enclosed by a composite micro/nanopackage is developed. The divergence angle of the single LED chip decreases to 72° from the original 138°, the light‐extraction efficiency increases18.4%, and the luminescence spectrum and current‐voltage characteristics changes only minimally. [ABSTRACT FROM AUTHOR]