Search

Lead-based reactor nuclear power has the advantages of inherent safety, compact size, light weight, long service life, and high efficiency, and it is widely applied to advanced marine equipment, unmanned underwater vehicles, and deep-sea space stations for energy and power purposes. Conducting research on lead-based reactor marine nuclear power is key to the technological innovation of energy and power for marine equipment in China. This study clarifies the application scenarios and development demands of marine nuclear power, summarizes the development status of lead-based reactor nuclear power from the aspects of technical characteristics, representative applications, and research status, and analyzes corresponding key technologies including nuclear fuel and cladding materials, key components in the primary loop, coolant processes and oxygen control, and advanced power generation technologies. Moreover, the study explores the development challenges for lead-based reactor marine nuclear power and proposes there feasible technical routes: low-temperature lead-based reactor marine nuclear power, high-temperature and high-efficiency lead-based reactor marine nuclear power, and integrated natural-circulation lead-based reactor marine nuclear power. Furthermore, we propose the following suggestions to promote the leapfrog development of marine nuclear power in China:(1) strengthening research and development (R&D) of specialized technologies for the lead-based reactor marine nuclear power and accelerating the deployment of demonstrative projects; (2) incorporating lead-based reactors into the country's major energy strategies and creating a standards system; (3) establishing national joint R&D centers and creating new models for technological innovation and industrial development.

Lead-cooled fast reactors have multilayered designs and large internal temperature differences, which cause challenges in simulating reactor physics. SuperMC, a large-scale integrated software system for neutronics design, is inherently able to address complex geometries and multi-temperature problems. The purpose of this study is to verify the applicability of SuperMC to the lead-bismuth-cooled fast reactor RBEC-M. The multi-temperature cross-section generation function of SuperMC was employed and showed good performance. Based on the ENDF/B-VII.1 library, the effective multiplication factor keff obtained by SuperMC showed good agreement with those from previous works. The relationship of keff and 15N enrichment applied to the fuel material was also studied, with the results showing that in creased 15N could significantly improve keff. The axial power profile and kinetics parameters for the bench mark were then calculated and analyzed. This work thus verified the applicability of SuperMC for comprehensive neutronics simulations for lead-bismuth-cooled fast reactors.

For validating the current evaluated neutron data libraries, neutron leakage spectra from lead and lead bismuth eutectic (LBE) cylinders have been measured using an intense D-T pulsed neutron source with time-of-flight (TOF) method by Institute of Nuclear Energy Safety Technology (INEST), Chinese Academy of Sciences (CAS). The measured leakage spectra have been compared with the calculated ones using Super Monte Carlo Simulation Program for Nuclear and Radiation Process (SuperMC) with the evaluated pointwise data of lead and bismuth processed from ENDF/B-VII.1, JEFF-3.1 and JENDL-4.0 libraries. This work shows that calculations of the three libraries are all generally consistent with the lead experimental result. For LBE experiment, the JEFF-3.1 and JENDL-4.0 calculations both agree well with the measurement. However, the result of ENDF/B-VII.1 fails to fit with the measured data, especially in the energy range of 5.5 and 7 MeV with difference more than 80%. Through sensitivity analysis with partial cross sections of 209Bi in ENDF/B-VII.1 and JEFF, the difference between the measurement and the ENDF/B-VII.1 calculation in LBE experiment is found due to the neutron data of 209Bi.

A high intensity D-T fusion neutron generator (HINEG) is keenly needed for the research and development (R&D) of nuclear technology and safety of the advanced nuclear energy system, especially for the radiation protection and shielding. The R&D of HINEG includes two phases: HINEG-I and HINEG-II. HINEG-I is designed to have both the steady beam and pulsed beam. The neutron yield of the steady beam is up to 1012 n/s. The width of pulse neutron beam is less than 1.5 ns. HINEG-I is used for the basic neutronics study, such as measurement of nuclear data, validation of neutronics methods and software, validation of radiation protection and so on. HINEG-II aims to generate a high neutron yield of 1013 n/s neutrons by adopting high speed rotating tritium target system integrated with jet/spray array enhanced cooling techniques, and can further upgrade to obtain neutron yield of 1014~1015n/s by using of accelerators-array in a later stage. HINEG-II can be used for fundamentals research of nuclear technology including mechanism of materials radiation damage and neutronics performance of components, radiation shielding as well as other nuclear technology applications.