Search

Antimony（Sb） has high theoretical specific capacity and moderate reaction potential, but poor cycling stability and rate performance caused by large volume expansion and sluggish reaction kinetics limit its development in alkali‐ion batteries. The construction of carbon/Sb composites can solve this problem, but the traditional single carbon composite and poor Sb/carbon interface have limited promotion. Here, under the guidance of theoretical calculations, a strategy of hierarchical double carbon composite is proposed to enhance the performance of Sb anode, and systematically reveal the lithium/sodium ions (Li+/Na+) storage mechanism of Sb in complex composite system. Sb nanoparticles (Sb NPs) are encapsulated in carbon sphere matrix with strong interfacial chemical bond to form the first level composite material, and then the highly conductive and mechanically strong graphene is used as a three‐dimensional skeleton network to connect the first level composite to form the second level composite material. The hierarchical double carbon/Sb composite exhibits excellent rate (228 mAh g−1 @ 20 A g−1) and long cycling performance (373.7 mAh g−1 @ 2 A g−1 after 2200 cycles, capacity retention of 93.1%). This work may expand structural design and interface regulation of Sb/C composites and providing theoretical guidance for metal anodes development. [ABSTRACT FROM AUTHOR]

Designing Sb/carbon composite is an effective strategy to enhance the cycle stability and rate capability of Sb anodes for sodium ion batteries. However, the introduction of carbon often leads to a loss in specific capacity and initial Coulombic efficiency (ICE). In this work, a new perspective is adopted by focusing on improving the "sloping capacity" contribution of carbon (C) in Sb/C composites, rather than solely increasing the platform capacity of Sb as traditionally done. Theoretical predictions indicate that constructing Sb/C composites with high Sb and carbon interfacial areas can provide more Na adsorption sites, thus enhancing the "sloping capacity" of amorphous carbon. Guided by DFT, a rational Sb/C/NSCDs‐2(N) is successfully developed by self‐embedding Sb nanodots into 2D‐amorphous carbon sheets doped with N/S. Sb/C/NSCDs‐2(N) exhibits abundant Sb/carbon interfacial areas and excellent nanoscale effects, demonstrating ideal electrochemical sodium storage performances. Impressively, the Sb/C/NSCDs‐2(N) provides a "sloping capacity" close to 160 mAh g−1. Significantly, owing to the fact that these interfaces and defects are not in direct contact with the electrolyte, the side reaction of electrolyte is effectively inhibited, leading to no decrease of ICE. [ABSTRACT FROM AUTHOR]

Bi-doped carbon dots (Bi-CDs) with rich polar groups and good compatibility were employed as co-deposition electrolyte additives to homogenize Li+ flux for dendrite-free Li deposition. High coulombic efficiency (99.0%) and long-term stability (800 h) with reduced overpotential (∼15 mV) were achieved after introducing Bi-CDs in conventional electrolyte for high-performance Li–S batteries. [ABSTRACT FROM AUTHOR]

Carbon dots (CDs) are considered as excellent structural regulator for metal oxides (MOs) due to their abundant functional groups, superior dispersibility, and ultrasmall size (<10 nm). Herein, a new approach is proposed to construct porous pomegranate‐like MOs/CDs composite based on the CDs‐induced in situ growth mechanism of ion adsorption–multipoint surface nucleation–crosslinking agglomeration. The proposed methodology is successfully applied to prepare SnO2/CDs, Cu2O/CDs, and Fe2O3/CDs composites, respectively, demonstrating its universality to metal oxides. Taking SnO2/CDs composite as a case study for anode material in lithium‐ion batteries, it exhibits high lithium storage capacity, excellent cycling stability, and a special feature of capacity increase upon cycling. This study provides a new idea for the design of metal oxides materials tuned by CDs and broadens the application of CDs in the field of material synthesis. [ABSTRACT FROM AUTHOR]

Among the solid electrolytes for solid‐state Li batteries, polymer electrolytes are actively explored on the basis of the good interfacial contact and easy making, while it is still constrained by slow ionic transport and low lithium ion transference number. Herein, functional carbon dots‐based Li+ conductor (CD‐Li) is designed to improve the dynamics and selectivity of Li+ transport in polyethylene oxide (PEO) electrolyte. High ionic conductivity (1.0 × 10−4 S/cm, 25 °C) and Li+ transference number (0.60) were successfully achieved within the CD‐Li‐based PEO composite electrolyte, which could be attributed to the enhanced chain movement and the limited motion of anion. Moreover, the characteristics of big volume of individual anions of CD‐Li can provide more free Li+. As well, benefiting from the existence of F atom in the CD‐Li, in‐situ constructed LiF‐containing interfacial layer is in favor of maintaining the interface stability and facilitating the rapid transmission of Li ions. The composite electrolyte with CD‐Li can address the ionic conductivity issues accompanied with strengthening the interfacial stability. The distinctive composite electrolyte realizes the stable cycle performance for Li/LiFePO4 and Li/LiNi0.5Co0.2Mn0.3O2 batteries. The exploration of multifunctional carbon dot fillers provides new ideas for the efficient development of composite electrolytes. [ABSTRACT FROM AUTHOR]

Antimony (Sb) is considered a promising anode material for sodium‐ion batteries due to its high specific capacity and moderate working potential. However, the non‐negligible volume variation leads to the rapid decay of capacity, which hinders the practical application of Sb anode materials. Here, an economical and scalable route with high yield is proposed to obtain Sb ultrafine nanocrystals embedded in a porous carbon skeleton. Notably, the synergetic effect of the heterogeneous structure is maximized by inducing the interfacial coupling SbOC and creating buffering space for the volume effect of Sb. The high‐entropy phase interface creates the doping site breaking the periodicity of atoms and alters the electronic structure, also bridging the slip of intergranular defects. Thus, the electronic conductivity and phase interface structural stability are reinforced. The mechanism of accelerating electron migration at the heterogeneous phase interface is visualized through the density functional theory method, and the mass/charge‐transfer kinetics is analyzed via the calculation of surface‐induced capacitive contribution. [ABSTRACT FROM AUTHOR]

Antimony-based materials represent promising anode materials for sodium ion batteries (SIBs) owing to their high theoretical capacity, however, the large volume expansion and low ionic conductivity during the electrochemical process prohibit them from reaching their theoretical expectations. In this work, Sb 2 S 3 @C and Sb 2 Se 3 @C nanodots with uniform diameters of 19.0 nm and 20.7 nm were synthesized by H 2 /C thermal reduction and co-sulfurization (selenization) of sodium stibogluconate. Each Sb 2 S 3 and Sb 2 Se 3 nanodot was coated by an interconnecting carbon network with weak graphitization, which further crosslinked together to form a high conductive framework. When applied as anode for SIBs, they exhibited desired sodium storage properties, especially the excellent cycling stability of Sb 2 Se 3 @C nanodots with a reversible capacity of 316.1 mA h g−1 after 100 cycles at 100 mA g−1 and 269.1 mA h g−1 after 200 cycles at 1 A g−1, which was consistent with the calculated result of theoretical volume changes (264% and 246%) and density functional theory (DFT) calculation for both materials during the Na+ intercalation processes, as expected. [Display omitted] • Sb 2 S 3 (Sb 2 S 3) nanodots/C composites have been successfully fabricated. • The volume changes of two materials during the Na+ insertion/deintercalation process have been calculated and analyzed in details. • The satisfactory sodium storage properties are achieved, which is consistent with the result of theoretical calculation. [ABSTRACT FROM AUTHOR]