Search

The microwave-to-plasma energy conversion efficiency and the ease of plasma self-ignition are critical factors affecting the applications for microwave plasma sources (MPSs). This study presents a novel MPS utilizing dielectric wedges for self-ignition and improved energy conversion. Firstly, we crafted a dielectric wedge with a gradient refractive index, guiding the electric field from air to dielectric materials and facilitating microwave propagation along the dielectric in a waveguide. Through electromagnetic simulation, we explored how the size and permittivity of the dielectric wedge affect the electric field distribution. Then, the MPS based on the dielectric wedge was designed. In this configuration, a dielectric tube encloses the discharge tube, connecting to dielectric wedges to guide electromagnetic waves to the plasma. We analyzed the MPS performance using the Drude model, evaluating microwave energy conversion efficiency across various electron densities and collision frequencies. The results were compared with a commonly used MPS based on a tapered waveguide, demonstrating the proposed MPS has wider applicability across different operation conditions. Finally, experiments under low pressures were conducted using various gases, showing an average energy conversion efficiency of approximately 40% higher than the tapered waveguide MPS. The experiments also indicate the proposed MPS has a greater capability of self-ignition at lower power levels. These findings highlight the efficacy of incorporating dielectric wedges to enhance MPS performance, making it conducive for broader industrial applications. [ABSTRACT FROM AUTHOR]

Continuous-flow microwave heating stands out for its ability to rapidly and uniformly heat substances, making it widely applicable in chemical production. However, in practical applications, the permittivity of the heated liquid changes dramatically as the reaction progresses, affecting the efficiency and uniformity of continuous-flow heating. Herein, this work presents a novel microwave heating device based on a coaxial structure for high-performance heating. Our approach commenced with the development of a multiphysical field model, incorporating spiraled polytetrafluoroethylene (PTFE) as a water channel and the coaxial waveguide as a container. The analysis shows that the uniform distribution of the sectional electric field of electromagnetic waves in the TEM mode within the coaxial structure can enhance heating uniformity. Then, a continuous-flow microwave heating system for different liquid loads was established, and experimental measurements were conducted. The heating efficiency for all loads exceeded 90%, which basely matched the simulation results, validating the accuracy of the model. Finally, the heating efficiency and uniformity under different permittivity loads were analyzed, as well as the impact of channel radius on heating efficiency. The device exhibits high heating efficiency under different loads, with uniform radial electric field distribution and stable heating uniformity. This continuous-flow microwave device is suitable for chemical research and production because of its high adaptability to the large dynamic range of permittivity, contributing to the promotion of microwave energy applications in the chemical industry. [ABSTRACT FROM AUTHOR]

Microwave continuous-flow heating has been proven to reduce the time of chemical reaction, increase the conversion rate, and improve product purity effectively. However, there are still problems such as relatively low heating efficiency, unideal heating homogeneity, and poor compactness, which brings further drawbacks like difficulty in fabrication and integration. In this study, a compact microwave continuous-flow heater based on six fractal antennas is proposed to address the problems above. First, a multi-physics simulation model is built, while heating efficiency and the volumetric coefficient of variance (COV) are improved through adjusting the geometric structure of this heater and the phase assignment of each radiator. Second, an experiment is conducted to verify the simulation model, which is consistent with the simulation. Third, a method of fast varying phases to achieve greater heating efficiency and heating homogeneity is adopted. The results show that the single-phase radiator improved efficiency by 31.1%, and COV was significantly optimized, reaching 64%. Furthermore, 0–100% ethanol–water solutions are processed by the heater, demonstrating its strong adaptability of vastly changing relative permittivity of liquid load. Moreover, an advance of this microwave continuous-flow heater is observed, compared with conventional multi-mode resonant cavity. Last, the performance of this microwave continuous-flow heater as the chemical reactor for biodiesel production is simulated. This design enables massive chemical production in fields like food industry and biodiesel production, with enhanced compactness, heating efficiency, and heating homogeneity. [ABSTRACT FROM AUTHOR]

This paper proposes a high-sensitivity microstrip differential sensor for measuring the complex permittivity of liquids. The prototype of the differential sensor was formed by cascading two LC resonators on a microstrip transmission line based on stepped impedance. A strong electric field was found to be distributed in the circular patch of the LC resonator; therefore, a cylindrical micropore was set in the center of the circular LC resonator to measure the dielectric sample, which maximized the disturbance of the dielectric sample on the sensor. By optimizing the size of the circular LC resonator, a high-sensitivity sensor circuit was designed and manufactured. The complex permittivity of the test sample was calculated by measuring the transmission coefficient of different molar concentrations of ethanol–water solutions. The experimental results show that the designed differential sensor can accurately measure the complex permittivity of liquid materials with an average sensitivity of 0.76%. [ABSTRACT FROM AUTHOR]

Traditional microwave heating faces challenges such as low efficiency and uneven heating, hindering its industrial application. Sweep frequency microwave heating is an effective way to improve uniformity. Larger cavity sizes result in better heating uniformity due to the generation of more resonant modes. However, in industrial applications, large cavities occupy significant space, making them less flexible and limiting their usability. This paper introduces a method to enhance sweep frequency microwave heating uniformity by adding a dielectric substance to cavity walls. First, the impact of increasing cavity size on the uniformity of sweep frequency microwave heating was studied, with the theoretical analysis showing that filling the cavity with dielectric materials can be equivalent to enlarging the cavity size. Subsequently, a multiphysics simulation model for sweep frequency microwave heating was established to analyze the effects of dielectric substance thickness and permittivity on heating uniformity. A high-efficiency, high-uniformity microwave multimode cavity was designed, and the accuracy of the simulation model was validated through experiments. Finally, the effects of sweep frequency range and load variations on the heating performance were analyzed. This method effectively addresses the uniformity issues in industrial microwave heating and aids in promoting the application of microwave energy in industry. [ABSTRACT FROM AUTHOR]

Present radio frequency (RF) rectifiers usually suffer from poor power conversion efficiency (PCE) at low-resistance loads, and the currently proposed DC-DC converter cannot solve this problem well. Aiming at this above problem, we propose a novel DC-DC converter for rectifiers, which consists of a Boost–Buck circuit and a Buck circuit cascaded together to maintain high PCE at both high and low load resistance; the converter can also operate over a wide range of input powers. The proposed converter, along with a 2.45 GHz rectifier, was fabricated to verify its performance. With the converter, the load range of the rectifier when the overall PCE is over 50% was extended from 250 Ω–1250 Ω to 5 Ω–3000 Ω. The highest overall PCE reached up to 61% and the overall PCE at a small load of 5 Ω increased from 1.1% to 54%. The proposed converter can be used in wireless power transmission (WPT). [ABSTRACT FROM AUTHOR]

Microwave plasma jets have garnered significant attention due to their unique advantages and wide applications in numerous fields. However, the frequent collisions between electrons and neutral particles at atmospheric pressure make it challenging to generate a room-temperature plasma jet and maintain a high energy efficiency at the same time. This paper introduces a new microwave plasma jet based on a rectangular waveguide, which utilizes the surface wave propagating along the plasma jet to sustain the gas discharge. It features a simple structure, low power consumption, high energy efficiency, and strong controllability without the need for any external tuning measures. The minimum power required to ignite and stably maintain the plasma jet at atmospheric pressure is as low as 25 W and the measured lowest gas temperature at the plasma jet tail is approximately 295 K. Meanwhile, experiments show the microwave energy efficiency can be higher than 90% in a large range of input powers and gas inflow rates, while the gas temperature is maintained close to room temperature. These characteristics of our proposed surface wave plasma jet demonstrate tremendous potential in fields such as hemostasis, sterilization, wastewater treatment, semiconductor cleaning, and material processing. [ABSTRACT FROM AUTHOR]

Microwave radiation has become an effective catalytic combustion method, especially in the degradation of volatile organic compounds (VOCs) such as toluene using catalysts like MnO2. In this study, a spine waveguide microwave reactor was designed to investigate the influence of different microwave processing conditions on the degradation of toluene catalyzed by MnO2. An experimental system for microwave-assisted catalytic degradation of toluene was established to explore the relationship between microwave power, catalyst conductivity, and toluene degradation rate. The results showed that the efficiency of MnO2 catalyzing toluene degradation had a nonlinear relationship with microwave power, first increasing to a peak and then decreasing. Additionally, the experiment found that the degradation rate of toluene was positively correlated with the conductivity of MnO2. Subsequent characterization analyses using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) further verified the changes in the microstructure and properties of MnO2 under microwave heating. The characterization results showed that with the increase in microwave power, the relative content of Mn3+ on the surface of MnO2 increased, and the relative content of adsorbed oxygen also increased accordingly. At a microwave power of 100 W, the treated MnO2 displayed the optimal ratio of manganese oxidation state and oxide, both close to 1:1, which was more conducive to the degradation of toluene. Based on these findings, this study hypothesized that the microwave-enhanced catalytic degradation of toluene by MnO2 may be attributed to changes in the surface electron transfer kinetics of MnO2, providing new insights into the field of microwave-enhanced catalysis. [ABSTRACT FROM AUTHOR]