Search

Introduction The assessment of the risk of virus transmission through papers, such as postcards, is important. However, the stability of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and influenza A virus (IAV) on different types of papers is currently unknown. Investigation of the survival time of these viruses on different types of papers will provide insights into their risk of long-distance transport by postal items. Methods We evaluated the stability of SARS-CoV-2 and IAV, mixed with a culture medium, on the surface of postcards with various coatings, including plain paper (PP), inkjet paper (IP), and inkjet photo paper (IPP). The surface structure of each paper was microscopically assessed. Results The surface structures of PP, IP, and IPP varied greatly depending on the presence or absence, and type, of coat layer, regardless of the base material. IP and IPP surfaces were less conducive to virus survival than PP surfaces, because of the difference in surface shapes. The survival times of SARS-CoV-2 on each paper were approximately 59.8 (PP), 6.5 (IP), and 9.8 h (IPP), and significantly longer than those of IAV (10.3, 1.8, and 3.3 h, respectively). Conclusions The risk of SARS-CoV-2 transmission via paper, such as postcards, is significantly higher than that of IAV transmission. While PP, IP, and IPP have the same base material, their surface structures differ, which affects viral stability. The IP and IPP surfaces are less suitable for virus survival. This study provides novel insights into the risks of viral transmission via paper.

Objective The aim of the study was to evaluate the ionizing radiation exposure in patients with Coronavirus disease 2019 (COVID-19). Materials and Methods This was a retrospective study in which all patients presented with suggestive symptoms of COVID-19 were included. The study was carried out in a university-affiliated private hospital in Istanbul, Turkey. Biological radiation dose exposure (cumulative effective dose: CED) was evaluated in millisievert (mSv) units. Results A total of 1410 patients were included in the study. Of all study subjects, 804 patients (57%) underwent only one chest computed tomography (CT) procedure. Six hundred and six patients (43%) had two or more chest CT procedures. Median CED was 6.02 (min–max:1.67–16.27) mSv. The number of patients who were exposed to ≤ 5 mSv were 149 (24.6%), whereas 457 patients (75.4%) were exposed to >5 mSv. Conclusion The radiation exposure in COVID-19 patients seems unjustifiably high. Awareness should be increased as to the proper use of chest CT in COVID-19 as per to the society recommendations.

BackgroundThere is currently major concern about the impact of the global COVID-19 outbreak on mental health. But it remains unclear how individual behaviours could exacerbate or protect against adverse changes in mental health.AimsTo examine the associations between specific activities (or time use) and mental health and well-being among people during the COVID-19 pandemic.MethodData were from the UCL COVID-19 Social Study, a panel study collecting data weekly during the COVID-19 pandemic. The analytical sample consisted of 55 204 adults living in the UK who were followed up for the 11-week strict lockdown period from 21 March to 31 May 2020. Data were analysed using fixed-effects and Arellano–Bond models.ResultsChanges in time spent on a range of activities were associated with changes in mental health and well-being. After controlling for bidirectionality, behaviours involving outdoor activities such as gardening and exercising predicted subsequent improvements in mental health and well-being, whereas increased time spent following news about COVID-19 predicted declines in mental health and well-being.ConclusionsThese results are relevant to the formulation of guidance for people obliged to spend extended periods in isolation during health emergencies and may help the public to maintain well-being during future lockdowns and pandemics.

The highly contagious nature of SARS-CoV-2 has led to several studies on the transmission of the virus. A little studied potential fomite of great concern in the community is currency, which has been shown to harbor microbial pathogens in several studies. Since the onset of the COVID-19 pandemic, many businesses in the United States have limited the use of banknotes in favor of credit cards. However, SARS-CoV-2 has shown greater stability on plastic in several studies. Herein, the stability of SARS-CoV-2 at room temperature on banknotes, money cards and coins was investigated. In vitro studies with live virus suggested SARS-CoV-2 was highly unstable on banknotes, showing an initial rapid reduction in viable virus and no viral detection by 24 hours. In contrast, SARS-CoV-2 displayed increased stability on money cards with live virus detected after 48 hours. Environmental swabbing of currency and money cards on and near the campus of Brigham Young University supported these results, with no detection of SARS-CoV-2 RNA on banknotes, and a low level on money cards. However, no viable virus was detected on either. These preliminary results suggest that the use of money cards over banknotes in order to slow the spread of this virus may be ill-advised. These findings should be investigated further through larger environmental studies involving more locations.

This research has developed a method for rapid detection of SARS-CoV-2 N protein on a paper-based microfluidic chip. The chitosan-glutaraldehyde cross-linking method is used to fix the coated antibody, and the sandwich enzyme-linked immunosorbent method is used to achieve the specific detection of the target antigen. The system studied the influence of coating antibody concentration and enzyme-labeled antibody concentration on target antigen detection. According to the average gray value measured under different N protein concentrations, the standard curve of the method was established and the sensitivity was tested, and its linear regression was obtained. The equation is y = 9.8286x+137.6, R2 = 0.9772 > 0.90, which shows a high degree of fit. When the concentration of coating antibody and enzyme-labeled antibody were 1 μg/mL and 2 μg/mL, P > 0.05, the difference was not statistically significant, so the lower concentration of 1 μg/mL was chosen as the coating antibody concentration. The results show that the minimum concentration of N protein that can be detected by this method is 8 μg/mL, and the minimum concentration of coating antibody and enzyme-labeled antibody is 1 μg/mL, which has the characteristics of high sensitivity and good repeatability.

BackgroundClozapine, an antipsychotic with unique efficacy in treatment-resistant psychosis, is associated with increased susceptibility to infection, including pneumonia.AimsTo investigate associations between clozapine treatment and increased risk of COVID-19 infection in patients with schizophrenia-spectrum disorders who are receiving antipsychotic medications in a geographically defined population in London, UK.MethodUsing information from South London and Maudsley NHS Foundation Trust (SLAM) clinical records, via the Clinical Record Interactive Search system, we identified 6309 individuals who had an ICD-10 diagnosis of schizophrenia-spectrum disorders and were taking antipsychotics at the time of the COVID-19 pandemic onset in the UK. People who were on clozapine treatment were compared with those on any other antipsychotic treatment for risk of contracting COVID-19 between 1 March and 18 May 2020. We tested associations between clozapine treatment and COVID-19 infection, adjusting for gender, age, ethnicity, body mass index (BMI), smoking status and SLAM service use.ResultsOf 6309 participants, 102 tested positive for COVID-19. Individuals who were on clozapine had increased risk of COVID-19 infection compared with those who were on other antipsychotic medication (unadjusted hazard ratio HR = 2.62, 95% CI 1.73–3.96), which was attenuated after adjusting for potential confounders, including clinical contact (adjusted HR = 1.76, 95% CI 1.14–2.72).ConclusionsThese findings provide support for the hypothesis that clozapine treatment is associated with an increased risk of COVID-19 infection. Further research will be needed in other samples to confirm this association. Potential clinical implications are discussed.

This work reports the development of a rapid, simple and inexpensive colorimetric paper-based assay for the detection of the severe acute respiratory symptom coronavirus 2 (SARS-CoV-2) humanized antibody. The paper device was prepared with lamination for easy sample handling and coated with the recombinant SARS-CoV-2 nucleocapsid antigen. This assay employed a colorimetric reaction, which is followed by horseradish peroxidase (HRP) conjugated detecting antibody in the presence of the 3,3',5,5'-tetramethylbenzidine (TMB) substrate. The colorimetric readout was evaluated and quantified for specificity and sensitivity. The characterization of this assay includes determining the linear regression curve, the limit of detection (LOD), the repeatability, and testing complex biological samples. We found that the LOD of the assay was 9.00 ng μL-1 (0.112 IU mL-1). The relative standard deviation was approximately 10% for a sample number of n = 3. We believe that our proof-of-concept assay has the potential to be developed for clinical screening of the SARS-CoV-2 humanized antibody as a tool to confirm infected active cases or to confirm SARS-CoV-2 immune cases during the process of vaccine development.

This study intends to evaluate the different lung CT scan protocols used for the diagnostic evaluation of COVID-19-induced lung disease in Iranian imaging centers in terms of radiation dose and image quality. After data collecting, subjective image quality, radiation dose and objective image quality such as noise, SNR and CNR were assessed. Statistically significant differences in effective dose and image quality were evident among different lung CT protocols. Lowest and highest effective dose was1.31 ± 0.53 mSv related to a protocol with activated AEC (reference mAs = 20) and 6.15 ± 0.57 mSv related to a protocol with Fixed mAs (mAs = 100), respectively. A protocol with enabled tube current modulation with 70 mAs as a reference mAs, and protocol with 20 mAs and enabled AEC had the best and lowest image quality, respectively. To optimize the scan parameters, AEC must be used, and a range of tube currents (between 20 and 50 mAs) can produce acceptable images in terms of diagnostic quality and radiation dose for the diagnosis of COVID-19-induced lung disease.

Computed tomography (CT) provides useful information in patients with known or suspected COVID-19 infection. However, there are substantial variations and challenges in scanner technologies and scan practices that have negative effect on the image quality and can increase radiation dose associated with CT. Objective: In this article, we present major issues and challenges with use of CT at five Brazilian CT facilities for imaging patients with known or suspected COVID-19 infection and offer specific mitigating strategies. Methods: Observational, retrospective and prospective study of five CT facilities from different states and regions of Brazil, with approval of research and ethics committees. Results: The most important issues include frequent use of CT, lack of up-to-date and efficient scanner technologies, over-scanning and patient off-centring. Mitigating strategies can include updating scanner technology and improving scan practices.

This report provides perspectives concerning dual roles of serum ferritin as a measure of both iron status and of inflammation. We suggest benefits of a lower range of serum ferritin as has occurred for total serum cholesterol and fasting blood glucose levels. Observations during a prospective randomized study using phlebotomy in patients with peripheral arterial disease (PAD) offered unique insights into dual roles of serum ferritin both as an iron status marker and acute phase reactant. Robust positive associations between serum ferritin, interleukin 6 [IL-6], tissue necrosis factor-alpha (TNF-a), and high sensitivity C-reactive protein (hsCRP) were discovered. Elevated serum ferritin and IL-6 levels associated with increased mortality and with reduced mortality at ferritin levels < 100 ng/mL. Epidemiologic studies demonstrate similar outcomes. Extremely elevated ferritin and IL-6 levels also occur in individuals with high mortality due to SARS-CoV-2 infection. Disordered iron metabolism reflected by a high range of serum ferritin level signals disease severity and outcomes. Based upon experimental and epidemiologic data, we suggest testing the hypotheses that optimal ferritin levels for cardiovascular mortality reduction range from 20—100 ng/mL with % transferrin levels from 20–50%, to ensure adequate iron status and that ferritin levels above 194 ng/mL associate with all-cause mortality in population cohorts., Graphical Abstract Graphical Abstract

COVID-19 is a highly diffuse respiratory infection caused by severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2). Currently, quantitative real-time polymerase chain reaction (qRT-PCR) technology is commonly used in clinical diagnosis of COVID-19. However, this method is time-consuming and labor-intensive, which is limited in clinical application. Here, we propose a new method for the ultrasensitive and visual detection of SARS-CoV-2 viral nucleic acid. The assay integrates with a paper device and highly efficient isothermal amplification technology - Netlike rolling circle amplification (NRCA), which can reach a limit of detection of 4.12 aM. The paper-based NRCA owns advantages of specificity, portability, visualization and low-cost. Therefore, this method can effectively meet the requirements of point-of-care testing, providing a novel molecular detection technology for clinical diagnosis of COVID-19 and promoting the development of NRCA devices., Graphical Abstract ga1

This review summarizes the state of the art of paper-based biosensors (PBBs) for coronavirus disease 2019 (COVID-19) detection. Three categories of PBB are currently being been used for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) diagnostics, namely for viral gene, viral antigen and antibody detection. The characteristics, the analytical performance, the advantages and drawbacks of each type of biosensor are highlighted and compared with traditional methods. It is hoped that this review will be useful for scientists for the development of novel PBB platforms with enhanced performance for helping to contain the COVID-19 outbreak, by allowing early diagnosis at the point of care (POC).

Significance: The need for regulatory review of infrared thermographs (IRTs) used on humans was removed in response to the unique circumstances of the SARS-CoV-2 pandemic (a.k.a., COVID-19). The market for these devices has since expanded considerably. This evaluation of IRT performance may have significant implications for febrility screening worldwide. Aim: Perform controlled nonhuman trials of IRT devices to identify and quantify deviations in the human temperature range. Approach: We compared IRT readings of a temperature-controlled non-human subject with one FDA-cleared IRT and one FDA-cleared handheld NCIT. In individual trials for each device, the subject was measured between 35°C and 40°C at 0.25°C increments. Results: The IRT device measurements were consistently normalized around the human mean (∼37°C). Temperatures were decremented as they approached the febrile range, and systematically reported as normal across all seven devices. This effect does not appear to be explained by a fixed offset or any known approach to estimating body temperature, or by random error. Conclusion: The IRTs in this study generated human temperature measurements that were systematically biased to the mean human temperature. Given that these devices are utilized for sentinel detection of possible infectious disease transmission, and are now globally employed, the implications for reduced detection of febrility are a widespread false sense of security. This vulnerability must be considered with respect to facility access control, clinical applications, and travel screening in the context of the ongoing COVID-19 pandemic response.

Coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is emerging as a global pandemic outbreak. To date, approximately one million deaths and over 32 million cases have been reported. This ongoing pandemic urgently requires an accurate testing device that can be used in the field in a fast manner. Serological assays to detect antibodies have been proven to be a great complement to the standard method of reverse transcription-polymerase chain reaction (RT-PCR), particularly after the second week of infection. We have developed a specific and sensitive immunosensor for immunoglobulin detection produced against SARS-CoV-2. Unlike other lateral flow-based assays (LFAs) involving the utilization of multiple antibodies, we have reported a label-free paper-based electrochemical platform targeting SARS-CoV-2 antibodies without the specific requirement of an antibody. The presence of SARS-CoV-2 antibodies will interrupt the redox conversion of the redox indicator, resulting in a decreased current response. This electrochemical sensor was proven effective in real clinical sera from patients with satisfactory results. In addition, the proposed format was also extended to antigen detection (the spike protein of SARS-CoV-2), which presents new possibilities for diagnosing COVID-19., Highlights • Electrochemical sensor for COVID-19 diagnostic. • Serological assay for SARS-CoV-2 antibodies was demonstrated. • Sensitivity enhancement compared to the traditional LFA devices. • Applicable to real clinical sera with satisfactory results.

BackgroundThe effects of coronavirus disease 2019 (COVID-19) on the population's mental health and well-being are likely to be profound and long lasting.AimsTo investigate the trajectory of mental health and well-being during the first 6 weeks of lockdown in adults in the UK.MethodA quota survey design and a sampling frame that permitted recruitment of a national sample was employed. Findings for waves 1 (31 March to 9 April 2020), 2 (10 April to 27 April 2020) and 3 (28 April to 11 May 2020) are reported here. A range of mental health factors was assessed: pre-existing mental health problems, suicide attempts and self-harm, suicidal ideation, depression, anxiety, defeat, entrapment, mental well-being and loneliness.ResultsA total of 3077 adults in the UK completed the survey at wave 1. Suicidal ideation increased over time. Symptoms of anxiety, and levels of defeat and entrapment decreased across waves whereas levels of depressive symptoms did not change significantly. Positive well-being also increased. Levels of loneliness did not change significantly over waves. Subgroup analyses showed that women, young people (18–29 years), those from more socially disadvantaged backgrounds and those with pre-existing mental health problems have worse mental health outcomes during the pandemic across most factors.ConclusionsThe mental health and well-being of the UK adult population appears to have been affected in the initial phase of the COVID-19 pandemic. The increasing rates of suicidal thoughts across waves, especially among young adults, are concerning.

Significance: The COVID-19 pandemic is changing the landscape of healthcare delivery in many countries, with a new shift toward remote patient monitoring (RPM). Aim: The goal of this perspective is to highlight the existing and future role of wearable and RPM optical technologies in an increasingly at-home healthcare and research environment. Approach: First, the specific changes occurring during the COVID-19 pandemic in healthcare delivery, regulations, and technological innovations related to RPM technologies are reviewed. Then, a review of the current state and potential future impact of optical physiological monitoring in portable and wearable formats is outlined. Results: New efforts from academia, industry, and regulatory agencies are advancing and encouraging at-home, portable, and wearable physiological monitors as a growing part of healthcare delivery. It is hoped that these shifts will assist with disease diagnosis, treatment, management, recovery, and rehabilitation with minimal in-person contact. Some of these trends are likely to persist for years to come. Optical technologies already account for a large portion of RPM platforms, with a good potential for future growth. Conclusions: The biomedical optics community has a potentially large role to play in developing, testing, and commercializing new wearable and RPM technologies to meet the changing healthcare and research landscape in the COVID-19 era and beyond.

Objectives The emergence of the 2019 novel coronavirus (SARS-CoV-2) has necessitated evaluation of the potential for SARS-CoV-2 infection in dogs and cats. Using a large data set, we evaluated the frequency of SARS-CoV-2 and other respiratory pathogens in samples submitted for respiratory testing from mid-February to mid-April 2020. Materials and methods A SARS-CoV-2 real-time PCR was developed and validated. A subset of canine and feline samples submitted for respiratory pathogen panel testing to reference laboratories in Asia, Europe, and North America were also tested for SARS-CoV-2. The frequency of respiratory pathogens was compared for the February-April period of 2020 and 2019. Results Samples from 4616 patients were included in the study and 44% of canine and 69% of feline samples were PCR positive with Mycoplasma cynos and Bordetella bronchiseptica and Mycoplasma felis and feline calicivirus, respectively. No SARS-CoV-2 infections were identified. Positive results for respiratory samples were similar between years. Clinical significance The data in this study suggest that during the emergence of the SARS-CoV-2 pandemic in early 2020, respiratory diseases in tested pet cats and dogs were caused by common veterinary pathogens and that SARS-CoV-2 infections in dogs and cats are rare.

The SARS-CoV-2 virus is known as the causal agent for the current COVID-19 global pandemic. The majority of COVID-19 patients develop acute respiratory distress syndrome (ARDS), while some experience a cytokine storm effect, which is considered as one of the leading causes of patient mortality. Lipids are known to be involved in the various stages of the lifecycle of a virus functioning as receptors or co-receptors that controls viral propagation inside the host cell. Therefore, lipid-related metabolomics aims to provide insight into the immune response of the novel coronavirus. Our study has focused on determination of the potential metabolomic biomarkers utilizing a Teslin® Substrate in paper spray mass spectrometry (PS-MS) for the development of a rapid detection test within 60 seconds of analysis time. In this study, results were correlated with PCR tests to reflect that the systemic responses of the cells were affected by the COVID-19 virus.

Significance: Infrared thermographs (IRTs) have been used for fever screening during infectious disease epidemics, including severe acute respiratory syndrome, Ebola virus disease, and coronavirus disease 2019 (COVID-19). Although IRTs have significant potential for human body temperature measurement, the literature indicates inconsistent diagnostic performance, possibly due to wide variations in implemented methodology. A standardized method for IRT fever screening was recently published, but there is a lack of clinical data demonstrating its impact on IRT performance. Aim: Perform a clinical study to assess the diagnostic effectiveness of standardized IRT-based fever screening and evaluate the effect of facial measurement location. Approach: We performed a clinical study of 596 subjects. Temperatures from 17 facial locations were extracted from thermal images and compared with oral thermometry. Statistical analyses included calculation of receiver operating characteristic (ROC) curves and area under the curve (AUC) values for detection of febrile subjects. Results: Pearson correlation coefficients for IRT-based and reference (oral) temperatures were found to vary strongly with measurement location. Approaches based on maximum temperatures in either inner canthi or full-face regions indicated stronger discrimination ability than maximum forehead temperature (AUC values of 0.95 to 0.97 versus 0.86 to 0.87, respectively) and other specific facial locations. These values are markedly better than the vast majority of results found in prior human studies of IRT-based fever screening. Conclusion: Our findings provide clinical confirmation of the utility of consensus approaches for fever screening, including the use of inner canthi temperatures, while also indicating that full-face maximum temperatures may provide an effective alternate approach.

Accurate, rapid, and low-cost molecular diagnostics is essential in managing outbreaks of infectious diseases, such as the pandemic of coronavirus disease (COVID-19). Accordingly, microfluidic paper-based analytical devices (μPADs) have emerged as promising diagnostic tools. Among the extensive efforts to improve the performance and usability of μPADs, electrochemical impedance spectroscopy (EIS) based sensing mechanisms have shown great promise, because of their high sensitivity and label-free operations. However, the method to improve EIS biosensing on μPADs is less explored. Here, we present an experimental approach to enhancing the biosensing performance of paper-based EIS nanobiosensors with working electrodes (WEs) decorated with vertically grown zinc oxide nanowires (ZnO NWs). Through a comparison among different EIS settings and an examination of ZnO-WE effects on EIS measurements, we show that Faradaic processes with Fe-based electron mediators are more reliable for ZnO-NW-enhanced working electrodes. We calibrate sensors featuring varied morphologies of ZnO NWs and achieve a low limit of detection (0.4 pg ml−1) for detecting p24 antigen as a marker for human immunodeficiency virus (HIV). Through theoretical analysis, imaging, and electrochemical characterizations, we reveal that the total surface area and electrochemical surface area indicate the sensitivity and sensing range of the EIS nanobiosensors. Finally, we demonstrate that the nanobiosensors are capable of differentiating the concentrations (blank, 10 ng ml−1, 100 ng ml−1, and 1 μg ml−1) of IgG antibody (CR3022) to SARS-CoV-2 in human serum samples, thus confirming the feasibility of applying the devices to COVID-19 diagnosis. This work provides a methodology that can inform the rational design of high-performance EIS-based μPADs and has the potential to facilitate rapid diagnosis in pandemics., Highlights • Paper-based impedance biosensors can provide accurate, rapid, and low-cost diagnostics of infectious diseases. • Nanowires can be directly synthesized on paper-based electrodes for biosensing in a facile process. • Electrochemical surface areas of nanowires affect the sensitivity and detection range of impedance-based biosensors. • Testing of a protein marker specific to COVID-19 has been demonstrated.

International audience; The Covid-19 coronavirus, SARS-CoV-2, is inactivated much faster on paper (3 h) than on plastic (7 d). By classifying materials according to virus stability on their surface, the following list is obtained (from long to short stability): polypropylene (mask), plastic, glass, stainless steel, pig skin, cardboard, banknote, cotton, wood, paper, tissue, copper. These observations and other studies suggest that SARS-CoV-2 may be inactivated by dryness on water absorbent porous materials but sheltered by long-persisting micro-droplets of water on waterproof surfaces. If such physical phenomenons were confirmed by direct evidence, the persistence of the virus on any surface could be predicted, and new porous objects could be designed to eliminate the virus faster.

BackgroundThe COVID-19 pandemic and mitigation measures are likely to have a marked effect on mental health. It is important to use longitudinal data to improve inferences.AimsTo quantify the prevalence of depression, anxiety and mental well-being before and during the COVID-19 pandemic. Also, to identify groups at risk of depression and/or anxiety during the pandemic.MethodData were from the Avon Longitudinal Study of Parents and Children (ALSPAC) index generation (n = 2850, mean age 28 years) and parent generation (n = 3720, mean age 59 years), and Generation Scotland (n = 4233, mean age 59 years). Depression was measured with the Short Mood and Feelings Questionnaire in ALSPAC and the Patient Health Questionnaire-9 in Generation Scotland. Anxiety and mental well-being were measured with the Generalised Anxiety Disorder Assessment-7 and the Short Warwick Edinburgh Mental Wellbeing Scale.ResultsDepression during the pandemic was similar to pre-pandemic levels in the ALSPAC index generation, but those experiencing anxiety had almost doubled, at 24% (95% CI 23–26%) compared with a pre-pandemic level of 13% (95% CI 12–14%). In both studies, anxiety and depression during the pandemic was greater in younger members, women, those with pre-existing mental/physical health conditions and individuals in socioeconomic adversity, even when controlling for pre-pandemic anxiety and depression.ConclusionsThese results provide evidence for increased anxiety in young people that is coincident with the pandemic. Specific groups are at elevated risk of depression and anxiety during the COVID-19 pandemic. This is important for planning current mental health provisions and for long-term impact beyond this pandemic.