Search

Operational performance in the low-voltage distribution network (LVDN) can be undermined by its inherent unbalances, which may become worse as the penetration of rooftop solar continuously increases. To address this issue, load balancing via phase-reconfiguration devices (PRDs), which can change phase positions of residential customers as required, provides a cost-efficient option. However, most reported approaches to control PRDs require that demands of all residential customers are available, which are not viable for many LVDNs without smart meters or advanced metering infrastructure (AMI) installed. To bridging the gap in this field, this paper proposes a novel method to control PRDs purely based on measurable data from PRDs, and its controller. Based on limited information, sensitivity analysis in the network with PRDs is studied, followed by the optimization model that comprehensively considers operational requirements in the network. Moreover, slack variables are introduced to the model, and penalized in the objective function to assure either a strategy that is secure or with minimized violations can always be provided. The model is a challenging mixed-integer non-convex programming (MINCP) problem, which is reformulated as an efficient solvable mixed-integer second-order cone programming (MISOCP) based on exact reformulations or accurate linear approximations. Simulations based on two modified IEEE systems, and a real system in Australia demonstrate that an efficient strategy can be provided to mitigate unbalances in the network. [ABSTRACT FROM AUTHOR]

With the advancements of the battery energy storage systems (BESSs), reduction of their manufacturing costs and government subsidies, the BESS uptake is likely to increase rapidly in power distribution networks. This paper investigates the effects of residential BESSs on low-voltage (LV) networks using the actual household load profiles equipped with BESS and solar-photovoltaic (PV) systems. The electricity consumption data collected via smart meters (2200 households with PV/BESS, 1950 households with PV only and 1000 households without a PV or a BESS) at different solar-PV penetration levels and network types are used to simulate real network operating scenarios. A real LV distribution network in Australia is analysed in DIgSILENT PowerFactory under different scenarios, such as, customers with and without a solar-PV/BESS, with a solar-PV but without a BESS, and without a solar-PV, by using both the power flow and quasi-dynamic simulation studies under balanced and the unbalanced network loading conditions. According to the study, customers experience large voltage excursions from solar-PV power exports, which could be resolved by the household BESS, provided that the BESS charging is coordinated with the solar-PV production. Moreover, quasi-dynamic simulation shows that the BESS could reduce the violation of the over-voltage limit during the solar peak hours (midday) by lowering the worst-case feeder voltage by 3%. Finally, extreme-event (high solar PV generation scenario) simulation shows that the implementation of the BESS controller to facilitate charging BESS during afternoon solar-PV export may reduce the negative grid impact and will assist to avoid network upgrades. [ABSTRACT FROM AUTHOR]

Australia's electricity networks are experiencing low demand during the day due to excessive residential solar export and high demand during the evening on days of extreme temperature due to high air conditioning use. Pre-cooling and solar pre-cooling are demand-side management strategies with the potential to address both these issues. However, there remains a lack of comprehensive studies into the potential of pre-cooling and solar pre-cooling due to a lack of data. In Australia, however, extensive datasets of household energy measurements, including consumption and generation from rooftop solar, obtained through retailer-owned smart meters and household-owned third-party monitoring devices, are now becoming available. However, models presented in the literature which could be used to simulate the cooling energy in residential homes are temperature-based, requiring indoor temperature as an input. Temperature-based models are, therefore, precluded from being able to use these newly available and extensive energy-based datasets, and there is a need for the development of new energy-based simulation tools. To address this gap, a novel data-driven model to estimate the cooling energy in residential homes is proposed. The model is temperature-independent, requiring only energy-based datasets for input. The proposed model was derived by an analysis comparing the internal free-running and air conditioned temperature data and the air conditioning data for template residential homes generated by AccuRate, a building energy simulation tool. The model is comprised of four linear equations, where their respective slope intercepts represent a thermal efficiency metric of a thermal zone in the template residential home. The model can be used to estimate the difference between the internal free-running, and air conditioned temperature, which is equivalent to the cooling energy in the thermal zone. Error testing of the model compared the difference between the estimated and AccuRate air conditioned temperature and gave average CV-RMSE and MAE values of 22% and 0.3 °C, respectively. The significance of the model is that the slope intercepts for a template home can be applied to an actual residential home with equivalent thermal efficiency, and a pre-cooling or solar pre-cooling analysis is undertaken using the model in combination with the home's energy-based dataset. The model is, therefore, able to utilise the newly available extensive energy-based datasets for comprehensive studies on pre-cooling and solar pre-cooling of residential homes. [ABSTRACT FROM AUTHOR]

An increasing number of residential customers have installed hybrid rooftop solar battery systems (HRSBSs). Currently, most HRSBSs are installed behind-the-meter (BTM), where only customers’ net load is measured by smart meters. This invisibility poses significant challenges to the system operation. Disaggregating BTM PV generation and battery charging/discharging profile of customers can enhance the grid-edge observability. This article proposes an energy disaggregation method to jointly separate the PV generation and battery charging/discharging power from the net load. First, a Home Smart Battery Management model is built to simulate the battery charging/discharging profile. Second, an optimal disaggregation model is established based on a contextually supervised source separation method. Furthermore, the feature vectors of PV, load, and battery are extracted as the input of the disaggregation model. Case studies on two datasets from Australia and China show that the proposed method has a promising disaggregation performance. [ABSTRACT FROM AUTHOR]

Proposals to reform default 'flat-rate' electricity tariffs are rarely met with enthusiasm by consumer groups or policymakers because they produce winners and losers. Proposals to initiate more cost-reflective time-of-use rates will be met with cautious interest if the basis of customer participation is 'opt-in'. Using the smart meter data of 160,000 residential customers from the Victorian region of Australia's National Electricity Market, our tariff model reveals that households in financial hardship are the most adversely affected from existing flat-rate structures. Even after network tariff rebalancing, Hardship and Concession & Pensioner Households are, on average, beneficiaries of more cost-reflective tariff structures once Demand Response is accounted for. [ABSTRACT FROM AUTHOR]