Search

Tannin-based foams have gained attention as a potential bio-based alternative to conventional synthetic foams. Traditionally, namely condensed tannins (CT) have been used, leaving the potential of hydrolysable tannins (HT) largely unexplored. This study compared the performance of chestnut (HT) and quebracho (CT) in tannin–protein-based foams at different tannin ratios. Using soy protein isolate (SPI) and hexamine under acidic conditions, a series of tannin foams were produced through a mechanical foaming method and analyzed for cell structure, compression strength, thermal conductivity, and chemical stability. Results show that chestnut tannin is viable in hexamine SPI formulations but is harder to process due to lower reactivity, further resulting in higher material densities compared to quebracho. Foams with higher quebracho content featured smaller, more interconnected cells, while increasing chestnut content led to larger, less interconnected cells. Compression strength decreased with higher chestnut content, while fire resistance and thermal conductivity were influenced by material density rather than tannin type. The 13C-NMR analysis revealed covalent bonding of hexamine with both tannins, but potential covalent bonds with SPI were undetectable. Overall, chestnut tannin can substitute quebracho tannin in hexamine-SPI foams, though with compromises in terms of specific material properties and processability. [ABSTRACT FROM AUTHOR]

To investigate the molecular structure characteristics and chemical reaction mechanisms of gas coal from the Hong II coal mine of the Ningxia Hongdunzi Coal Industry, this study explores its elemental composition, structural features, and methods for constructing and optimizing molecular models. The basic properties of the coal were determined through proximate and elemental analyses. The carbon structure was characterized using 13C-NMR nuclear magnetic resonance, the N and S chemical states were analyzed with XPS, and the distribution of hydroxyl, aliphatic hydrocarbons, aromatic rings, and oxygen-containing functional groups was characterized by FT-IR. Based on the analysis results, a molecular structure model of Hongdunzi gas coal was constructed with the molecular formula C204H117O17NS, and the calculated results of the model showed high consistency with the experimental spectra of 13C-NMR. The macromolecular model of gas coal was constructed using the Materials Studio 2020 software, and its structure was optimized through geometric optimization and dynamic simulations. After optimization, the total energy of the model was significantly reduced from 8525.12 kcal·mol−1 to 3966.16 kcal·mol−1, highlighting the enhanced stability of the coal molecular structure. This optimization indicates that torsional energy plays a dominant role in molecular stability, while van der Waals forces and electrostatic interactions were significantly improved during the optimization process. [ABSTRACT FROM AUTHOR]

Fine roots are key to ecosystem-scale nutrient, carbon (C), and water cycling, yet our understanding of fine root trait variation within and among tropical forests, one of Earth's most C-rich ecosystems, is limited. We characterized root biomass, morphology, nutrient content, and arbuscular mycorrhizal fungal (AMF) colonization to 1.2 m depths across four distinct lowland Panamanian forests, and related root characteristics to soil C stocks. We hypothesized that: (H1) Fine root characteristics vary consistently with depth across seasonal tropical forests, with deeper roots exhibiting more exploratory traits, such as for deep water acquisition; (H2) fine root characteristics vary among tropical forests mainly in surface soils, where resource availability also varies. We found consistent variation with depth across the four forests, including decreased root biomass, root tissue density, and AMF, and increased specific root length. Among the forests, there was variation in some fine root characteristics, including greater surface root biomass and lower SRL in the wettest forest, and smaller fine root diameter in the driest forest. We also found that root characteristics were related to total soil C stocks, which were positively related to root biomass and negatively related to specific root length. These results indicate emergent properties of root variation with depth across tropical forests, and show site-scale variation in surface root characteristics. Future work could explore the flexibility in root characteristics under changing conditions such as drought. [ABSTRACT FROM AUTHOR]

[Purposes] While extensive research has been conducted on the evolution of coal′s molecular structure during coalification, the heterogeneity and complexity of coal continue to impede the accurate and precise quantitative characterization of its structural evolution mechanism. [Methods] Through maceral identification, vitrinite reflectance, industrial quality, elemental analysis, and spectral analysis, the carbon skeleton structure and occurrence state of functional groups of bituminous coal (FS1) and anthracite coal (ZY1) were determined. Two molecular structure models were established by computer-aided molecular design. [Finding] The results show that with the progress of coalification, the loss rate of methylene is faster than that of methyl in the process of bituminous coal to anthracite, the aromaticity is enhanced, the aliphatic chain of aromatic ring becomes shorter and the degree of branching is higher, the oxygen-containing functional groups is gradually reduced, the crystallinity of coal is enhanced, and the chemical structure of coal tends to be mature and stable. At the sometime, the content of aliphatic carbon in coal decreases, the content of aromatic carbon increases, and the content of methyl carbon and methylene carbon decreases. After several attempts, the bonding mode between aromatic carbon, aliphatic side chain, and oxygen functional group was determined, and the final molecular structure models were obtained: C175H162O13N2 (FS1), C190H159O5N3 (ZY1). These models well reflect the real structure of coal, and the simulated 13C NMR spectra are in good agreement with the experimental spectra. The above research provides a theoretical reference for the molecular structure evolution of coal with different metamorphic degrees, and provides a method for establishing high-reliability molecular structure characterization.

A root factor for the accuracy of all quantum chemical calculations of nuclear magnetic resonance (NMR) chemical shifts is the quality of the molecular equilibrium geometry used. In turn, this quality depends largely on the basis set employed at the geometry optimization stage. This parameter represents the main subject of the present study, which is a continuation of our recent work, where new pecG-n (n = 1, 2) basis sets for the geometry optimization were introduced. A goal of this study was to compare the performance of our geometry-oriented pecG-n (n = 1, 2) basis sets against the other basis sets in massive calculations of 13C NMR shielding constants/chemical shifts in terms of their efficacy in reducing geometry factor errors. The testing was carried out with both large-sized biologically active natural products and medium-sized compounds with complicated electronic structures. The former were treated using the computation protocol based on the density functional theory (DFT) and considered in the theoretical benchmarking, while the latter were treated using the computational scheme based on the upper-hierarchy coupled cluster (CC) methods and were used in the practical benchmarking involving the comparison with experimental NMR data. Both the theoretical and practical analyses showed that the pecG-1 and pecG-2 basis sets resulted in substantially reduced geometry factor errors in the calculated 13C NMR chemical shifts/shielding constants compared to their commensurate analogs, with the pecG-2 basis set being the best of all the considered basis sets. [ABSTRACT FROM AUTHOR]

The control of metabolic networks is incompletely understood, even for glycolysis in highly studied model organisms. Direct real-time observations of metabolic pathways can be achieved in cellular systems with 13C NMR using dissolution Dynamic Nuclear Polarization (dDNP NMR). The method relies on a short-lived boost of NMR sensitivity using a redistribution of nuclear spin states to increase the alignment of the magnetic moments by more than four orders of magnitude. This temporary boost in sensitivity allows detection of metabolism with sub-second time resolution. Here, we hypothesized that dDNP NMR would be able to investigate molecular phenotypes that are not easily accessible with more conventional methods. The use of dDNP NMR allows real-time insight into carbohydrate metabolism in a Gram-positive bacterium (Lactoccocus lactis), and comparison to other bacterial, yeast and mammalian cells shows differences in the kinetic barriers of glycolysis across the kingdoms of life. Nevertheless, the accumulation of non-toxic precursors for biomass at kinetic barriers is found to be shared across the kingdoms of life. We further find that the visualization of glycolysis using dDNP NMR reveals kinetic characteristics in transgenic strains that are not evident when monitoring the overall glycolytic rate only. Finally, dDNP NMR reveals that resting Lactococcus lactis cells use the influx of carbohydrate substrate to produce acetoin rather than lactate during the start of glycolysis. This metabolic regime can be emulated using suitably designed substrate mixtures to enhance the formation of the C4 product acetoin more than 400-fold. Overall, we find that dDNP NMR provides analytical capabilities that may help to clarify the intertwined mechanistic determinants of metabolism and the optimal usage of biotechnologically important bacteria. [ABSTRACT FROM AUTHOR]

New probe naphthalen-2-yl-N′-(2-hydroxybenzoyl)benzohydrazonate (NHBH) chemosensor has been prepared and characterized by IR, 1H NMR, 13C NMR and Mass Spectroscopic techniques. The probe (NHBH) was subjected to study its cation sensing ability with twelve different metal chloride salt (Al3+, Ca2+, Co2+, Cr3+, Fe3+, Cu2+, Mn2+, Ni2+, Zn2+, Hg2+, K+ and Na+) in 1:4 methanol water medium by using absorption and emission titration experiments. The results showed that the probe detected Fe3+ and Na ​+ ​ions by showing absorption enhancement and fluorescence emission quenching. Further, NHBH exhibited good selectivity for Fe3+ and Na ​+ ​ions in the presence of mostother metal ions. Job's plot analysis authenticated the 1:1 binding nature of NHBH with Fe3+ and Na ​+ ​ions. Further, DFT studies validated the formation of probe (NHBH), fluorophore-quencher (Fe-NHBH) complex formation.

Early NMR studies of several heterohelicenes containing an annular nitrogen atom and a thiophene ring in their structure suggested the possibility of the lengthening of the carbon–carbon bonds in the interior of the helical turn of the molecule based on the progressive upfield shift of 13C resonances toward the center of the helical turn. We now report a comprehensive analysis of the optimized geometry and a comparison of the calculated vs. observed 1H and 13C NMR chemical shifts of nineteen representative benzothienoquinoline heterohelicenes. As was initially hypothesized on the basis of the progressive upfield shift of carbon resonances toward the center of the interior helical turn, the present computational study has demonstrated that carbon–carbon bonds indeed have more sp3 character and are longer than normal sp2 bonds to accommodate the helical twist of the molecule, as expected. [ABSTRACT FROM AUTHOR]

Mefloquine (MQ) is an antimalarial medication prescribed to treat or malaria prevention.. When taken by children, vomiting usually occurs, and new doses of medication frequently need to be taken. So, developing pediatric medicines using taste-masked antimalarial drug complexes is mandatory for the success of mefloquine administration. The hypothesis that binding mefloquine to an ion-exchange resin (R) could circumvent the drug's bitter taste problem was proposed, and solid-state 13C cross-polarization magic angle spinning (CPMAS) NMR was able to follow MQ–R mixtures through chemical shift and relaxation measurements. The nature of MQ–R complex formation could then be determined. Impedimetric electronic tongue equipment also verified the resinate taste-masking efficiency in vitro. Variations in chemical shifts and structure dynamics measured by proton relaxation properties (e.g., T1ρH) were used as probes to follow the extension of mixing and specific interactions that would be present in MQ–R. A significant decrease in T1ρH values was observed for MQ carbons in MQ–R complexes, compared to the ones in MQ (from 100–200 ms in MQ to 20–50 ms in an MQ–R complex). The results evidenced that the cationic resin interacts strongly with mefloquine molecules in the formulation of a 1:1 ratio complex. Thus, 13C CPMAS NMR allowed the confirmation of the presence of a binding between mefloquine and polacrilin in the MQ–R formulation studied. [ABSTRACT FROM AUTHOR]

Cover crops are one of the climate-smart agricultural practices used to increase soil organic carbon (SOC) sequestration. However, the SOC sequestration potential and underlying mechanisms under different cover crops, especially in orchard agroecosystems, have not been fully elucidated. Here, we investigated three orchards in China using SOC fractionation methods, high-throughput sequencing, and biomarker analysis. Our objectives were to determine the effect of cover crops on the physical fractions and chemical compositions of SOC, as well as on microbial properties, and to clarify why legume and non-legume cover crops sequester SOC differently. The results showed different increases in SOC between legume and non-legume cover crops (+38% vs. +16%) compared with those in the control plots without cover crops. Legume cover crops increased mineral-associated and particulate organic carbon, whereas non-legume cover crops increased mineral-associated organic carbon only. These differences were attributed to their distinct effects on microbial SOC transformation pathways. Legume cover crops positively impacted microbial pathways by increasing the availability of soil substrates and nitrogen, such as dissolved organic carbon (+84%), O-alkyl carbon (+18%), and ammonium nitrogen (+42%). These results were supported by the increases in carbon and nitrogen enzyme activities, microbial community diversity indices, the abundance of dominant fungal taxa (Sordariomycetes), microbial biomass carbon (+105%), and microbial necromass carbon (+47%). Non-legume cover crops might have induced microbial nitrogen starvation, decreasing the efficiency of microbial pathways, as evidenced by the low β-glucosidase to β-N-acetylglucosaminidase ratios (−7%) and the lack of significant changes in the bacterial Shannon index or microbial necromass carbon. In addition, redundancy analysis revealed that enzyme activity, the microbial community, and microbial necromass carbon collectively dominated the changes in the SOC physical fraction. Site-specific soil properties such as soil texture and nitrogen availability were important factors influencing SOC sequestration under cover crops. Our study provides essential insights for optimizing cover crop management to increase SOC sequestration in orchard agroecosystems.

While spent mushroom substrate (SMS) has shown promise in increasing soil organic carbon (SOC) and improving soil quality, research on the interplay between SOC components and microbial community following the application of diverse SMS types remains scant. A laboratory soil incubation experiment was conducted with application of two types of SMSs from cultivation of Pleurotus eryngii (PE) and Agaricus bisporus (AB), each at three application rates (3, 5.5, and 8%). Advanced techniques, including solid-state 13C nuclear magnetic resonance (NMR) and high-throughput sequencing, were employed to investigate on SOC fractions and chemical structure, microbial community composition and functionality. Compared to SMS-AB, SMS-PE application increased the relative abundances of carbohydrate carbon and O-alkyl C in SOC. In addition, SMS-PE application increased the relative abundance of the bacterial phylum Proteobacteria and those of the fungal phyla Basidiomycota and Ascomycota. The relative abundances of cellulose-degrading bacterial (e.g., Flavisolibacter and Agromyces) and fungal genera (e.g., Myceliophthora, Thermomyces, and Conocybe) were increased as well. The application of SMS-AB increased the aromaticity index of SOC, the relative abundance of aromatic C, and the contents of humic acid and heavy fraction organic carbon. In addition, SMSAB application significantly increased the relative abundances of the bacterial phyla Firmicutes and Actinobacteria. Notably, the genera Actinomadura, Ilumatobacter, and Bacillus, which were positively correlated with humic acid, experienced an increase in relative abundance. Functional prediction revealed that SMS-PE application elevated carbohydrate metabolism and reduced the prevalence of fungal pathogens, particularly Fusarium. The application of highrate SMS-AB (8%) enhanced bacterial amino acid metabolism and the relative abundances of plant pathogenic fungi. Our research provides strategies for utilizing SMS to enrich soil organic carbon and fortify soil health, facilitating the achievement of sustainable soil management. [ABSTRACT FROM AUTHOR]

Chitin, a ubiquitous biopolymer, holds paramount scientific and economic significance. Historically, it has been primarily isolated from marine crustaceans. However, the surge in demand for chitin and the burgeoning interest in biopolymers have necessitated the exploration of alternative sources. Among these methods, the mulberry silkworm (Bombyx mori) has emerged as a particularly intriguing prospect. To isolate chitin from Bombyx mori, a chemical extraction methodology was employed. This process involved a series of meticulously orchestrated steps, including Folch extraction, demineralization, deproteinization, and decolorization. The resultant chitin was subjected to comprehensive analysis utilizing techniques such as attenuated total reflectance–Fourier transform infrared spectroscopy (ATR-FTIR), 13C nuclear magnetic resonance (NMR) spectroscopy, and wide-angle X-ray scattering (WAXS). The obtained results allow us to conclude that the Bombyx mori represents an attractive alternative source of α-chitin. [ABSTRACT FROM AUTHOR]

Chicken feathers represent a viable material for producing biochar adsorbents. Traditional slow pyrolysis methods often result in sulfur element losses from chicken feathers, whereas hydrothermal reactions generate substantial amounts of nutrient-rich hydrothermal liquor. Magnesium-modified high-sulfur hydrochar MWF was synthesized through magnesium modification, achieving a S content of 3.68%. The maximum equilibrium adsorption amounts of MWF for Cd2+ and Pb2+ were 25.12 mg·g−1 and 70.41 mg·g−1, respectively, representing 4.00 times and 2.75 times of WF. Magnesium modification elevated the sulfur content, pH, ash content, and electronegativity of MWF. The primary mechanisms behind MWF's adsorption of Cd2+ and Pb2+ involve magnesium ion exchange and complexation with C=O/O=C–O, quaternary N, and S functional groups. MWF maintains robust stability and antioxidative properties, even with low aromaticity levels. Given the lower energy consumption during hydrochar production, MWF offers notable carbon sequestration benefits. The hydrothermal solution derived from MWF is nutrient-rich. Following supplementation with inorganic fertilizer, the hydrothermal solution of MWF significantly enhanced bok choy growth compared to the control group. In general, adopting magnesium-modified hydrothermal reactions to produce hydrochar and converting the resultant hydrothermal solution into water-soluble fertilizer proves a viable strategy for the eco-friendly utilization of chicken feathers. This approach carries substantial value for heavy metal remediation and agricultural practices. [ABSTRACT FROM AUTHOR]

Since the discovery of the first ferroelectric liquid crystal (FLC) in the chiral smectic C (SmC*) phase, ferroelectricity in liquid crystals has attracted much attention due to not only the fundamental interest but also the applications. This review focuses on the evolution of the design concept for ferroelectric smectic liquid crystals. It progresses from considering macroscopic phase symmetry to designing intermolecular interactions. For the purpose of understanding the molecular organization in smectic phases, we propose a dynamic model of constituent molecules in the smectic A (SmA) and SmC* phases based on 13C NMR studies. Then, we follow the structure–property relationship in ferroelectric SmC* liquid crystals for FLC displays. We reconsider de Vries-like materials that can provide defect-free alignment. We pay attention to the electro-optical switching in the chiral de Vries smectic A phase. Finally, we show several liquid crystals exhibiting polar smectic A phases and discuss how the polar order occurs in the highest symmetric smectic A phase. [ABSTRACT FROM AUTHOR]

The object of the study is lignite. Analytical testing techniques, such as elemental analysis, 13C nuclear magnetic resonance (13C NMR) spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HRTEM), were used to acquire information on the structural parameters of lignite. The aromaticity of Xianfeng lignite is 43.57%, and the aromatic carbon structure is mainly naphthalene and anthracene/phenanthrene. The aliphatic carbon structure is dominated by cycloalkanes, alkyl side chains, and hydrogenated aromatics. Oxygen is mainly present in ether oxygen, carboxyl, and carbonyl groups. Nitrogen is mainly in the form of pyrrole nitrogen and quaternary nitrogen. Sulfur is mainly thiophene sulfur. According to the analysis results, the molecular structure model of XF lignite was constructed. The molecular formula is C184H172O39N6S2. The 2D structure was converted to a 3D structure using computer simulation software and optimized. The optimized model has a remarkable stereoconfiguration, and the aromatic lamellae are irregularly arranged in space. The aromatic rings were mainly connected by methylene, hypomethylene, methoxy, and aliphatic rings. In addition, the simulated 13C NMR spectra are in good agreement with the experimental spectra. This shows the rationality of the 3D chemical structure model. [ABSTRACT FROM AUTHOR]

13C NMR spectroscopic analyses of Cs symmetric guest molecules in the cyclodextrin host cavity, combined with molecular modelling and solid-state X-ray analysis, provides a detailed description of the spatial arrangement of cyclodextrin host–guest complexes in solution. The chiral cavity of the cyclodextrin molecule creates an anisotropic environment for the guest molecule resulting in a splitting of its prochiral carbon signals in 13C NMR spectra. This signal split can be correlated to the distance of the guest atoms from the wall of the host cavity and to the spatial separation of binding sites preferred by pairs of prochiral carbon atoms. These measurements complement traditional solid-state analyses, which rely on the crystallization of host–guest complexes and their crystallographic analysis.

Quantitative NMR experiments are an essential part of NMR analysis, which play a critical role in component analysis and compound structure identification. Carbon atoms form the framework of organic compounds, and 13C NMR has unique advantages in organic analysis due to its wide chemical shift range, narrow spectral peaks, and broadband decoupling capability. However, the low natural abundance, low gyromagnetic ratio, and long longitudinal relaxation time of 13C nuclei hinder its wider application in quantitative experiments. In our previous work, we proposed the Q-DEPT+ pulse sequence and designed a double loop of pulse flip angle and polarization transfer time, which allows for uniform sensitivity enhancement for the three types of carbon nuclei, CH, CH2, and CH3, within a wide 1JCH range, making it suitable for quantitative 13C NMR. In this study, we further optimized the polarization transfer time and read pulse width of the Q-DEPT+ experiment by using a genetic algorithm, and replaced the 180° hard pulse in the 13C channel with a G5 composite pulse that compensates for the frequency offset effect. The optimized pulse sequence was named Q-DEPT ++. Quantitative experiments were performed on cholesterol acetate in CDCl3 by using the reverse-gated decoupling pulse sequence (zgig), Q-DEPT+, and Q-DEPT++ respectively, and the quantification accuracy and sensitivity of the three pulse sequences were compared. The results showed that Q-DEPT++ has obvious improvement in both quantification accuracy and sensitivity.

Scientific relevance. Hypromellose phthalate is a component of enteric coatings used to modify active substance release from oral medicinal products in the small intestine. The release rate directly depends on the non-stoichiometric composition of the polymer, first of all, on the proportion of phthalate groups in the macromolecule. It is therefore necessary to develop reliable analytical procedures for determining the structure of hypromellose phthalate to evaluate the dissolution rate of medicinal products containing the polymer.Aim. The study aimed to develop an analytical procedure for quantifying the proportion of phthalate groups in hypromellose phthalate samples using NMR spectroscopy and to determine the relationship between the polymer dissolution rate in aqueous buffer solutions and its structural features (degree of molar substitution and molecular mass).Materials and methods. The study examined hypromellose phthalate samples isolated from enteric coatings of proton-pump inhibitors and used the reference standard for hypromellose phthalate. The non-stoichiometric composition of the polymer was determined by 13C NMR spectroscopy.Results. The authors established the conditions required to separate hypromellose phthalate from the other coating components and identified the characteristic 13C NMR signals that may be used to differentiate between the structural fragments of hypromellose phthalate. The study demonstrated the relationship between the dissolution rate and the structure of the polymer. Commercial grades of hypromellose phthalate were shown to differ in composition and, as a result, in their dissolution kinetics (in particular, the threshold pH for the onset of dissolution (5.0–5.5), as well as the dissolution rates at the same pH).Conclusions. The authors developed NMR-based procedures to determine the proportion of phthalate groups on the basis of their mass fraction in a weighted hypromellose phthalate sample and the degree of molar substitution of the polymer. The results support the applicability of these analytical procedures to the characterisation of sample composition in polymer dissolution rate studies. In principle, it is possible to derive a multiple linear regression equation that describes the dissolution rate of hypromellose phthalate as a function of the molecular mass and the molar substitution with phthalate groups. Further investigation of a larger number of polymer samples with different compositions is needed to improve the regression model and demonstrate its statistical significance. In addition to the proportion of phthalate groups, the pharmacopoeial analysis of hypromellose phthalate should also control the molecular mass of the polymer.

The robustness of NMR coherence transfer in proximity of a paramagnetic center depends on the relaxation properties of the nuclei involved. In the case of Iron-Sulfur Proteins, different pulse schemes or different parameter sets often provide complementary results. Tailored versions of HCACO and CACO experiments significantly increase the number of observed Cα/C' connectivities in highly paramagnetic systems, by recovering many resonances that were lost due to paramagnetic relaxation. Optimized 13C direct detected experiments can significantly extend the available assignments, improving the overall knowledge of these systems. The different relaxation properties of Cα and C' nuclei are exploited in CACO vs COCA experiments and the complementarity of the two experiments is used to obtain structural information. The two [Fe2S2]+ clusters containing NEET protein CISD3 and the one [Fe4S4]2+ cluster containing HiPIP protein PioC have been taken as model systems. We show that tailored experiments contribute to decrease the blind sphere around the cluster, to extend resonance assignment of cluster bound cysteine residues and to retrieve details on the topology of the iron-bound ligand residues. [ABSTRACT FROM AUTHOR]

There were some ecological and environmental problems in limestone soil in the karst peak-cluster depression in Pingguo City of Guangxi, such as the destruction of soil structure, soil acidification and soil fertility decline, and these problems were closely related to soil organic matter. The soil in this site was classified as Cambisols. Therefore, this project took soil under five major land uses (grassland, afforestation, sugarcane field, corn field and pitaya field) in the karst area of Guangxi as the research object. The contents and molecular structure properties of humic acids, fulvic acids and humins in soils were studied by solid-state 13C nuclear magnetic resonance spectroscopy and elemental composition. From the perspective of the chemical structure of humic substances, the differences in the quantity and structural characteristics of humic acids, fulvic acids and humins in different land uses were revealed. The results showed that the organic carbon content of both afforestation (34.83 g kg−1) and natural restored grassland (31.67 g kg−1) were significantly higher than that of sugarcane field (17.60 g kg−1), corn field (16.35 g kg−1) and pitaya field (14.31 g kg−1) (p < 0.05). The contents of three humic fractions in grassland were relatively high, and the contents of three humic fractions in sugarcane field were relatively low (p < 0.05). The structural characteristics of humic substances showed that the protein components of the three humic fractions in the afforestation were high, indicating that the humic substances in the afforestation contained more unstable components. The Alkyl C/O-alkyl C and Hydrophobic C/hydrophilic C ratios of the three humic fractions of corn field were high, indicating high stability and maturity in humic substances in corn field. [ABSTRACT FROM AUTHOR]

Abstract In the nuclear magnetic resonance (NMR) test of coal, when the spinning frequency of magic‐angle spinning (MAS) is less than the frequency range of chemical shift anisotropy, serious aromatic carbon spinning sidebands will appear. Existing solutions to the sideband effect, such as changing the MAS frequency, inserting total suppression of sidebands (TOSS) pulse sequences, or simply defining the peak after chemical shift of 200 ppm as the sideband peaks generated by aromatic carbon peak, multipling the identified sideband integral by 2 and adding to the main peaks of protonated aromatic carbon and aromatic bridgehead carbon. None of these methods can reasonably correct for the sideband effect and cause errors to accurately quantifying the carbon structure parameters. Compared with 13C nuclear magnetic resonance (13C NMR) spectrum without sideband suppression (13C CP‐MAS NMR) and 13C NMR spectrum under sideband suppression conditions (13C CP‐MAS/TOSS NMR), according to the chemical shifts of the main peaks of four aromatic carbons, namely protonated aromatic carbon, aromatic bridgehead carbon, alkylated aromatic carbon and oxygen‐linked aromatic carbon, combined with the MAS frequency, the first‐ and second‐level sideband peaks generated by four types of aromatic carbons were accurately located and quantified, and they were added to the corresponding aromatic carbon main peaks in 13C CP‐MAS/TOSS NMR spectrum, thus realizing the accurate correction of sideband effect of the solid‐state 13C NMR spectrum of coal samples. The relative area of corrected aliphatic carbon, carbonyl (carboxyl) carbon, and various aromatic carbons were recalculated, and more accurate carbon structure parameters were obtained, which is significant for studying the coal structure from a microscopic perspective.

The basis set issue has always been one of the most important factors of accuracy in the quantum chemical calculations of NMR chemical shifts. In a previous paper, we developed new pecS-n (n = 1, 2) basis sets purposed for the calculations of the NMR chemical shifts of the nuclei of the most popular NMR-active isotopes of 1–2 row elements and successfully approbated these on the DFT calculations of chemical shifts in a limited series of small molecules. In this paper, we demonstrate the performance of the pecS-n (n = 1, 2) basis sets on the calculations of as much as 713 1H and 767 13C chemical shifts of 23 biologically active natural products with complicated stereochemical structures, carried out using the GIAO-DFT(PBE0) approach. We also proposed new alternative contraction schemes for our basis sets characterized by less contraction depth of the p-shell. New contraction coefficients have been optimized with the property-energy consistent (PEC) method. The accuracies of the pecS-n (n = 1, 2) basis sets of both the original and newly contracted forms were assessed on massive benchmark calculations of proton and carbon chemical shifts of a vast variety of natural products. It was found that less contracted pecS-n (n = 1, 2) basis sets provide no noticeable improvement in accuracy. These calculations represent the most austere test of our basis sets as applied to routine calculations of the NMR chemical shifts of real-life compounds. [ABSTRACT FROM AUTHOR]

Composting is described as a sustainable alternative to organic waste reuse from the agricultural and household sectors. The organic matter degradation and stabilization product presents great variability due to the waste composition used. Thus, the use of techniques that allow the monitoring of the decomposition process is necessary to determine the quality of the final product. Therefore, this review critically analyzes and updates the chemical spectroscopy methods described for the evaluation of the organic matter transformation in the composting process to optimize and generate amendments for agricultural use. This review examines spectroscopic techniques such as ultraviolet-visible (UV-Vis), infrared (IR), fluorescence, and 13C NMR reported for the evolution and maturation of carbonate structures in composting. In addition, they are used in the study of indicators for monitoring the degradation of complex structures, such as sugars and proteins, for the formation of precursors that are responsible for the formation of highly stabilized substances such as humic and fulvic compounds. Finally, these parameters may be used to elucidate organic matter degradation and its stabilization process, establish patterns that characterize each stage of composting along with its physicochemical characteristics, and monitor potential phytotoxicity levels. [ABSTRACT FROM AUTHOR]

Agar is a hydrophilic biopolymer extracted from red seaweed. This phycocolloid consists of two components: agarose and agaropectin. In the present work, agar extracted from the invasive red seaweed Agarophyton vermiculophyllum was characterized using physical, chemical, and spectroscopic analyses to investigate the effect of alkaline pretreatment on agar properties. Two extraction conditions, native and alkali-pretreated agars, were comparatively studied. The native yield (28.4 ± 0.9%) was higher than that of the alkaline-pretreated agar (20.4 ± 0.8%). The alkali-pretreated agar showed higher gel strength (763.8 ± 57.0g cm−2), gelling (36.5 ± 0.9 °C), and melting (83.2 ± 0.6 °C) temperatures and increased 3,6-anhydrogalactose (26.2 ± 1.9%) and decreased sulfate contents (6.2 ± 0.8%) compared with native agar (gel strength: 204.8 ± 17.10g cm−2, gelling temperature: 29.5 ± 0.9 °C, melting temperature: 73.4 ± 0.7 °C, 3,6-AG content: 13.8 ± 0.7%, sulfate content: 10.5 ± 0.5%). The alkaline pretreatment improved the agar's gelling properties and significantly influenced its chemical properties. In view of the obtained results, A. vermiculophyllum might potentially be thought of as a viable source for the agar industry in Morocco, serving as a local source of agar. [ABSTRACT FROM AUTHOR]

Cladanthus mixtus (L.) Chevall., Asteraceae, also known as Moroccan chamomile, is a spontaneous, annual plant growing wild in North-Western Morocco. Economically, the essential oil of C. mixtus is of high interest, Morocco being the only supplier on the international market. Two essential oil samples (EO) were isolated from aerial parts of Cladanthus mixtus (L.) Chevall., and analyzed by a combination of chromatographic and spectroscopic techniques (gas chromatography (GC) in combination with retention indices (RI), gas chromatography-mass spectrometry (GC/MS), and 13C NMR spectroscopy). Computer matching against the in-house 13C NMR library allowed the identification of the eight components at appreciable contents, namely 3,6,6,9-bis-epoxy-farnesa-1,7(14),10-triene, and its 3-epi, 9-epi, and 3,9-diepi epimers, and 6,9-epoxy-farnesa-1,7(14),10-trien-3-ol and its 3-epi, 6-epi, and 3,6-diepi epimers. Our results confirm the tremendous chemical variability of Moroccan C. mixtus essential oil and the usefulness of 13C NMR analysis, in combination with GC(RI), for the identification of uncommon oxygenated sesquiterpenes that induce an original composition.

Three compounds of novel pyrazolo[3,4-d]pyrimidin-4-one derivatives (A~C) were synthesized through a multi-step reaction using ethyl-2-cyano-3-ethoxyacrylate and 3,4-dimethylphenylhydrazine. The structures of these compounds were identified by nuclear magnetic resonance (NMR, i.e., 1H NMR, 13C NMR), and liquid chromatography-mass spectrum (LC-MS), and the 1H NMR signals of each compound were fully assigned. The in vivo analgesic activity of synthesized compound A was preliminarily evaluated through mass spectrometry brain imaging and formalin induced pain model in mice. The imaging data and results showed that compound A could cross the blood-brain barrier and penetrate into the brain of mice, and produce a dose-dependent analgesic activity. This study provided a piece of fundamental research data on structural and in vivo activity for developing anti-pain drugs based on pyrazolo[3,4-d]pyrimidin-4-one scaffold.

Tropical peatlands serve as huge carbon (C) pools in the global C balance, and degradation due to agricultural use is a major concern. The objective of the present study was to examine the relationship between the C loss rate in agriculturally drained tropical peat soils in relation to groundwater level (GWL) and the chemical structure of the resulting soil organic matter (SOM). Soil mesocosms containing three peat soils collected from three forest types in Malaysia, Mixed peat swamp (MPS), Alan Batu (ABt), and Alan Bunga (ABg) forests, which are classified based on dominant plant species, species diversity, and forest structure, were buried in an oil palm plantation for a period of five years. Soil samples packed in the top layer (0–20 cm depth) and the bottom (60–80 cm depth) layer were then analyzed and the results were compared with the initial values for these soils. Weight loss, total C and N contents, ash content, and pyrophosphate solubility index (PSI; an index of the degree of humification) were measured. Changes in the chemical structure of the SOC were investigated using solid-state 13C nuclear magnetic resonance (NMR) spectroscopy with phase-adjusted spinning side bands and thermally assisted hydrolysis and methylation-gas chromatography/mass spectrometry (THM-GC/MS). The C loss in the MPS forest soil, 2–12%, was smaller than that in the ABt and ABg forest soils, 20–37%, especially in the bottom layer. The higher C loss in the ABt and ABg soils, without significant difference between the top and bottom layers, can be attributed to the greater accumulation of less decomposed plant components as evidenced by the larger yields of lignin-derived phenols and polysaccharide-related compounds in THM-GC/MS analysis. The C composition as estimated by 13C NMR did not vary during incubation of the ABt and ABg soils while the yields of lignin-derived and other phenols as well as polysaccharide-related compounds in THM-GC/MS were decreased, especially in the top layer. These findings suggest that plant components with a low degree of decomposition are susceptible to drainage regardless of their structure. The progression of the oxidative degradation of lignin in the top layer of all soils was also suggested by the increases in PSI and the vanillic acid/vanillin ratio. The % O-alkyl C and % alkyl C may control the rate of C loss positively and negatively, respectively. PSI also appears to be useful for roughly estimating the decomposability of tropical peat SOM in various GWLs.

In the nuclear magnetic resonance (NMR) test of coal, when the spinning frequency of magic‐angle spinning (MAS) is less than the frequency range of chemical shift anisotropy, serious aromatic carbon spinning sidebands will appear. Existing solutions to the sideband effect, such as changing the MAS frequency, inserting total suppression of sidebands (TOSS) pulse sequences, or simply defining the peak after chemical shift of 200 ppm as the sideband peaks generated by aromatic carbon peak, multipling the identified sideband integral by 2 and adding to the main peaks of protonated aromatic carbon and aromatic bridgehead carbon. None of these methods can reasonably correct for the sideband effect and cause errors to accurately quantifying the carbon structure parameters. Compared with 13C nuclear magnetic resonance (13C NMR) spectrum without sideband suppression (13C CP‐MAS NMR) and 13C NMR spectrum under sideband suppression conditions (13C CP‐MAS/TOSS NMR), according to the chemical shifts of the main peaks of four aromatic carbons, namely protonated aromatic carbon, aromatic bridgehead carbon, alkylated aromatic carbon and oxygen‐linked aromatic carbon, combined with the MAS frequency, the first‐ and second‐level sideband peaks generated by four types of aromatic carbons were accurately located and quantified, and they were added to the corresponding aromatic carbon main peaks in 13C CP‐MAS/TOSS NMR spectrum, thus realizing the accurate correction of sideband effect of the solid‐state 13C NMR spectrum of coal samples. The relative area of corrected aliphatic carbon, carbonyl (carboxyl) carbon, and various aromatic carbons were recalculated, and more accurate carbon structure parameters were obtained, which is significant for studying the coal structure from a microscopic perspective. [ABSTRACT FROM AUTHOR]

A series of chlorophenyl thiazolyl naphthyl methanone derivatives have been synthesized and found to possess a wide spectrum of biological activities. Chlorophenyl thiazolyl naphthyl methanone has been synthesized and characterized by elemental analysis IR, ¹H and 13C NMR and mass spectral data. Quantum chemical computation and vibrational spectral analysis of chlorophenyl thiazolyl naphthyl methanone have been carried out using DFT level B3LYP with 6-31G basis set. Electric dipole moment (µ) values have been computed by utilizing ab initio and DFT quantum mechanical calculations. The energy gap is an indicator of chemical reactivity, kinetic stability and polarizability. The novel compounds show very good antioxidant and anticancer activity. Docking studies have been performed for target molecules using the molecular docking software. The antioxidant activity of chlorophenylthiazolylnaphthylmethanone has been analyzed using the DPPH radical scavenging assay. Among the studied compounds, (4-chlorophenyl-2-diethylaminothiazol-5-yl-2-naphthyl)methanone 2b is highly active on the SKMEL cell line. [ABSTRACT FROM AUTHOR]

Pollution of the Arctic Ocean by potentially toxic elements (PTEs) is a current environmental problem. Humic acids (HAs) play an important role in the regulation of PTE mobility in soil and water. The permafrost thaw releases ancient organic matter (OM) with a specific molecular composition into the Arctic watersheds. This could affect the mobility of PTEs in the region. In our study, we isolated HAs from two types of permafrost deposits: the Yedoma ice complex, which contains pristine buried OM, and the alas formed in the course of multiple thaw–refreezing cycles with the most altered OM. We also used peat from the non-permafrost region as the recent environmental endmember for the evolution of Arctic OM. The HAs were characterized using 13C NMR and elemental analysis. Adsorption experiments were conducted to assess the affinity of HAs for binding Cu2+ and Ni2+. It was found that Yedoma HAs were enriched with aliphatic and N-containing structures as compared to the much more aromatic and oxidized alas and peat HAs. The adsorption experiments have revealed that the peat and alas HAs have a higher affinity for binding both ions as compared to the Yedoma HAs. The obtained data suggest that a substantial release of the OM from the Yedoma deposits due to a rapid thaw of the permafrost might increase the mobility of PTEs and their toxicity in the Arctic Ocean because of much lesser "neutralization potential". [ABSTRACT FROM AUTHOR]

Cladanthus mixtus (L.) Chevall., Asteraceae, also known as Moroccan chamomile, is a spontaneous, annual plant growing wild in North-Western Morocco. Economically, the essential oil of C. mixtus is of high interest, Morocco being the only supplier on the international market. Two essential oil samples (EO) were isolated from aerial parts of Cladanthus mixtus (L.) Chevall., and analyzed by a combination of chromatographic and spectroscopic techniques (gas chromatography (GC) in combination with retention indices (RI), gas chromatography-mass spectrometry (GC/MS), and 13C NMR spectroscopy). Computer matching against the in-house 13C NMR library allowed the identification of the eight components at appreciable contents, namely 3,6,6,9-bis-epoxy-farnesa-1,7(14),10-triene, and its 3-epi, 9-epi, and 3,9-diepi epimers, and 6,9-epoxy-farnesa-1,7(14),10-trien-3-ol and its 3-epi, 6-epi, and 3,6-diepi epimers. Our results confirm the tremendous chemical variability of Moroccan C. mixtus essential oil and the usefulness of 13C NMR analysis, in combination with GC(RI), for the identification of uncommon oxygenated sesquiterpenes that induce an original composition. [ABSTRACT FROM AUTHOR]

Chicken feathers represent a viable material for producing biochar adsorbents. Traditional slow pyrolysis methods often result in sulfur element losses from chicken feathers, whereas hydrothermal reactions generate substantial amounts of nutrient-rich hydrothermal liquor. Magnesium-modified high-sulfur hydrochar MWF was synthesized through magnesium modification, achieving a S content of 3.68%. The maximum equilibrium adsorption amounts of MWF for Cd2+ and Pb2+ were 25.12 mg·g−1 and 70.41 mg·g−1, respectively, representing 4.00 times and 2.75 times of WF. Magnesium modification elevated the sulfur content, pH, ash content, and electronegativity of MWF. The primary mechanisms behind MWF’s adsorption of Cd2+ and Pb2+ involve magnesium ion exchange and complexation with C=O/O=C–O, quaternary N, and S functional groups. MWF maintains robust stability and antioxidative properties, even with low aromaticity levels. Given the lower energy consumption during hydrochar production, MWF offers notable carbon sequestration benefits. The hydrothermal solution derived from MWF is nutrient-rich. Following supplementation with inorganic fertilizer, the hydrothermal solution of MWF significantly enhanced bok choy growth compared to the control group. In general, adopting magnesium-modified hydrothermal reactions to produce hydrochar and converting the resultant hydrothermal solution into water-soluble fertilizer proves a viable strategy for the eco-friendly utilization of chicken feathers. This approach carries substantial value for heavy metal remediation and agricultural practices.

Since the discovery of the first ferroelectric liquid crystal (FLC) in the chiral smectic C (SmC*) phase, ferroelectricity in liquid crystals has attracted much attention due to not only the fundamental interest but also the applications. This review focuses on the evolution of the design concept for ferroelectric smectic liquid crystals. It progresses from considering macroscopic phase symmetry to designing intermolecular interactions. For the purpose of understanding the molecular organization in smectic phases, we propose a dynamic model of constituent molecules in the smectic A (SmA) and SmC* phases based on 13C NMR studies. Then, we follow the structure–property relationship in ferroelectric SmC* liquid crystals for FLC displays. We reconsider de Vries-like materials that can provide defect-free alignment. We pay attention to the electro-optical switching in the chiral de Vries smectic A phase. Finally, we show several liquid crystals exhibiting polar smectic A phases and discuss how the polar order occurs in the highest symmetric smectic A phase.

This study examines the influence of mefenamic acid on the physical and chemical properties of silica aerogels, as well as its effect on the sorption characteristics of the composite material. Solid state magic angle spinning nuclear magnetic resonance (MAS NMR) and high-pressure 13C NMR kinetic studies were conducted to identify the presence of mefenamic acid and measure the kinetic rates of CO2 sorption. Additionally, a high-pressure T1–T2 relaxation-relaxation correlation spectroscopy (RRCOSY) study was conducted to estimate the relative amount of mefenamic acid in the aerogel's pores, and a high-pressure nuclear Overhauser effect spectoscopy (NOESY) study was conducted to investigate the conformational preference of mefenamic acid released from the aerogel. The results indicate that mefenamic acid is affected by the chemical environment of the aerogel, altering the ratio of mefenamic acid conformers from 75% to 25% in its absence to 22% to 78% in the presence of aerogel. [ABSTRACT FROM AUTHOR]

There were some ecological and environmental problems in limestone soil in the karst peak-cluster depression in Pingguo City of Guangxi, such as the destruction of soil structure, soil acidification and soil fertility decline, and these problems were closely related to soil organic matter. The soil in this site was classified as Cambisols. Therefore, this project took soil under five major land uses (grassland, afforestation, sugarcane field, corn field and pitaya field) in the karst area of Guangxi as the research object. The contents and molecular structure properties of humic acids, fulvic acids and humins in soils were studied by solid-state 13C nuclear magnetic resonance spectroscopy and elemental composition. From the perspective of the chemical structure of humic substances, the differences in the quantity and structural characteristics of humic acids, fulvic acids and humins in different land uses were revealed. The results showed that the organic carbon content of both afforestation (34.83 g kg−1) and natural restored grassland (31.67 g kg−1) were significantly higher than that of sugarcane field (17.60 g kg−1), corn field (16.35 g kg−1) and pitaya field (14.31 g kg−1) (p < 0.05). The contents of three humic fractions in grassland were relatively high, and the contents of three humic fractions in sugarcane field were relatively low (p < 0.05). The structural characteristics of humic substances showed that the protein components of the three humic fractions in the afforestation were high, indicating that the humic substances in the afforestation contained more unstable components. The Alkyl C/O-alkyl C and Hydrophobic C/hydrophilic C ratios of the three humic fractions of corn field were high, indicating high stability and maturity in humic substances in corn field.

Understanding the molecular structure characteristics of coal from the molecular level is of great significance for realizing rational utilization and efficient transformation of coal. The molecular structure of coal samples from 1304 working face in No.13 coal seam of Hongyang No.2 Mine (HY) was studied by industrial analysis, elemental analysis, Nuclear magnetic resonance carbon spectroscopy (13C NMR) and Fourier transform infrared spectroscopy (FTIR). The results show that the aromatic compounds in coal samples of HY are mainly naphthalene ring structures. The aliphatic structure mainly consists of methyl, ethyl side chains and cycloalkanes. The ratio of aromatic bridge carbon to weekly carbon in molecular structure is 0.17. Oxygen atoms exist in the form of carbonyl, hydroxyl, and ether bonds, nitrogen atoms exist in the form of pyridine and pyrrole respectively, and sulfur atoms exist in the form of thiophene. Based on this, the planar structure model of coal macromolecule in HY is constructed, and its molecular formula is C129H88O29N2S, and its molecular weight is 2160. The structure optimization and annealing kinetics simulation of a single macromolecule model were carried out, and a stable three-dimensional coal model of HY was obtained. In addition, the oxygen absorption characteristics of coal samples in HY were studied by molecular dynamics and quantum chemistry. The results show that the adsorption capacity of the Wiser model is less than that of HY coal model. This is because, compared with the Wiser model, the content of oxygenated aliphatic hydrocarbons in the molecular structure of HY coal is higher, and the condensation degree of polycyclic aromatic hydrocarbons is lower. Due to the stronger physical adsorption capacity of hydroxyl, ether bond, and carbonyl on O2, HY Mine has stronger physical adsorption capacity on O2.

Condensed tannin copolymerized with hyperbranched tris(2-aminoethyl)amine-urea formed by amine-amido deamination yields a particleboard thermosetting adhesive without any aldehydes satisfying the requirements of relevant standards for the particleboard internal bond strength. The tannin–triamine–urea cures well at 180 °C, a relatively low temperature for today's particleboard hot pressing. As aldehydes were not used, the formaldehyde emission was found to be zero, not even in traces due to the heating of wood. The effect is ascribed to the presence of many reactive sites, such as amide, amino, and phenolic groups belonging to the three reagents used. The tannin appears to function as an additional cross-linking agent, almost a nucleating agent, for the triamine–urea hyperbranched oligomers. Chemical analysis by MALDI ToF and 13C NMR has shown that the predominant cross-linking reaction is that of the substitution of the tannin phenolic hydroxyls by the amino groups of the triamine. The reaction of tannin with the still-free amide groups of urea is rather rare, but it may occur with the rarer tannin flavonoid units in which the heterocyclic ring is opened. Due to the temperature gradient between the surfaces and the board core in the particleboard during hot pressing, the type and the relative balance of covalent and ionic bonds in the resin structure may differ in the surfaces and the board core. [ABSTRACT FROM AUTHOR]

The controversial question of whether optical rotation data can be used to distinguish floral from honeydew honey was investigated. Specific optical rotation angles were determined for 41 honey samples, including floral, honeydew, and adulterated honey, indicating that moderate to high positive optical rotation angles were found for all adulterated samples measured. A strong correlation between the sugar profile and the specific optical rotation angle of honey was confirmed, and a method based on 13C NMR metabolomics was proposed to calculate specific optical rotation angles with good correlation with the experimental values. The results indicate that optical rotation is not a reliable method for distinguishing the origin of honey but could indicate adulteration. [ABSTRACT FROM AUTHOR]

Dietary glucose and fructose are both efficiently assimilated by the liver but a comprehensive measurement of this process starting from their conversion to sugar phosphates, involvement of the pentose phosphate pathway (PPP), and conversion to glycogen and lipid storage products, remains incomplete. Mice were fed a chow diet supplemented with 35 g/100 mL drinking water of a 55/45 fructose/glucose mixture for 18 weeks. On the final night, the sugar mixture was enriched with either [U-13C]glucose or [U-13C]fructose, and deuterated water (2H2O) was also administered. 13C-isotopomers representing newly synthesized hepatic glucose-6-phosphate (glucose-6-P), glycerol-3-phosphate, and lipogenic acetyl-CoA were quantified by 2H and 13C NMR analysis of post-mortem liver glycogen and triglyceride. These data were applied to a metabolic model covering glucose-6-P, PPP, triose-P, and de novo lipogenesis (DNL) fluxes. The glucose supplement was converted to glucose-6-P via the direct pathway, while the fructose supplement was metabolized by the liver to gluconeogenic triose-P via fructokinase–aldolase–triokinase. Glucose-6-P from all carbohydrate sources accounted for 40–60% of lipogenic acetyl-CoA and 10–12% was oxidized by the pentose phosphate pathway (PPP). The yield of NADPH from PPP flux accounted for a minority (~30%) of the total DNL requirement. In conclusion, this approach integrates measurements of glucose-6-P, PPP, and DNL fluxes to provide a holistic and informative assessment of hepatic glucose and fructose metabolism. [ABSTRACT FROM AUTHOR]

The hydrazine derivatives are known to possess several biological activities including anticancer, antibacterial and anti-fungal, anticonvulsant, and antioxidant. This communication presents the synthesis, X-ray crystal structure analysis, DFT calculations, cell cytotoxicity, and antioxidant activity of the Schiff base 4,4′-((1E,1′E)-hydrazine-1,2-diylidenebis(ethan-1-yl-1-ylidene))bis(benzene-1,3-diol) (compound 2). We have also isolated the side product compound 1 and characterized it using single X-ray crystallography. The crystal structure of compound 1 depicts that the ensuing C–H···N hydrogen bonding interaction is presented and discussed herein. In addition, the calculations using density functional theory (DFT) approximation supported by experimental 1H and 13C NMR studies on the key compound 2 are reported. The results of theoretical and experimental 1H and 13C NMR were concordant. The antioxidant activity of compound 2 was determined by using 2,2′-azinobis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS•+) radical cation assays and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical assay. Compound 2 demonstrated excellent antioxidant activity in ABTS assay (IC50 = 4.30 ± 0.21 µM) and DPPH assay (IC50 = 81.06 ± 0.72 µM) with almost no cytotoxicity below 25 µM. [ABSTRACT FROM AUTHOR]

Benzimidazole is an important heterocyclic fragment, present in many biologically active compounds with a great variety of therapeutic purposes. Most of the benzimidazole activities are explained through the existence of 1,3-tautomeric equilibrium. As the binding affinity of each tautomer to a protein target depends on an established bioactive conformation, the effect of tautomers on the ligand protein binding mechanism is determinant. In this work, we searched and analyzed a series of reported 13C-NMR spectra of benzazoles and benzazolidine-2-thiones with the purpose of estimating their tautomeric equilibrium. Herein, several approaches to determine this problem are presented, which makes it a good initial introduction to the non-expert reader. This chemical shift difference and C4/C7 signals of benzimidazolidine-2-thione and 1-methyl-2-thiomethylbenzimidazole as references were used in this work to quantitatively calculate, in solution, the pyrrole–pyridine tautomeric ratio in equilibrium. The analysis will help researchers to correctly assign the chemical shifts of benzimidazoles and to calculate their intracyclic or exocyclic tautomeric ratio as well as mesomeric proportion in benzimidazoles. [ABSTRACT FROM AUTHOR]

Organosilicon compounds are one of the hot topics in research on electrolyte materials, with their physical and chemical properties standing as important parameters for measuring battery performance. In this paper, the structure of CN(CH2)2SiCH3(OCH2CH2OCH3)2(BNS), solvation effect, diffusion coefficient and thermal stability of LiPF6/BNS were analyzed and evaluated by various nuclear magnetic resonance (NMR) methods (i.e., 1H NMR, 13C NMR, DOSY, 7Li NMR and 19F NMR). It was observed that there was a solvation effect between BNS and LiPF6. Cyano (CN) and ether bond (-O-) groups in BNS may help to form complexes with Li+, and the coordination ability of CN is better than that of -O-. The formation of complex bond accelerated dissociation and diffusion of LiPF6, and also improved the thermal stability of electrolyte (LiPF6/BNS). It was proved that decomposition of LiPF6 at high temperature was the main cause of electrolyte failure. The results of this study provided a theoretical basis for the development of new electrolyte compounds and improvement of their performance.

Nuclear magnetic resonance (NMR) is an important characterization method for the depolymerization of lignocellulosic biomass and its structure evolution analysis. The accurate NMR analysis facilitates the selective transformation of different biomass components. In this review, the principles of NMR are presented. Four types of NMR experimental methods, including 1H NMR, 13C NMR, 31P NMR and 2D HSQC, and their applications in the structure elucidation, qualitative and quantitative analysis of products, reaction path and catalytic depolymerization mechanism of lignocellulose are mainly introduced. Finally, the main problems and perspectives of NMR method in valorization of lignocellulosic biomass are discussed.

Pure α- and β- isomers of 3, 22-dihydroxyhopane were obtained by the reduction of hydroxyl protected hydroxyhopanone with L-selectride. The absolute configuration of 3β, 22-hydroxyhopane was confirmed by single crystal X-ray diffraction, and the unambiguous 1H and 13C NMR data of two isomers were fully assigned for the first time. The preparation method is suitable for the separation of other unseparated α, β-isomers.

Agar is a hydrophilic biopolymer extracted from red seaweed. This phycocolloid consists of two components: agarose and agaropectin. In the present work, agar extracted from the invasive red seaweed Agarophyton vermiculophyllum was characterized using physical, chemical, and spectroscopic analyses to investigate the effect of alkaline pretreatment on agar properties. Two extraction conditions, native and alkali-pretreated agars, were comparatively studied. The native yield (28.4 ± 0.9%) was higher than that of the alkaline-pretreated agar (20.4 ± 0.8%). The alkali-pretreated agar showed higher gel strength (763.8 ± 57.0g cm−2), gelling (36.5 ± 0.9 °C), and melting (83.2 ± 0.6 °C) temperatures and increased 3,6-anhydrogalactose (26.2 ± 1.9%) and decreased sulfate contents (6.2 ± 0.8%) compared with native agar (gel strength: 204.8 ± 17.10g cm−2, gelling temperature: 29.5 ± 0.9 °C, melting temperature: 73.4 ± 0.7 °C, 3,6-AG content: 13.8 ± 0.7%, sulfate content: 10.5 ± 0.5%). The alkaline pretreatment improved the agar’s gelling properties and significantly influenced its chemical properties. In view of the obtained results, A. vermiculophyllum might potentially be thought of as a viable source for the agar industry in Morocco, serving as a local source of agar.