Search

Slippery surfaces are sought after due to their wide range of applications in self-cleaning, drag reduction, fouling-resistance, enhanced condensation, biomedical implants etc. Recently, non-textured, all-solid, slippery surfaces have gained significant attention because of their advantages over super-repellent surfaces and lubricant-infused surfaces. Currently, almost all non-textured, all-solid, slippery surfaces are hydrophobic. In this work, we elucidate the systematic design of non-textured, all-solid, slippery hydrophilic (SLIC) surfaces by covalently grafting polyethylene glycol (PEG) brushes to smooth substrates. Furthermore, we postulate a plateau in slipperiness above a critical grafting density, which occurs when the tethered brush size is equal to the inter-tether distance. Our SLIC surfaces demonstrate exceptional performance in condensation and fouling-resistance compared to non-slippery hydrophilic surfaces and slippery hydrophobic surfaces. Based on these results, SLIC surfaces constitute an emerging class of surfaces with the potential to benefit multiple technological landscapes ranging from thermofluidics to biofluidics.

Virtually all blood-contacting medical implants and devices initiate immunological events in the form of thrombosis and inflammation. Typically, patients receiving such implants are also given large doses of anticoagulants, which pose a high risk and a high cost to the patient. Thus, the design and development of surfaces with improved hemocompatibility and reduced dependence on anticoagulation treatments is paramount for the success of blood-contacting medical implants and devices. In the past decade, the hemocompatibility of super-repellent surfaces (i.e., surfaces that are extremely repellent to liquids) has been extensively investigated because such surfaces greatly reduce the blood-material contact area, which in turn reduces the area available for protein adsorption and blood cell or platelet adhesion, thereby offering the potential for improved hemocompatibility. In this review, we critically examine the progress made in characterizing the hemocompatibility of super-repellent surfaces, identify the unresolved challenges and highlight the opportunities for future research on developing medical implants and devices with super-repellent surfaces.

Hydrophilic solid surfaces having low contact angle hysteresis can induce stable dropwise condensation., Droplet nucleation and condensation are ubiquitous phenomena in nature and industry. Over the past century, research has shown dropwise condensation heat transfer on nonwetting surfaces to be an order of magnitude higher than filmwise condensation heat transfer on wetting substrates. However, the necessity for nonwetting to achieve dropwise condensation is unclear. This article reports stable dropwise condensation on a smooth, solid, hydrophilic surface (θa = 38°) having low contact angle hysteresis (

A series of experiments were conducted to characterize the anti-/de-icing performances of soft PDMS materials with different shear modulus and to explore their potentials for aircraft icing mitigation. In the present study, a new class of soft PDMS materials with adjustable shear modulus were fabricated by adding different amounts and different molecular weights of non-reactive trimethyl-terminated PDMS (t-PDMS) into the hydrosilylation mixture of vinyl-terminated PDMS (v-PDMS) and hydride-terminated PDMS (h-PDMS). While the soft PDMS materials were found to be hydrophobic with the contact angle of water droplets over the PDMS surfaces being about 110°, the ice adhesion strength over the soft PDMS materials was found to be extremely low (i.e., being less than 10 kPa at −5 °C or two orders of magnitude smaller), in comparison to those of the conventional rigid surface (i.e., being greater than 1000 kPa for Aluminum or the hard plastic material used to make the airfoil/wing model used in the present study). Upon the dynamic impacting of water droplets at relatively high weber number levels pertinent to aircraft inflight icing phenomena (e.g., We = 4000), the soft PDMS surfaces were found to deform dynamically due to the elastic nature of the PDMS materials, which cause the soft PDMS materials acting as “trampolines” to bounce off most of the impinged water mass away from the impacted surfaces. By applying the soft PDMS materials to coat/cover the surface of a NACA 0012 airfoil/wing model, an explorative study was also performed in an Icing Research Tunnel available at Iowa State University (i.e., ISU-IRT) to demonstrate the feasibility of using the soft PDMS materials to mitigate the impact ice accretion process pertinent to aircraft inflight icing phenomena.

Bacterial infections are a serious issue for many implanted medical devices. Infections occur when bacteria colonize the surface of an implant and form a biofilm, a barrier which protects the bacterial colony from antibiotic treatments. Further, the anti-bacterial treatments must also be tailored to the specific bacteria that is causing the infection. The inherent protection of bacteria in the biofilm, differences in bacteria species (gram-positive vs. gram-negative), and the rise of antibiotic-resistant strains of bacteria makes device-acquired infections difficult to treat. Recent research has focused on reducing biofilm formation on medical devices by modifying implant surfaces. Proposed methods have included antibacterial surface coatings, release of antibacterial drugs from surfaces, and materials which promote the adhesion of non-pathogenic bacteria. However, no approach has proven successful in repelling both gram-positive and gram-negative bacteria. In this study, we have evaluated the ability of superhydrophobic surfaces to reduce bacteria adhesion regardless of whether the bacteria are gram-positive or gram-negative. Although superhydrophobic surfaces did not repel bacteria completely, they had minimal bacteria attached after 24 h and more importantly no biofilm formation was observed.

Many small insects such as water striders can leap from water surface. Inspired by their jumping capability, we present the design of a novel, miniature, water surface jumping robot in this paper. Jumping from water surface is more challenging than jumping from ground due to the liquid water surface. We address this problem by using carbon fiber strip to store energy, two wings to flap the water surface, a hollow body to initially support the robot, and an intermittent gear train to charge and release energy. With such a design, the final robot weighs around 12.5 g and has a maximum size of 10 cm. Experimental results show that the robot can jump up to 9.5 cm in height, which is close to the predicted results from a dynamic model developed by us to capture the hydrodynamic behaviors of the robot during the whole jumping process. The research presented in this paper offers a new design of tiny robots for mimicking the water-jumping capability of aquatic insects. The robot, if equipped with sensors, can be employed for aquatic environmental monitoring of water quality.

Omniphobic membranes are attractive for membrane distillation (MD) because of their superior wetting resistance. However, a design framework for MD membrane remains incomplete, due to the complexity of omniphobic membrane fabrication and the lack of fundamental relationship between wetting resistance and water vapor permeability. Here we present a particle-free approach that enables rapid fabrication of monolithic omniphobic membranes for MD desalination. Our monolithic omniphobic membranes display excellent wetting resistance and water purification performance in MD desalination of hypersaline feedwater containing surfactants. We identify that a trade-off exists between wetting resistance and water vapor permeability of our monolithic MD membranes. Utilizing membranes with tunable wetting resistance and permeability, we elucidate the underlying mechanism of such trade-off. We envision that our fabrication method as well as the mechanistic insight into the wetting resistance-vapor permeability trade-off will pave the way for smart design of MD membranes in diverse water purification applications., Omniphobic membranes are attractive for membrane distillation because of their superior wetting resistance. Here the authors develop a particle-free approach for rapid fabrication of monolithic omniphobic membranes and elucidate the underlying mechanism of wetting resistance-vapor permeability trade-off in membrane distillation desalination.

The need to improve blood biocompatibility of medical devices is urgent. As soon as blood encounters a biomaterial implant, proteins adsorb on its surfaces, often leading to several complications such as thrombosis and failure of the device. Therefore, controlling protein adsorption plays a major role in developing hemocompatible materials. In this study, the interaction of key blood plasma proteins with superhemophobic titania nanotube substrates and the blood clotting responses was investigated. The substrate stability was evaluated and fibrinogen adsorption and thrombin formation from plasma were assessed using ELISA. Whole blood clotting kinetics was also investigated, and Factor XII activation on the substrates was characterized by an in vitro plasma coagulation time assay. The results show that superhemophobic titania nanotubes are stable and considerably decrease surface protein adsorption/Factor XII activation as well as delay the whole blood clotting, and thus can be a promising approach for designing blood contacting medical devices.

Superomniphobic surfaces with macrotextures allow coalescence-induced jumping of droplets at Ohnesorge number >1., When two liquid droplets coalesce on a superrepellent surface, the excess surface energy is partly converted to upward kinetic energy, and the coalesced droplet jumps away from the surface. However, the efficiency of this energy conversion is very low. In this work, we used a simple and passive technique consisting of superomniphobic surfaces with a macrotexture (comparable to the droplet size) to experimentally demonstrate coalescence-induced jumping with an energy conversion efficiency of 18.8% (i.e., about 570% increase compared to superomniphobic surfaces without a macrotexture). The higher energy conversion efficiency arises primarily from the effective redirection of in-plane velocity vectors to out-of-plane velocity vectors by the macrotexture. Using this higher energy conversion efficiency, we demonstrated coalescence-induced jumping of droplets with low surface tension (26.6 mN m−1) and very high viscosity (220 mPa·s). These results constitute the first-ever demonstration of coalescence-induced jumping of droplets at Ohnesorge number >1.

Objective The objective of this study is to evaluate the impact of superhydrophobic coating on the hemodynamics and turbulence characteristics of a bileaflet mechanical valve in the context of evaluating blood damage potential. Methods Two 3D printed bileaflet mechanical valves were hemodynamically tested in a pulse duplicator under physiological pressure and flow conditions. The leaflets of one of the two valves were sprayed with a superhydrophobic coating. Particle Image Velocimetry was performed. Pressure gradients (PG), effective orifice areas (EOA), Reynolds shear stresses (RSS) and instantaneous viscous shear stresses (VSS) were calculated. Results (a) Without SH coating, the PG was found to be 14.53 ± 0.7 mmHg and EOA 1.44 ± 0.06 cm2. With coating, the PG obtained was 15.21 ± 1.7 mmHg and EOA 1.39 ± 0.07 cm2; (b) during peak systole, the magnitude of RSS with SH coating (110Pa) exceeded that obtained without SH coating (40 Pa) with higher probabilities to develop higher RSS in the immediate wake of the leaflet; (c) The magnitudes range of instantaneous VSS obtained with SH coating were slightly larger than those obtained without SH coating (7.0 Pa versus 5.0 Pa). Conclusion With Reynolds Shear Stresses and instantaneous Viscous Shear Stresses being responsible for platelet damage, SH coating did not lead to their decrease. While SH coating is known to improve surface properties such as reduced platelet or clot adhesion, the relaxation of the slip condition does not necessarily improve overall hemodynamic performance for the bileaflet mechanical valve design.

Surfaces that display contact angles greater than 150° along with a low contact angle hysteresis for low surface tension liquids such as oils and alcohols are known as superoleophobic surfaces. Such surfaces are of interest for a diverse array of applications including self-cleaning, nonfouling, stain-free clothing and spill-resistant protective wear, drag reduction, microrobots for aqueous and chemical environments and icephobicity. Recently, significant advances have been made in understanding the criteria required to design superoleophobic surfaces. In this article, the authors discuss the roles of surface energy and roughness, the critical role of re-entrant texture and the role of hierarchical structure in fabricating superoleophobic surfaces. On the basis of this understanding, the authors also discuss two design parameters that allow for the systematic design of superoleophobic surfaces. The authors also summarize the recent studies on superoleophobic surfaces and emphasize the need for careful and diligent characterization. Finally, the authors conclude with the major challenges and opportunities for research on superoleophobic surfaces.

In this study, we explore how blood-material interactions and hemodynamics are impacted by rendering a clinical quality 25 mm St. Jude Medical Bileaflet mechanical heart valve (BMHV) superhydrophobic (SH) with the aim of reducing thrombo-embolic complications associated with BMHVs. Basic cell adhesion is evaluated to assess blood-material interactions, while hemodynamic performance is analyzed with and without the SH coating. Results show that a SH coating with a receding contact angle (CA) of 160° strikingly eliminates platelet and leukocyte adhesion to the surface. Alternatively, many platelets attach to and activate on pyrolytic carbon (receding CA = 47), the base material for BMHVs. We further show that the performance index increases by 2.5% for coated valve relative to an uncoated valve, with a maximum possible improved performance of 5%. Both valves exhibit instantaneous shear stress below 10 N/m2 and Reynolds Shear Stress below 100 N/m2. Therefore, a SH BMHV has the potential to relax the requirement for antiplatelet and anticoagulant drug regimens typically required for patients receiving MHVs by minimizing blood-material interactions, while having a minimal impact on hemodynamics. We show for the first time that SH-coated surfaces may be a promising direction to minimize thrombotic complications in complex devices such as heart valves.

hasexplainedhowre-entrantsurface texture, in conjunction with surface chemistry androughness, can be used to design superomniphobic surfaces.In this work, we report a simple, fast, and practical method-ology to develop patterned superomniphobic–superomni-philic surfaces that exhibit stark contrast in wettability witha wide range of polar and nonpolar liquids. Using thesesurfaces, we demonstrate the site-selective self-assembly ofheptane upon dipping and spraying on textured surfaces, site-selective condensation and boiling with low-surface-tensionliquids, and site-selective self-assembly of both polymers andmicroparticles.When a liquid comes in contact with a textured surface, itadopts either the fully wetted Wenzel

Hierarchically structured, superoleophobic surfaces are demonstrated that display one of the lowest contact angle hysteresis values ever reported - even with extremely low-surface-tension liquids such as n-heptane. Consequently, these surfaces allow, for the first time, even ≈2 μL n-heptane droplets to bounce and roll-off at tilt angles. ≤ 2°.

In this paper, a new approach for characterizing dispersion in nano-enhanced polymers and polymer composites using nanomechanical characterization is developed. Dispersion of Carbon nanofibers (CNFs) as a model nanoscale ingredient is characterized in two model polymer systems: (a) a thermoplastic polymer processed using a Twin Screw Extruder, and (b) a thermoset epoxy processed using sonication during solvent processing. For the first time, the modulus of agglomerated nanofibers was isolated from the polymer matrix enhanced with dispersed nanofibers by using nanomechanical characterization. Thus, it was possible to use these nanomechanical properties in a microstructural model using a Rule-of-Mixtures (ROM) formulation to determine the fraction of dispersed nanofibers, which yielded a dispersion limit of 3 vol% CNFs in the nano-enhanced thermoplastic polymer and 3.5 vol% CNFs in the nano-enhanced thermoset epoxy. It was also possible to predict the modulus measured using microtensile testing, and to determine an effective modulus of 30 GPa for the CNFs, which was attributed to a spring-like effect from kinking along the nanofibers. Applying this characterization to control of dispersion through sonication in the nano-enhanced thermoset epoxy, it was possible to determine the degree of dispersion with sonication time which was described using an Avrami equation. Finally, a carbon-fiber mat was used to create a model nano-enhanced polymer composite whose properties were found to be insensitive to sonication time due to filtering effects from the carbon-fiber mat and varied with CNF concentration in a manner where the CNF modulus could be extrapolated to 30 GPa, consistent with the nano-enhanced polymers.

Superhydrophobic surfaces (i.e., surfaces extremely repellent to water) allow water droplets to bead up and easily roll off from the surface. While a few methods have been developed to fabricate metallic superhydrophobic surfaces, these methods typically involve expensive equipment, environmental hazards, or multi-step processes. In this work, we developed a universal, scalable, solvent-free, one-step methodology based on thermal sensitization to create appropriate surface texture and fabricate metallic superhydrophobic surfaces. To demonstrate the feasibility of our methodology and elucidate the underlying mechanism, we fabricated superhydrophobic surfaces using ferritic (430) and austenitic (316) stainless steels (representative alloys) with roll off angles as low as 4° and 7°, respectively. We envision that our approach will enable the fabrication of superhydrophobic metal alloys for a wide range of civilian and military applications.

Superomniphobic surfaces are extremely repellent to virtually all liquids. By combining superomniphobicity and shape memory effect, metamorphic superomniphobic (MorphS) surfaces that transform their morphology in response to heat are developed. Utilizing the MorphS surfaces, the distinctly different wetting transitions of liquids with different surface tensions are demonstrated and the underlying physics is elucidated. Both ex situ and in situ wetting transitions on the MorphS surfaces are solely due to transformations in morphology of the surface texture. It is envisioned that the robust MorphS surfaces with reversible wetting transition will have a wide range of applications including rewritable liquid patterns, controlled drug release systems, lab-on-a-chip devices, and biosensors.

There is a critical need for new energy-efficient solutions to separate oil-water mixtures, especially those stabilized by surfactants. Traditional membrane-based separation technologies are energy-intensive and limited, either by fouling or by the inability of a single membrane to separate all types of oil-water mixtures. Here we report membranes with hygro-responsive surfaces, which are both superhydrophilic and superoleophobic, in air and under water. Our membranes can separate, for the first time, a range of different oil-water mixtures in a single-unit operation, with >99.9% separation efficiency, by using the difference in capillary forces acting on the two phases. Our separation methodology is solely gravity-driven and consequently is expected to be highly energy-efficient. We anticipate that our separation methodology will have numerous applications, including the clean-up of oil spills, wastewater treatment, fuel purification and the separation of commercially relevant emulsions.

In this work, the first-ever membrane-based single unit operation that enables gravity driven, on-demand separation of various oil-water mixtures is developed. Using this methodology, the on-demand separation of free oil and water, oil-in-water emulsions, and water-in-oil emulsions is demonstrated, with ≥99.9% separation efficiency. A scaled-up apparatus to separate larger quantities (several liters) of oil-water emulsions is also developed.

Multiple oil spill disasters over the last few years have highlighted the challenges of effective oil–water separation. The separation of oil–water micro- and nano-emulsions (emulsions with dispersed droplet sizes in the micro- or nano-meter range) can be particularly difficult.1, 2 Shi et al.3 from the Chinese Academy of Sciences in Suzhou and Beijing have now developed ultrathin carbon nanotube membranes that can separate a wide range of oil–water micro- and nano-emulsions with separation efficiency >99.9%. Perhaps more significantly, the separation fluxes are 2–3 orders of magnitude higher than those obtained with current commercially available separation membranes.