Search

An adaptive virtual-inductance feedforward scheme is presented in this article to enhance the stable operation of smart inverters in weak grids. In the developed scheme, the virtual inductance is updated in real time according to an adaptation law to ensure that the inverter follows the dynamic response of a robust reference model, thereby ensuring stability without the need for any grid impedance estimation. In this article, the developed scheme is validated with experimental results obtained from testing a small-scale two-level, 208-V, 2-kW inverter.

Traditionally, a grid-interactive inverter providing ancillary services is called a smart inverter. However, broader features will be required for the next generation of inverters that can be categorized as self-governing, self-adapting, self-security, and self-healing. For grid-interactive inverters, the self-governing feature can be identified as the capability of inverters to operate in grid-following and grid-forming control modes, where the self-adapting is referred to as more flexibility realized by adaptive controllers for stable dynamics of inverters under various grid conditions. Moreover, for supervisory control and economic dispatch in a grid with high-penetration of inverter-based power generators, a minimum communication might be necessary, but it can place grid-interactive inverters in danger of being hacked when self-security becomes essential to identify malicious setpoints. Furthermore, the self-healing is defined as fault-tolerance and stress reduction under abnormal conditions. It suggests that after realizing these features, an inverter is called a smart inverter. In this paper, the advancements toward achieving these features for grid-interactive inverters are reviewed.

In this paper, a feedforward virtual inductance control strategy is developed for the stability of voltage source inverters (VSIs) in weak grids. A weak grid is characterized by a low short-circuit ratio and a low inertia constant, in which VSIs become susceptible to voltage distortions and instability. The proposed feedforward virtual inductance term is integrated into the current control loops of grid-tied VSIs. In this paper, the effectiveness of the virtual inductance control strategy in weak grids is first proved through closed-loop transfer function analysis and then the system's root locus analysis to determine the stability region of the system versus the grid impedance. The developed virtual inductance controller is also verified through laboratory experiments for different weak grid scenarios.

DC stacked topologies have gained popularity for interfacing individual photovoltaic panels to a high-voltage DC bus. A similar approach can be used to interface individual battery packs to the same DC bus, which allows active balancing of battery substrings and the use of lower voltage switches. Any imbalance in battery current, however, can cause the converter output voltages to diverge. This paper describes the source of voltage divergence and demonstrates a solution that allows seamless stacking of multiple battery packs to be interfaced to a high voltage DC bus. To prevent the voltage divergence phenomenon and allow asymmetrical battery charging for efficient battery state of charge management, the PI-based decentralized voltage control enabling both capacitor voltage sharing and asymmetrical capacitor voltage control is proposed. The effectiveness of the decentralized voltage control strategy is demonstrated through controller hardware-in-the-loop test results.

The growth in load and generation sources at the edge of the grid is driving the innovation in power electronic (PE) grid interfaces at the consumer end to improve the grid resiliency, reliability, security, and cost of the future infrastructure. Novel PE technologies are key enablers for the future grid infrastructure to handle the issues that arise because of the projected growth. This paper introduces a novel fundamental building block (FBB) architecture with plug-and play features. An example framework that enables co-ordination of multiple FBBs hierarchically to provide various grid functions is also presented. The FBBs are designed to be equipped with advanced features like online health monitoring, embedded intelligence, and decision-making capability for enhancing the metrics of consumer end plug and play interfaces. The paper elaborates on the proposed architecture and the developed framework i.e., the controls, communication, protection, and the corresponding timing requirements for the building blocks. The architecture and the framework have been validated through simulations and the communication framework has been validated with a control hardware in the loop platform.

Grid-interactive inverters allow distributed generation units to provide various ancillary services in microgrids. As the linear modulation region of inverters is restricted by the dc-bus voltage, providing ancillary services may drive the fundamental positive-sequence inverter voltage to the overmodulation region. Therefore, to operate in the linear modulation region the maximum active- and reactive-power of the inverter may have to be reduced unless pulsewidth modulation (PWM) references are adjusted. In this paper, an atypical PWM method is proposed for maximizing dc-bus utilization of grid-interactive two-level voltage source inverters (2L-VSI) providing ancillary services. Two important ancillary services, i.e., negative-sequence compensation and harmonic compensation are considered in this paper. The proposed method increases the maximum active- and reactive-power that a 2L-VSI can deliver when providing ancillary services by injecting a common-mode component in the references computed based on instantaneous reference magnitudes. The validity of the proposed technique is verified through simulation, as well as experimental data obtained using a 208-V three phase grid-connected 2L-VSI.