Search

Novel observations of aerosol and clouds by means of ground-based remote sensing have been performed in Antarctica over the Ekstrom Ice Shelf on the coast of Dronning Maud Land at Neumayer Station III (70.67[degrees]S, 8.27[degrees]W) from January to December 2023. The deployment of the OCEANET-Atmosphere remote sensing observatory in the framework of the Continuous Observations of Aerosol-Cloud Interaction (COALA) campaign has brought Aerosol, Clouds and Trace Gases Research Infrastructure (ACTRIS) aerosol and cloud profiling capabilities next to meteorological and air chemistry in situ observations at the Antarctic station. We present an overview of the site, the instrumental setup, and data analysis strategy and introduce 3 scientific highlights from austral fall and winter, namely, 1) observations of a persistent mixed-phase cloud embedded in a plume of marine aerosol. Remote sensing-based retrievals of cloud-relevant aerosol properties and cloud microphysical parameters confirm that the free-tropospheric mixed-phase cloud layer formed in an aerosol-limited environment. 2) Two extraordinary warm air intrusions: one with intense snowfall produced the equivalent of 10% of the yearly snow accumulation and a second one with record-breaking maximum temperatures and heavy icing due to supercooled drizzle. 3) Omnipresent aerosol layers in the stratosphere. Our profiling capabilities could show that 50% of the 500-nm aerosol optical depth of 0.06 was caused by stratospheric aerosol, while the troposphere was usually pristine. As demonstrated by these highlights, the 1-yr COALA observations will serve as a reference dataset for the vertical structure of aerosol and clouds above the region, enabling future observational and modeling studies to advance understanding of atmospheric processes in Antarctica. KEYWORDS: Antarctica; Ice shelves; Aerosols; Clouds; Remote sensing; Aerosol-cloud interaction, 1. Introduction The Antarctic continent and its surrounding Southern Ocean are key components of the global climate system. Having been considered rather stable over the last century, the climate of [...]

Between 14 March and 21 April 2022, an extensive investigation of an extraordinary Saharan dust intrusion over Europe was performed based on lidar measurements obtained by the European Aerosol Research Lidar Network (EARLINET). The dust episode was divided into two distinct periods, one in March and one in April, characterized by different dust transport paths. The dust aerosol layers were studied over 18 EARLINET stations, examining aerosol characteristics during March and April in four different regions (M-I, M-II, M-III, and M-IV and A-I, A-II, A-III, and A-IV, respectively), focusing on parameters such as aerosol layer thickness, center of mass (CoM), lidar ratio (LR), particle linear depolarization ratio (PLDR), and Ångström exponents (ÅE). In March, regions exhibited varying dust geometrical and optical properties, with mean CoM values ranging from approximately 3.5 to 4.8 km, and mean LR values typically between 36 and 54 sr. PLDR values indicated the presence of both pure and mixed dust aerosols, with values ranging from 0.20 to 0.32 at 355 nm and 0.24 to 0.31 at 532 nm. ÅE values suggested a range of particle sizes, with some regions showing a predominance of coarse particles. Aerosol Optical Depth (AOD) simulations from the NAAPS model indicated significant dust activity across Europe, with AOD values reaching up to 1.60. In April, dust aerosol layers were observed between 3.2 to 5.2 km. Mean LR values typically ranged from 35 to 51 sr at both 355 nm and 532 nm, while PLDR values confirmed the presence of dust aerosols, with mean values between 0.22 and 0.31 at 355 nm and 0.25 to 0.31 at 532 nm. The ÅE values suggested a mixture of particle sizes. The AOD values in April were generally lower, not exceeding 0.8, indicating a less intense dust presence compared to March. The findings highlight spatial and temporal variations in aerosol characteristics across the regions, during the distinctive periods. From 15 to 16 March 2022, Saharan dust significantly reduced UV-B radiation by approximately 14% over the ATZ station (Athens, GR). Backward air mass trajectories showed that the dust originated from the Western and Central Sahara when, during this specific case, the air mass trajectories passed over GRA (Granada, ES) and PAY (Payerne, CH) before reaching ATZ, maintaining high relative humidity and almost stable aerosol properties throughout its transport. Lidar data revealed elevated aerosol backscatter (baer) and PLDR values, combined with low LR and ÅE values, indicative of pure dust aerosols. [ABSTRACT FROM AUTHOR]

Marine aerosol affects the global energy budget and regional weather. The production of marine aerosol is primarily driven by wind at the sea–air interface. Previous studies have explored the effects of wind on marine aerosol, mostly by examining the relationships between aerosol optical depth (AOD) and surface wind speed. In this paper, utilizing the synergy of aerosol and wind observations from Aeolus, the relationships between the marine aerosol optical properties at 355 nm and the instantaneous co-located wind speeds of remote oceans are investigated at two vertical layers (within and above the marine atmospheric boundary layer (MABL)). The results show that the enhancements of the extinction and backscatter coefficients caused by wind are larger within the MABL than above it. The correlation models between extinction and backscatter with wind speed were established using power-law functions. The slope variation points occur during extinction and backscatter coefficients increasing with wind speed, indicating that the wind-driven enhancement of marine aerosol involves two phases: a rapid-growth phase with high wind dependence, followed by a slower-growth phase after the slope variation points. We also compared the AOD–wind relationship acquired from Aeolus with CALIPSO-derived results from previous research. The variation in the lidar ratio with wind speed is examined, suggesting a possible "increasing–decreasing–increasing" trend of marine aerosol particle size as wind speed increases. This study enhances the comprehension of the correlation between marine aerosol optical properties and wind speed by providing vertical information and demonstrating that their relationships are more complex than a linear or exponential relation. [ABSTRACT FROM AUTHOR]

In this study, we present a new approach for the determination of polarization parameters of the Nicosia Cimel CE376 lidar system, using the Polly XT in Limassol as a reference instrument. The method is applied retrospectively to the measurements obtained during the 2021 Cyprus Fall Campaign. Lidar depolarization measurements represent valuable information for aerosol typing and for the quantification of some specific aerosol types such as dust and volcanic ash. An accurate characterization is required for quality measurements and to remove instrumental artifacts. In this article, we use the Polly XT , a widely used depolarization lidar, as our reference to evaluate the CE376 system's gain ratio and channel cross-talk. We use observations of transported dust from desert regions for this approach, with layers in the free troposphere. Above the boundary layer and the highest terrain elevation of the region, we can expect that, for long-range transport of aerosols, local effects should not affect the aerosol mixture enough for us to expect similar depolarization properties at the two stations (separated by ∼ 60 km). Algebraic equations are used to derive polarization parameters from the comparison of the volume depolarization ratio measured by the two systems. The applied methodology offers a promising opportunity to evaluate the polarization parameters of a lidar system, in cases where a priori knowledge of the cross-talk parameters is not available, or to transfer the polarization parameters from one system to the other. [ABSTRACT FROM AUTHOR]

This study introduces a novel methodology for the characterization of atmospheric aerosol based on lidar-derived intensive optical properties. The proposed aerosol-typing scheme is based on the optimal estimation method (OEM) and allows the identification of up to four different aerosol components of an aerosol mixture, as well as the quantification of their contribution to the aerosol mixture in terms of relative volume. The four aerosol components considered in this typing scheme are associated with the most commonly observed aerosol particles in nature and are assumed to be physically separated from each other and, therefore, can create external mixtures. Two components represent absorbing and less-absorbing fine-mode particles, and the other two components represent spherical and non-spherical coarse-mode particles. These components reflect adequately the most frequently observed aerosol types in the atmosphere: combustion- and pollution-related aerosol, sea salt, and desert dust, respectively. In addition, to consolidate the calibration and validation efforts for the upcoming EarthCARE mission, the typing scheme proposed here is in accordance with the Hybrid End-To-End Aerosol Classification (HETEAC) model of EarthCARE. The lidar-derived optical parameters used in this typing scheme are the lidar ratio and the particle linear depolarization ratio at two distinct wavelengths (355 and 532 nm), the backscatter-related color ratio for the wavelength pair of 532/1064 nm and the extinction-related Ångström exponent for the wavelength pair of 355/532 nm. These intensive optical properties can be combined in different ways, making the methodology flexible, thus allowing its application to lidar systems with different configurations (e.g., single wavelength or multiwavelength, Raman, high spectral resolution). The typing scheme was therefore named HETEAC-Flex due to its compatibility with EarthCARE's HETEAC and its methodological flexibility. The functionality of the typing scheme is demonstrated by its application to three case studies based on layer-averaged optical properties. [ABSTRACT FROM AUTHOR]

The number of intense wildfires may increase further in upcoming years as a consequence of climate change. It is therefore necessary to improve our knowledge about the role of smoke in the climate system, with emphasis on the impact of smoke particles on the evolution of clouds, precipitation, and cloud radiative properties. Presently, one key aspect of research is whether or not wildfire smoke particles can initiate cirrus formation. In this study, we present lidar observations over Limassol, Cyprus, from 27 October to 3 November 2020, when extended wildfire smoke fields crossed the Mediterranean Basin from Portugal to Cyprus. We found strong evidence that aged smoke (organic aerosol particles) originating from wildfires in North America triggered significant ice nucleation at temperatures from -47 to -53 ∘ C and caused the formation of extended cirrus layers. The observations suggest that the ice crystals were nucleated just below the tropopause in the presence of smoke particles serving as ice-nucleating particles (INPs). The main part of the 2–3 km thick smoke layer was, however, in the lower stratosphere just above the tropopause. With actual radiosonde observations of temperature and relative humidity and lidar-derived smoke particle surface area concentrations used as starting values, gravity wave simulations show that the lofting of air by 100–200 m is sufficient to initiate significant ice nucleation on the smoke particles, leading to ice crystal number concentrations of 1–100 L -1. [ABSTRACT FROM AUTHOR]

From 19 September to 13 December 2021, volcanic eruptions took place at the Cumbre Vieja ridge, Las Palmas, Canary Islands. Thereby, fine ash and volatiles, like sulfur dioxide (SO2), were emitted and transported over hundreds to thousands of kilometers away from the island. Continuous lidar observations with the multiwavelength-Raman-polarization lidar PollyXT were performed at the Ocean Science Center at Mindelo, Cabo Verde, in the framework of the Joint Aeolus-Tropical Atlantic Campaign (JATAC) 2021/2022 enabling the characterization of the atmospheric state above Mindelo during the eruption period. A special feature of the system operated at Mindelo is, that measurements of the particle extinction coefficient, the particle extinction-to-backscatter ratio (lidar ratio) and the particle linear depolarization ratio are available at all three wavelengths (355, 532 and 1064 nm). The typical aerosol conditions over Mindelo are a clean marine planetary boundary layer (PBL) up to approx. 1 km and above a Saharan dust layer (SAL, up to 6 km) during northern hemispheric summer and fall. A particle extinction coefficient smaller than 200 Mm−1, a lidar ratio smaller than 30 sr and a particle linear depolarization ratio close to 0 % have been typically observed within the planetary boundary layer, while a lidar ratio between 40 and 60 sr and a linear depolarization ratio between 20 and 30 % are characteristic for the SAL above. In contrast, during the time of the volcanic eruptions, a strongly polluted PBL was observed on specific days beginning on the 23 September 2021, whereby the particle extinction coefficient and the lidar ratio increased up to 800 Mm−1 and 80 sr (at 355 nm), respectively. On 24 September, the aerosol optical depth, determined by an AERONET (Aerosol Robotic Network) sun photometer, was as high as 0.9 and 1.1 (daily averages at 500 and 340 nm). HYSPLIT (Hybrid Single-Particle Lagrangian Integrated Trajectory) trajectories indicate air mass transport from Canary Islands to Mindelo at heights below 2 km. The observed pollution in the PBL over Mindelo is attributed to sulfate aerosol from the volcanic eruption at Las Palmas as the particle linear depolarization ratio was low (≤ 3 %) and, thus, does not indicate non-spherical particles, such as Saharan dust or volcanic ash. We thus conclude that sulfate aerosol formed from gaseous precursors during the transport (2–3 days for a distance of 1500 km) from Las Palmas towards Cabo Verde. No indications of volcanic ash over Mindelo were found in the SAL. This finding is supported by the HYSPLIT trajectories, which show that air masses in higher altitudes originate from the African continent and not from the Canary Islands. [ABSTRACT FROM AUTHOR]

On 22nd August 2018, the European Space Agency (ESA) launched the first direct detection Doppler wind lidar into space. Operating at 355 nm and acquiring signals with a dual channel receiver, it allows wind observations in clear air and particle-laden regions of the atmosphere. Furthermore, particle optical properties can be obtained using the High Spectral Resolution Technique Lidar (HSRL) technique. Measuring with 87 km horizontal and 0.25-2 km vertical resolution between ground and up to 30 km in the stratosphere, the global coverage of Aeolus observations shall fill gaps in the global observing system and thus help improving numerical weather prediction. Within this contribution, first results from the German initiative for experimental Aeolus validation are presented and discussed. Ground-based wind and aerosol measurements from tropospheric radar wind profilers, Doppler wind lidars, radiosondes, aerosol lidars and cloud radars are utilized for that purpose.

We present smoke lidar measurements from the Canadian fires of 2017. The advected smoke layers over Europe are detected at both tropospheric and stratospheric heights, with the latter presenting non-typical values of the Particle Linear Depolarization Ratio (PLDR) with strong wavelength dependence from the UV to the Near-IR. Specifically, the PLDR values are of the order of 22, 18 and 4% at 355, 532 and 1064 nm respectively. In an attempt to interpret these results, we apply the hypothesis that smoke particles have near-spherical shapes. Scattering calculations with the T-matrix code support other findings in the literature ([1]- [2]), showing that the near-spherical shape (or closely similar shapes as in [2]), is the only shape that has been shown to reproduce the observed PLDR and Lidar Ratio (LR) values of the stratospheric smoke particles at the three measurement wavelengths.

Vertically resolved multiwavelength aerosol Raman lidar observations were conducted in the pristine environment of the Southern-hemisphere midlatitudes at Punta Arenas, Chile (53.1346°S, 70.8834°W). In contrast to the usually prevailing clean and pristine conditions at this site, two pronounced lofted aerosol layers were observed up to 4.2 and 4.4 km height on 4 and 5 February 2019, respectively. The layers mainly consisted of biomass burning aerosols originating from the region of Central Chile, where wildfires were also observed. Based on spectrally resolved backscatter and extinction coefficients, lidar ratios and depolarization ratio a detailed characterization of the aerosol optical properties is presented.

The biomass burning events are analyzed using the EARLINET-ACTRIS atmospheric profiling of aerosols using lidars. The period of 2008-2017 was chosen to analyze all the events assigned in the EARLINET database under Forest Fire category. A number of fourteen stations were considered. The data provided, ranged from complete data sets (backscatter, extinction and particle linear depolarization ratio) to single profiles (backscatter coefficient). A thorough quality control was performed. Smoke layers geometry was evaluated and the mean properties within each layer were computed. The Hysplit backward-trajectory technique and the FIRMS fire database were used to double check the source of each layer. Discussions were made under the following scenarios: fire events seen by two stations, long range transport from North America, and geographical clusters.

A new version of automatic lidar calibration and processing program was developed to process the data from multiwavelength Raman polarization lidar. The absolute lidar calibration and water vapor calibration algorithms were applied. The program can provide plentiful products, like aerosol backscatter and extinction coefficients, lidar ratio, Ångström exponent, volume and particle depolarization ratios, water vapor mixing ratio and aerosol target classification. Good agreement was found in the comparison with manual quality-assured profiles or radiosonde measurement. Lidar calibration based on the aerosol optical properties retrieved with Raman method, Klett method and AOD-Constrained method were implemented. Good consistency was found.

Canadian wildfire smoke was detected in the troposphere and lower stratosphere over Europe in August and September 2017. Lidar measurements from various stations of the European Aerosol Research Lidar Network (EARLINET) observed the stratospheric smoke layer. Triple-wavelength (355, 532, and 1064 nm) lidar measurements of the depolarization and the lidar ratio are reported from Leipzig, Germany. The particle linear depolarization ratio of the wildfire smoke in the stratosphere had an exceptional strong wavelength dependence reaching from 0.22 at 355 nm, to 0.18 at 532 nm, and 0.04 at 1064 nm. The lidar ratio increased with wavelength from 40±16 sr at 355 nm, to 66±12 sr at 532 nm, and 92±27 sr at 1064 nm. The development of the stratospheric smoke plume over several months was studied by long-term lidar measurements in Cyprus. The stratospheric smoke layers increased in altitude up to 24 km height.

The paper presents the preliminary results of the lidar&radiometer measurement campaign (LRMC-2017), estimation of statistical relations between aerosol mode concentrations retrieved from CALIOP and ground-based lidar stations and case study of fire smoke events in the Eurasian regions using combined ground-based and space lidar and radiometer observations.

Tajikistan is often affected by atmospheric mineral dust originating from various surrounding deserts. The direct and indirect radiative effects of that dust play a sensitive role in the Central Asian climate system and therefore need to be quantified. The Central Asian Dust Experiment (CADEX) provides for the first time an aerosol climatology for Central Asia based long-term aerosol profiling by ground-based lidar (PollyXT type) in Dushanbe, Tajikistan. For pure dust cases, mean depolarization(lidar) ratios of 0.23±0.03(44±3 sr) at 355 nm and 0.32±0.02(38±3 sr) at 532 nm wavelength have been measured. The mean extinction-related Ångström exponent was 0.18±0.15.

Mineral dust aerosols are composed from a complex assemblage of various minerals depending on the region they originated. Giving the different mineral composition of desert dust aerosols, different physico-chemical properties and therefore varying climate effects are expected. Despite the known regional variations in mineral composition, chemical transport models typically assume that mineral dust 5 aerosols have uniform composition. This study adds, for the first time, mineralogical information to the mineral dust emission scheme used in the chemical transport model COSMO-MUSCAT. We provide a detailed description of the implementation of the mineralogical database, GMINER (Nickovic et al., 2012), together with a specific set of physical parametrizations in the model's mineral dust emission module. These changes lead to a general improvement of the model performance when comparing the simulated mineral dust aerosols with measurements over the Sahara Desert region for January - February 2022 . 10 The simulated mineral dust aerosol vertical distribution is tested by a comparison with aerosol lidar measurements from the lidar system PollyXT, located at Cape Verde. For a lofted mineral dust aerosol layer on the 2 February 5:00 UTC the lidar retrievals yield on a dust mass concentration peak of 156 µg/m³ while the model calculates the mineral dust peak at 136 µg/m³. The results highlight the possibility of using the model with resolved mineral dust composition for interpretation of the lidar measurements since higher absorption the UV-VIS wavelength is correlated to particles having higher hematite 15 content. Additionally, the comparison with in-situ mineralogical measurements of dust aerosol particles show how important they are, but also that more of them are needed for model evaluation. [ABSTRACT FROM AUTHOR]

The high-spectral-resolution Atmospheric Lidar (ATLID) on the Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) provides vertically resolved information on aerosols and clouds with unprecedented accuracy. Together with the Cloud Profiling Radar (CPR), the Multi-Spectral Imager (MSI), and the Broad-Band Radiometer (BBR) on the same platform, it allows for a new synergistic view on atmospheric processes related to the interaction of aerosols, clouds, precipitation, and radiation at the global scale. This paper describes the algorithms for the determination of cloud top height and aerosol layer information from ATLID Level 1b (L1b) and Level 2a (L2a) input data. The ATLID L2a Cloud Top Height (A-CTH) and Aerosol Layer Descriptor (A-ALD) products are developed to ensure the provision of atmospheric layer products in continuation of the heritage from the Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO). Moreover, the products serve as input for synergistic algorithms that make use of data from ATLID and MSI. Therefore, the products are provided on the EarthCARE joint standard grid (JSG). A wavelet covariance transform (WCT) method with flexible thresholds is applied to determine layer boundaries from the ATLID Mie co-polar signal. Strong features detected with a horizontal resolution of 1 JSG pixel (approximately 1 km) or 11 JSG pixels are classified as thick or thin clouds, respectively. The top height of the uppermost cloud layer together with information on cloud layering are stored in the A-CTH product for further use in the generation of the ATLID-MSI Cloud Top Height (AM-CTH) synergy product. Aerosol layers are detected as weaker features at a resolution of 11 JSG pixels. Layer-mean optical properties are calculated from the ATLID L2a Extinction, Backscatter and Depolarization (A-EBD) product and stored in the A-ALD product, which also contains the aerosol optical thickness (AOT) of each layer, the stratospheric AOT, and the AOT of the entire atmospheric column. The latter parameter is used to produce the synergistic ATLID-MSI Aerosol Column Descriptor (AM-ACD) later in the processing chain. Several quality criteria are applied in the generation of A-CTH and A-ALD, and respective information is stored in the products. The functionality and performance of the algorithms are demonstrated by applying them to common EarthCARE test scenes. Conclusions are drawn for the application to real-world data and the validation of the products after the launch of EarthCARE. [ABSTRACT FROM AUTHOR]

Ground-based observations of horizontal winds have been performed at Leipzig (51.35 ∘ N, 12.43 ∘ E), Germany, and at Punta Arenas (53.15 ∘ S, 70.91 ∘ W), Chile, in the framework of the German initiative EVAA (Experimental Validation and Assimilation of Aeolus observations) with respect to the validation of the Mie and Rayleigh wind products of Aeolus (L2B data). In Leipzig, at the Leibniz Institute for Tropospheric Research (TROPOS), radiosondes have been launched for the Aeolus overpasses on each Friday (ascending orbit) since the middle of May 2019. In Punta Arenas, scanning Doppler cloud radar observations have been performed in the framework of the DACAPO-PESO campaign (dacapo.tropos.de) for more than 3 years from the end of 2018 until the end of 2021 and could be used to validate Aeolus measurements on its ascending and descending orbits. We present two case studies and long‐term statistics of the horizontal winds derived with the ground-based reference instruments compared to Aeolus horizontal line-of-sight (HLOS) winds. The wind products of Aeolus considered are the Mie cloudy and Rayleigh clear products. It was found that the deviation of the Aeolus HLOS winds from the ground reference is usually of Gaussian shape, which allowed the use of the median bias and the scaled median absolute deviation (MAD) for the determination of the systematic and random errors of Aeolus wind products, respectively. The case study from August 2020 with impressive atmospheric conditions at Punta Arenas shows that Aeolus is able to capture strong wind speeds of up to more than 100 m s -1. The long-term validation was performed in Punta Arenas covering the period from December 2018 to November 2021 and in Leipzig from May 2019 until September 2022. This analysis showed that the systematic error of the Aeolus wind products could be significantly lowered during the mission lifetime with the changes introduced into the processing chain (different versions are called baselines). While in the early mission phase, systematic errors of more than 2 m s -1 (absolute values) were observed for both wind types (Mie and Rayleigh), these biases could be reduced with the algorithm improvements, such as the introduction of the correction for temperature fluctuations at the main telescope of Aeolus (M1 temperature correction) with Baseline 09. Hence, since Baseline 10, a significant improvement in the Aeolus data was found, leading to a low systematic error (close to 0 m s -1) and similar values for the midlatitudinal sites in both hemispheres. The random errors for both wind products were first decreasing with an increasing baseline but later increasing again due to performance losses of the Aeolus lidar instrument. Nevertheless, no significant increase in the systematic error in the Aeolus wind products was found. Thus, one can conclude that the uncertainty introduced by the reduced atmospheric return signal received by Aeolus mostly affects the random error. Even when considering all the challenges during the mission, we can confirm the general validity of Aeolus observations during its lifetime. Therefore, this space explorer mission could demonstrate that it is possible to perform active wind observations from space with the applied technique. [ABSTRACT FROM AUTHOR]

Vertical profiles of number concentrations of dust particles relevant for ice nucleation in clouds are derived from lidar measurements. The results are compared to coincidental airborne in-situ measurements of particle number and surface area concentrations in the dust layer. The observations were performed in long- range transported Saharan dust at Barbados and Asian dust at Cyprus. The Asian dust data analysis is ongoing. A comparison of Asian and Saharan dust will be given at the conference. Concentrations of ice nucleating particles in the order of 10 to 1000 per cm-3 in the dust layer are derived for a temperature of -25°C at Barbados. The method can be used to continuously monitor the concentration of ice nucleating dust particles vertically resolved from lidar measurements.

During the 18-month Central Asian Dust Experiment we conducted continuous lidar measurements at the Physical Technical Institute of the Academy of Sciences of Tajikistan in Dushanbe between 2015 and 2016. Mineral dust plumes from various source regions have been observed and characterized in terms of their occurrence, and their optical and microphysical properties with the Raman lidar PollyXT. Currently a new container-based lidar system is constructed which will be installed for continuous long-term measurements in Dushanbe.

Mineral dust influences climate and weather by direct and indirect effects. Surrounded by dust sources, Central Asian countries are affected by atmospheric mineral dust on a regular basis. Climate change effects like glacier retreat and desertification are prevalent in Central Asia as well. Therefore, the role of dust in the climate system in Central Asia needs to be clarified and quantified. During the Central Asian Dust EXperiment (CADEX) first lidar observations in Tajikistan were conducted. Long-term vertically resolved aerosol measurements were performed with the multiwavelength polarization Raman lidar PollyXT from March 2015 to August 2016 in Dushanbe, Tajikistan. In this contribution, a climatology of the aerosol layer heights is presented, which was retrieved from the 18-month lidar measurements. Automatic detection based on backscatter coefficient thresholds were used to retrieve the aerosol layer heights and yield similar layer heights as manual layer height determination. The significant aerosol layer height has a maximum in summer and a minimum in winter. The highest layers occurred in spring, but in summer uppermost layer heights above 6 km AGL are frequent, too.

We present the first attempt of a closure experiment regarding the relationship between ice nucleating particle concentration (INPC) and ice crystal number concentration (ICNC), solely based on active remote sensing. The approach combines aerosol and cloud observations with polarization lidar, Doppler lidar, and cloud radar. Several field campaigns were conducted on the island of Cyprus in the Eastern Mediterranean from 2015-2018 to study heterogeneous ice formation in altocumulus and cirrus layers embedded in Saharan dust. A case study observed on 10 April 2017 is discussed in this contribution.

By utilizing Level 2A products (particle optical properties and numerical weather prediction data) and Level 2C products (numerical weather prediction wind vector assimilated with observed wind component) provided by the Atmospheric Laser Doppler Instrument (ALADIN) onboard the Aeolus mission, and Level 2 vertical feature mask (VFM) products provided by Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) onboard Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) mission, three remote ocean areas are selected and the optical properties at 355 nm of marine aerosol are derived. The combined analysis of marine aerosol optical properties at 355 nm and instantaneous co-located wind speeds above the remote ocean areas are conducted. Eventually their relationships are explored and discussed at two sperate vertical atmospheric layers (0-1 km and 1-2 km, correspond to the heights within and above marine atmospheric boundary layer (MABL)), revealing the marine aerosol related atmospheric background states. Pure marine aerosol optical properties at 355 nm are obtained after quality control, cloud screening and backscatter coefficient correction from the ALADIN observations. The spatial distributions of marine aerosol optical properties and wind speed above the study areas are presented and analysed, respectively, at two vertical layers. The statistical results of the marine aerosol optical properties along with the wind speed grids at two vertical layers together with the corresponding regression curves fitted by power law functions are acquired and analysed, for each remote ocean area. The optical properties present increasing trends with wind speed in all cases, implying that the atmosphere of the two vertical layers will both receive the marine aerosol input produced and transported by the wind and the turbulence. The marine aerosol enhancement caused by the wind speed at the lower layer is more intensive than at the higher layer. As derived data from ALADIN, the averaged marine aerosol optical depth (mar AOD) and the averaged marine aerosol lidar ratio (mar LR) at 355 nm are acquired and discussed along the wind speed range. The marine aerosol optical properties distributions, wind speed bins, and the marine aerosol variation tendencies along wind speed above the individual study areas are not totally similar, implying that the development and evolution of the marine aerosol above the ocean might not only be dominated by the drive of the wind, but also be impacted by other meteorological and environmental factors, e.g., atmospheric stability, sea and air temperature, or relative humidity. Combined analysis on the aerosol optical properties and wind with additional atmospheric parameters above the ocean might be capable to provide more detailed information of marine aerosol production, entrainment, transport and removal. [ABSTRACT FROM AUTHOR]

The Hybrid End-To-End Aerosol Classification (HETEAC) model for the Earth Clouds, Aerosols and Radiation Explorer (EarthCARE) mission is introduced. The model serves as the common baseline for the development, evaluation, and implementation of EarthCARE algorithms. It guarantees the consistency of different aerosol products from the multi-instrument platform and facilitates the conformity of broad-band optical properties needed for EarthCARE radiative-closure assessments. While the hybrid approach ensures that the theoretical description of aerosol microphysical properties is consistent with the optical properties of the measured aerosol types, the end-to-end model permits the uniform representation of aerosol types in terms of microphysical, optical, and radiative properties. Four basic aerosol components with prescribed microphysical properties are used to compose various natural and anthropogenic aerosols of the troposphere. The components contain weakly and strongly absorbing fine-mode and spherical and non-spherical coarse-mode particles and thus are representative for pollution, smoke, sea salt, and dust, respectively. Their microphysical properties are selected such that good coverage of the observational phase space of intensive, i.e., concentration-independent, optical aerosol properties derived from EarthCARE measurements is obtained. Mixing rules to calculate optical and radiative properties of any aerosol blend composed of the four basic components are provided. Applications of HETEAC in the generation of test scenes, the development of retrieval algorithms for stand-alone and synergistic aerosol products from EarthCARE's atmospheric lidar (ATLID) and multi-spectral imager (MSI), and for radiative-closure assessments are introduced. Finally, the implications of simplifying model assumptions and possible improvements are discussed, and conclusions for future validation and development work are drawn. [ABSTRACT FROM AUTHOR]

This paper presents a collection of lidar-derived aerosol intensive optical properties for several aerosol types, namely the particle linear depolarization ratio, the extinction-to-backscatter ratio (lidar ratio) and the Ångström exponent. The data collection, named DeLiAn, is based on globally distributed, long-term, ground-based, multiwavelength, Raman and polarization lidar measurements, conducted mainly with lidars that have been developed at the Leibniz Institute for Tropospheric Research. The intensive optical properties are presented at two wavelengths, 355 and 532 nm, for 13 aerosol categories. The categories cover the basic aerosol types (i.e., marine, pollution, continental European background, volcanic ash, smoke, mineral dust), as well as the most frequently observed mixtures they form. This extensive collection also incorporates more peculiar aerosol categories, including dried marine aerosol that, compared to marine aerosol, exhibits a significantly enhanced depolarization ratio (up to 15 %). Besides Saharan dust, additional mineral dust types related to their source region were identified due to their lower lidar ratios (Central Asian and Middle Eastern dust). In addition, extreme wildfire events (such as in north America and Australia) emitted smoke into the stratosphere showing significantly different optical properties, i.e., high depolarization values (up to 25 %), compared to tropospheric smoke. The data collection reflects and underlines the variety of aerosol mixtures in the atmosphere and can be used for the development of aerosol-typing schemes. The paper contains the most up-to-date and comprehensive overview of optical properties from aerosol lidar measurements and, therefore, provides a solid basis for future aerosol retrievals in the frame of both spaceborne and ground-based lidars. Furthermore, DeLiAn can assist the efforts for the harmonization of satellite records of aerosol properties performed at different wavelengths. [ABSTRACT FROM AUTHOR]