Search

Combinatorial approaches comprised of combinatorial magnetron co-sputtering deposition and fast screening methods are introduced to study color as a function of composition in Au-based alloys. The microstructures of the thin films and bulk alloys are identified by X-ray diffraction, and their colors of the alloys are characterized by optical reflectivity. The results reveal that when comparing microstructures and reflectivity, thin films are similar to bulk alloys. In Au-Ag-Cu solid solutions, the color of the ternary alloy follows the rule of mixture. For colors resulting from Au[Al.sub.2] intermetallic, the color of an alloy scales with the percentage of the intermetallic phase and the deviation from its ideal binary composition. In the Au-Al-Cu library, we found a ~90% Au[Al.sub.2] area fraction compositional window where copper addition can be tuned to improve mechanical properties while keeping purple color, even though Al and Cu[Al.sub.2] phases exist. Moreover, when comparing the color in Au-Cu-Si-Ag amorphous and crystalline state solid solution for the same composition, the colors are essentially identical. Keywords Gold alloys * Microstructure * Amorphous alloys * Intermetallics * Solid solution * Decorative thin film coating, Introduction Color is ubiquitous and plays an important role in our daily life [1]. Although there are various mechanisms underlying the generation of color, for gold(Au) and copper(Cu), it is [...]

Composites of MnO2/multi-wall carbon nanotubes (MWCNTs) were prepared using different weight ratios of MWCNTs: KMnO4 (1:2, 1:5, 1:10, 1:15, 1:20, and 1:25) using a one-pot hydrothermal method. The synthesized materials were physically characterized by x-ray diffraction, transmission electron microscopy (TEM), field emission-scanning electron microscopy (FE-SEM), (Brunauer–Emmett–Teller) BET, and thermogravimetric analysis. TEM and SEM studies indicate that MnO2 is homogeneously entangled with MWCNTs. The electrochemical performance evaluation was performed in a 3-electrode system using MnO2/MWCNT electrodes coated onto a Ni mesh as the working electrode, a Pt foil as the counter electrode, and Ag/AgCl as the reference electrode. The specific capacitance was obtained from charge–discharge studies at varying current densities between 0.5 and 5 A/g. The specific capacitance of MWCNT-KMnO4 (1:10, 1:15, and 1:25) samples was obtained as 114, 164, and 100 F/g, respectively, at a current density of 1 A/g. [ABSTRACT FROM AUTHOR]

Composites of MnO2/multi-wall carbon nanotubes (MWCNTs) were prepared using different weight ratios of MWCNTs: KMnO4 (1:2, 1:5, 1:10, 1:15, 1:20, and 1:25) using a one-pot hydrothermal method. The synthesized materials were physically characterized by x-ray diffraction, transmission electron microscopy (TEM), field emission-scanning electron microscopy (FE-SEM), (Brunauer–Emmett–Teller) BET, and thermogravimetric analysis. TEM and SEM studies indicate that MnO2 is homogeneously entangled with MWCNTs. The electrochemical performance evaluation was performed in a 3-electrode system using MnO2/MWCNT electrodes coated onto a Ni mesh as the working electrode, a Pt foil as the counter electrode, and Ag/AgCl as the reference electrode. The specific capacitance was obtained from charge–discharge studies at varying current densities between 0.5 and 5 A/g. The specific capacitance of MWCNT-KMnO4 (1:10, 1:15, and 1:25) samples was obtained as 114, 164, and 100 F/g, respectively, at a current density of 1 A/g. [ABSTRACT FROM AUTHOR]