Search

The motivation of the present paper is to study the performance of EJ 299-33 scintillator in online and off-line analysis in high rate scattering for nuclear reaction experiments performed with heavy ions. An experiment was carried out inside the CHIMERA chamber using 24Mg beams at 71.5 MeV and 81 MeV impinging on 92ZrO2 target. The plastic scintillator was backed by a photomultiplier tube and the anode pulses were digitized through 100 MHz GET electronics for the purpose of pulse shape discrimination (PSD) studies. Performances of the plastic scintillator have been tested with respect to PSD capabilities and energy spectra analysis under beam irradiations in a high background environment.

We present the performance of multiplexed XY resistive Micromegas detectors tested in the CERN SPS 100 GeV/c electron beam at intensities up to 3.3 × 10 5e−/(s-cm2). So far, all studies with multiplexed Micromegas have only been reported for tests with radioactive sources and cosmic rays. The use of multiplexed modules in high intensity environments was not explored due to the effect of ambiguities in the reconstruction of the hit point caused by the multiplexing feature. For the specific mapping and beam intensities analyzed in this work with a multiplexing factor of five, more than 50% level of ambiguity is introduced due to particle pile-up as well as fake clusters due to the mapping feature. Our results prove that by using the additional information of cluster size and integrated charge from the signal clusters induced on the XY strips, the ambiguities can be reduced to a level below 2%. The tested detectors are used in the CERN NA64 experiment for tracking the incoming particles bending in a magnetic field in order to reconstruct their momentum. The average hit detection efficiency of each module was found to be 96% at the highest beam intensities. By using four modules a tracking resolution of 1.1% was obtained with 85% combined tracking efficiency., Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 881, ISSN:0168-9002, ISSN:1872-9576

The objective of this work is to develop a novel position sensitive charged particle detector referred to as "3D Silicon Coincidence Avalanche Detector" (3D-SiCAD). The working principle of this novel device relies on a "time-coincidence" mode detection between a pair of vertically aligned Geiger-mode avalanche diodes, with the aim of achieving negligible noise levels with respect to detectors based on conventional avalanche diodes, such as Silicon Photo-Multipliers (SiPM), and, at the same time, providing single charged particle detection capability thanks to the high charge multiplication gain, inherent of the Geiger-mode operation. A 3D-SiCAD could be particularly suitable for nuclear physics applications, in the field of High Energy Physics experiments and emerging Medical Physics applications such as hadron-therapy and Proton Computed Tomography whose future developments demand unprecedented figures in terms of material budget, noise, spatial resolution, radiation hardness, power consumption and cost-effectiveness. In this work, a 3D-SiCAD demonstrator has been successfully developed and fabricated in the Austria Micro-Systems High-Voltage 0.35 μm CMOS technology by adopting a “flip-chip” approach for the 3D-assembling. The characterization results allowed demonstrating the feasibility of this novel device and validating the expected performances in terms of excellent particle detection efficiency and noise rejection capability with respect to background counts., L’objectif de cette thèse est de développer un détecteur innovant de particules chargées, dénommé 3D Silicon Coincidence Avalanche Detector (3D-SiCAD), réalisable en technologie silicium CMOS standard avec des techniques d’intégration 3D. Son principe de fonctionnement est basé sur la détection en "coïncidence" entre deux diodes à avalanche en mode "Geiger" alignées verticalement, avec la finalité d’atteindre un niveau de bruit bien inférieur à celui de capteurs à avalanche standards, tout en gardant les avantages liés à l’utilisation de technologies CMOS; notamment la grande variété d’offres technologiques disponibles sur le marché, la possibilité d’intégrer dans un seul circuit un système complexe de détection, la facilité de migrer et mettre à jour le design vers une technologie CMOS plus moderne, et le faible de coût de fabrication. Le détecteur développé dans ce travail se révèle particulièrement adapté au domaine de la physique des particules de haute énergie ainsi qu’à la physique médicale - hadron thérapie, où des performances exigeantes sont demandées en termes de résistance aux rayonnements ionisants, "material budget", vitesse, bruit et résolution spatiale. Dans ce travail, un prototype a été conçu et fabriqué en technologie HV-CMOS 0,35µm, en utilisant un assemblage 3D de type "flip-chip" avec pour finalité de démontrer la faisabilité d’un tel détecteur. La caractérisation du prototype a finalement montré que le dispositif développé permet de détecter des particules chargées avec une excellente efficacité de détection, et que le mode "coïncidence" réduit considérablement le niveau de bruit. Ces résultats très prometteurs mettent en perspective la réalisation d’un système complet de détection CMOS basé sur ce nouveau concept.