Search

In this paper, we experimentally explore the formation, evolution and breakup of Armstrong liquid bridge. The extremely complicated evolution stage is revealed, which involves many coupled processes including the morphology change, current variation, heat transfer, and water evaporation. By focusing on the final fate of this liquid bridge, we observe that the breakup occurs once an effective length ($\tilde{L}$) is reached. This effective length increases linearly with the applied voltage, implying a threshold electric field to sustain the liquid bridge. Moreover, by an introduced external flow, the lifetime of the liquid bridge can be controlled, while the effective length associated with the breakup is independent on the external flow rate. Hence, these findings remarkably demonstrate that the breakup of liquid bridge is directly correlated with the effective length. In order to understand this correlation, a simplified model of an electrified jet is employed to take the electric field into account. By the linear stability analysis, the attained phase diagram agrees with the experiments well. Although a more comprehensive theory is required to consider other factors such as the surface charges, these results might provide a fresh perspective on the ``century-old" Armstrong liquid bridge to further elucidate its underlying physical mechanism.

The technique of passive daytime radiative cooling (PDRC) is used to cool an object down by simultaneously reflecting sunlight and thermally radiating heat to the cold outer space through the Earth's atmospheric window. However, for practical applications, current PDRC materials are facing unprecedented challenges such as complicated and expensive fabrication approaches and performance degradation arising from surface contamination. Here, we develop a scalable paper-based material with excellent self-cleaning and self-cooling capabilities, through air-spraying ethanolic polytetrafluoroethylene (PTFE) microparticles suspensions embedded within the micropores of the paper. The formed superhydrophobic PTFE coating not only protects the paper from water wetting and dust contamination for real-life applications but also reinforces its solar reflectance by sunlight backscattering. The paper fibers, when enhanced with PTFE particles, efficiently reflect sunlight and strongly radiate heat through the atmospheric window, resulting in a sub-ambient cooling performance of 5$^{\circ}$C and radiative cooling power of 104 W/m$^2$ under direct solar irradiance of 834 W/m$^2$ and 671 W/m$^2$, respectively. The self-cleaning surface of the cooling paper extends its lifespan and keep its good cooling performance for outdoor applications. Additionally, dyed papers are experimentally studied for broad engineering applications. They can absorb appropriate visible wavelengths to display specific colors and effectively reflect near-infrared lights to reduce solar heating, which synchronously achieves effective radiative cooling and aesthetic varieties in a cost-effective, scalable, and energy-efficient way.

Spectrally selective solar absorbers (SSAs), harvesting sunlight into heat, are the key to the concentrated solar thermal systems. Current SSAs' designs using photonic crystals, metamaterials, or cermets are either cost-inefficient or have limited applicability due to complicated nanofabrication methods and poor thermal stability at high temperatures. We present a scalable-manufactured blackbody cavity solar absorber design with nearly ideal properties. The unity solar absorptivity and nearly zero infrared emissivity allow for a stagnation temperature of 880C under 10 suns. The performance surpasses those state-of-the-art SSAs manufactured by nanofabrication methods. This design relies on traditional fabricating methods, such as machining, casting, and polishing. This makes it easy for large-scale industrial applications, and the "blackbody cavity" feature enables its fast-integration to existing concentrated solar thermal systems.

While solar power systems have offered a wide variety of electricity generation approaches including photovoltaics, solar thermal power systems, and solar thermoelectric generators, the ability of generating electricity at both the daytime and nighttime with no necessity of energy storage still remains challenging. Here, we propose and verify a strategy of harvesting solar energy by solar heating during the daytime and harnessing the coldness of the outer space through radiative cooling to produce electricity at night using a commercial thermoelectric module. It enables electricity generation for 24 hours a day. We experimentally demonstrate a peak power density of 37 mW/m2 at night and a peak value of 723 mW/m2 during the daytime. A theoretical model that accurately predicts the performance of the device is developed and validated. The feature of 24-hour electricity generation shows great potential energy applications of off-grid and battery-free lighting and sensing.

Thermal management has become a promising field in recent years due to the limitation of energy resources and the global warming. An important topic in improving the efficiency of thermal energy utilization is how to control the flows of heat, and thermal rectifiers, such as the thermal transistor, have been proposed as units for modulating the flow of heat. In this work, a reconfigurable non-contact thermal transistor with two-dimensional grating is introduced. The thermal transistor consists of three parts: source, gate, and drain, with the gate working around the phase-transition temperature of vanadium dioxide, a type of phase-transition material. Results show that the unit has a clear transistor-like behavior. The surface phonon/plasmon polaritons supported by the insulating/metallic states that contribute to the radiative thermal transport can be modulated at a nanoscale separation. And the dynamic amplification factor ranges from 15.4 to 30.6 when the stretchable polydimethylsiloxane is subjected to tension or compression. This work sheds light on studies about the controllable small-scale thermal transport due to mechanical deformations.

Passive radiative cooling drawing the heat energy of objects to the cold outer space through the atmospheric transparent window (8 um - 13 um) is significant for reducing the energy consumption of buildings. Daytime and nighttime radiative cooling have been extensively investigated in the past. However, radiative cooling which can continuously regulate its cooling temperature, like a valve, according to human need is rarely reported. In this study, we present a concept of reconfigurable photonic structure for the adaptive radiative cooling by continuously varying the emission spectra in the atmospheric window region. This is realized by the deformation of the one-dimensional PDMS grating and the nanoparticles embedded PDMS thin film when subjected to mechanical strain. The proposed structure reaches different stagnation temperatures under certain strains. A dynamic exchange between two different strains results in the fluctuation of the photonic structure's temperature around a set temperature.

Taking advantage of phase-transition and reconfigurable metamaterials, dynamic control of nanoscale thermal modulation can be achieved through the near-field radiative thermal rectification devices. In this work, an active-tuning near-field thermal rectifier using reconfigurable phase-transition metamaterials is explored. The rectifier has two terminals separated by vacuum, working under a controllable operational temperature around the critical temperature of the phase-transition material VO2. One of the terminals is a stretchable structure made of PDMS thin film and grating consisting of various types of phase-transition material. The effects of various inclusion forms and all the related geometric parameters are well analyzed. The controllable nanoscale thermal modulation can be achieved and the ultrahigh rectification ratios of 23.7 and 19.8, the highest values ever predicted, can be obtained for two deformation scenarios, respectively. It will shed light on the dynamic tuning of small-scale thermal transport and light manipulation.

Solar-driven interfacial steam generation for desalination has attracted broad attention. However, a significant challenge still remains for achieving a higher evaporation rate and high water quality, together with a cost-effective and easy-to-manufacture device to provide a feasible solar-driven steam generation system. In this study, a novel ultra-black paint, Black 3.0, serving as a perfect solar absorber is introduced into the hot-pressed melamine foam networks, allowing us to construct an ultra-black (99% absorptance in the solar region) and self-floating evaporation device. The high performing features of effective solar absorptance and salt-rejection capability contribute to a high-to-date evaporation rate of freshwater at 2.48 kg m-2 h-1 under one sun (1 kW m-2). This interfacial solar evaporator has a daily drinkable water yield of 2.8 kg m-2 even in cloudy winter weather and maintains stability in water with a wide range of acidity and alkalinity (pH 1~14). These features will enable the construction of a facilely fabricated, robust, highly-efficient, and cost-effective solar steam generation system for freshwater production.