Search

Purpose: To evaluate the impact of five different tooth preparation designs on the marginal and internal fit discrepancies of cobalt-chromium (CoCr) crowns produced by computer-aided designing (CAD) and selective laser melting (SLM) processes., Materials and Methods: Five preparation data were constructed, after which design crowns were obtained. Actual crowns were fabricated using an SLM process. After the data of actual crowns were obtained with structural light scanning, intaglio surfaces of the design crown and actual crown were virtually superimposed on the preparation. The fit-discrepancies were displayed with colors, while the root means square was calculated and analyzed with one-way analysis of variance (ANOVA), Tukey's test or Kruskal-Wallis test (α =.05)., Results: The marginal or internal color-coded images in the five design groups were not identical. The shoulder-lip and sharp line angle groups in the CAD or SLM process had larger marginal or internal fit discrepancies compared to other groups ( P < .05). In the CAD process, the mean marginal and internal fit discrepancies were 10.0 to 24.2 µm and 29.6 to 31.4 µm, respectively. After the CAD and SLM processes, the mean marginal and internal fit discrepancies were 18.4 to 40.9 µm and 39.1 to 47.1 µm, respectively. The SLM process itself resulted in a positive increase of the marginal (6.0 - 16.7 µm) and internal (9.0 - 15.7 µm) fit discrepancies., Conclusion: The CAD and SLM processes affected the fit of CoCr crowns and varied based on the preparation designs. Typically, the shoulder-lip and sharp line angle designs had a more significant effect on crown fit. However, the differences between the design groups were relatively small, especially when compared to fit discrepancies observed clinically., (© 2021 The Korean Academy of Prosthodontics.)

Biomimetic nanotechnology through camouflaging synthetic nanoparticles (NPs) with natural cell membranes, which bestows with immune evasion and superior targeting capacity, has been extensively used in drug delivery systems (DDS) over the last decades. These biomimetic NPs not only retain the physicochemical features of the synthetic vehicles but also inherit the cell membranes' intrinsic functionalities. Combined with these benefits, optimized nano-biomimetic DDS allow maximum delivery efficacy. Compared to erythrocyte/cancer single cell membrane, the hybrid cell membrane expressing CD47 membrane protein and self-recognition molecules, from erythrocytes and cancer cells, provides remarkable features to the synthetic vehicles, such as immune evasion, long-term circulation, and homotypic targeting. In this review, we describe the preparation strategies, the camouflaging mechanism, and the antitumor applications of hybrid cell membrane-camouflaged NPs. Moreover, we discuss further modification of the hybrid cell membrane and the surface properties of fusion cellular membranes. Finally, we summarize the primary challenges and opportunities associated with these NPs. STATEMENT OF SIGNIFICANCE: Camouflaging synthetic nanoparticles with hybrid cell membrane has been extensively highlighted in recent years. The resultant biomimetic nanoparticles not only reserve the physicochemical properties of the synthetic nanoparticles but also inherit the biological functions of source cells. Compared with single cell membrane, hybrid cell membrane can endow synthetic nanoparticles with multiple biofunctions derived from the original source cells. To provide a timely review of this rapidly developing subject of research, this paper summarized recent progress on the hybrid cell membrane-camouflaged nanoparticles as drug delivery systems for cancer diagnosis and treatment. In this review, we focused primarily on five different types of hybrid cell membrane-camouflaged nanoparticles with the preparation strategies, the camouflaging mechanism, and the antitumor applications. Moreover, further modification of the hybrid cell membrane was also discussed for isolating effectively circulating tumor cells., Competing Interests: Declaration of Competing Interest The authors declare no conflict of interest., (Copyright © 2020. Published by Elsevier Ltd.)

Objective: The purpose of this study is to investigate the potential effects of sclerostin (SOST) on the biological funtions and related mechanisms of cementoblasts under mechanical stress., Methods: OCCM-30 cells were treated with varying doses of SOST (0, 25, 50, and 100 ng·mL⁻¹) and were loaded with uniaxial compressive stress (2 000 μ strain with a frequency of 0.5 Hz) for six hours. Western blot was utilized to detect the expressions of β-catenin, p-smad1/5/8, and smad1/5/8 proteins. Alkaline phosphatase (ALP) activity was determined, and reverse transcription polymerase chain reaction was used to measure the expressions of runt-related transcription factor 2 (Runx-2), osteocalcin (OCN), bone sialoproteins (BSP), receptor activator of NF-κB ligand (RANKL) and osteoprotegerin (OPG) mRNA., Results: The expression of p-smad
1/5/8 was significantly downregulated with increasing SOST. β-catenin and smad1/5/8 exhibited no difference. ALP activity decreased under mechanical compressive stress with increasing SOST concentrations. Runx-2 expression was reduced with increasing SOST concentrations, and a similar trend was observed for the BSP and OCN expressions. When the SOST concentration was enhanced, RANKL expression gradually increased, whereas the expression of OPG decreased., Conclusions: Under mechanical comprehensive stress, SOST can adjust the bone morphogenetic protein (BMP) /smad signal pathway. Osteosclerosis inhibits the mineralization of cementoblasts under mechanical compressive stress, which may be achieved by inhibiting the expressions of osteogenesis factors (Runx2, OCN, BSP, and others) and by promoting the ratio of cementoclast-related factors (RANKL/OPG) through BMP signal pathways.

Purpose: The study aimed to identify the accuracy and reproducibility of preparations made by gypsum materials of various colors using quantitative and semi-quantitative three-dimensional (3D) approach., Materials and Methods: A titanium maxillary first molar preparation was created as reference dataset (REF). Silicone impressions were duplicated from REF and randomized into 6 groups (n=8). Gypsum preparations were formed and grouped according to the color of gypsum materials, and light-scanned to obtain prepared datasets (PRE). Then, in terms of accuracy, PRE were superimposed on REF using the best-fit-algorithm and PRE underwent intragroup pairwise best-fit alignment for assessing reproducibility. Root mean square deviation (RMSD) and degrees of similarity (DS) were computed and analyzed with SPSS 20.0 statistical software (α=.05)., Results: In terms of accuracy, PREs in 3D directions were increased in the 6 color groups (from 19.38 to 20.88 µm), of which the marginal and internal variations ranged 51.36 - 58.26 µm and 18.33 - 20.04 µm, respectively. On the other hand, RMSD value and DS-scores did not show significant differences among groups. Regarding reproducibility, both RMSD and DS-scores showed statistically significant differences among groups, while RMSD values of the 6 color groups were less than 5 µm, of which blue color group was the smallest (3.27 ± 0.24 µm) and white color group was the largest (4.24 ± 0.36 µm). These results were consistent with the DS data., Conclusion: The 3D volume of the PREs was predisposed towards an increase during digitalization, which was unaffected by gypsum color. Furthermore, the reproducibility of digitalizing scanning differed negligibly among different gypsum colors, especially in comparison to clinically observed discrepancies.

Background: The nutritional support is one of the important therapeutic strategies for the elderly patients with severe sepsis, but there is controversial in choosing a parenteral nutrition formulation. This study was designed to compare the therapeutic effects of structured lipid emulsion, physically mixed medium, and long-chain fat emulsion in the treatment of severe sepsis in elderly patients., Methods: A total number of 64 elder patients with severe sepsis were enrolled in the study. After a week of enteral nutritional support, the patients were randomly divided into research (structured lipid emulsion as parenteral alimentation) and control groups (physically mixed medium and long-chain fat emulsion as parenteral alimentation). The alterations of plasma albumin, lipid metabolism, and blood glucose level were recorded after parenteral alimentation and were compared between the two groups., Results: The plasma levels of albumin, prealbumin, cholesterol, and triglyceride were decreased in all the patients after one week of enteral nutritional support treatment (t = 7.78, P = 0.000; t = 10.21, P = 0.000; t = 7.99, P = 0.000; and t = 10.99, P = 0.000). Further parenteral alimentation with different lipid emulsions had significant effects on the serum prealbumin and albumin (t = 3.316, P = 0.002; t = 3.200, P = 0.002), whilst had no effects on the blood glucose and triglyceride level (t = 7.78, P = 0.000; t = 4.228, P = 0.000). In addition, the two groups had a significantly different Apache II score, ventilator time, and hospital stay time (t = -2.213, P = 0.031; t = 2.317, P = 0.024; t = 2.514, P = 0.015)., Conclusions: The structured lipid emulsion was safe as parenteral nutrition for elderly patients with severe sepsis. It was demonstrated to be superior to the physically mixed medium and long-chain fat emulsion with respect to the protein synthesis and prognosis.

Background: Myocardial apoptosis is involved in the pathogenesis of sepsis-related myocardial depression. However, the underlying mechanism remains unknown. This study investigated the role of mitochondrial damage and mitochondria-induced oxidative stress during cardiac apoptosis in septic rats., Methods: Seventy-two Sprague-Dawley rats were randomly divided into a control group and septic group receiving lipopolysaccharide injection. Heart tissue was removed and changes in cardiac morphology were observed by light microscopy and scanning electron microscopy. In situ apoptosis was examined using terminal transferase-mediated dUTP nick end-labeling assay and nuclear factor-kappa B activation in myocardium by Western blotting to estimate myocardial apoptosis. Appearance of mitochondrial cristae and activation of cytochrome C oxidase were used to evaluate mitochondrial damage. Oxidative stress was assessed by mitochondrial lipid and protein oxidation, and antioxidant defense was assessed by mitochondrial superoxide dismutase and glutathione peroxidase activity., Results: Sepsis-induced inflammatory cell infiltration, myocardium degeneration and dropsy were time-dependent. Expanded capillaries were observed in the hearts of infected rats 24 hours post-challenge. Compared with sham-treated rats, the percentage of cell apoptosis increased in a time-dependent manner in hearts from septic rats at 6 hours, 12 hours and 24 hours post-injection (P < 0.05). The expression of nuclear factor-kappa B p65 decreased gradually in the cytosol and increased in the nucleus during sepsis, indicating that septic challenge provoked the progressive activation of nuclear factor-kappa B. Mitochondrial cristae and activation of cytochrome C oxidase increased in a time-dependent manner. Both superoxide dismutase and glutathione peroxidase activities decreased, while mitochondrial lipid and protein oxidation increased between 6 and 24 hours after lipopolysaccharide challenge., Conclusions: Septic challenge induced myocardial apoptosis and mitochondrial damage. Furthermore, mitochondrial damage via alteration of defenses against reactive oxygen species might play an important role in myocardial apoptosis during sepsis.