Search

The interface-induced second-harmonic generation from ferroelectric hafnium–zirconium oxide (Hf0.5Zr0.5O2) epitaxial thin films, buffered with a La0.67Sr0.33MnO3 bottom electrode, is analyzed as a function of input and output polarization angles and the azimuthal angle of the sample for several film thicknesses. It is shown that the signal is generated mainly from the buffer side of the interface, rather than from the ferroelectric side. However, the ferroelectric film affects significantly the nonlinear optical properties of the underlying ferromagnetic buffer electrode. Several mechanisms accounting for these observations are discussed, from oxygen migration, to an electrostatic effect, including a possible modulation of the La0.67Sr0.33MnO3 magnetization by the upper ferroelectric film., The authors would like to acknowledge funding from the Italian Government, PRIN-TWEET (grant code 2017YCTB59), and from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019-000917-SMCIN, AEI/10.13039/501100011033), PID2020-112548RB-I00 (MCIN/AEI/10.13039/501100011033), and PID2019-107727RB-I00 (MCIN/AEI/10.13039/501100011033) projects. All authors would like to thank Silvia Picozzi (CNR-SPIN) and Christian Rinaldi (Politecnico Milano) for the useful discussions., info:eu-repo/grantAgreement/AGENCIA FINANCIADORA/PROGRAMA DE FINANCIACIÓN/REFERENCIA DEL PROYECTO

The control of Mott phase is intertwined with the spatial reorganization of the electronic states. Out-of-equilibrium driving forces typically lead to electronic patterns that are absent at equilibrium, whose nature is however often elusive. Here, we unveil a nanoscale pattern formation in the Ca$_2$RuO$_4$ Mott insulator. We demonstrate how an applied electric field spatially reconstructs the insulating phase that, uniquely after switching off the electric field, exhibits nanoscale stripe domains. The stripe pattern has regions with inequivalent octahedral distortions that we directly observe through high-resolution scanning transmission electron microscopy. The nanotexture depends on the orientation of the electric field, it is non-volatile and rewritable. We theoretically simulate the charge and orbital reconstruction induced by a quench dynamics of the applied electric field providing clear-cut mechanisms for the stripe phase formation. Our results open the path for the design of non-volatile electronics based on voltage-controlled nanometric phases., 14 pages, 9 figures

The ability to form freestanding oxide membranes of nanoscale thickness is of great interest for enabling material functionality and for integrating oxides in flexible electronic and photonic technologies. Recently, a route has been demonstrated for forming conducting heterostructure membranes of LaAlO3 and SrTiO3, the canonical system for oxide electronics. In this route, the epitaxial growth of LaAlO3 on SrTiO3 resulted in a strained state that relaxed by producing freestanding membranes with random sizes and locations. Here, we extend the method to enable self-formed LaAlO3/SrTiO3 micromembranes with control over membrane position, their lateral sizes from 2 to 20 mu m, and with controlled transfer to other substrates of choice. This method opens up the possibility to study and use the two-dimensional electron gas in LaAlO3/SrTiO3 membranes for advanced device concepts.

We report the study of anatase TiO2(001)-oriented thin films grown by pulsed laser deposition on LaAlO3(001). A combination of in situ and ex situ methods has been used to address both the origin of the Ti(3+)-localized states and their relationship with the structural and electronic properties on the surface and the subsurface. Localized in-gap states are analyzed using resonant X-ray photoelectron spectroscopy and are related to the Ti(3+) electronic configuration, homogeneously distributed over the entire film thickness. We find that an increase in the oxygen pressure corresponds to an increase in Ti(3+) only in a well-defined range of deposition pressure; outside this range, Ti(3+) and the strength of the in-gap states are reduced.

The discovery of 2D conductivity at the LaAlO3/SrTiO3 interface has been linking, for over a decade, two of the major current research fields in materials science: correlated transition-metal-oxide systems and low-dimensional systems. Notably, despite the 2D nature of the interfacial electron gas, the samples are 3D objects with thickness in the mm range. This prevented researchers so far from adopting strategies that are only viable for fully 2D materials, or from effectively exploiting degrees of freedom related to strain, strain gradient and curvature. Here a method based on pure strain engineering for obtaining freestanding LaAlO3/SrTiO3 membranes with micrometer lateral dimensions is demonstrated. Detailed transmission electron microscopy investigations show that the membranes are fully epitaxial and that their curvature results in a huge strain gradient, each layer showing a mixed compressive/tensile strain state. Electronic devices are fabricated by realizing ad hoc circuits for individual micro-membranes transferred on silicon chips. The samples exhibit metallic conductivity and electrostatic field effect like 2D-electron systems in bulk heterostructures. The results open a new path for adding oxide functionalities into semiconductor electronics, potentially allowing for ultra-low voltage gating of a superconducting transistors, micromechanical control of the 2D electron gas mediated by ferroelectricity and flexoelectricity, and on-chip straintronics.

LaAlO$_{3}$ and NdGaO$_{3}$ thin films of different thickness have been grown by pulsed laser deposition on TiO$_2$-terminated SrTiO$_{3}$ single crystals and investigated by soft X-ray photoemission spectroscopy. The surface sensitivity of the measurements has been tuned by varying photon energy $h\nu$ and emission angle $\Theta$. In contrast to the core levels of the other elements, the Sr $3d$ line shows an unexpected splitting for higher surface sensitivity, signaling the presence of a second strontium component. From our quantitative analysis we conclude that during the growth process Sr atoms diffuse away from the substrate and segregate at the surface of the heterostructure, possibly forming strontium oxide.

We report on the transport properties of hybrid devices obtained by depositing graphene on a LaAlO3/SrTiO3 oxide junction hosting a 4 nm-deep 2-dimensional electron system. At low graphene-oxide inter-layer bias, the two electron systems are electrically isolated, despite their small spatial separation. A very efficient reciprocal gating of the two neighboring 2-dimensional systems is shown. A pronounced rectifying behavior is observed for larger bias values and ascribed to the interplay between electrostatic field-effects and tunneling across the LaAlO3 barrier. The relevance of these results in the context of strongly coupled bilayer systems is discussed. (C) 2016 Author(s).

Combining reflection high-energy electron diffraction, high-resolution transmission electron microscopy, and high-angle annular dark field scanning transmission electron microscopy we unveil the existence of a peculiar transition from a three-dimensional to a two-dimensional growth mode in anatase TiO2/LaAlO3 heterostructures. Such a growth dynamics is accompanied by Al interdiffusion from substrate to the growing film up to a critical thickness of 20 nm. With the extra support of ab initio calculations, we show that the crossover between the two growth modes corresponds to the formation of two distinct regions characterized by (103)- and (101)-oriented crystallographic shear superstructures, occurring in the upmost film region and in proximity of the film/substrate interface, respectively. © 2013 Springer Science+Business Media Dordrecht.

The discovery that the interface between two band gap insulators LaAlO3 and SrTiO3 is highly conducting has raised an enormous interest in the field of oxide electronics. The LAlO3/SrTiO3 interface can be tuned using an electric field and switched from a superconducting to an insulating state. Conducting paths in an insulating background can be written applying a voltage with the tip of an atomic force microscope, creating great promise for the development of a new generation of nanoscale electronic devices. However, the mechanism for interface conductivity in LaAlO3/SrTiO3 has remained elusive. The theoretical explanation based on an intrinsic charge transfer (electronic reconstruction) has been strongly challenged by alternative descriptions based on point defects. In this work, thanks to modern aberration-corrected electron probes with atomic-scale spatial resolution, interfacial charge and atomic displacements originating the electric field within the system can be simultaneously measured, yielding unprecedented experimental evidence in favor of an intrinsic electronic reconstruction., Accepted for publication in Advanced Materials. Published online on 06/20/2012

The time-resolved photoconductance of amorphous and crystalline LaAlO$_3$/SrTiO$_3$ interfaces, both hosting an interfacial 2-dimensional electron gas, is investigated under irradiation by variable-wavelengths, visible or ultraviolet photons. Unlike bare SrTiO$_3$ single crystals, showing relatively small photoconductance effects, both kinds of interfaces exhibit an intense and highly persistent photoconductance with extraordinarily long characteristic times. The temporal behaviour of the extra photoinduced conductance persisting after light irradiation shows a complex dependence on interface type (whether amorphous or crystalline), sample history and irradiation wavelength. \textcolor{black}{The experimental results indicate that different mechanisms of photoexcitation are responsible for the photoconductance of crystalline and amorphous LaAlO$_3$/SrTiO$_3$ interfaces under visible light. We propose that the response of crystalline samples is mainly due to the promotion of electrons from the valence bands of both SrTiO$_3$ and LaAlO$_3$. This second channel is less relevant in amorphous LaAlO$_3$/SrTiO$_3$, where the higher density of point defects plays instead a major role., 8 pages, 5 figures, 3 tables, accepted on Scientific Reports 2015

The electronic properties of NdGaO3/SrTiO3, LaGaO3/SrTiO3 and LaAlO3/SrTiO3 interfaces, all showing an insulator-to-metal transition as a function of the overlayer-thickness, are addressed in a comparative study based on x-ray absorption, x-ray photoemission and resonant photoemission spectroscopy. The nature of the charge carriers, their concentration and spatial distribution as well as the interface band alignments and the overall interface band diagrams are studied and quantitatively evaluated. The behavior of the three analyzed heterostructures is found to be remarkably similar. The valence band edge of all the three overlayers aligns to that of bulk SrTiO3. The near-interface SrTiO3 layer is affected, at increasing overlayer thickness, by the building-up of a confining potential. This potential bends both the valence and the conduction band downwards. The latter one crossing the Fermi energy in the proximity of the interface and determines the formation of an interfacial band offset growing as a function of thickness. Quite remarkably, but in agreement with previous reports for LaAlO3/SrTiO3, no electric field is detected inside any of the polar overlayers. The essential phenomenology emerging from our findings is discussed on the base of different alternative scenarios regarding the origin of interface carriers and their interaction with an intense photon beam.

Optical second harmonic generation is proposed as a tool for non-invasive, non-destructive, real-time, in-situ imaging of oxide epitaxial film growth. The films can be monitored by surface imaging with a lateral resolution of

Functional perovskite oxides are recognized for their stunningly rich physics and for their potential as next-generation electronic materials. Their properties include high Tc superconductivity, colossal magnetoresistance, record-high dielectric/ferroelectric/piezoelectric performances, multiferroic behavior, resistive switching behavior, giant thermoelectric and magnetocaloric effects, giant ionic conduction, and catalytic behavior. Due to their intrinsic chemical and crystal similarities, functional oxides can be stacked in multilayer heterostructures exhibiting an astonishing degree of epitaxial perfection. Such artificial systems not only allow one to combine in a single device the functionalities of their individual layers, but often reveal an even wider range of emergent novel properties that can be surprisingly different from those of the single building blocks. The goal of this issue of MRS Bulletin is to present the state of the art of oxide interfaces in inscience and technology. Here we provide an introduction to their properties, serving as a base for the following topical articles.

The fabrication of oxide electronics devices is presently hindered by the lack of standardized and well established patterning procedures, applicable down to the nanoscale. In this work, the authors propose a procedure to obtain patterns with resolution around 100 nm on (La,Sr)MnO3/LaAlO3/SrTiO3 heterostructures. Our method is based on a multistep technique, which includes wet and dry etching, epitaxial masking, and e-beam lithography. Our procedure is devised to define independent patterns on the interfacial two dimensional electron gas and on the metallic top electrode, while preserving an all-in situ approach for the heterostructure growth. The authors show results on nano-scale devices based on (La,Sr)MnO3/LaAlO3/SrTiO3, suitable for oxide spintronics applications.

We present various concepts and experimental procedures to fabricate biepitaxial YBa 2Cu 3O 7-x grain boundary Josephson junctions. Different types of structures can be realized including "π-loops" in which one of the junctions is intrinsically π-phase shifted. Due to its versatility the biepitaxial technique offers the possibility to investigate basic aspects of the physics of grain boundary Josephson junctions, and also the influence of intrinsic and extrinsic d-wave induced effects in transport properties. Further, we discuss the possibility to produce circuits in which "0-" and "π-loops" are controllably located on the same chip, and intrinsic d-wave effects can be exploited.

The effects of the order parameter symmetry and the interface grain boundary orientation on the transport properties of YBa/sub 2/Cu/sub 3/O/sub 7-x/ biepitaxial grain boundary junctions have been investigated. 45/spl deg/ [100] tilt and twist junctions on SrTiO/sub 3/ [110] and MgO [110] substrates by employing respectively MgO and SrTiO/sub 3/ as seed layers have been fabricated. More complex junctions by using CeO as seed layers have also been fabricated and analyzed. The analysis of experimental data points towards a predominant d-wave symmetry of the superconductive order parameter.

YBa/sub 2/Cu/sub 3/O/sub 7/-/sub x/ junctions and dc SQUIDs have been realized by employing 45/spl deg/ a-axis tilt grain boundaries through a fabrication procedure based on the biepitaxial technique. YBa/sub 2/Cu3O/sub 7-x/ grows mainly oriented [103] on SrTiO/sub 3/ and [001] on the MgO seed layer. A wide characterization of the tilt junctions and SQUID properties has been carried out. High values of the I/sub C/R/sub N/ quality factor and of the magnetic flux-to-voltage transfer parameter have been obtained, The observed phenomenology confirms differences from the one typical of 45/spl deg/ c-axis tilt grain boundary junctions and gives important information on the nature of the current steps appearing at finite voltages in the current-voltage characteristics. These devices could also have some impact on experiments designed to study the symmetry of the order parameter, exploiting their microstructure and anisotropic properties. A maximum speed of Josephson vortices as calculated from the voltage step values, of the order of 2 10/sup 6/ m/sec is obtained, which encourages high frequency applications.