Search

Abstract The development of flexible electronic devices has been a primary focus in various fields, and silver nanowire (Ag NW) networks show significant promise due to their unique electrical and mechanical properties. However, achieving well-defined and stable nanowire coatings on polymer substrates remains challenging. This work presents a novel and simple approach for directly coating Ag NWs on cyclic olefin copolymer (COC) substrates utilizing ultraviolet/ozone (UVO) treatment, a method not previously demonstrated for this specific material system up to our knowledge. The compatibility of this approach with COC eliminates the need for complex pre- and post-treatment processes, making it a more straightforward and environmentally friendly way to improve adhesion between Ag NWs and COC. The Ag NWs/COC electrodes exhibited excellent optoelectrical performance, with a high optical transmittance of 84% and a low sheet resistance of 13 Ω/sq—metrics that compare favorably to industry standards for transparent conductive films. Additionally, the Ag NWs/COC electrodes displayed excellent mechanical stability, showing no changes in sheet resistance after both tape adhesion and film bending tests. The novelty of the presented Ag NW-COC system, combined with the simplicity and environmental benefits of the UVO coating approach, as well as the demonstrated performance and stability of the resulting electrodes, make this work a significant advancement towards realizing the commercial potential of flexible electronics for biocompatible and wearable device applications.

Abstract A method for a permanent surface modification of polydimethylsiloxane (PDMS) is presented. A case study on the attachment of PDMS and the lithium niobate (LiNbO3) wafer for acoustofluidics applications is presented as well. The method includes a protocol for chemically treating the surface of PDMS to strengthen its bond with the LiNbO3 surface. The PDMS surface is modified using the 3-(trimethoxysilyl) propyl methacrylate (TMSPMA) silane reagent. The effect of silane treatment on the hydrophilicity, morphology, adhesion strength to LiNbO3, and surface energy of PDMS is investigated. The results demonstrated that the silane treatment permanently increases the hydrophilicity of PDMS and significantly alters its morphology. The bonding strength between PDMS and LiNbO3increased with the duration of the silane treatment, reaching a maximum of approximately 500 kPa. To illustrate the effectiveness of this method, an acoustofluidic device was tested, and the device demonstrated very promising enhanced bonding and sealing capabilities with particle manipulation at a flow rate of up to 1 L/h by means of traveling surface acoustic waves (TSAW). The device was reused multiple times with no fluid leakage or detachment issues. The utility of the presented PDMS surface modification method is not limited to acoustofluidics applications; it has the potential to be further investigated for applications in various scientific fields in the future.