Search

Asymmetric spin–orbit interaction (ASOI) breaks the limitations in conjugate symmetry of traditional geometric phase metasurfaces, bringing new opportunities for various applications such as spin-decoupled holography, imaging, and complex light field manipulation. Since anisotropy is a requirement for spin–orbit interactions, existing ASOI mainly relies on meta-atom with C1 and C2 symmetries, which usually suffer from an efficiency decrease caused by the propagation phase control through the structural size. Here, we demonstrate for the first time that ASOI can be realized in meta-atoms with rotational symmetry ≥3 by combining the generalized geometric phase with the propagation phase. Utilizing an all-metallic configuration, the average diffraction efficiency of the spin-decoupled beam deflector based on C3 meta-atoms reaches ∼84 % in the wavelength range of 9.3–10.6 μm, which is much higher than that of the commonly used C2 meta-atoms with the same period and height. This is because the anisotropy of the C3 metasurface originates from the lattice coupling effect, which is relatively insensitive to the propagation phase control through the meta-atom size. A spin-decoupled beam deflector and hologram meta-device were experimentally demonstrated and performed well over a broadband wavelength range. This work opens a new route for ASOI, which is significant for realizing high-efficiency and broadband spin-decoupled meta-devices.

The manipulation of vector optical fields in three-dimensional (3D) space plays a vital role in both fundamental research and practical implementations of polarization optics. However, existing studies mostly focus on 3D vector optical fields with limited modes. Here, an approach of spin-decoupled spatial partitioning is proposed to generate complex 3D vector optical fields with a customizable number of modes on demand. The crosstalk among different modes is effectively suppressed by the decoupling capability of asymmetric photonic spin–orbit interactions (PSOIs) and the design of region displacement for opposite spin states. As a proof-of-concept demonstration, a metasurface is designed to generate longitudinally varying high-order cylindrical vector fields, ranging from the 2nd to the 10th order in even sequences along the propagation direction. The experimental results demonstrate the effectiveness and potential of our approach to enabling precise control of 3D vector optical fields with arbitrary mode combinations. This work holds promising applications in biophotonics, quantum optics, and communications.

Non-line-of-sight (NLOS) imaging aims at recovering hidden objects located beyond the traditional line of sight, with potential applications in areas such as security monitoring, search and rescue, and autonomous driving. Conventionally, NLOS imaging requires raster scanning of laser pulses and collecting the reflected photons from a relay wall. High-time-resolution detectors obtain the flight time of photons undergoing multiple scattering for image reconstruction. Expanding the scanning area while maintaining the sampling rate is an effective method to enhance the resolution of NLOS imaging, where an angle magnification system is commonly adopted. Compared to traditional optical components, planar optical elements such as liquid crystal, offer the advantages of high efficiency, lightweight, low cost, and ease of processing. By introducing liquid crystal with angle magnification capabilities into the NLOS imaging system, we successfully designed a large field-of-view high-resolution system for a wide scanning area and high-quality image reconstruction. Furthermore, in order to reduce the long data acquisition time, a sparse scanning method capitalizing on the correlation between measurement data to reduce the number of sampling points is thus proposed. Both the simulation and experiment results demonstrate a >20 % reduction in data acquisition time while maintaining the exact resolution.

ObjectiveTo provide technical support for combating adulteration of plant-derived ingredients， the detection application of non-directional screening of plant-derived ingredients in food was realized.MethodsModified CTAB， SDS， and kit methods were used to extract genomic DNA from various plant-derived foods. Quality， concentration， and purity of the obtained DNA were compared. Using the RbcL gene in the chloroplast genome of plants as a barcode， 30 plant species were selected to verify the universality and specificity of this primer. Combining the second-generation high-throughput sequencing with DNA barcode technology， species identification of four mixed plant samples sold in Shandong Province was performed.ResultsDNA extraction using the improved CTAB and kit methods removed the interference of polysaccharides and polyphenols， which was an ideal effect， whereas that of the SDS method was poor. The DNA concentration obtained by CTAB method was higher than that obtained using the kit method. This method had a good performance in universality and specificity of 30 selected plant species. At the genus and species level， the identification rate of plant species in mixed samples was high. The detection rate at the species level was 98%， and resulted in non-target matching.ConclusionThe RbcL gene can be used as a barcode for plant species identification. The discrimination rate is high at the genus level. At the species level， detection rate was high and discrimination rate was low. To provide a foundation for the advancement of DNA metabarcoding method in the field of identification for plant-derived components in food， the method can be further improved by increasing the barcode length.

ObjectiveTo detect the adulteration in milk and dairy products， the method for identification of animal derived components in milk and dairy products was constructed.MethodsThe specific primer probes of cattle， sheep， donkey and buffalo were designed and synthesized. The nucleic acid extraction method in milk and dairy products was optimized. The specificity， sensitivity and applicability of the designed fluorescent PCR method were verified.ResultsThe method had strong specificity and sensitivity for common animal species. The detection sensitivities of cattle， sheep， donkey and buffalo were 0.001， 0.01， 0.01 and 0.01 ng， respectively.ConclusionThe specificity， sensitivity， detection limit and other indicators of the constructed method can meet the needs of daily experiments， and provide strong technical support for supervision and testing.

Longitudinal optical field modulation is of critical importance in a wide range of applications, including optical imaging, spectroscopy, and optical manipulation. However, it remains a considerable challenge to realize a uniformly distributed light field with extended depth-of-focus. Here, a high-efficiency extended depth-of-focus metalens is proposed by adjoint-based topology-shape optimization approach, wherein the theoretical electric field intensity corresponding to a variable focal-length phase is utilized as the figure of merit. Using a dozen of metalens with random structure parameters as initial structures, the average focal depth of topology-shape optimized metalens is greatly improved up to 18.80 μm (about 29.7λ), which is 1.54 times higher than the diffraction-limited focal depth. Moreover, all the topology-shape optimized metalens exhibit high diffraction efficiency exceeding 0.7 over the whole focal depth range, which is approximately three times greater than that of the forward design. Our results offer a new insight into the design of extended depth-of-focus metalens and may find potential applications in imaging, holography, and optical fabrication.

Metasurfaces based on the Pancharatnam–Berry (PB) phase have attracted significant attention in the domains of subwavelength optics and electromagnetics. Conventional theory predicts that the PB phase is exactly twice the rotation angle of the anisotropic meta-atoms. Differently, a recent advance has demonstrated that the generalized PB phase representing multiple times of the rotation angle could be obtained with high-fold rotational symmetry meta-atoms, but it suffers from the low cross-polarization conversion efficiency (the theoretical upper limit of 25%) that impedes its further applications, especially for meta-atoms with rotational symmetry ≥3. Here, we verify that the chiral meta-atoms with high-fold rotational symmetries could produce the generalized PB phase. Besides, the all-metallic configuration is utilized to design C2, C3, and C5 chiral catenary meta-atoms to improve their efficiency and bandwidth. The equivalent air waveguide with low loss between two adjacent meta-atoms is formed to analyse the higher performances of the all-metallic scheme for the realization of the generalized PB phase compared with the metal–insulator–metal and all-dielectric C3 meta-atoms. As a proof of concept, four metadevices including two spin-Hall metadevices and two holograms are experimentally demonstrated and their maximum efficiency could exceed 83% in simulation. This work could provide a high-efficiency platform for the study of the generalized PB phase in linear and nonlinear optics.

Reconfigurable metasurfaces have exhibited significant potential in wireless communication owing to their capacity to transmit information without relying on traditional complex radio frequency (RF) chain transmitters. Nonetheless, the majority of metasurface‐based wireless communication systems modulate signals only in the time domain. Here, an amplitude‐phase reconfigurable metasurface is proposed to establish a wireless communication system that can simultaneously transmit different messages to users by encoding digital signals within the spatial domain. By changing the bias voltages of varactors integrated in the meta‐atom, the reconfigurable metasurface can achieve independent 3‐bit phase and 1‐bit amplitude coding. Through a beamforming methodology, the proposed metasurface generates diverse scattering beams with suppressed sidelobe levels, which not only enables multiple channels through space coding but also reduces signal leakage in undesired directions. Numerical simulations and experiments are carried out to verify the beamforming scheme, and a dual‐channel wireless communication system is established. The results show that two distinct images can be simultaneously retrieved by two separate users, which demonstrates the dual‐channel transmission capability of the wireless communication system. The proposed strategy opens up an avenue for implementing multi‐channel wireless communication systems, which indicates its great potential in multiple‐user collaborative wireless communication and radar systems. [ABSTRACT FROM AUTHOR]

Optical imaging systems, like microscopes, cameras, and telescopes, continue to expand the scope of human observation of the world. As one of the key indicators of imaging systems, the field-of-view (FOV) is often limited by coma aberration. Expanding it generally relies on a combination of complex lenses, leading to a bulky and cumbersome system. Recently, the emergency of meta-optics provides an alternative to constructing compact and lightweight large-FOV metalens through elaborated phase modulation within a flat surface, showing great potential in surveillance, unmanned vehicles, onboard planes or satellites, medical science, and other new applications. In this article, we review recent advances of wide-angle metalenses, including operation principles, design strategies, and application demos. Firstly, basic principles of wide-angle imaging using a single metalens are interpreted. Secondly, some advanced methods for designing subwavelength structures with high angle robustness and high efficiency are discussed. Thirdly, some representative functional devices and applications are surveyed. Finally, we conclude with an outlook on future potentials and challenges that need to be overcome.

Spatial differentiator is the key element for edge detection, which is indispensable in image processing, computer vision involving image recognition, image restoration, image compression, and so on. Spatial differentiators based on metasurfaces are simpler and more compact compared with traditional bulky optical analog differentiators. However, most of them still rely on complex optical systems, leading to the degraded compactness and efficiency of the edge detection systems. To further reduce the complexity of the edge detection system, a monolithic metasurface spatial differentiator is demonstrated based on asymmetric photonic spin-orbit interactions. Edge detection can be accomplished via such a monolithic metasurface using the polarization degree. Experimental results show that the designed monolithic spatial differentiator works in a broadband range. Moreover, 2D edge detection is experimentally demonstrated by the proposed monolithic metasurface. The proposed design can be applied at visible and near-infrared wavelengths by proper dielectric materials and designs. We envision this approach may find potential applications in optical analog computing on compact optical platforms.

Self-accelerating beams show considerable captivating phenomena and applications owing to their transverse acceleration, diffraction-free and self-healing properties in free space. Metasurfaces consisting of dielectric or metallic subwavelength structures attract enormous attention to acquire self-accelerating beams, owing to their extraordinary capabilities in the arbitrary control of electromagnetic waves. However, because the self-accelerating beam generator possesses a large phase gradient, traditional discrete metasurfaces suffer from insufficient phase sampling, leading to a low efficiency and narrow spectral band. To overcome this limitation, a versatile platform of catenary-inspired dielectric metasurfaces is proposed to endow arbitrary continuous wavefronts. A high diffraction efficiency approaching 100% is obtained in a wide spectral range from 9 to 13 μm. As a proof-of-concept demonstration, the broadband, high-efficiency and high-quality self-accelerating beam generation is experimentally verified in the infrared band. Furthermore, the chiral response of the proposed metasurfaces enables the spin-controlled beam acceleration. Considering these superior performances, this design methodology may find wide applications in particle manipulation, high-resolution imaging, optical vortex generation, and so forth.

Geometric metasurfaces have shown superior phase control capacity owing to the geometric nature of their phase profile. The existing geometric metasurfaces are generally composed of metal-dielectric composites or all-dielectric subwavelength structures. Here, a novel configuration, all-metallic structure, is proposed to achieve broadband and high-performance electromagnetic wavefront manipulation based on the geometric phase. A catenary model is built to describe the optical dispersion and guide the design of metasurfaces. Two metadevices including a beam deflector and a hologram are designed and experimentally demonstrated in the infrared regime, with the measured optical efficiency up to 84% (the simulated efficiency reaches 93%). Compared to previous metal-insulator-metal structures, this approach can realize higher efficiency and broader operating bandwidth owing to its lower ohmic loss. This design strategy is universal and can be easily scaled to any other spectra without complex optimization. Moreover, since metals have excellent mechanical and physical properties, such as good thermal and electrical conductivity, this all-metallic structure may provide a new thinking on interdisciplinary research.

Structural colors emerge when a particular wavelength range is filtered out from a broadband light source. It is regarded as a valuable platform for color display and digital imaging due to the benefits of environmental friendliness, higher visibility, and durability. However, current devices capable of generating colors are all based on direct transmission or reflection. Material loss, thick configuration, and the lack of tunability hinder their transition to practical applications. In this paper, a novel mechanism that generates high-purity colors by photon spin restoration on ultrashallow plasmonic grating is proposed. We fabricated the sample by interference lithography and experimentally observed full color display, tunable color logo imaging, and chromatic sensing. The unique combination of high efficiency, high-purity colors, tunable chromatic display, ultrathin structure, and friendliness for fabrication makes this design an easy way to bridge the gap between theoretical investigations and daily-life applications.

Optical camouflage is a magical capability of animals as first noticed in 1794 by Erasmus Darwin in Zoonomia, but current biomimetic camouflage strategies cannot be readily applied in complex environments involving multispectral and in particular multi-polarization detection. Here we develop a plasmonic approach toward broadband infrared polarimetric crypsis, where the polarized thermal emission near the pseudo-Brewster angle is the main signal source and no existing polarizing camouflage technique has been discovered in nature. Based on all-metallic subwavelength structures, an electrodynamic resistance-reduction mechanism is proposed to avoid the significant polarization-dependent infrared absorption/radiation. It is also found that the structured metal surface presents giant extrinsic anisotropy regarding the phase shift between orthogonal polarization states, which helps to realize ultrahigh-efficiency and tunable polarization conversion in an unprecedented manner. Finally, we note that the catenary optical theory may provide a useful means to explain and predict these unusual performances.