Search

The work presented is a preliminary study for the development of a method for the extraction of pesticides from wax samples by means of superficial fluid extraction. The novelty of the study is the direct extraction of the pesticides from raw wool wax without any cleanup, as direct extraction has been considered almost impossible by many authors. [ABSTRACT FROM AUTHOR]

This study aims to develop a solver to calculate the dispersion of emitted odour from the main sources located in a large urban wastewater treatment plant (WWTP). Its seasonal odour impact on surrounding areas, including nearby populations, was also evaluated. Different seasons of the year were studied using the prevailing meteorological conditions in each case, within the framework of a Eulerian model. Dynamic olfactometry was used to measure the odour concentration (OC) of the main emission sources of the WWTP, with such data being input parameters of the model. The calculations were carried out by a robust and precise fully-implicit-temporal-discretisation scheme and an exponential spatial scheme (in the control volume formulation), which was solved using the Modified Strongly Implicit (MSI) method. A code in the programming language Fortran90 was developed to calculate the odour immission concentration (OIC). Odour emissions from the WWTP were found to derive mainly from the wastewater line, which contributed with 98.86% of the total emission of the facility, with odour emission rates (OERs) as high as 62,100 ou E /s, 55,800 ou E /s, 88,400 ou E /s and 11,300 ou E /s in the pre-treatment header, sand and fat removal, primary settling and biological treatment, respectively. Such values corresponded to summer, which is the season that registered the most intense emissions. The first two odour sources and the units for gravity thickening, flotation thickening and sludge dehydration consisted of odour treatment systems based on adsorption by granular activated carbon (GAC). Gravity thickening achieved the highest OER value (1500 ou E /s) in the sludge line, but this only contributed with 1.14% to the total emission of the WWTP. Similar OER values were observed in other seasons of the year, although somewhat lower. The highest odour impact (538 ou/m 3 ) was predicted in the south direction in autumn, which corresponded to the lowest wind speed in the main direction (1.23 m/s)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Nitrification of ammoniacal nitrogen (N-NH 4 + ) to nitrate (N-NO 3 - ) was investigated in a lab-scale sequencing batch reactor (SBR) to evaluate its efficiency. During the nitrification process the removal of N-NH 4 + reached 96%, resulting in 73% formation of N-NO 3 - . A lineal correlation (r 2  = 0.9978) was obtained between the concentration of volatile suspended solids (VSS) and the maximal N-NO 3 - concentration at the end of each batch cycle under stationary state. The bacterial taxons in the initial inoculum were identified, revealing a complex diverse community mainly in the two major bacterial phyla Proteobacteria and Actinobacteria. The FAPROTAX algorithm predicted the presence in the inoculum of taxa involved in relevant processes of the nitrogen metabolism, highlighting the bacterial genera Nitrospira and Nitrosomonas that are both involved in the nitrification process. A kinetic model was formulated for predicting and validating the transformation of N-NH 4 + , N-NO 2 - and N-NO 3 - and the removal of organic and inorganic carbon (TOC and IC, respectively). The results showed how the increase in biomass concentration slowed down the transformation to oxidised forms of nitrogen and increased denitrification in the settling and filling stages under free aeration conditions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Urban sewage sludge (SL) is a major concern due to the number of environmental problems it causes. Its application for different purposes is strictly regulated, limiting the possibilities of recycling and reusing this material. Thus, in this work, a complete study of a simple method to convert SL into activated carbon (AC) was carried out. The comprehensive study involves an evaluation of the main process parameters, such as the activating agent (AA) content (25 %, 33 %, 50 %), using the lowest amount of AA as novelty, different pyrolysis temperatures (600 and 800 °C), and purification conditions (6 M HCl:AC ratio, v:w). Under controlled and optimised conditions and through a single combined activation and pyrolysis step followed by acid purification, ACs with well-developed porosity can be obtained. Surface area values of around 870 m 2 /g and over 60 % carbon content were achieved, demonstrating that the prepared ACs could have applications in a wide variety of fields as high-value products. As an innovative aspect in this research, the gases streams and liquid effluents generated during the global process were analysed, achieving elimination of over 63 % of the concentration of the chemical elements contained in the SL during the chemical purification stage. Finally, mass, energy, and economic balances were carried out to estimate the production cost of AC derived from SL (<€ 8/kg AC)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

In this study, five urban WWTPs (Wastewater Treatment Plant) with different biological treatment (Extended Aeration Activated Sludge - EAAS; Rotating Biological Contactor - RBC), wastewater type (Urban; Industrial) and size, were jointly evaluated. The aim was twofold: (1) to analyze and compare their odor emissions, and (2) to identify the main causes of its generation from the relationships between physico-chemical, respirometric and olfactometric variables. The results showed that facilities with EAAS technology were more efficient than RBC, with elimination yields of organic matter higher than 90%. In olfactometric terms, sludge managements facilities (SMFs) were found to be the critical odor source in all WWTPs compared to the Inlet point (I) or Post primary treatment (PP), and for seasonal periods with ambient temperature higher than 25 °C. Moreover, the global odor emissions quantified in all SMFs revealed that facilities with EAAS (C-WWTP, V-WWTP and Z-WWTP) had a lower odor contribution (19,345, 14,800 and 11,029 ou E /s·m 2 , respectively) than for those with RBC technology (P-WWTP and NC-WWTP) which accounted for 19,747 ou E /s·m 2 and 80,061 ou E /s·m 2 , respectively. In addition, chemometric analysis helped to find groupings and differences between the WWTPs considering the wastewater (71.27% of total variance explained) and sludge management (64.52% of total variance explained) lines independently. Finally, odor emissions were adequately predicted from the physico-chemical and respirometric variables in the wastewater (r 2  = 0.8738) and sludge (r 2  = 0.9373) lines, being pH, volatile acidity and temperature (wastewater line), and pH, moisture, temperature, SOUR (Specific Oxygen Uptake Rate) and OD 20 (Cumulative Oxygen Demand at 20 h) (sludge line) the most influential variables., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Background: The prevalence of chronic pain in Spain is 17%. There is a need for more scientific data on non-drug treat-ments that can be effectively used to treat chronic pain. The aim of this study is to analyze how patients with chronic non-malignant pain perceive non-drug approaches., Method: Mixed, descriptive and phenomenological study. Nineteen patients enrolled in a workshop on pain management and non-drug treatments that consisted of four sessions (one session a week). Each session lasted four hours. The patients then participated in a reflective writing activity about their personal experiences. Data from this activity was then ana-lyzed. Atlas.ti 8 software was used for the qualitative data analysis., Results: Sixteen participants tried an alternative therapy and fourteen assessed its benefits. The participants' expecta-tions were divided into three groups of similar size: relief from physical pain, emotional pain management and tools for use in daily life. All the participants were satisfied with the workshop. Perceived personal benefits were better pain and sleep management, reduced fatigue, reduced drug consumption; a more positive approach to life, better mood, more positive energy, more motivation and improved capacity to cope., Conclusions: The participants commented that the workshop had helped them to reduce pain levels and consume to fewer analgesics, and had reduced other symptoms associated with chronic disease, thus improving their perceived health. They also expressed great satisfaction with the organization and teachers.

Biological techniques are widely used to treat gaseous streams derived from waste treatment plants. The generation of volatile organic compounds (VOCs) is one of the principal pollution sources in composting facilities from which nuisance odours are released. In addition, the generation of photochemical smog with other gases such as NO X can produce ozone at ground level due to their photochemical ozone creation potential (POCP). In this work, the performance of an industrial biofilter was evaluated from an environmental point of view. Specifically, this study evaluated the potential impact in terms of photochemical oxidation and odour emission derived from composting in a vessel under four different aeration conditions. Gas chromatography-time-of-flight mass spectrometry (GC-TOFMS) was used to perform the chemical characterisation of the gaseous streams, while dynamic olfactometry was used to carry out the sensorial analysis. A total of 95 compounds belonging to 12 different families of VOCs were selected. Principal component analysis revealed the influence of each VOC family on each impact category and explained 88% of the total variance. Multivariate regression was used to study the correlation between photochemical oxidation and odour impact, which has never been reported before. The correlations obtained (r ≥ 0.97) evidenced the direct relationship between these two impacts. Photochemical oxidation and odour emission were proven to be important environmental impacts derived from composting facilities, whose abatement might be carried out by biofiltration systems., (Copyright © 2020 Elsevier Inc. All rights reserved.)

In the present study, physico-chemical characteristics, heavy metals content, odour emissions, microbial enumeration and enzymatic activities were analysed during industrial scale composting of sewage sludge partially pre-treated to evaluate the effect of a combined system of semi-permeable film and aeration on these parameters. The results related to physico-chemical parameters showed a decrease in total organic carbon (TOC), organic matter (OM), total carbon (TC) along the process. Volatile solids (VS) were also reduced, reaching 36% at 120 days, which is above the limit according to the current legislation. Similarly, metal content was found to be an important variable in the evolution of enzymatic activity, while lead (Pb), zinc (Zn), and nickel (Ni) were the most influential. Moreover, heavy metals were found below the limit of type B compost quality or European class 2 at the end of the process, which is suitable for agriculture soil. The odorous impact generated during the hydrolytic stage was reduced to an average value of 4 ou E /s. This suggests that, covered stage with the semi-permeable film, could be a viable solution to mitigate odour emissions. The highest temperature was reached at 10 days and it was favoured by semi-permeable film. Temperature promoted the presence of thermophilic bacteria and fungi and indicated an early biodegradation process mediated by microorganisms. Statistical analyses revealed a high correlation of physico-chemical variables with microbial activity. Thus, samples from the first 14 days were highly correlated with enzymatic activities such as β-glucosidase (Ac-βGlu), protease (Ac-Pr), and dehydrogenase (Ac-De), which have usually been involved in the hydrolysis of organic matter., (Copyright © 2019 Elsevier Inc. All rights reserved.)

The aim of this study was to assess the odor immission derived from full-scale composting of different abundant and highly pollutant organic waste: sewage sludge with bulking agent (SL), sewage sludge pretreated through anaerobic digestion and supplemented with bulking agent (SL-AD), and market waste with olive leaves (MW-OL). The combination of dynamic olfactometry and Gaussian dispersion modeling allowed both the quantification of odor emissions from each waste and the evaluation of their global odorous impact in nearby urban areas. Wind speed, summer and winter seasons, and atmospheric conditions were considered in the dispersion model. The results revealed that high wind speed (2.6 m/s) increases the global odor immission in summer season, independently of atmospheric stability. However, the maximum odor immission concentration recommended for composting process was not exceeded in any case, which depends on each country/region. The experimental results also enable to evaluate the influence of several physico-chemical variables on odor emissions derived from composting. The removal of nitrogen and volatile solids was the main cause for odor generation. Moreover, the microbiological activity of each substrate was monitored throughout the process and different percentages of biodegradability were quantified depending on the type of substrate and pretreatment applied., (Copyright © 2018 Elsevier Inc. All rights reserved.)

In an economic context marked by increasing energy costs and stricter legislation regarding the landfill disposal of wastewater treatment plant (WWTP) sewage sludge, and where biomethanization is difficult to implement in small WWTPs, an efficient alternative is required to manage this polluting waste. This study shows that autothermal thermophilic aerobic digestion (ATAD) is a feasible technique for treating sewage sludge in small- and medium-sized towns. The experiments were carried out at pilot scale on a cyclical basis and in continuous mode for nine months. The main results showed an optimal hydraulic retention time of 7 days, which led to an organic matter removal of 34%. The sanitized sludge meets the microbial quality standards for agronomic application set out in the proposed European sewage sludge directive. An economic assessment for the operation of ATAD technology was carried out, showing a treatment cost of €6.5/ton for dewatered sludge., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

In this research study, the co-composting process of a waste mixture containing strawberry extrudate, fish waste, sewage sludge and bulking agent (SEFW, 190:1:22:90 ratio) was carried out in a dynamic-solid respirometer at pilot scale. The aerobic biodegradability of the mixture was previously ensured in a static-liquid respirometer. The advantages and drawbacks of the SEFW co-composting process were subsequently identified through the determination of respirometric activity and the physical-chemical characterization of the waste, as well as the monitoring of odor emissions. The evolution of the physical-chemical variables showed that pH increased slightly and that the organic matter concentration, expressed as volatile solids (VS, %) or oxidable organic carbon (C OXC , %), decreased by around 15% in both cases and by approximately 56% in its biodegradable form (total organic carbon, TOC, %). The low odor emission rate (OER) in the least favorable scenario (the maximum odor generation) during SEFW composting was 1.59 ou E /s, whereas this figure reached 3.52 ou E /s when only the organic fraction of municipal solid waste (OFMSW) was composted. Consequently, the co-composting of SEFW is more favorable in terms of odor emission and permits the simultaneous treatment of different types of waste., (Copyright © 2017. Published by Elsevier Ltd.)

In this study, the evolution of odour concentration (ouE/m(3)STP) emitted during the pile composting of the organic fraction of municipal solid waste (OFMSW) was monitored by dynamic olfactometry. Physical-chemical variables as well as the respirometric variables were also analysed. The aim of this work was twofold. The first was to determine the relationship between odour and traditional variables to determine if dynamic olfactometry is a feasible and adequate technique for monitoring an aerobic stabilisation process (composting). Second, the composting process odour impact on surrounding areas was simulated by a dispersion model. The results showed that the decrease of odour concentration, total organic carbon and respirometric variables was similar (around 96, 96 y 98% respectively). The highest odour emission (5224 ouE/m(3)) was reached in parallel with the highest microbiological activity (SOUR and OD20 values of 25 mgO2/gVS · h and 70 mgO2/gVS, respectively). The validity of monitoring odour emissions during composting in combination with traditional and respirometric variables was demonstrated by the adequate correlation obtained between the variables. Moreover, the quantification of odour emissions by dynamic olfactometry and the subsequent application of the dispersion model permitted making an initial prediction of the impact of odorous emissions on the population. Finally, the determination of CO2 and CH4 emissions allowed the influence of composting process on carbon reservoirs and global warming to be evaluated., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

This study is focused on the optimisation of the electrochemical decolourisation of textile effluents containing reactive dyes with the aim of making feasible-technically and economically-this method at industrial scale. Coloured waters were treated in continuous at low current density, to reduce the electrical consumption. Ti/PtO(x) electrodes were used to oxidize simulated dyebaths prepared with an azo/dichlorotriazine reactive dye (C.I. Reactive Orange 4). The decolourisation yield was dependent on the dyeing electrolyte (NaCl or Na(2)SO(4)). Dyeing effluents which contained from 0.5 to 20 gl(-1) of NaCl reached a high decolourisation yield, depending on the current density, immediately after the electrochemical process. These results were improved when the effluents were stored for several hours under solar light. After the electrochemical treatment the effluents were stored in a tank and exposed under different lighting conditions: UV light, solar light and darkness. The evolution of the decolourisation versus the time of storage was reported and kinetic constants were calculated. The time of storage was significantly reduced by the application of UV light. A dye mineralization study was also carried out on a concentrated dyebath. A TOC removal of 81% was obtained when high current density was applied for a prolonged treatment with recirculation. This treatment required a high electrical consumption.

The motile, predominantly square-shaped, red archaeon strain 801030/1T, isolated from a brine pool in the Sinai peninsula (Egypt), was characterized taxonomically. On the basis of its polar lipid composition, the nucleotide sequences of its two 16S rRNA genes, the DNA G+C content (60.1 mol%) and its growth characteristics, the isolate could be assigned to the genus Haloarcula. However, phylogenetic analysis of the two 16S rRNA genes detected in this organism and low DNA-DNA hybridization values with related Haloarcula species showed that strain 801030/1T is sufficiently different from the recognized Haloarcula species to warrant its designation as a new species. A new species, Haloarcula quadrata, is therefore proposed, with strain 801030/1T (= DSM 11927T) as the type strain.

The 16S rRNA gene sequences of Halococcus saccharolyticus and Halococcus salifodinae were closely related (94.5-94.7% similarity) to that of Halococcus morrhuae, the type species of the genus Halococcus. However, Halococcus turkmenicus was distinct from the other members of this genus, with low 16S rRNA similarities when compared to Halococcus morrhuae (88.7%). On the basis of phylogenetic tree reconstruction, detection of signature bases and DNA-DNA hybridization data, it is proposed to transfer Halococcus turkmenicus to a novel genus, Haloterrigena, as Haloterrigena turkmenica gen. nov., comb. nov., and to accommodate Halobacterium trapanicum JCM 9743 and strain GSL-11 in the same species. On the basis of morphological, cultural and 16S rRNA sequence data, it is also proposed that the culture collection strains of Halobacterium trapanicum NCIMB 767, ATCC 43102 and JCM 8979 should be renamed as Halococcus sp.

Four strains isolated from European eels in Valencia, Spain, were found to constitute a DNA relatedness group which is 0 to 50% related to the 13 species and DNA group 11 of the genus Aeromonas. Phenotypically, these strains have all of the properties that define the genus Aeromonas. However, they differ from the previously described Aeromonas species by three or more properties. The strains are positive for motility, growth at 37 degrees C, indole production, and arginine dihydrolase activity. They exhibit negative reactions in tests for growth at 42 degrees C and in thiosulfate-citrate-bile salts-sucrose medium (Oxoid), Simmons citrate tests, and tests for lysine and ornithine decarboxylase activities. They produce acid from salicin but not from L-arabinose, D-cellobiose, or lactose. All four strains hydrolyze esculin and arbutin but not elastin. They use L-serine as a sole carbon and energy source but cannot utilize L-arabinose, L-arginine, D-gluconate, or L-glutamine. The strains are resistant to ampicillin. The guanine-plus-cytosine content of the DNA is 59.4 to 60.8 mol%. The name Aeromonas encheleia sp. nov. is proposed for these strains; strain S181 (= CECT 4342) is the type strain. This new species is generally not pathogenic for eels or mice.

The genomic relatedness among three Aeromonas allosaccharophila strains, including the type strain, and other Aeromonas type and reference strains that were assigned to DNA hybridization groups was estimated by DNA-DNA hybridization (competition procedure using a membrane method). All A. allosaccharophila strains were highly related (70 to 100%) to strains 289T (= CECT 4199T) and ATCC 35942. Type strains of other validated Aeromonas species, reference strains of DNA groups 8 and 11, and the Aeromonas sp. strain ATCC 43946 (enteric group 501) were 0 to 41% related to A. allosaccharophila 289T and ATCC 35942. The G+Cs content of A. allosaccharophila strains were in the range 55.9 to 57.3 mol%. The G+C content of the type strain of this species was 56.9 mol%, a value somewhat lower than that reported in the original description.