Search

Abstract Backgrounds The incidence of extramedullary diseases (EMDs) in patients diagnosed with acute myeloid leukemia (AML) is approximately 10–20%. These patients exhibit a significantly distinct etiology, therapeutic response, and prognosis compared to patients without EMDs. CLL1 CAR-T therapy has been demonstrated satisfactory efficacy and safety in the treatment of refractory and relapsed AML patients. However, concerns have been raised regarding the potential impact of extramedullary niduses on the effectiveness of CLL1 CAR-T therapy. Methods A total of 47 patients were enrolled in this study, including 27 patients with isolated AML tumor bone marrow infiltration and 20 patients with both extramedullary and bone marrow infiltration of AML. CLL1 CAR-T cells were manufactured and subjected to rigorous quality control in the hematology laboratory of Tianjin First Central Hospital. The efficacy and adverse reactions were assessed following CAR-T cell infusion, while expansion of CAR-T cells, levels of cytokines releasing, and other indicators were closely monitored. Results Among the 20 patients with EMDs and the 27 individuals without EMDs, complete remission in bone marrow was achieved by 65.00% and 81.48% of patients, respectively. Meanwhile, among the patients with EMDs, 55.00% achieved complete remission while 10.00% achieved partial remission when assessing the efficacy of CLL1 CAR-T cells against extramedullary niduses. Although the overall survival, progression-free survival, and duration of remission period appeared to be shorter for patients with EMDs compared to those without EMDs, this difference did not reach statistical significance. The incidence rates of complications were comparable between both groups. Meanwhile, there were no significant differences observed in the levels of CAR-T cell expansion and accompanying cytokines release between patients with and without EMDs. Conclusions Our study findings have demonstrated the efficacy of CLL1 CAR-T therapy in the treatment of AML patients with EMDs, while also indicating manageable occurrence rates of complications within a tolerable range. The CLL1 CAR-T therapy, serving as an ideal strategy for AML patients irrespective of the presence of EMDs, effectively ameliorates the conditions of AML patients and provides them with an opportunity to undergo curative hematopoietic stem cell transplantation while significantly enhancing their prognosis.

Thrombosis and infection are two major complications associated with central venous catheters (CVCs), which significantly contribute to morbidity and mortality. Antifouling coating strategies currently represent an efficient approach for addressing such complications. However, existing antifouling coatings have limitations in terms of both duration and effectiveness. Herein, we propose a durable zwitterionic polymer armor for catheters. This armor is realized by pre-coating with a robust phenol-polyamine film inspired by insect sclerotization, followed by grafting of poly-2-methacryloyloxyethyl phosphorylcholine (pMPC) via in-situ radical polymerization. The resulting pMPC coating armor exhibits super-hydrophilicity, thereby forming a highly hydrated shell that effectively prevents bacterial adhesion and inhibits the adsorption and activation of fibrinogen and platelets in vitro. In practical applications, the armored catheters significantly reduced inflammation and prevented biofilm formation in a rat subcutaneous infection model, as well as inhibited thrombus formation in a rabbit jugular vein model. Overall, our robust zwitterionic polymer coating presents a promising solution for reducing infections and thrombosis associated with vascular catheters.

An improved laminated structure model of LED systems is proposed. Besides the light-emitting diode (LED) chip, printed circuit board (PCB) substrate, heat sink, etc, additional interface layers are applied to model the non-ideal surface of thermal interface materials (TIMs). And a rapid calculation method is developed for temperature-related calculations. Through comparisons, the method is proved to be valid, and the execution time can be greatly reduced. It is found that the air gap at the TIM surface does hinder heat conduction but the effect is not obvious. The influence of LED chips on system thermal management is comprehensively analyzed. For a single LED chip, the junction temperature shows a linear relationship with its thermal resistance and heat power. The chip size, as well as the aspect ratio between the chip and the PCB substrate, has great effects on the junction temperature. For a multi-chip array, the impact of the chip quantity is suggested to be considered combined with the chip layout. The mutual thermal interaction among LED chips is of most concern, which will become more serious with an increasing number of chips. The work provides a rapid and flexible evaluation method for thermal management of LED systems.

Abstract Unsaturated polyester resins (UPRs) are expansively used in different applications and recycling the significant amounts of UPR waste is still a universal problem. Vitrimerization is a feasible, environmental‐friendly, cost effective, and operative method, which can be used for recycling the crosslinked UPRs. In this method, the thermoset permanent network is changed into a dynamic network similar to the vitrimer‐type polymers. The results show that the existence of a transesterification catalyst in the system significantly enhances the efficiency of vitrimerization. The vitrimerized UPR thermosets can be reprocessed three times with mechanical properties comparable to the initial UPR. The results show that the excess of external hydroxyl groups in the system can prevent the formation of zinc ligand complexes in the network and consequently reduce the crosslinked density and mechanical properties of vitrimerized samples. The vitrimerized thermoset powder can be reprocessed through injection molding, extrusion, and compression molding which are conventional thermoplastic processing techniques. The unrecyclable UPR thermoset wastes can be recycled and reused through vitrimerization with the least loss in mechanical properties.

Although the light-emitting diode (LED) has been developed into relative maturity, thermal management remains an important problem for high-power LEDs. To obtain the temperature distribution and improve the heat dissipation of high-power LED systems, an $N$ -layer model which is flexibly applied to different LED packaging structures is proposed, where the equivalent method of heatsinks is also included. The corresponding analytical solutions to temperature field and thermal resistance are generalized to Nth to adapt to the model. The method is proved to be accurate and time-saving in comparison with finite element method (FEM) simulations. In particular, it has obvious advantages in dealing with the thin layer analysis where the target region is much smaller than the entire model. By calculating the junction temperature and thermal resistance of an example LED module, the method is demonstrated in detail. Effects of printed circuit board (PCB) composition and heatsink on heat dissipation are analyzed, and the related thermo-mechanisms are revealed in terms of thermal resistance. This work may have significance for the design work of high-power LED systems.

Short tandem repeats (STRs) play an essential role in forensic genetics due to their high degree of polymorphisms, wide distributions and easy detection method. In this study, allelic frequencies and forensic statistical parameters of the 19 autosomal STR loci in a Kazak ethnic group were calculated, and its genetic relationships with reference populations were assessed in order to understand population structure better and enrich population genetic data for forensic practice in Chinese Kazak ethnic group. There were 226 identified alleles with the corresponding allelic frequencies ranging from 0.0008 to 0.5295 in the 628 unrelated healthy Kazak individuals in Xinjiang Uygur Autonomous Region. All autosomal STRs were conformed to the Hardy-Weinberg equilibrium after Bonferroni’s correction. The cumulative power of discrimination and the combined probability of exclusion of all the 19 autosomal STRs were 0.999 999 999 999 999 999 999 997 162 and 0.999 999 994 484, respectively. Furthermore, the DA distances and Fixation index values of pairwise populations, principal component analysis, multidimensional scaling analysis, phylogenetic tree analysis and structure analysis were conducted to probe the genetic relationships between the Kazak group and other reference populations. The population genetic results showed that these 19 autosomal STR loci were characterised by high genetic diversities in the Kazak group. Furthermore, the studied Kazak group had close genetic relationships with the Uyghur group and the Uzbek group. The present results may facilitate understanding the genetic background of the Chinese Xinjiang Kazak group.

Based on the official data modeling, this paper studies the transmission process of the Corona Virus Disease 2019 (COVID-19). The error between the model and the official data curve is quite small. At the same time, it realized forward prediction and backward inference of the epidemic situation, and the relevant analysis help relevant countries to make decisions.

To realize continuous real-time monitoring of the large-scale internal strain field of coal and rock mass, a bidirectional strain sensor based on FBGs encapsulated using a hollow cylindrical steel tube was designed. The sensor’s structural parameters were optimized through unidirectional loading, and the strain change laws of the sensor were analyzed under unidirectional and bidirectional loading conditions, in which the stress-strain fitting curves of the sensor and the relationships of the strain in the vertical and horizontal directions were obtained under different lateral pressure loading conditions. A similar theoretical model was established to verify the accuracy of the linear relationship between the surrounding rock stress and the strain measured by the sensor system.

Abstract Background Individual identification is one of the most important tasks in the field of forensic genetics. Insertion/Deletion (InDel) polymorphism marker has been a promising marker for individual identification. However, a part of InDel loci in commonly used commercial kit show low polymorphisms in Chinese populations. Methods We evaluated a panel of 35 InDel loci constructed previously for individual identifications in Hui group. Subsequently, population data of three Chinese populations from 1,000 Genomes Project database were used to evaluate individual identification performance of these 35 InDels. Forensic parameters, such as heterozygosity, power of exclusion, match probability and power of discrimination, were calculated to evaluate the forensic efficiency of these loci in Hui group. The heatmap of insertion allelic frequencies, Nei's genetic distances, pairwise fixation index values, principal component analyses and admixture analyses were used to analyze the genetic differentiations and structure between Hui group and other populations. Results In studied Hui group, besides rs3054057, polymorphism information content values of the remaining loci were greater than 0.3. Values of expected heterozygosity of these loci were close to 0.5. The combined power of discrimination and power of exclusion values were 0.99999999999999659609 and 0.998682, respectively. Analyses of population genetics revealed that Chinese Hui group had closer genetic relationships with East Asian populations than other intercontinental populations. Conclusion The forensic statistical analyses revealed these loci showed relatively high genetic polymorphisms in Chinese Hui group, and could be served as a useful tool for individual identifications in Hui group. Population genetic evaluations indicated that Chinese Hui group had close genetic relationships with East Asian populations.

China is a multinational country composed of 56 ethnic groups of which the Han Chinese accounts for 91.60%. Qinghai Province is located in the northeastern part of the Qinghai–Tibet Plateau, has an area of 72.12 km2, and is the fourth largest province in China. In the present study, we investigated the genetic polymorphisms of 20 short tandem repeat (STR) loci in a Qinghai Han population, as well as its genetic relationships with other populations. A total of 273 alleles were identified in 2 000 individuals at 20 loci, and the allelic frequency ranged from 0.000 2 to 0.532 7. The 20 STR loci showed a relatively high polymorphic rate in the studied group. Observed and expected heterozygosities ranged 0.613 0–0.907 5 and 0.614 8–0.920 0, respectively. The combined power of discrimination, and the probability of exclusion in duo and trio cases were 0.999 999 999 999 999 999 999 999 34, 0.999 996 0 and 0.999 999 996 5, respectively. Analyses of interpopulation differentiation revealed that the most significant differences were found between the Qinghai Han and Malaysian, while no significant differences were found between the Qinghai Han and Han people from Shaanxi and Jiangsu. The results of principal component analysis, multidimensional scaling analysis and phylogenetic reconstructions also suggested the close relationships between the Qinghai Han and other two Han populations. The present results, therefore, indicated that these 20 STR loci could be used for paternity testing and individual identification in forensic applications, and may also provide information for the studies of genetic relationships between Qinghai Han and other groups.

Short tandem repeats (STRs) with a high level of polymorphisms and convenient detection method play an indispensable role in human population and forensic genetics. Recently, we detected the 21 autosomal non-combined DNA index system (non-CODIS) STR loci in a Kyrgyz ethnic group, calculated their forensic parameters and analysed its genetic relationships with reference populations from China. In total, 168 alleles were observed at 21 non-CODIS STRs with corresponding allelic frequencies from 0.0016 to 0.4788. No significant deviations at these STRs were observed from the Hardy–Weinberg equilibrium. The values of cumulative power of discrimination and probability of exclusion for all the 21 non-CODIS STRs were 0.99999999999999999998835 and 0.9999994002, respectively. Furthermore, the analyses of phylogenetic trees, genetic distances and interpopulation differentiations demonstrated that the Kyrgyz group had relatively close genetic relationships with the Uygur and Kazak groups. These 21 non-CODIS STRs were characterized by high genetic diversities in the Kyrgyz group and could be applied as a robust tool for individual identification and kinship testing in forensic sciences.