Search

Author(s): K. A. Darling [1]; M. Rajagopalan [2]; M. Komarasamy [3]; M. A. Bhatia [2]; B. C. Hornbuckle [1]; R. S. Mishra [3]; K. N. Solanki (corresponding author) [2] Nanocrystalline [...]

The presence of complex states-of-stress and strain-rates directly influence the dominant deformation mechanisms operating in a given material under load. Mg alloys have shown limited ambient temperature formability due to the paucity of active slip-mechanisms, however, studies have focused on quasi-static strain-rates and/or simple loading conditions (primarily uniaxial or biaxial). For the first time, the influence of strain-rate and stress-triaxiality is utilized to unravel the active deformation mechanisms operating along the rolling, transverse- and normal-directions in wrought AZ31-alloy. It is discovered that the activation of various twin-mechanisms in the presence of multiaxial loading is governed by the energetics of the applied strain-rates. IMPACT STATEMENT It is shown for the first time that the higher deformation energy associated with dynamic strain-rates, coupled with high-triaxiality, promotes detwinning and texture evolution in HCP alloys with high c/a ratio. [ABSTRACT FROM PUBLISHER]

This study investigates differences in the soil moisture product and brightness temperatures between 6 p.m. and 6 a.m. local solar time Soil Moisture Ocean Salinity (SMOS) passes for a region in the Midwest United States. This region has uniform land cover, consisting largely of maize and soybean row crops. The comparison was restricted to periods with no rainfall. There were 19 days available for analysis of the soil moisture product. It was found that there was a significant difference in the soil moisture product for all 19 days, with lower soil moisture for most mornings. The difference between the soil moisture products on some days exceeded the allowable error of 0.04 m3 m-3. In-situ and model results indicate that there should be virtually no change in soil moisture between the evening and morning. In order to investigate this discrepancy, measured brightness temperature was converted to a polarization index (PI), and evening and morning values were compared. Investigation of the measured brightness temperature was limited to five days where a large range in incidence angles was available. Large differences between evening and morning passes were found for incidence angles less than 40° that could not be explained with radiative transfer theory but may be attributed to technical issues. There was also a difference in the PI values between the evening and morning passes for incidence angles greater than 40°. This can be caused by a decrease in soil moisture from evening to morning or could be attributed to an increase in the volumetric water content of the vegetation. [ABSTRACT FROM AUTHOR]

Energy absorption by matter is fundamental to natural and man-made processes. However, despite this ubiquity, developing materials capable of withstanding severe energy fluxes without degradation is a significant challenge in materials science and engineering. Despite recent advances in creating alloys resistant to energy fluxes, mitigating the damage caused by the absorption and transfer of mechanical energy remains a critical obstacle in both fundamental science and technological applications. This challenge is especially prominent when the mechanical energy is transferred to the material by shock loading. This study demonstrates a phenomenon in which microstructurally stabilized nanocrystalline Cu-Ta alloys can undergo reversal or nearly complete recovery of the dislocation structure after multiple shock-loading impacts, unlike any other known metallic material. The microstructure of these alloys can withstand repeated shock-wave interactions at pressures up to 12 GPa without any significant microstructural damage or deterioration, demonstrating an extraordinary capacity to be virtually immune to the detrimental effects of shock loading., (© 2024. This is a U.S. Government work and not under copyright protection in the US; foreign copyright protection may apply.)

Relationships between leaf wetness and plant diseases have been studied for centuries. The progress and risk of many bacterial, fungal, and oomycete diseases on a variety of crops have been linked to the presence of free water on foliage and fruit under temperatures favorable to infection. Whereas the rate parameters for infection or epidemic models have frequently been linked with temperature during the wet periods, leaf wetness periods of specific time duration are necessary for the propagule germination of most phytopathogenic fungi and for their penetration of plant tissues. Using these types of relationships, disease-warning systems were developed and are now being used by grower communities for a variety of crops. As a component of Integrated Pest Management, disease-warning systems provide growers with information regarding the optimum timing for chemical or biological management practices based on weather variables most suitable for pathogen dispersal or host infection. Although these systems are robust enough to permit some errors in the estimates or measurements of leaf wetness duration, the need for highly accurate leaf wetness duration data remains a priority to achieve the most efficient disease management.