Search

In the past 40 years, the treatment of locally advanced rectal cancer has evolved with the addition of radiotherapy or chemoradiotherapy and providing (neo)adjuvant systemic chemotherapy to major surgery. However, recent trends have focused on improving our ability to risk-stratify patients and tailoring treatment to achieve the best oncologic outcome while limiting the impact on long-term quality of life. Therefore, there has been increasing interest in pursuing a watch-and-wait approach to achieve organ preservation. Several retro- and prospective studies suggest safety of the watch-and-wait approach, though it is still considered controversial due to limited clinical evidence, concerns about tumor regrowth, and subsequent distant progression. To further reduce treatment, MRI risk stratification, together with patient characteristics and patient preferences, can guide personalized treatment and reserve radiation and chemotherapy for a select patient population. Ultimately, improved options for reassessment during neoadjuvant treatment may allow for more adaptive therapy options based on treatment response. This article provides an overview of some major developments in the multimodal treatment of locally advanced rectal cancer. It reviews some relevant, controversial issues of the watch-and-wait approach and opportunities to personally tailor and reduce treatment. It also reviews the overall neoadjuvant treatment, including total neoadjuvant therapy trials, and how to best optimize for a potential complete response. Finally, it provides an algorithm as an example of how such a personalized, tailored, adaptive, and reduced treatment could look like in the future.

To evaluate the efficacy of using bronchoscopically implanted anchored electromagnetic transponders (EMTs) as surrogates for 1) tumor position and 2) repeatability of lung inflation during deep-inspiration breath-hold (DIBH) lung radiotherapy.Forty-one patients treated with either hypofractionated (HF) or conventional (CF) lung radiotherapy on an IRB-approved prospective protocol using coached DIBH were evaluated for this study. Three anchored EMTs were bronchoscopically implanted into small airways near or within the tumor. DIBH treatment was gated by tracking the EMT positions. Breath-hold cone-beam-CTs (CBCTs) were acquired prior to every HF treatment or weekly for CF patients. Retrospectively, rigid registrations between each CBCT and the breath-hold planning CT were performed to match to 1) spine, 2) EMTs and 3) tumor. Absolute differences in registration between EMTs and spine were analyzed to determine surrogacy of EMTs for lung inflation. Differences in registration between EMTs and the tumor were analyzed to determine surrogacy of EMTs for tumor position. The stability of the EMTs was evaluated by analyzing the difference between inter-EMT displacements recorded at treatment from that of the plan for the CF patients, as well as the geometric residual (GR) recorded at the time of treatment.A total of 219 CBCTs were analyzed. The average differences between EMT centroid and spine registration among all CBCTs were 0.45±0.42 cm, 0.29±0.28 cm, and 0.18±0.15 cm in superior-inferior (SI), anterior-posterior (AP) and lateral directions, respectively. Only 59% of CBCTs had differences in registration 0.5 cm for EMT centroid compared to spine, indicating that lung inflation is not reproducible from simulation to treatment. The average differences between EMT centroid and tumor registration among all CBCTs were 0.13±0.13 cm, 0.14±0.13 cm and 0.12±0.12 cm in SI, AP and lateral directions, respectively. Ninety-five percent of CBCTs resulted in a 0.5 cm change between EMT centroid and tumor registration, indicating that EMT positions correspond well with tumor position during treatments. Six out of the seven recorded CF patients had average differences in inter-EMT displacements ≤0.26 cm and average GR ≤0.22 cm, indicating that the EMTs are stable throughout treatment.Bronchoscopically implanted anchored EMTs are good surrogates for tumor position and are reliable for maintaining tumor position when tracked during DIBH treatment, as long as the tumor size and shape are stable. Large differences in registration between EMTs and spine for many treatments suggest that lung inflation achieved at simulation is often not reproduced.

Background and purpose Radiation dose to the cardio-pulmonary system is critical for radiotherapy-induced mortality in non-small cell lung cancer. Our goal was to automatically segment substructures of the cardio-pulmonary system for use in outcomes analyses for thoracic cancers. We built and validated a multi-label Deep Learning Segmentation (DLS) model for accurate auto-segmentation of twelve cardio-pulmonary substructures. Materials and methods The DLS model utilized a convolutional neural network for segmenting substructures from 217 thoracic radiotherapy Computed Tomography (CT) scans. The model was built in the presence of variable image characteristics such as the absence/presence of contrast. We quantitatively evaluated the final model against expert contours for a hold-out dataset of 24 CT scans using Dice Similarity Coefficient (DSC), 95th Percentile of Hausdorff Distance and Dose-volume Histograms (DVH). DLS contours of an additional 25 scans were qualitatively evaluated by a radiation oncologist to determine their clinical acceptability. Results The DLS model reduced segmentation time per patient from about one hour to 10 s. Quantitatively, the highest accuracy was observed for the Heart (median DSC = (0.96 (0.95–0.97)). The median DSC for the remaining structures was between 0.81 and 0.93. No statistically significant difference was found between DVH metrics of the auto-generated and manual contours (p-value ⩾ 0.69). The expert judged that, on average, 85% of contours were qualitatively equivalent to state-of-the-art manual contouring. Conclusion The cardio-pulmonary DLS model performed well both quantitatively and qualitatively for all structures. This model has been incorporated into an open-source tool for the community to use for treatment planning and clinical outcomes analysis.

BACKGROUND AND PURPOSE: We test the hypothesis that unsatisfactory outcomes after concurrent chemoradiotherapy (RT) for locally advanced non-small cell lung cancer (LA-NSCLC) are due to treatment-related immunosuppression. MATERIALS AND METHODS: White blood cells (WBCs) data were retrospectively collected for all stage IIIA/B LA-NSCLC patients before and after (after RT: two weeks, two months, four months) concurrent chemotherapy and intensity-modulated RT in which patients were treated to a median of 63Gy (1.8–2.0 Gy/fractions) in 2004–2014 (N=155). Nine WBC variables were generated from pre-RT normalized absolute number of lymphocytes and neutrophils (L, N) and the N/L thereof. A WBC variable was considered a predictor for overall survival and recurrence (distant/local/nodal/regional) if p≤0.006 (corrected for 9 variables) from Cox regression and competing risk analyses, respectively; both conducted using bootstrap resampling. Finally, a WBC variable predicting any of the outcomes was linearly associated with each of eleven disease/patient/treatment characteristics (p≤0.005; corrected for 11 characteristics). RESULTS: At the three post-RT time points both L and N significantly decreased (p

Thirty percent of patients with head and neck squamous cell carcinoma (HNSCC) are at least 70 years of age. This number continues to rise as life expectancy continues to increase. Still, older adults with HNSCC remain underrepresented in clinical trials, resulting in ambiguity on optimal management. Older adults are a complex patient population, often requiring increased support due to issues relating to functional and performance status, medical comorbidities, and medication management. Furthermore, in older adults with HNSCC, many of these conditions are independently associated with increased toxicity and worse outcomes. Toxicity in the older adult remains difficult to predict and to understand, and as treatment decisions are based on treatment tolerability, it is essential to understand the toxicities and how to minimize them. Novel predictive scores are being developed specifically for older adults with HNSCC to understand toxicity and to assist in personalized treatment decisions. There are clinical trials presently underway that are investigating shortened radiation courses and novel, less toxic systemic treatments in this population. In the forthcoming sections, we provide a detailed overview of the clinical data, treatment paradigms, and considerations in this population. This review provides a comprehensive overview of existing clinical data and clinical considerations in the older adult head and neck cancer population. Additionally, we provide a detailed overview of pertinent current and ongoing clinical trials, as well as future areas for investigation.

Purpose To describe a nonlinear finite element analysis method by using magnetic resonance (MR) images for the assessment of the mechanical competence of the hip and to demonstrate the reproducibility of the tool. Materials and Methods This prospective study received institutional review board approval and fully complied with HIPAA regulations for patient data. Written informed consent was obtained from all subjects. A nonlinear finite element analysis method was developed to estimate mechanical parameters that relate to hip fracture resistance by using MR images. Twenty-three women (mean age ± standard deviation, 61.7 years ± 13.8) were recruited from a single osteoporosis center. To thoroughly assess the reproducibility of the finite element method, three separate analyses were performed: a test-retest reproducibility analysis, where each of the first 13 subjects underwent MR imaging on three separate occasions to determine longitudinal variability, and an intra- and interoperator reproducibility analysis, where a single examination was performed in each of the next 10 subjects and four operators independently performed the analysis two times in each of the subjects. Reproducibility of parameters that reflect fracture resistance was assessed by using the intraclass correlation coefficient and the coefficient of variation. Results For test-retest reproducibility analysis and inter- and intraoperator analyses for proximal femur stiffness, yield strain, yield load, ultimate strain, ultimate load, resilience, and toughness in both stance and sideways-fall loading configurations each had an individual median coefficient of variation of less than 10%. Additionally, all measures had an intraclass correlation coefficient higher than 0.99. Conclusion This experiment demonstrates that the finite element analysis model can consistently and reliably provide fracture risk information on correctly segmented bone images.

BACKGROUND: Osteoporotic hip fractures heavily cost the health care system. Clinicians and patients can benefit from improved tools to assess bone health. Herein, we aim to develop a three-dimensional magnetic resonance imaging (MRI) method to assess cortical bone thickness and assess the ability of the method to detect regional changes in the proximal femur. METHODS: Eighty-nine patients underwent hip magnetic resonance imaging. FireVoxel and 3DSlicer were used to generate three-dimensional proximal femur models. ParaView was used to define five regions: head, neck, greater trochanter, intertrochanteric region, and subtrochanteric region. Custom software was used to calculate the cortical bone thickness and generate a color map of the proximal femur. Mean cortical thickness values for each region were calculated. Statistical t-tests were performed to evaluate differences in cortical thickness based on proximal femur region. Measurement reliability was evaluated using coefficient of variation, intraclass correlation coefficients, and overlap metrics. RESULTS: Three-dimensional regional cortical thickness maps for all subjects were generated. The subtrochanteric region was found to have the thickest cortical bone and the femoral head had the thinnest cortical bone. There were statistically significant differences between regions (p < 0.01) for all possible comparisons. CONCLUSIONS: Cortical bone is an important contributor to bone strength, and its thinning results in increased hip fracture risk. We describe the development and measurement reproducibility of an MRI tool permitting assessment of proximal femur cortical thickness. This study represents an important step toward longitudinal clinical trials interested in monitoring the effectiveness of drug therapy on proximal femur cortical thickness.

Purpose To evaluate the within-day and between-day measurement reproducibility of in vivo 3D MRI assessment of trabecular bone microarchitecture of the proximal femur. Materials and Methods This Health Insurance Portability and Accountability Act (HIPPA)-compliant, Institutional Review Board (IRB)-approved study was conducted on 11 healthy subjects (mean age = 57.4 ± 14.1 years) with written informed consent. All subjects underwent a 3T MRI hip scan in vivo (0.234 × 0.234 × 1.5 mm) at three timepoints: baseline, second scan same day (intrascan), and third scan 1 week later (interscan). We applied digital topological analysis and volumetric topological analysis to compute the following microarchitectural parameters within the femoral neck: total bone volume, bone volume fraction, markers of trabecular number (skeleton density), connectivity (junctions), plate-like structure (surfaces), plate width, and trabecular thickness. Reproducibility was assessed using root-mean-square coefficient of variation (RMS-CV) and intraclass correlation coefficient (ICC). Results The within-day RMS-CVs ranged from 2.3% to 7.8%, and the between-day RMS-CVs ranged from 4.0% to 7.3% across all parameters. The within-day ICCs ranged from 0.931 to 0.989, and the between-day ICCs ranged from 0.934 to 0.971 across all parameters. Conclusion These results demonstrate high reproducibility for trabecular bone microarchitecture measures derived from 3T MR images of the proximal femur. The measurement reproducibility is within a range suitable for clinical cross-sectional and longitudinal studies in osteoporosis. J. Magn. Reson. Imaging 2015;42:1339–1345.

To evaluate the precision of measures of bone volume and bone volume fraction derived from high-resolution 3T MRI of proximal femur bone microarchitecture using non-uniformity correction. This HIPAA compliant, institutional review board approved study was conducted on six volunteers (mean age $$56\pm 13$$ years), and written informed consent was obtained. All volunteers underwent a 3T FLASH MRI hip scan at three time points: baseline, second scan same day (intra-scans), and third scan one week later (inter-scans). Segmentation of femur images and values for total proximal femur volume ( $$T$$ ), bone volume ( $$B$$ ), and bone volume fraction (BVF) were calculated using in-house developed software, FireVoxel. Two types of non-uniformity corrections were applied to images (N3 and BiCal). Precision values were calculated using absolute percent error (APE). Statistical analysis was carried out using one-sample one-sided t test to observe the consistency of the precision and paired t test to compare between the various methods and scans. No significant differences in bone volume measurements were observed for intra- and inter-scans. When using non-uniformity correction and assessing all subjects uniformly at the level of the lesser trochanter, precision values overall improved, especially significantly ( $$p< 0.05$$ ) when measuring bone volume, $$B$$ . $$B$$ values using the combination of N3 or BiCal with CLT had a significant consistent APE values of less than 2.5 %, while BVF values were all consistently and significantly lower than 2.5 % APE. Our results demonstrate the precision of high-resolution 3D MRI measures were comparable to that of dual-energy X-ray absorptiometry. Additional corrections to the analysis technique by cropping at the lesser trochanter or using non-uniformity corrections helped to improve precision. The high precision values from these MRI scans provide evidence for MRI of the proximal femur as a promising tool for osteoporosis diagnosis and treatment.

The infraction victims suffer certain consequences that can be of material, physical-biological, social and moral (psychological) nature. Through committing certain infractions, the victims are caused the loss of some organs or senses or the ceasing of their functioning, physical or psychical infirmities or other such consequences. A very important place in the field of the consequences caused by infractions is occupied by the prejudices of moral nature.

To evaluate the within-day and between-day measurement reproducibility of in vivo 3D MRI assessment of trabecular bone microarchitecture of the proximal femur.This Health Insurance Portability and Accountability Act (HIPPA)-compliant, Institutional Review Board (IRB)-approved study was conducted on 11 healthy subjects (mean age = 57.4 ± 14.1 years) with written informed consent. All subjects underwent a 3T MRI hip scan in vivo (0.234 × 0.234 × 1.5 mm) at three timepoints: baseline, second scan same day (intrascan), and third scan 1 week later (interscan). We applied digital topological analysis and volumetric topological analysis to compute the following microarchitectural parameters within the femoral neck: total bone volume, bone volume fraction, markers of trabecular number (skeleton density), connectivity (junctions), plate-like structure (surfaces), plate width, and trabecular thickness. Reproducibility was assessed using root-mean-square coefficient of variation (RMS-CV) and intraclass correlation coefficient (ICC).The within-day RMS-CVs ranged from 2.3% to 7.8%, and the between-day RMS-CVs ranged from 4.0% to 7.3% across all parameters. The within-day ICCs ranged from 0.931 to 0.989, and the between-day ICCs ranged from 0.934 to 0.971 across all parameters.These results demonstrate high reproducibility for trabecular bone microarchitecture measures derived from 3T MR images of the proximal femur. The measurement reproducibility is within a range suitable for clinical cross-sectional and longitudinal studies in osteoporosis.

Osteoporosis is a disease of weak bone. Our goal was to determine the measurement reproducibility of magnetic resonance assessment of proximal femur strength.This study had institutional review board approval, and written informed consent was obtained from all subjects. We obtained images of proximal femur microarchitecture by scanning 12 subjects three times within 1 week at 3T using a high-resolution 3-D FLASH sequence. We applied finite element analysis to compute proximal femur stiffness and femoral neck elastic modulus.Within-day and between-day root-mean-square coefficients of variation and intraclass correlation coefficients ranged from 3.5 to 6.6 % and 0.96 to 0.98, respectively.The measurement reproducibility of magnetic resonance assessment of proximal femur strength is suitable for clinical studies of disease progression or treatment response related to osteoporosis bone-strengthening interventions.