Search

Reinforced concrete structures play a pivotal role in island and reef engineering projects. Given the resource constraints typical of island regions, substituting traditional manufactured sand aggregate with reef limestone not only reduces reliance on river sand but also addresses the issue of disposing of waste reef limestone slag generated during excavation. However, the performance characteristics of reef limestone concrete, particularly its bond strength with reinforcing steel, warrant further investigation. This is particularly true for the bond–slip behavior of the reinforcement. This study aims to elucidate the effects of various parameters on the bond performance between steel and reef limestone concrete through central pullout tests. These parameters include the type and diameter of the reinforcement, bond length, and loading rate. The investigation encompasses the analysis of load–slip curves, bond failure modes, and variations in bond stress. Additionally, using the Abaqus software, a numerical simulation was conducted to analyze the mesoscopic stress characteristics, thereby revealing the mechanisms of bond formation and failure modes between steel reinforcement and reef limestone concrete. The results indicate that the bond–slip curve for reef limestone concrete reinforced with ribbed rebars and Glass Fiber-Reinforced Polymer (GFRP) rebars can be broadly categorized into four phases: minor slip, slip, decline, and residual, with the residual phase exhibiting a wave-like pattern. The predominant failure modes in reef limestone concrete are either pulling out or splitting. The bond stress in reef limestone concrete decreases with an increase in rebar diameter and bond length; conversely, it increases with the loading rate, although the ultimate slip decreases. The mesoscopic failure characteristics of reinforced reef limestone concrete, as simulated in Abaqus, are consistent with the experimental outcomes. [ABSTRACT FROM AUTHOR]

Nuclear power is a high-quality clean energy source, but nuclear waste is generated during operation. The waste continuously releases heat during disposal, increasing the adjoining rock temperature and affecting the safety of the disposal site. Basalt is widely considered a commonly used rock type in the repository. This study of basalt's mechanical characteristics and damage evolution after thermal damage, with its far-reaching engineering value, was conducted by combining experimental work and theory. Uniaxial compression tests were conducted on basalt exposed to 25 °C, 500 °C, 700 °C, 900 °C, and 1100 °C conditions, and acoustic emission (AE) equipment was utilized to observe the acoustic emission phenomenon during deformation. This study was carried out to examine the mechanical characteristics, the sound emission features, the progression of damage laws, and the stress–strain framework of basalt after exposure to different types of thermal harm. As the temperature rises, the rock's maximum strength declines steadily, the peak strain rises in tandem, the rock sample's ductility is augmented, the failure mode changes from shear to tensile failure, and cracks in the failure area are observed. At room temperature, the acoustic emission signal is more vigorous than in the initial stage of rock sample loading due to thermal damage; however, after the linear elastic stage is entered, its activity is lessened. In cases where the rock approaches collapse, there is a significant surge in acoustic emission activity, leading to the peak frequency of acoustic emission ringing. The cumulative ring count of acoustic emission serves as the basis for the definition of the damage variable. At room temperature, the damage evolution of rock samples can be broken down into four distinct stages. This defined damage variable is more reflective of the entire failure process. After exposure to high temperatures, the initial damage of the rock sample becomes more extensive, and the damage variable tends to be stable with strain evolution. The stress–strain constitutive model of basalt deformation is derived based on the crack axial strain law and acoustic emission parameters. A powerful relationship between theoretical and experimental curves is evident. [ABSTRACT FROM AUTHOR]

Sulfide minerals (mainly FeS2) contained in lead-zinc tailings are easy to be acidified in the air. The acidification mechanism is that the tailing sand generates sulfuric acid and sulfate under the catalysis of oxidant, water and oxygen. The acidic liquid generated by the reaction will continue to react with metal oxides to form an insoluble precipitate.In order to reveal the corresponding changes of chemical properties and physical properties of lead-zinc tailing sand during acidification, a series of reaction processes of tailings under natural conditions were simulated by immersion test in laboratory.It is found through the test that with the deepening of acidification, the coarse particles of tailing sand dissolve, resulting in the decrease of iron concentration in the compound, the increase of fine particles, the increase of specific surface area, the decrease of surface friction and occlusion friction between particles, resulting in the decrease of internal friction angle, and the decrease of the safety of tailings dam. words.