Search

TiN-Si3N4 composite powders were prepared by carbothermal reduction nitridation using rutile and quartz as raw materials. The influence of temperature and carbon addition on the phase evolution and microstructure of the products were investigated. The equilibrium phase diagram of Si-C-N-O and Ti-C-N-O system at different temperatures under 0.2 MPa nitrogen pressure was drew. The results show that the optimum parameters for synthesizing TiN-Si3N4 by carbothermal reduction nitridation process are carbon addition of stoichiometric content, temperature of 1873 K for 4 h and nitrogen pressure of 0.2 MPa. The produced TiN-Si3N4 in this experiment exist in granular and hexagonal columnar shape, and the average particle size of the synthesized powders is 2 ~ 10 μm.

A series of new apatite phosphors Ca5.95−xSrxLa4(SiO4)2(PO4)4O2:0.05Eu2+ (x = 0‐5.95) were prepared with the solid‐state method. The variations of the occupation rate and cell parameters were investigated in detail, demonstrating that the phosphors are pure phases and that the different occupation rates of La3+, Ca2+, and Sr2+ ions are due to the different electrostatic bond strengths. The reflectance and photoluminescence excitation spectra prove that the phosphors can be efficiently excited with near‐ultraviolet (n‐UV) light. The broad redshift (50 nm) in the photoluminescence spectra is attributed to the increase in the crystal field splitting when the Ca2+ ion is replaced by the larger Sr2+ ion. At 150°C, the obtained phosphors maintain an emission intensity of ~67%‐77% of that at room temperature (25°C), which indicates relatively the high performance of apatite phosphors in the temperature‐dependence experiment. Because of the substitution of the small Ca2+ ion by the large Sr2+ ion, the emission color changes from green to yellow. Finally, a series of self‐made light emitting diodes lamps were fabricated by coating the Ca5.95−xSrxLa4(SiO4)2(PO4)4O2:0.05Eu2+ phosphors with commercial blue and red phosphors on an n‐UV chip (λex = 370 nm). The self‐made white‐emitting lamps display a continuous changing correlated color temperature (4053‐9353 K) or commission international de L'eclairgae (from [0.29, 0.28] to [0.38, 0.37]), implying that the series apatite phosphors have great potential to meet the different requirements of applications. [ABSTRACT FROM AUTHOR]

The ZrN‐SiAlON composite powder was synthesized using low‐grade zircon and bauxite by carbothermal reduction nitridation at first and then ZrN‐SiAlON‐SiC‐C composite refractory were fabricated with the ZrN‐SiAlON powder, SiC particles, and a small amount of Si powder as raw materials and sucrose as the binder. The slag resistance of these composites in O2, N2 and Ar atmosphere was investigated by X‐ray diffraction, scanning electron microscopy, and energy dispersion spectra. The results show that the pores in the inside of ZrN‐SiAlON‐SiC‐C composite refractory were enlarged in oxygen atmosphere due to oxidation, which leads to the decrease in slag resistance. In argon atmosphere, blast furnace slag destroyed the sintered body of zircon, corundum, and cristobalite with the formation of CaZrO3, then infiltrated into and filled the pores inside the refractory to form a dense layer, which hindered the further erosion of the blast furnace slag. In the reducing atmosphere, the interfacial energy of the gas‐liquid phases became larger due to the reactions between blast furnace slag liquid and the gas, resulting in a larger wetting angle which prevented the erosion. [ABSTRACT FROM AUTHOR]

A series of novel green emission Whitlockite-type Ca8ZnLa(PO4)7:Eu2+ and color tunable Ca8ZnLa(PO4)7:Eu2+,Mn2+ phosphors were prepared by the solid-state reaction method in a reducing atmosphere. Its crystal structure and phase composition were identified by high-resolution transmission electron microscopy, selected area electronic diffraction, X-ray photoelectron spectroscopy, and X-ray powder diffraction Rietveld refinement, and it was found to be trigonal, belonging to R-3 c(161) space group. The luminescence properties of Eu2+ singly doped and Eu2+/Mn2+ codoped Ca8ZnLa(PO4)7 phosphors were revealed in detail. Ca8ZnLa(PO4)7:Eu2+ is excitable over a broad range from 200 to 450 nm with a prominent green emitting. With varied Eu2+/Mn2+ ratios, fine-tune emission under 365 nm excitation can be achieved from green (0.221, 0.468) to magenta (0.391, 0.276), especially the warm white light (0.392, 0.352), and CCT 3500 K can be obtained by the process of energy transfer between Eu2+ and Mn2+. The ET mechanism in this system is managed via the dipole-dipole interaction with the maximum energy-transfer efficiency 82.8% based on the decay lifetime data. These results suggest that as-prepared phosphors can serve as promising candidates of UV-pumped w- LEDs. [ABSTRACT FROM AUTHOR]

A series of novel green emission Whitlockite-type Ca8ZnLa(PO4)7:Eu2+ and color tunable Ca8ZnLa(PO4)7:Eu2+,Mn2+ phosphors were prepared by the solid-state reaction method in a reducing atmosphere. Its crystal structure and phase composition were identified by high-resolution transmission electron microscopy, selected area electronic diffraction, X-ray photoelectron spectroscopy, and X-ray powder diffraction Rietveld refinement, and it was found to be trigonal, belonging to R-3 c(161) space group. The luminescence properties of Eu2+ singly doped and Eu2+/Mn2+ codoped Ca8ZnLa(PO4)7 phosphors were revealed in detail. Ca8ZnLa(PO4)7:Eu2+ is excitable over a broad range from 200 to 450 nm with a prominent green emitting. With varied Eu2+/Mn2+ ratios, fine-tune emission under 365 nm excitation can be achieved from green (0.221, 0.468) to magenta (0.391, 0.276), especially the warm white light (0.392, 0.352), and CCT 3500 K can be obtained by the process of energy transfer between Eu2+ and Mn2+. The ET mechanism in this system is managed via the dipole-dipole interaction with the maximum energy-transfer efficiency 82.8% based on the decay lifetime data. These results suggest that as-prepared phosphors can serve as promising candidates of UV-pumped w- LEDs. [ABSTRACT FROM AUTHOR]

NaSr2Nb5O15 piezoelectric ceramics were sintered at different temperatures with or without atmospheric powder. The effects of atmospheric powder and sintering temperature on the dielectric, piezoelectric, and ferroelectric properties of the ceramics were analyzed. According to the modified Curie-Weiss law, we know that all these ceramics show an intermediate relaxor-like behavior between the normal and ideal relaxor ferroelectrics. Atmospheric powder affects significantly the properties of ceramics because the ceramics sintered without atmospheric powder lose lots of sodium. Furthermore, sintering temperature also significantly affects the properties of ceramics because the relative density of ceramics is enhanced when sintering temperature is increased. [ABSTRACT FROM AUTHOR]

Ultra-long, single crystal, α-Si3N4 nanowires sheathed with amorphous silicon oxide were synthesised by an improved, simplified solid-liquid-solid (SLS) method at 1150 °C without using flowing gases (N2, CH4, Ar, NH3, etc.). Phases, chemical composition, and structural characterisation using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM/HRTEM), Fourier-transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) showed that the nanowires had Si3N4@SiOx core-shell structures. The growth of the nanowires was governed by the solid-liquid-solid (SLS) mechanism. The room temperature photoluminescence (PL) and cathodoluminescence (CL) spectra showed that the optical properties of the α-Si3N4 nanowires can be changed along with the excitation wavelength or the excitation light source. This work can be useful, not only for simplifying the design and synthesis of Si-related nanostructures, but also for developing new generation nanodevices with changeable photoelectronic properties. [ABSTRACT FROM AUTHOR]

The large-scale synthesis of Si3N4 nanobelts from quartz and graphite on a graphite-felt substrate was successfully achieved by catalyst-assisted carbothermal reduction-nitridation. The phase composition, morphology, and microstructure of Si3N4 nanobelts were investigated by X-ray diffraction, Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, energy-dispersive spectroscopy, transmission electron microscopy, and high-resolution transmission electron microscopy. The Si3N4 nanobelts were ~4-5 mm long and ~60 nm thick and exhibited smooth surfaces and flexible shapes. The Si3N4 nanobelts were well crystallized and grow along the [101] direction. The growth is dominated by the combined mechanisms of vapor-liquid-solid base growth and vapor-solid tip growth. The Fe(NO3)3 played a crucial role in promoting the nanobelt formation in the initial stage. The room-temperature photoluminescence spectrum of Si3N4 nanobelts consists of three emission peaks centered at 413, 437, and 462 nm, indicating potential applications in optoelectronic nanodevices. [ABSTRACT FROM AUTHOR]

Discovery of novel phosphors is one of the main issues for improving the color rendering index (CRI) and correlated color temperature (CCT) of white light-emitting diodes (w-LEDs). This study mainly presents a systematic research on the synthesis, crystal structure variation and photoluminescence tuning of novel (oxy)nitride solid solution Ca 3 Si 3-x O 3+x N 4-2x : Eu 2+ phosphors. XRD refinements show that lattice distortion occurs when x value diverges the optimum one (x = 1). The lattice distortion causes a widening of emission spectrum and an increase of Stokes shift (ΔSS), which leads to a bigger thermal quenching. With decrease of x value, the emission spectrum shows an obvious red-shift from 505.2 to 540.8 nm, which is attributed to the crystal field splitting. The enhanced crystal field splitting also broadens the excitation spectrum, making it possible to serve as the phosphor for near ultraviolet (n-UV) LEDs. A 3-phosphor-conversion w-LED lamp was fabricated with the as-prepared phosphor, which exhibits high CRI (Ra = 85.29) and suitable CCT (4903.35 K). All these results indicate that the Ca 3 Si 3-x O 3+x N 4-2x : Eu 2+ phosphor can serve as the green phosphor for n-UV w-LEDs, with a tunable spectrum by controlling the crystal structure and morphology.