Search

Low carbon and high performance have become key trends in the development of construction materials. Understanding the mechanism by which curing conditions affect the mechanical properties of high-ductility geopolymer concrete (HDGC) is of significant importance. This study investigated three sealing curing temperatures (room temperature, 45 °C, and 60 °C) and four curing durations (1 day, 3 days, 5 days, and 7 days), while considering two final curing ages (7 days and 28 days) to explore their effects on the axial tensile and compressive properties of HDGC. The results showed that both 45 °C and 60 °C could improve the brittle failure of HDGC under axial compressive loading. However, curing at 60 °C and for durations longer than 1 day in an oven would catalyze the formation of eight-faced zeolite crystals within the slag–fly ash geopolymer matrix, and it could weaken the matrix's pore structure and subsequently affect the material's later strength development. Nevertheless, oven heat curing enhanced the bridging effect between the fibers and the matrix, partially compensating for the reduction in the initial tensile strength of HDGC. This follows the pseudo-strain-hardening material's saturation cracking criterion to enhance the strain-hardening behavior of HDGC and improve its tensile energy absorption capacity. A curing condition of 45 °C for 5 days is recommended to maximize the ductility of HDGC. This study provides important theoretical support for the design and promotion of green, low-carbon, high-ductility composite materials. [ABSTRACT FROM AUTHOR]

The commercialization of electrolytic MnO2–Zn batteries is highly applauded owing to the advantages of cost‐effectiveness, high safety, high energy density, and durable working performance. However, due to the low reversibility of the cathode MnO2/Mn2+ chemistry at high areal capacities and the severe Zn anode corrosion, the practical application of MnO2–Zn batteries is hampered by inadequate lifespan. Leveraging the full advantage of an iodine redox mediator, here we design a highly rechargeable electrolytic MnO2–Zn battery with a high areal capacity. The MnO2–Zn battery coupled with an iodine mediator in a mild electrolyte shows a high discharge voltage of 1.85 V and a robust areal capacity of 10 mAh cm−2 under a substantial discharge current density of 160 mA cm−2. The MnO2/I2–Zn battery with an areal capacity of 10 mAh cm−2 exhibits prolonged stability of over 950 cycles under a high‐capacity retention of ~94%. The scaled‐up MnO2/I2–Zn battery reveals a stable cycle life under a cell capacity of ~600 mAh. Moreover, our constructed MnO2/I2–Zn battery demonstrates a practical energy density of ~37 Wh kg−1 and a competitive energy cost of <18 US$ kWh−1 by taking into account the cathode, anode, and electrolyte. The MnO2/I2–Zn battery, with its remarkable reversibility and reasonable energy density, enlightens a new arena of large‐scale energy storage devices. [ABSTRACT FROM AUTHOR]