Search

The design of new generation fast nuclear reactors requires highly accurate cross-section measurements in the MeV energy region. The 242Pu fission cross section is of particular interest for Pu incineration and nuclear waste production. There are discrepancies around 1 MeV incident neutron energy between libraries and among experimental data. Some data suggest the presence of a strong structure between 1 and 1.2 MeV whereas it is barely visible on some other data and its shape is very different among evaluations. The large majority of the 242Pu(n,f) measurements have been carried out with respect to the 235U(n,f) secondary-standard cross section. This introduces a strong correlation between measurements from different research teams. Moreover, this reference cross section exhibits structures, in particular a steep increase of +10% at 1 MeV. Therefore, we aim to re-measure the 242Pu(n,f) cross section relative to the primary-standard 1H(n,n)p cross section, by using a proton recoil detector. This standard has a very high accuracy (0.4%), is not used for other 242Pu measurements, and is structureless. An experiment has been carried out in October 2022 at the MONNET facility in JRC Geel, with incident neutron energies from 0.9 MeV to 2.0 MeV. The experimental setup will be presented, and the analysis procedure will be detailed.

In this paper, we provide templates of measurement uncertainty sources expected to appear for average prompt- and total-fission neutron multiplicities, ν ¯ p $ \overline\nu_p $ and ν ¯ t $ \overline\nu_t $ , for the following measurement types: absolute manganese-bath experiments for ν ¯ t $ \overline\nu_t $ , absolute and ratio liquid-scintillator measurements for ν ¯ p $ \overline\nu_p $ . These templates also suggest a typical range of these uncertainties and their correlations based on a survey of available experimental data, associated literature, and feedback from experimentalists. In addition, the information needed to faithfully include the associated experimental data into the nuclear-data evaluation process is provided.

In this paper, we provide templates of uncertainty sources expected to appear for three measurement types of prompt fission neutron spectra (PFNS): (1) shape measurements, (2) clean-ratio shape, that is the monitor PFNS are measured in nearly exactly the same surrounding as the PFNS of interest, and (3) indirect ratios, where the detector efficiency is backed out from PFNS monitor measurements. Information is also listed that is needed to faithfully include PFNS in nuclear data evaluations to guide experimenters on how to best report data and metadata for their measurements. These templates also suggest a typical range of pertinent uncertainty values and their correlations in case realistic uncertainties cannot be estimated from information on the measurement itself. The templates were based on a literature review, information found in EXFOR for 252Cf, 235, 238U, and 239Pu PFNS, and enhanced by expertise from experimenters contributing to these PFNS templates.

Since its introduction in the seventies’, the so-called surrogate-reaction method (SRM) has motivated the development and improvement of theories in connection to direct reactions. A recent work by Bouland and Noguère, Phys. Rev. C 102, 054608 (2020), has shown that the inclusion of experimental probabilities in the neutron cross section evaluation process can be better achieved using tools resulting from the efforts made over the two last decades. In particular, the authors have put forward a new prescription, named after the SRM as extended SRM (ESRM), to convert, with reasonable confidence, probabilities measured in direct reactions to pseudo-experimental neutron-induced reaction cross sections. Applied to the 174Yb(3He,py)176Lu* transfer reaction, the ESRM has demonstrated much more precision than the early use of the SRM. In addition to the ‘direct’ analysis of reaction probabilities measured in direct reactions using the right modeling as developed in Phys. Rev. C 100, 064611 (2019), it is worth to try converting the measured probabilities in pseudo experimental neutron-induced cross sections for neutron reactor data applications. In the present paper, first results, before conversion, are shown by applying the two ESRM equations to a fissile isotope.

A new 238U(n,f) prompt fission neutron spectra (PFNS) measurement has been recently performed at the WNR facility of the Los Alamos National Laboratory. The measurement allows one to explore the dependence of the prompt fission neutron energy spectra on the incident neutron energy. The experimental setup couples the Chi-Nu scintillator array to a newly developed fission chamber, characterized by an improved alphafission discrimination and time resolution, a reduced amount of matter in the neutron beam and a higher actinide mass. The dedicated setup and the high statistics collected allow us to obtain a good precision on the measured fission neutron energy, as well as to explore the low energy region, down to 650keV, and the high energy region, above 5 MeV, of the emitted neutron spectrum. These are indeed the regions where discrepancies in the evaluated PFNS data are found. We present here the first preliminary results of the experiment.

Fission Chambers (FC) are often used to determine fission cross sections and to measure the neutron beam flux via standard neutron-induced fission reactions. Thus, the fission detection efficiency is a key parameter. Several methods exist to determine this efficiency, with a final accuracy not better than 1%. The detection of prompt fission neutrons allows events related to the fission process to be tagged, and enables the efficiency to be inferred with accuracy of the order of few 0.1%. This method is very robust since it is independent in first order to several factors like geometry, used materials or neutron contour selection. To obtain high accuracy, few corrections have still to be taken into account. In particular, the neutron detectors have to cover several detection angles. In addition, the background contribution of neutrons from cosmic rays or from an accelerator has to be removed. Several experiments based on the use of a 252Cf source are presented to describe all these points.

A new prompt fission neutron spectra (PFNS) measurement in the 238U(n,f) reaction was performed at LANSCE/WNR facility. Evaluated data show discrepancies on the low (below 1 MeV) and high (above 5 MeV) energy parts in the PFNS for different major and minor actinides. The goal is to improve these measurements in a wide range of incident energy. The energy of the incoming neutron, inducing the fission, and the prompt neutron energies, are measured by time-of-flight method. A dedicated fission chamber was developed, in order to improve alpha-fission discrimination, timing resolution, actinide mass, and to reduce the amount of neutron scattering. To detect prompt neutrons, the 54 Chi-Nu scintillator cells array were surrounding the fission chamber. High statistics were recorded during this experiment, allowing a precise study of PFNS behavior as a function of incident neutron energy, from 1 MeV to 200 MeV. This experiment also showed that all the new tools developed to improve PFNS measurements are performing. Therefore, measurements of PFNS with others actinides such as 239Pu are planned.

The use of ground-penetrating radar (GPR) techniques at high frequencies for historical building investigations requires an accurate knowledge of the material complex permittivity. A new measurement system is presented, which by exploiting a resonance phenomenon, yields accurate values of permittivity and resistivity also in the case of low-loss materials. These parameters are obtained from an amplitude-only measurement of the transmission response curve of a rectangular waveguide cavity, loaded by the sample under test. The setup requires the availability of brick-shaped samples, which can be obtained easily in the case of rock materials. Permittivities and resistivities were measured in the frequency range 1.1-1.7 GHz on samples of marbles, sandstones, and limestones. The measurement method and the experimental results ate presented and discussed. Index Terms--Complex permittivity measurement, dielectric losses, ground-penetrating radar (GPR), rock materials.