Search

Mammalian Meckel's cartilage is a temporary structure associated with mandible development. Notably, its elimination is not executed by apoptosis, and autophagy was suggested as the major mechanism. Simultaneous reports point to pro-apoptotic caspases as novel participants in autophagic pathways in general. The aim of this research was to find out whether activation of pro-apoptotic caspases (-2, -3, -6, -7, -8 and -9) was associated with autophagy of the Meckel's cartilage chondrocytes. Active caspases were examined in serial histological sections of mouse mandible using immunodetection and were correlated with incidence of autophagy based on Beclin-1 expression. Caspase-2 and caspase-8 were found in Beclin-1 positive regions, whereas caspase-3, -6, -7 and -9 were not present. Caspase-8 was further correlated with Fas/FasL and HIF-1α, potential triggers for its activation. Some Fas and FasL positivity was observed in the chondrocytes but caspase-8 activation was found also in FasL deficient cartilage. HIF-1α was abundantly present in the hypertrophic chondrocytes. Taken together, caspase-8 activation in the Meckel's cartilage was demonstrated for the first time. Caspase-8 and caspase-2 were the only pro-apoptotic caspases detected in the Beclin-1 positive segment of the cartilage. Activation of caspase-8 appears FasL/Fas independent but may be switched on by HIF-1α. [ABSTRACT FROM AUTHOR]

Three-dimensional (3D) cell cultures are to date the gold standard in biomedical research fields due to their enhanced biological functions compared to conventional two-dimensional (2D) cultures. 3D cell spheroids, as well as organoids, are better suited to replicate tissue functions, which enables their use both as in vitro models for basic research and toxicology, as well as building blocks used in tissue/organ biofabrication approaches. Culturing 3D spheroids from bone-derived cells is an emerging technology for both disease modelling and drug screening applications. Bone tissue models are mainly limited by the implementation of sophisticated devices and procedures that can foster a tissue-specific 3D cell microenvironment along with a dynamic cultivation regime. In this study, we consequently developed, optimized and characterized an advanced perfused microfluidic platform to improve the reliability of 3D bone cell cultivation and to enhance aspects of bone tissue maturation in vitro. Moreover, biomechanical stimulation generated by fluid flow inside the arrayed chamber, was used to mimic a more dynamic cell environment emulating a highly vascularized bone we expected to improve the osteogenic 3D microenvironment in the developed multifunctional spheroid-array platform. The optimized 3D cell culture protocols in our murine bone-on-a-chip spheroid model exhibited increased mineralization and viability compared to static conditions. As a proof-of-concept, we successfully confirmed on the beneficial effects of a dynamic culture environment on osteogenesis and used our platform for analysis of bone-derived spheroids produced from primary human pre-osteoblasts. To conclude, the newly developed system represents a powerful tool for studying human bone patho/physiology in vitro under more relevant and dynamic culture conditions converging the advantages of microfluidic platforms with multi-spheroid array technologies., (© 2023. The Author(s).)

The protein heterogeneity at the single-cell level has been recognized to be vital for an understanding of various life processes during animal development. In addition, the knowledge of accurate quantity of relevant proteins at cellular level is essential for appropriate interpretation of diagnostic and therapeutic results. Some low-copy-number proteins are known to play a crucial role during cell proliferation, differentiation, and also in apoptosis. The fate decision is often based on the concentration of these proteins in the individual cells. This is likely to apply also for caspases, cysteine proteases traditionally associated with cell death via apoptosis but recently being discovered also as important factors in cell proliferation and differentiation. The hypothesis was tested in bone-related cells, where modulation of fate from apoptosis to proliferation/differentiation and vice versa is particularly challenging, e.g., towards anti-osteoporotic treatments and anti-cancer strategies. An ultrasensitive and highly selective method based on bioluminescence photon counting was used to quantify activated caspase-3/7 in order to demonstrate protein-level heterogeneity in individual cells within one population and to associate quantitative measurements with different cell fates (proliferation, differentiation, apoptosis). The results indicate a gradual increase of caspase-3/7 activation from the proliferative status to differentiation (more than three times) and towards apoptosis (more than six times). The findings clearly support one of the putative key mechanisms of non-apoptotic functions of pro-apoptotic caspases based on fine-tuning of their activation levels., (© 2021. Springer-Verlag GmbH Germany, part of Springer Nature.)

Fas ligand (FasL) is a member of the tumor necrosis factor (TNF) superfamily involved in the activation of apoptosis. Assuming that apoptosis is initiated after tooth extraction it is reasonable to suggest that FasL may play a pivotal role in the healing of extraction sockets. Herein, we tested the hypothesis of whether the lack of FasL impairs the healing of extraction sockets. To this end, we extracted upper right incisors of FasL knockout (KO) mice and their wildtype (WT) littermates. After a healing period of two weeks, bone volume over total volume (BV/TV) via µCT and descriptive histological analyses were performed. µCT revealed that BV/TV in the coronal region of the socket amounted to 39.4% in WT and 21.8% in KO, with a significant difference between the groups (p=0.002). Likewise, in the middle region of the socket, BV/TV amounted to 50.3% in WT and 40.8% in KO (p<0.001). In the apical part, however, no difference was noticed. Consistently, WT mice displayed a significantly higher median trabecular thickness and a lower trabecular separation when compared to the KO group at the coronal and central region of the socket. There was the overall tendency that in both, female and male mice, FasL affects bone regeneration. Taken together, these findings suggest that FasL deficiency may reduce bone regeneration during the healing process of extraction sockets., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Apaza Alccayhuaman, Heimel, Lee, Tangl, Strauss, Stähli, Matalová and Gruber.)

Caspases are proteases traditionally associated with inflammation and cell death. Recently, they have also been shown to modulate cell proliferation and differentiation. The aim of the current research was to search for osteogenic molecules affected by caspase inhibition and to specify the individual caspases critical for these effects with a focus on proapoptotic caspases: caspase-2, -3, -6, -7, -8 and -9. Along with osteocalcin (Ocn), general caspase inhibition significantly decreased the expression of the Phex gene in differentiated MC3T3-E1 cells. The inhibition of individual caspases indicated that caspase-8 is a major contributor to the modification of Ocn and Phex expression. Caspase-2 and-6 had effects on Ocn and caspase-6 had an effect on Phex. These data confirm and expand the current knowledge about the nonapoptotic roles of caspases and the effect of their pharmacological inhibition on the osteogenic potential of osteoblastic cells.

The mandible is a tooth-bearing structure involving one of the most prominent bones of the facial region. Mesenchymal cell condensation is the first morphological sign of osteogenesis, and several studies have focused on this stage also in the mandible. Little information is available about the early post-condensation period, during which avascular soft condensation turns into vascularized bone, and all three major bone cell types, osteoblasts, osteocytes, and osteoclasts, differentiate. In the mouse first lower molar region, the post-condensation period corresponds to the prenatal days 13-15. If during this critical period, when osteogenesis reaches the point of major bone cell differentiation, vascularization already has to play a critical role, one should be able to show molecular changes which support both types of cellular events. The aim of the present report was to follow in organ context the expression of major osteogenic and angiogenic markers and identify those that are up- or downregulated during this period. To this end, PCR Array was applied covering molecules involved in osteoblastic cell proliferation, commitment or differentiation, extracellular matrix (ECM) deposition, mineralisation, osteocyte maturation, angiogenesis, osteoclastic differentiation, and initial bone remodeling. From 161 analyzed osteogenic and angiogenic factors, the expression of 37 was altered when comparing the condensation stage with the bone stage. The results presented here provide a molecular survey of the early post-condensation stage of mandibular/alveolar bone development which has not yet been investigated in vivo .

Caspases have functions particularly in apoptosis and inflammation. Increasing evidence indicates novel roles of these proteases in cell differentiation, including those involved in osteogenesis. This investigation provides a complex screening of osteogenic markers affected by pan caspase inhibition in micromass cultures derived from mouse forelimbs. PCR Array analysis showed significant alterations in expression of 49 osteogenic genes after 7 days of inhibition. The largest change was a decrease in CD36 expression, which was confirmed at organ level by caspase inhibition in cultured mouse ulnae followed by CD36 immunohistochemical analysis. So far, available data point to osteogenic potential of pro-apoptotic caspases. Therefore, the expression of pro-apoptotic caspases (-3, -6, -7, -8, -9) within the growth plate of mouse forelimbs at the stage where the individual zones are clearly apparent was studied. Caspase-9 was reported in the growth plate for the first time as well as caspase-6 and -7 in the resting zone, caspase-7 in the proliferation, and caspase-6 and -8 in the ossification zone. For all caspases, there was a gradient increase in activation toward the ossification zone. The distribution of staining varied significantly from that of apoptotic cells, and thus, the results further support non-apoptotic participation of caspases in osteogenesis.

Analysing the chemical content of individual cells has already been proven to reveal unique information on various biological processes. Single-cell analysis provides more accurate and reliable results for biology and medicine than analyses of extracts from cell populations, where a natural heterogeneity is averaged. To meet the requirements in the research of important biologically active molecules, such as caspases, we have developed a miniaturized device for simultaneous analyses of individual cells. A stainless steel body with a carousel holder enables high-sensitivity parallel detections in eight microvials. The holder is mounted in front of a photomultiplier tube with cooled photocathode working in photon counting mode. The detection of active caspase-3/7, central effector caspases in apoptosis, in single cells is based on the bioluminescence chemistry commercially available as Caspase-Glo ® 3/7 reagent developed by Promega. Individual cells were captured from a culture medium under microscope and transferred by micromanipulator into detection microvial filled with the reagent. As a result of testing, the limits of detection and quantification were determined to be 0.27/0.86 of active caspase-3/7 content in an average apoptotic cell and 0.46/2.92 for non-apoptotic cells. Application potential of this technology in laboratory diagnostics and related medical research is discussed. Graphical abstract Miniaturized device for simultaneous analyses of individual cells.

Caspases are key enzymes activated during the apoptotic machinery. Apoptosis as a way of programmed cell death becomes deregulated in some pathologies including cancer transformations, neurodegenerative, or autoimmune diseases. Most of the methods available for the detection of apoptosis and caspases provide qualitative information only or quantification data as an average from cell populations or cell lysates. Several reports point to the importance of more accurate single-cell analyses in biomedical studies due to heterogeneity at tissue as well as cell level. To meet these requirements, we developed a miniaturized device enabling detection and quantification of active caspase-3/7 in individual cells at a femtogram level (10(-15) g). The active caspase-3/7 detection protocol is based on the bioluminescence chemistry commercially available as a Caspase-Glo™ 3/7 reagent developed by Promega. As a model, we used human stem cells treated by camptothecin to induce apoptosis. Individual apoptotic cells were captured from a culture medium under a microscope and transferred by a micromanipulation system into a detection capillary containing 2 μl of the reagent. Cells without activation by camptothecin served as negative controls. The detection limit of active caspase-3/7 achieved in the miniaturized system was determined as 0.20 and limit of quantification as 0.65 of the amount found in a single apoptotic human stem cell. Such a sensitive method could have a wide application potential in laboratory medicine and related clinically oriented research.

Tooth absence and defects caused by various reasons are frequent events in humans. They are not life threatening but may bring about social consequences. Recent dentistry provides solutions in the form of prosthetics or dental implants; however, several complications and distinct limitations favour bioengineering of dental and periodontal structures. At least two types of cells (epithelial and mesenchymal) have to be recombined to produce a new functional tooth. Moreover, the tooth must be vascularized, innervated and properly anchored in the bone. To study these issues, different approaches have been established in both basic and applied research. In this review, recent strategies and techniques of tooth engineering are comprehensively summarized and discussed, particularly regarding manipulation using stem cells.

Neural crest cells (NCCs) derive early in vertebrate ontogenesis from neural tube as a population of migratory cells with exquisite differentiation potential. Abnormalities in NCC behaviour are cause of debilitating diseases including cancers and a spectrum of neurocristopathies. Thanks to their multilineage differentiation capacity NCCs offer a cell source for regenerative medicine. Both these aspects make NCC biology an important issue to study, which can currently be addressed using methodologies based on pluripotent stem cells. Here we contributed to understanding the biology of human NCCs by refining the protocol for differentiation/propagation of NCClike cells from human embryonic stem cells and by characterizing the molecular and functional phenotype of such cells. Most importantly, we improved formulation of media for NCC culture, we found that poly-L-ornithine combined with fibronectin provide good support for NCC growth, we unravelled the tendency of cultured NCCs to maintain heterogeneity of CD271 expression, and we showed that NCCs derived here possess the capacity to react to BMP4 signals by dramatically up-regulating MSX1, which is linked to odontogenesis.

The first mouse molar (M1) is the most common model for odontogenesis, with research particularly focused on prenatal development. However, the functional dentition forms postnatally, when the histogenesis and morphogenesis of the tooth is completed, the roots form and the tooth physically anchors into the jaw. In this work, M1 was studied from birth to eruption, assessing morphogenesis, proliferation and apoptosis, and correlating these with remodeling of the surrounding bony tissue. The M1 completed crown formation between postnatal (P) days 0-2, and the development of the tooth root was initiated at P4. From P2 until P12, cell proliferation in the dental epithelium reduced and shifted downward to the apical region of the forming root. In contrast, proliferation was maintained or increased in the mesenchymal cells of the dental follicle. At later stages, before tooth eruption (P20), cell proliferation suddenly ceased. This withdrawal from the cell cycle correlated with tooth mineralization and mesenchymal differentiation. Apoptosis was observed during all stages of M1 postnatal morphogenesis, playing a role in the removal of cells such as osteoblasts in the mandibular region and working together with osteoclasts to remodel the bone around the developing tooth. At more advanced developmental stages, apoptotic cells and bodies accumulated in the cell layers above the tooth cusps, in the path of eruption. Three-dimensional reconstruction of the developing postnatal tooth and bone indicates that the alveolar crypts form by resorption underneath the primordia, whereas the ridges form by active bone growth between the teeth and roots to form a functional complex., (© 2011 The Authors. Journal of Anatomy © 2011 Anatomical Society of Great Britain and Ireland.)