Search

Polymer blends containing up to 70% organosolv lignin content and lyotropic cellulose derivatives have been established as "lignin inks" for direct ink writing of fully biobased 3D parts. However, a fast-crosslinking mechanism is needed to improve throughput and design space. In this paper, UV-photocrosslinkable organosolv lignin/hydroxypropyl cellulose inks are formulated through doping with common photocrosslinkers. The most potent photocrosslinkers for neat hydroxypropyl cellulose, lignin and their blends are determined through a series of DOEs. Hydroxypropyl cellulose is significantly more amenable to photocrosslinking than organosolv lignin. The optimal photocrosslinkable ink formulations are printable and exhibit up to 70% gel content, although thermal post-curing remains essential. Chemical, thermal, and mechanical investigations of the photocrosslinked 3D parts evidence efficient crosslinking of HPC through its hydroxyl groups, while lignin appears internally plasticized and/or degraded during inefficient photocrosslinking. Despite this, photocrosslinkable inks exhibit improved tensile properties, shape flexibility, and fidelity. The heterogeneous crosslinking and residual creep highlight the need to further activate lignin for homogeneous photocrosslinking in order to fully exploit the potential of lignin inks in DIW. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper is an experimental and statistical approach to find out an optimal solution for the high print quality reproducible by flexographic printing on coated and uncoated substrate using Taguchi's Grey Relational Analysis method. The halftone image composed of round and square shaped dots with AM screening and the anilox roller with three different screen rulings are employed at different trial runs of experiment. Total of 12 numbers of experimental runs with different combinations of paper grades, halftone dot shapes and anilox roller rulings are employed in the experiment to investigate its influence on the final print quality. The print quality evaluation is based on the assessment of Optical Ink Density (solid areas), Dot Gain, Hue Error and Print Contrast using Taguchi's Grey Relational Analysis method. Based on the Taguchi's GRA score, the optimal solution for the high print quality is prioritized. This paper aims to distinguish the influence of substrate, halftone dot shape and anilox cell ruling in the final print quality of flexographic process. Also, it demonstrates the scope of applying Taguchi's Grey Relational Analysis in the printing field to find out an optimal solution for the multiple criteria-based decision-making activities. [ABSTRACT FROM AUTHOR]

This research aims to use energy harvested from conductive materials to power microelectronic components. The proposed method involves using vibration-based energy harvesting to increase the natural vibration frequency, reduce the need for battery replacement, and minimise chemical waste. Piezoelectric transduction, known for its high-power density and ease of application, has garnered significant attention. Additionally, graphene, a non-piezoelectric material, exhibits good piezoelectric properties. The research explores a novel method of printing graphene material using 3D printing, specifically Direct Ink Writing (DIW) and fused deposition modelling (FDM). Both simulation and experimental techniques were used to analyse energy harvesting. The experimental technique involved using the cantilever beam-based vibration energy harvesting method. The results showed that the DIW-derived 3D-printed prototype achieved a peak power output of 12.2 µW, surpassing the 6.4 µW output of the FDM-derived 3D-printed prototype. Furthermore, the simulation using COMSOL Multiphysics yielded a harvested output of 0.69 µV. [ABSTRACT FROM AUTHOR]

The peculiarities of the decoration of gravure imprints on cardboard using fluorescent inks are considered. The influence of the number of fluorescent impurities added to gravure printing ink on the optical indicators of printed image quality, particularly optical density, and gloss, is investigated. Increasing the number of fluorescent impurities added to the ink from 10 to 30% helps to increase the gloss on imprints from 2 to 15 units. Conducted thermogravimetric studies show the resistance of fluorescent imprints to the influence of temperatures during drying in the printing process. The topography of the surface of the substrates and its influence on the quality of imprints is studied. Conducted electron microscopic studies of imprints obtained with inks with different amounts of fluorescent impurities show their uniform distribution on the surface of the substrate. Studies of the fluorescence spectra of the ink and the imprints formed by it confirm the phenomenon of an increase in the intensity of the glow of printed images. The studies confirm the well-known influence of substrate roughness on the smoothness of gravure imprints. It is established that the absence of significant macro irregularities on the surface of Koppargloss FBB cardboard is due to the presence of two coating layers. Analysis of the surface profiles of FBB cardboard shows that its roughness parameter (Ra = 0.424 μm) is three times smaller compared to Incada Silk C GC1 cardboard (the roughness parameter Ra = 1.28 μm), with a single-layer coating. Such a pattern is also preserved on the imprints, which is reflected in their quality accordingly. Studies show that for imprints on GC1 cardboard, the average ΔE value is 2.23, for imprints on FBB cardboard, the average ΔE value is 3.71, which is due to the presence of double coating. The factors that can influence the process of fluorescence of printed images are outlined. The technological characteristics of inks for gravure printing on packaging are described. [ABSTRACT FROM AUTHOR]

The droplet formation process in inkjet printing is studied numerically and verified through a simulation model. The droplet formation process decides the printing quality of the coating, and a mathematical model is developed to understand the complete process from droplet formation to detachment. The Navier-Stokes equation is used to mathematically derive the droplet radius (rnumerical). COMSOL multiphysics is used for simulation and the radius (rsimulation) is calculated from the droplet mass. The rnumerical and rsimulation are compared for inks containing nickel, graphene, and nickel-graphene composite ink it is observed that the composite ink radiuses have the lowest difference (rsimulation - rnumerical = 0.085 µm). A droplet is formed at 1.47 mm from the nozzle inlet, for nickel-graphene ink, and after 1.5mm for other pristine inks. The results are verified through Z number, velocity profile, and droplet mass. The droplet formation observed from the velocity profile is earliest at 120 µs. It is seen that a stable droplet is generated at 100µs for nickel-graphene ink and at 200 µs for individual inks. [ABSTRACT FROM AUTHOR]

Flexible thermoelectric materials have drawn significant attention from researchers due to their potential applications in wearable electronics and the Internet of Things. Despite many reports on these materials, it remains a significant challenge to develop cost-effective methods for large-scale, patterned fabrication of materials that exhibit both excellent thermoelectric performance and remarkable flexibility. In this study, we have developed an Ag2Se-based ink with excellent printability that can be used to fabricate flexible thermoelectric films by screen printing and low-temperature sintering. The printed films exhibit a Seebeck coefficient of −161 μV/K and a power factor of 3250.9 μW/m·K2 at 400 K. Moreover, the films demonstrate remarkable flexibility, showing minimal changes in resistance after being bent 5000 times at a radius of 5 mm. Overall, this research offers a new opportunity for the large-scale patterned production of flexible thermoelectric films. [ABSTRACT FROM AUTHOR]

The sustainable use of natural resources is becoming an increasingly important issue today. Stone paper, produced as an alternative to cellulose-based paper from the forest, is rich in minerals and produced without cellulose and water. This study focuses on the behavior of screen-printing ink on two different papers, stone paper and coated sticker paper. Properties such as ink adhesion, rubbing resistance, optical printing ink density, ink consumption, and lightfastness were measured on these surfaces. Solvent- and UV-based inks were used, and printing was carried out on cellulose-based (coated sticker paper) and mineral-based (stone paper) paper layers using three different mesh counts (90, 120, and 140 tpc). The rubbing resistance and lightfastness of the papers were also measured. The present findings revealed that stone paper had the same printability properties as cellulose-based paper. The study concluded that using a 140 tpc mesh with both types of ink results in a high-lightfastness ink layer and lower ink consumption. UV-based inks exhibited high rub resistance across all mesh counts. Additionally, when printing with stone paper, there will be a reduction in ink consumption, thereby achieving cost savings. Based on the present findings, it was concluded that water- and oil-resistant stone paper can be considered an essential alternative in many fields, including the printing industry. [ABSTRACT FROM AUTHOR]

Archival writing material is an important carrier to record and reflect archival content, and its material and durability are closely related to the life of archives. The "Shuyede" press in Shandong Province, which originated in the reign of Kangxi (1662 AD–1722 AD) in the Qing dynasty, printed many important archives and ancient books of the Qing dynasty (1644 AD–1911 AD). In order to explore the material composition of woodblock printing ink from the Shuyede press, modern analytical and detection techniques such as scanning electron microscopy–energy-dispersive spectrometry (SEM-EDS), Fourier-transform infrared spectroscopy (FTIR), gas chromatography–mass spectrometry (GC/MS), and pyrolysis gas chromatography–mass spectrometry (Py-GC/MS) were applied for the analysis and identification of the ink on woodblock plates from the Shuyede press. The results showed that two kinds of printing ink—pine soot ink and oil soot ink—used were in these woodblocks from the Shuyede press in the Qing dynasty in the collection of Shandong Museum, and the binding material in the ink was animal glue, indicating that both pine and oil soot inks were used as printing ink in the Qing dynasty. [ABSTRACT FROM AUTHOR]

The stunning thermoelectric behavior of inorganic/organic hybrids and the lack of information on screen-printed flexible thermoelectric generators based on Cu 3 Se 2 and Polyaniline for low-temperature applications have motivated this work. The synergic influence of various acid dopants, concentration, and annealing temperature of polyaniline on the power density of Cu 3 Se 2 /PANI ink-based flexible thermoelectric generator is explored. The presence of 1.5 wt% of H 2 SO 4 -PANI, annealed at 60 °C, decreased the bandgap and electrical resistance of Cu 3 Se 2 by 11.96 % and 29.4 %, respectively. As a result, an increase of 46.06 % in the Seebeck coefficient and 242 % in the power output is achieved, which is many folds higher than the few reported works using novel materials. In addition, the Cu 3 Se 2 /H 2 SO 4 -PANI ink-based flexible thermoelectric generator with eight legs exhibited a maximum power output, power density, and power factor of 25.69 nW, 23.79 mW/m2, and 0.77 nW/m2K2 at ΔT = 100 °C, respectively under external load. [ABSTRACT FROM AUTHOR]

Thermoresponsive hydrogels were 3D-printed with embedded gold nanorods (GNRs), which enable shape change through photothermal heating. GNRs were functionalized with bovine serum albumin and mixed with a photosensitizer and poly(N-isopropylacrylamide) (PNIPAAm) macromer, forming an ink for 3D printing by direct ink writing. A macromer-based approach was chosen to provide good microstructural homogeneity and optical transparency of the unloaded hydrogel in its swollen state. The ink was printed into an acetylated gelatin hydrogel support matrix to prevent the spreading of the low-viscosity ink and provide mechanical stability during printing and concurrent photocrosslinking. Acetylated gelatin hydrogel was introduced because it allows for melting and removal of the support structure below the transition temperature of the crosslinked PNIPAAm structure. Convective and photothermal heating were compared, which both triggered the phase transition of PNIPAAm and induced reversible shrinkage of the hydrogel–GNR composite for a range of GNR loadings. During reswelling after photothermal heating, some structures formed an internally buckled state, where minor mechanical agitation recovered the unbuckled structure. The BSA-GNRs did not leach out of the structure during multiple cycles of shrinkage and reswelling. This work demonstrates the promise of 3D-printed, photoresponsive structures as hydrogel actuators. [ABSTRACT FROM AUTHOR]

An energy supply crisis is impacting all the branches, including the agriculture and food industry. The wise and responsible utilization of plant raw materials already cultivated is becoming a must in the country's economy. Not only the waste of the resources included but also the environmental challenge are concerns behind the not exploited food production by-streams and leftovers' valorization. Fruits and vegetables' out of the market quality "beauty" standards are still valuable sources of nutritious compounds. The conversion of raw materials into edible products can be provided by many techniques, with three-dimensional printing being the most individualized one. The main objective of this review was to summarize the existing efforts for the valorization of fruits and vegetable residuals into edible 3D inks and then 3D printed products. The clustering analysis was used for the separation of certain research approaches in fruit and vegetable wastes exploitation for 3D printing inks' formulation. As the multilayer deposit technique is strongly dependent on the printing conditions and 3D ink formulation, therefore the tabularized description was included presenting the nozzle diameter, printing speed and other conditions specified. [ABSTRACT FROM AUTHOR]

To achieve consistent color reproduction of printed products and accurate measurement the content of mixed ink has always been an important research topic in the printing industry. This paper proposes a spectral-based method for measuring the content of dual-color mixed printing ink, aiming to solve the difficulty in determining the specific content of the base color in the same ratio of dual-color ink by using spectral analysis. First, a composite filtering method combining median filtering and wavelet transform was compared and selected for spectral preprocessing. Then, three methods, namely the successive projections algorithm (SPA), competitive adaptive reweighted sampling method (CARS), and stable competitive adaptive weighted sampling method (SCARS), were used to extract feature wavelengths from the preprocessed information. Based on partial least squares regression (PLSR), four models, PLSR, SPA–PLSR, CARS–PLSR, and SCARS, were established for predictive analysis. To further test the model, the SCARS–PLSR model was used for predictive analysis of magenta-cyan, yellow-magenta, and yellowcyan binary samples with a mass fraction ratio of 0.5. The results showed that the SCARS–PLSR model has the best predictive performance, with RMSE and R2 values of 0.0052, 0.0002, 0.0004 and 0.9989, 0.9999, 0.9999, respectively. This indicates that this study can accurately determine the content of dual-color ink by spectral analysis. [ABSTRACT FROM AUTHOR]

In recent years, solid dosage forms have gained interest in pediatric therapy because they can provide valuable benefits in terms of dose accuracy and stability. Particularly for orodispersible films (ODFs), the literature evidences increased acceptability and dose flexibility. Among the various available technologies for obtaining ODFs, such as solvent casting, hot-melt extrusion, and ink printing technologies, the solvent-free preparation methods exhibit significant advantages. This study investigated Vacuum Compression Molding (VCM) as a solvent-free manufacturing method for the preparation of flexible-dose pediatric orodispersible films. The experimental approach focused on selecting the appropriate plasticizer and ratios of the active pharmaceutical ingredient, diclofenac sodium, followed by the study of their impacts on the mechanical properties, disintegration time, and drug release profile of the ODFs. Additional investigations were performed to obtain insights regarding the solid-state properties. The ODFs obtained by VCM displayed adequate quality in terms of their critical characteristics. Therefore, this proof-of-concept study shows how VCM could be utilized as a standalone method for the production of small-scale ODFs, enabling the customization of doses to meet the individual needs of pediatric patients. [ABSTRACT FROM AUTHOR]

Flexographic printing is widely used in the packaging field, but there are still some problems in the printing of flexographic ink on non-absorbent substrates, such as low precision and unstable quality. In this paper, the printing process of flexographic ink is simulated. The interaction of fluid flow, temperature change, and solid deformation in flexographic printing is studied systematically by using the method of fluid–solid thermal coupling for the first time. The process of ink channel formation under static extrusion and fluid–solid thermal coupling was analyzed. The influences of printing pressure, printing speed, ink layer thickness, and ink viscosity on the ink channel were explored. The results show that the printing speed increases and the temperature in the stamping area increases. The printing speed is nonlinear related to the ink flow channel, the influence on the channel is slow at a low speed, the channel increases sharply at a medium and high speed, and tends to be stable at a high speed. When the printing speed is 200 m/min, the ink temperature in the stamping area is 1.5 °C higher than that at the entrance. With an increase in printing pressure, the ink flow channel width showed a trend of decreasing first and then stabilizing, and the pressure was about 0.4 MPa, showing a small fluctuation; the greater the pressure, the higher the temperature of the ink, which will change the performance of the ink and plate, causing adverse effects on the printing belt. The channel width showed obvious nonlinear characteristics with an increase and decrease in ink thickness. When the ink thickness is 30 μm, the deformation of the plate reaches the maximum, and the width of the ink circulation channel is correspondingly the widest. The change in ink viscosity has little influence on the stability of the ink's internal flow rate and temperature field. The research results provide theoretical support for the transfer of ink printing from gravure to flexo printing. [ABSTRACT FROM AUTHOR]

School maps emerged as new type of document as a result of a series of technological and educational advances spanning the 18th to the 20th century. These maps originally played strictly functional and didactic roles. The passage of time has endowed them with an indisputable historical, documentary, scientific and even artistic character. Those currently housed in archives are generally poorly preserved due to issues related to their manufacture and general lack of concern for their safeguard after losing their original function. This study aims to characterise the materials serving to manufacture them by sampling a series housed in the Archives of the University of Granada, a task that is complicated by their multilayered nature (cloth, paper, printing inks and protective varnish). Preliminary identification of the fibrous elements reinforcing the papers and textiles by means of micro-invasive analytical techniques enables to subsequently define appropriate conservation and restoration protocols. [ABSTRACT FROM AUTHOR]

[Display omitted] • 3D printing inks into liquid bath anti-solvent forms fibers in designated locations. • Structural and electronic properties are tunable by the anti-solvent. • Coiled carbon nanotube yarns stretch up to 50 % with under 1 % change in resistance. • Printed nanotube yarns have specific conductivity on par with metals. Inspired by methods of wet fiber spinning, we introduce a process using a 3D printer to create dense carbon nanotube (CNT) fibers and extensible coils with metal-like DC specific conductivity. An extrusion-based printer with an immersed nozzle extrudes a homogeneous shear-thinning ink (with initially < 1 % CNT concentration in water) into a liquid bath of antisolvent, inducing immediate precipitation-driven solidification slightly beyond the nozzle tip. This process forms continuous fibers of CNTs with conductivity up to 3 × 105 S/m, exceeding that of dense graphite and approaching that of CNTs spun from similar inks in a continuous fiber spinning process (6 × 105 S/m). The specific conductivity is up to 1 × 103 S m2/kg, comparable with gold (2.3 × 103 S m2/kg). The printing regimes are analyzed, with consideration of the draw ratio imposed during printing. Particular focus is placed on adjusting the speed of counter-diffusion of the ink solvent and the bath liquid, which allows for tuning of fiber diameter, conductivity, and specific conductivity respectively over ranges of one, four, and five orders of magnitude. The conductivity of resulting fibers is maximized when the speed of solvent counter-diffusion is high and the radius reduction is largest. When extrusion speed is also high relative to speed of the nozzle motion, a fluid mechanical coiling instability emerges which creates filaments with periodic coils, allowing for intricate designs to be formed along a linear extrusion path. Once dried, these densely coiled structures initially maintain their shape and can subsequently undergo up to 50 % strain with under 1 % change in resistance and 170 % linear extension with 20 % increase in resistance as the coils unwind. The resulting complex coil structures have applications in lightweight circuitry and as flexible interconnects. [ABSTRACT FROM AUTHOR]

In this study, Silicon Carbide (SiC) nanoparticle-based serigraphic printing inks were formulated to fabricate highly sensitive and wide temperature range printed thermistors. Inter-digitated electrodes (IDEs) were screen printed onto Kapton® substrate using commercially avaiable silver ink. Thermistor inks with different weight ratios of SiC nanoparticles were printed atop the IDE structures to form fully printed thermistors. The thermistors were tested over a wide temperature range form 25 °C to 170 °C, exhibiting excellent repeatability and stability over 15 h of continuous operation. Optimal device performance was achieved with 30 wt.% SiC-polyimide ink. We report highly sensitive devices with a TCR of −0.556%/°C, a thermal coefficient of 502 K (β -index) and an activation energy of 0.08 eV. Further, the thermistor demonstrates an accuracy of ±1.35 °C, which is well within the range offered by commercially available high sensitivity thermistors. SiC thermistors exhibit a small 6.5% drift due to changes in relative humidity between 10 and 90%RH and a 4.2% drift in baseline resistance after 100 cycles of aggressive bend testing at a 40° angle. The use of commercially available low-cost materials, simplicity of design and fabrication techniques coupled with the chemical inertness of the Kapton® substrate and SiC nanoparticles paves the way to use all-printed SiC thermistors towards a wide range of applications where temperature monitoring is vital for optimal system performance. [ABSTRACT FROM AUTHOR]

Among the conventional inks used for inkjet printing, metals, oxides, or polymers have been deposited in order to form functional coatings. Gold is one of the most used metals for electrode fabrication in the gas sensor field due to its inert behavior when exposed to reactive gases and conductive properties. However, only a few commercial gold inks are commercially available, and the combination of excessive price, a high minimum purchase quantity, and an unknown composition renders the actual products unappealing. To meet these shortcomings, gold inks were formulated with different solvents in order to reach sufficient properties for the inkjet printing process, such as surface tension and viscosity. On the one hand, gold ink was developed using a gold nanoparticle (AuNP) solution as the metal. This ink was optimized from nanoparticle synthesis, with the ink formulation obtaining a 32 mN·m−1 surface tension and 11.2 mPa·s viscosity in order to be inkjet-printed onto polyimide foil. On the other hand, a particle-free ink, called a precursor based of ink, was also developed. In this case, ink was made by solubilizing gold salt in aqueous medium in order to reach jettable properties. Surface tension was measured at 32 mN·m−1 while viscosity was 14.0 mPa·s. Then, printing and deposition parameters were optimized in order to obtain a highly conductive gold coating. The measured resistivity was 2 × 10−7 Ω·m which is close to the bulk gold conductive value. These coatings could be used for the fabrication of various devices in different working fields. [ABSTRACT FROM AUTHOR]

Adhesives and sealants show fine rheology with good physical and mechanical properties as viscous pastes, a possible starting point for developing direct ink writing (DIW) 3D printing ink. However, many commercial adhesives and sealants take days or weeks to cure fully. DIW 3D‐printed parts made directly from these sealants are not designed for a scalable manufacturing process and high‐volume production. Moreover, most of these adhesives and sealants have volume shrinkage during cure. A systematic understanding of formulation methods and design principles for an elastomeric silicone DIW ink can overcome these issues. This study presents the cogent formulation development of a 3D printable thermoset elastomer silicone that gels and cures isotropically in minutes, reducing cycle time for rapid ink development with no shrinkage during cure. More specifically, we outline the principles of raw material selection of a formulation to achieve excellent rheology, printability, synchronized working, and gel time fitting requirements closer to scalable manufacturing. The reaction kinetics and their corresponding 3D‐printed structural properties are also described. Interest in future work is toward a rational DIW 3D printing ink material development protocol and use of machine learning (ML). Highlights: Formulation method flexibility and design principle of DIW ink.Raw material selection principle to achieve optimal rheology for DIW printing.Ink gel kinetics for large‐scale DIW manufacturing.Hydrosilylation conversion over time at different ambient temperatures.Structural properties of DIW 3D printed parts. [ABSTRACT FROM AUTHOR]

This work provides a method for the development of conductive water-based printing inks for gravure, flexography and screen-printing incorporating commercial resins that are already used in the printing industry. The development of the respective conductive materials/pigments is based on the simultaneous (in one step) reduction of silver salts and graphene oxide in the presence of 2,5-diaminobenzenesulfonic acid that is used for the first time as the common in-situ reducing agent for these two reactions. The presence of aminophenylsulfonic derivatives is essential for the reduction procedure and in parallel leads to the enrichment of the graphene surface with aminophenylsulfonic groups that provide a high hydrophilicity to the final materials/pigments. [ABSTRACT FROM AUTHOR]

Osteogenic differentiation and bone regeneration can be effectively aided by porous scaffolds with multiscale cellular structures, making it easier to repair defects in bone tissue. Due to the scarcity of pore-forming agents, it is extremely challenging to fabricate interconnected hierarchically porous zirconia at multi-scale. This work described a novel and straightforward method for directly imprinting a slurry containing two pore-forming agents (microspherical and filamentary) to produce strong and highly porous zirconia (ZrO 2) ceramics with four levels of porosity ranging from nanometers to millimeters. The concentration of hemp fibers significantly affected printability when the rheological behavior of a zirconia slurry was examined. Utilizing a scanning electron microscope (SEM) to monitor the development of powder interstices under various sintering techniques. The permeability performance was assessed when simulated plasma had fully filled the scaffolds. The structure had a high compressive strength of 24.18 MPa, a porosity of 80.9 %, an apparent porosity of 55.7 %, and took just 1.11 s to fill a scaffold that was 15 mm high. It is anticipated that the proposed route will be expanded to include various engineering materials for structural and practical applications. [ABSTRACT FROM AUTHOR]

Metasurfaces, 2D arrays of nanostructures, have gained significant attention in recent years due to their ability to manipulate light at the subwavelength scale. Their diverse applications range from advanced optical devices to sensing and imaging technologies. However, the mass production of dielectric metasurfaces with tailored properties for visible light has remained a challenge. Therefore, the demand for efficient and cost‐effective fabrication methods for metasurfaces has driven the continuing development of various techniques. In this research article, a high‐throughput production method is presented for multifunctional dielectric metasurfaces in the visible light range using one‐step high‐index TiO2‐polymer composite (TPC) printing, which is a variant of nanoprinting lithography (NIL) for the direct replication of patterned multifunctional dielectric metasurfaces using a TPC material as the printing ink. The batch fabrication of dielectric metasurfaces is demonstrated with controlled geometry and excellent optical response, enabling high‐performance light‐matter interactions for potential applications of visible meta‐displays. [ABSTRACT FROM AUTHOR]

With the rapid development of the emerging intelligent, flexible, transparent, and wearable electronic devices, such as quantum-dot-based micro light-emitting diodes (micro-LEDs), thin-film transistors (TFTs), and flexible sensors, numerous pixel-level printing technologies have emerged. Among them, inkjet printing has proven to be a useful and effective tool for consistently printing micron-level ink droplets, for instance, smaller than 50 µm, onto wearable electronic devices. However, quickly and accurately determining the printing quality, which is significant for the electronic device performance, is challenging due to the large quantity and micron size of ink droplets. Therefore, leveraging existing image processing algorithms, we have developed an effective method and software for quickly detecting the morphology of printed inks served in inkjet printing. This method is based on the edge detection technology. We believe this method can greatly meet the increasing demands for quick evaluation of print quality in inkjet printing. [ABSTRACT FROM AUTHOR]

Nickel oxide (NiO) is a p-type material with a wide bandgap of 3.6 to 4 eV, and graphene is a zero-bandgap material. When the two materials are combined to form a composite, their structural, optical, and electrical properties are enhanced. This work presents the formulation of nickel oxide (NiO)–graphene composite ink (with ethylene glycol as a solvent) for the fabrication of thin-film electrodes using a direct ink writing technique. NiO is used in nanopowder form, which is prepared via a wet-chemical approach. NiO ink is prepared in three different concentrations of 40 mg/ml (N1), 60 mg/ml (N2), and 70 mg/ml (N3). Graphene ink (G) is also prepared in concentrations of 0.5 mg/ml (G1), 1 mg/ml (G2), and 2 mg/ml (G3). Among the pure NiO inks, it was observed that low resistance and uniform printing were obtained for N2. Therefore, N2 is mixed with different concentrations of graphene to form the composite ink, which is further printed on the substrates. The rheological properties of all the formulated inks are measured. An extrusion-based direct-write system is employed for printing the inks on a glass substrate. The printed samples are characterized before and after annealing at 250°C for 2 h. The resistance of the composite ink (N2G1) is decreased by 53% in comparison with the pure NiO ink (N2). As the conductivity of the composite ink thin film is in the range of MΩ, they could find application in the field of gas sensing and thermistors. [ABSTRACT FROM AUTHOR]

In spectral-based ink content measurement, improving the accuracy of the spectral collection system and reducing the algorithm complexity of the ink content measurement model are important aspects of research. This study designs a spectral collection system with an M-type Czerny–Turner optical path structure, uses a third-order polynomial fitting method for calibration analysis, collects the spectral of the standard color card and denoises it through Savitzky–Golay convolution smoothing, and establishes a functional relationship between the spectral and the logarithm of ink content. Uninformative Variable Elimination (UVE) and Competitive Adaptive Reweighting Sampling are used to perform comparative analysis on feature wavelength extraction, and a prediction model for printing ink content is established. Experimental results show that the R2 of ink C, ink M, and ink Y are 0.9981, 0.9975, and 0.9892, respectively, and the root mean square error is 0.0134, 0.0153, and 0.0317, respectively, showing good performance in ink prediction accuracy. [ABSTRACT FROM AUTHOR]

Gradient matters with hierarchical structures endow the natural world with excellent integrity and diversity. Currently, direct ink writing 3D printing is attracting tremendous interest, and has been used to explore the fabrication of 1D and 2D hierarchical structures by adjusting the diameter, spacing, and angle between filaments. However, it is difficult to generate complex 3D gradient matters owing to the inherent limitations of existing methods in terms of available gradient dimension, gradient resolution, and shape fidelity. Here, we report a filament diameter-adjustable 3D printing strategy that enables conventional extrusion 3D printers to produce 1D, 2D, and 3D gradient matters with tunable heterogeneous structures by continuously varying the volume of deposited ink on the printing trajectory. In detail, we develop diameter-programmable filaments by customizing the printing velocity and height. To achieve high shape fidelity, we specially add supporting layers at needed locations. Finally, we showcase multi-disciplinary applications of our strategy in creating horizontal, radial, and axial gradient structures, letter-embedded structures, metastructures, tissue-mimicking scaffolds, flexible electronics, and time-driven devices. By showing the potential of this strategy, we anticipate that it could be easily extended to a variety of filament-based additive manufacturing technologies and facilitate the development of functionally graded structures. Direct ink writing of complex 3D gradient structures can be challenging due to inherent method limitations. Here, the authors report continuous diameter-adjustable filament by varying printing speed and height and enable extrusion 3D printers to produce complex gradient porous matters. [ABSTRACT FROM AUTHOR]

Three-dimensional printing provides more versatility in the fabrication of scaffold materials for hard and soft tissue replacement, but a critical component is the ink. The ink solution should be biocompatible, stable, and able to maintain scaffold shape, size, and function once printed. This paper describes the development of a collagen ink that remains in a liquid pre-fibrillized state prior to printing. The liquid stability occurs due to the incorporation of ethylenediaminetetraacetic acid (EDTA) during dialysis of the collagen. Collagen inks were 3D-printed using two different printers. The resulting scaffolds were further processed using two different chemical crosslinkers, 1-Ethyl-3-[3-dimethylaminopropyl]carbodiimide hydrochloride)/N-hydroxysuccinimide (EDC/NHS) and genipin; gold nanoparticles were conjugated to the scaffolds. The 3D-printed scaffolds were characterized to determine their extrudability, stability, amount of AuNP conjugated, and overall biocompatibility via cell culture studies using fibroblast cells and stroma cells. The results demonstrated that the liquid collagen ink was amendable to 3D printing and was able to maintain its 3D shape. The scaffolds could be conjugated with gold nanoparticles and demonstrated enhanced biocompatibility. It was concluded that the liquid collagen ink is a good candidate material for the 3D printing of tissue scaffolds. [ABSTRACT FROM AUTHOR]

This study explored the development of polyvinylpyrrolidone (PVP)–honey-gel (PHG) through 3D printing, aiming to develop a multifunctional bio-tape with adhesive and degradable properties. Based on the potential of honey to promote wound healing due to its antibacterial and anti-inflammatory properties, a PVP–honey-based 3D printing ink was developed by combining honey and PVP to create PHG through 3D printing technology that can form a film with strong adhesion and flexibility. First, the chemical–physical properties of PHG and its 3D printing performance were characterized. The line width achievable in 3D printing for the PHG line can extend to ∼100 µm. In addition, the adhesive properties of the PHG film were evaluated by using a 180° peeling test on various materials (glass, copper, wood, and pig skin), highlighting its potential for diverse applications. Finally, the application of the PHG film as a bio-tape was demonstrated through a successful animal experiment on a rabbit's skin wound. Due to its adhesive and degradable properties, the bio-tape exhibited 3D conformability and ease of removal without residue. [ABSTRACT FROM AUTHOR]

Personalized healthcare management is an emerging field that requires the development of environment‐friendly, integrated, and electrochemical multimodal devices. In this study, the concept of integrated paper‐based biosensors (IFP−Multi) for personalized healthcare management is introduced. By leveraging ink printing technology and a ChatGPT–bioelectronic interface, these biosensors offer ultrahigh areal‐specific capacitance (74633 mF cm−2), excellent mechanical properties, and multifunctional sensing and humidity power generation capabilities. More importantly, the IFP−Multi devices have the potential to simulate deaf‐mute vocalization and can be integrated into wearable sensors to detect muscle contractions and bending motions. Moreover, they also enable monitoring of physiological signals from various body parts, such as the throat, nape, elbow, wrist, and knee, and successfully record sharp and repeatable signals generated by muscle contractions. In addition, the IFP−Multi devices demonstrate self‐powered handwriting sensing and moisture power generation for sweat‐sensing applications. As a proof‐of‐concept, a GPT 3.5 model‐based fine‐tuning and prediction pipeline that utilizes recorded physiological signals through IFP−Multi is showcased, enabling artificial intelligence with multimodal sensing capabilities for personalized healthcare management. This work presents a promising and ecofriendly approach to developing paper‐based electrochemical multimodal devices, paving the way for a new era of healthcare advancements. [ABSTRACT FROM AUTHOR]

The application of 3D printing to calcium phosphates has opened unprecedented possibilities for the fabrication of personalized bone grafts. However, their biocompatibility and bioactivity are counterbalanced by their high brittleness. In this work we aim at overcoming this problem by developing a self-hardening ink containing reactive ceramic particles in a polycaprolactone solution instead of the traditional approach that use hydrogels as binders. The presence of polycaprolactone preserved the printability of the ink and was compatible with the hydrolysis-based hardening process, despite the absence of water in the ink and its hydrophobicity. The microstructure evolved from a continuous polymeric phase with loose ceramic particles to a continuous network of hydroxyapatite nanocrystals intertwined with the polymer, in a configuration radically different from the polymer/ceramic composites obtained by fused deposition modelling. This resulted in the evolution from a ductile behavior, dominated by the polymer, to a stiffer behavior as the ceramic phase reacted. The polycaprolactone binder provides two highly relevant benefits compared to hydrogel-based inks. First, the handleability and elasticity of the as-printed scaffolds, together with the proven possibility of eliminating the solvent, opens the door to implanting the scaffolds freshly printed once lyophilized, while in a ductile state, and the hardening process to take place inside the body, as in the case of calcium phosphate cements. Second, even with a hydroxyapatite content of more than 92 wt.%, the flexural strength and toughness of the scaffolds after hardening are twice and five times those of the all-ceramic scaffolds obtained with the hydrogel-based inks, respectively. Overcoming the brittleness of ceramic scaffolds would extend the applicability of synthetic bone grafts to high load-bearing situations. In this work we developed a 3D printing ink by replacing the conventional hydrogel binder with a water-free polycaprolactone solution. The presence of polycaprolactone not only enhanced significantly the strength and toughness of the scaffolds while keeping the proportion of bioactive ceramic phase larger than 90 wt.%, but it also conferred flexibility and manipulability to the as-printed scaffolds. Since they are able to harden upon contact with water under physiological conditions, this opens up the possibility of implanting them immediately after printing, while they are still in a ductile state, with clear advantages for fixation and press-fit in the bone defect. [Display omitted] [ABSTRACT FROM AUTHOR]

Highlights: Naturally crosslinked carbonaceous liquid metal aqueous printable ink mediated by biopolymers. E-textile with conductivity, stability, wearability, and aesthetic characteristics. Multi-applications in health monitoring, pressure sensing, and energy harvesting. Achieving flexible electronics with comfort and durability comparable to traditional textiles is one of the ultimate pursuits of smart wearables. Ink printing is desirable for e-textile development using a simple and inexpensive process. However, fabricating high-performance atop textiles with good dispersity, stability, biocompatibility, and wearability for high-resolution, large-scale manufacturing, and practical applications has remained challenging. Here, water-based multi-walled carbon nanotubes (MWCNTs)-decorated liquid metal (LM) inks are proposed with carbonaceous gallium–indium micro-nanostructure. With the assistance of biopolymers, the sodium alginate-encapsulated LM droplets contain high carboxyl groups which non-covalently crosslink with silk sericin-mediated MWCNTs. E-textile can be prepared subsequently via printing technique and natural waterproof triboelectric coating, enabling good flexibility, hydrophilicity, breathability, wearability, biocompatibility, conductivity, stability, and excellent versatility, without any artificial chemicals. The obtained e-textile can be used in various applications with designable patterns and circuits. Multi-sensing applications of recognizing complex human motions, breathing, phonation, and pressure distribution are demonstrated with repeatable and reliable signals. Self-powered and energy-harvesting capabilities are also presented by driving electronic devices and lighting LEDs. As proof of concept, this work provides new opportunities in a scalable and sustainable way to develop novel wearable electronics and smart clothing for future commercial applications. [ABSTRACT FROM AUTHOR]

Surface interactions of the materials during and after the printing process are extremely important for understanding and optimizing the process of graphic reproduction. In screen printing on porous and absorbent substrates, mesh type and ink composition significantly influence the properties of the printed product. To protect the absorbent printing substrates such as board from moisture penetration and to ensure the optimal interaction of the printed ink layer and the substrate, board substrates can be coated with protective primers before printing. In this research, biodegradable primers made of poly(ɛ-caprolactone) and poly(lactic acid) were applied on the board substrate which was then screen-printed using two screen rulings of the mesh and two different types of water-based printing inks on unprimed and primed board substrates. Printed ink layer thickness, surface roughness, water vapor transmission rate, surface free energy and adhesion parameters were measured/calculated on all produced samples. Microscopy of the printed elements was performed to visualize the influence of the primers on the printed line edge. Results of the research have shown that the primers influence the roughness reduction of the printed ink layer. Furthermore, thickness of the printed ink layers increased when the primers were applied on the substrate, pointing to the decreased permeability of the board, which was confirmed by the reduced water vapor transmission rate of the primed and printed substrates. The surface free energies of the tested surfaces and the adhesion parameters between biodegradable primers and prepared printing inks differed depending on the type of the ink and primer, pointing to the optimal combination of the primer and ink for the favorable acceptance of printing ink on the substrate. Results of this research have enabled the optimization of the quality of screen-printed board product. [ABSTRACT FROM AUTHOR]

Additive manufacturing capable of controlling and dynamically modulating structures down to the nanoscopic scale remains challenging. By marrying additive manufacturing with self-assembly, we develop a UV (ultra-violet)-assisted direct ink write approach for on-the-fly modulation of structural color by programming the assembly kinetics through photo-cross-linking. We design a photo-cross-linkable bottlebrush block copolymer solution as a printing ink that exhibits vibrant structural color (i.e., photonic properties) due to the nanoscopic lamellar structures formed post extrusion. By dynamically modulating UV-light irradiance during printing, we can program the color of the printed material to access a broad spectrum of visible light with a single ink while also creating color gradients not previously possible. We unveil the mechanism of this approach using a combination of coarse-grained simulations, rheological measurements, and structural characterizations. Central to the assembly mechanism is the matching of the cross-linking timescale with the assembly timescale, which leads to kinetic trapping of the assembly process that evolves structural color from blue to red driven by solvent evaporation. This strategy of integrating cross-linking chemistry and out-of-equilibrium processing opens an avenue for spatiotemporal control of self-assembled nanostructures during additive manufacturing. [ABSTRACT FROM AUTHOR]

Human exploratory missions to Moon or Mars are considered the next steps in human space exploration. Such activities result in the exposure of humans to the space environment for long time, especially under the constraints of orbital dynamics as with increasing distances from earth quick return possibilities are ruled out. Crews on these kinds of missions must be self-sustaining in medical treatments, as environmental conditions in space, such as the influence of altered gravity, radiation or isolation, raise health issues. Therefore, astronauts may use the here presented Handheld Bioprinter as part of the first-aid strategy for in situ wound treatment. The device consists of a handle capable of holding an exchangeable "Ink Printing Unit" containing two separate gel-like components (Bioink and Crosslinker), which are extruded during a printing process through a nozzle and form a skin-cell containing bioink band-aid. For ISS experiments cell simulants were used, as in-space experiments first demonstrated the general feasibility of handheld bioprinting under space conditions. On-ground human skin cells were mixed with the biogel, printed via the handheld bioprinter and cultivated, to demonstrate the overall feasibility of the "Bioprint FirstAid" technology. Concluding results were that a mobile, handheld tool like the bioprinter shows good applicability and offers a possibility of in situ wound treatment for in-space applications. The "Bioprint FirstAid" project was coordinated by the German Space Agency at the German Aerospace Center (DLR) in Bonn and funded by the Federal Ministry for Economic Affairs and Climate Action (BMWK). • Handheld Bioprinter offers possibility for in-situ wound treatment in future in-space applications • Human skin cells proliferate in biogels after printing with handheld bioprinter • The customizable Ink-printing unit and nozzle can be tailored to specific printing demands • Bioprinter device has low susceptibility to failure, has a robust design, no electronics, and maintenance-free mechanics • German Astronaut Matthias Maurer conducted the Bioprinting experiment successfully on board the ISS [ABSTRACT FROM AUTHOR]

We report the design, fabrication, and experimental characterization of an optically transparent printed planar inverted-F antenna (PIFA) operating at 2.45 GHz using the aerosol jet (AJ) printing method. The proposed antenna was fabricated using a clear conductive ink on glass and Delrin. The antenna exhibits a wide fractional bandwidth (FBW) of 20% centered at 2.45 GHz, with a peak realized gain of −3.6 dBi and transparency of ~80%. The proposed fabrication method provides a cost-effective and scalable solution for manufacturing transparent antennas with potential applications in wireless communication, sensing, and wearable devices operating at mmWave frequencies higher than 30 GHz. [ABSTRACT FROM AUTHOR]

Vegetables are healthy foods with nutritional benefits; however, nearly one‐third of the world's vegetables are lost each year, and some of the losses happen due to the imperfect shape of the vegetables. In this study, imperfect vegetables (i.e., broccoli and carrots) were upcycled into freeze‐dried powders to improve their shelf‐life before they were formed into food inks for 3D printing. The rheology of the food inks, color analysis of the uncooked and cooked designs, and texture analysis of the cooked designs were determined. The inks with 50% and 75% vegetables provided the best printability and shape fidelity. 3D printing at these conditions retained a volume comparable to the digital file (14.4 and 14.3 cm3 vs. 14.6 cm3, respectively). The control, a wheat flour‐based formulation, showed the lowest level of stability after 3D printing. The viscosity results showed that all the food inks displayed shear‐thinning behavior, with broccoli having the greatest effect on viscosity. There was a significant color difference between uncooked and cooked samples, as well as between different formulations. The hardness of the baked 3D‐printed samples was affected by the type and content of vegetable powders, where carrot‐based snacks were notably harder than snacks containing broccoli. Overall, the results show that 3D food printing can be potentially used to reduce the loss and waste of imperfect vegetables. [ABSTRACT FROM AUTHOR]

This work demonstrates successful large area inkjet printing of a thermally activated delayed fluorescence (TADF) material as the emitting layer of organic light-emitting diodes (OLEDs). TADF materials enable efficient light emission without relying on heavy metals such as platinum or iridium. However, low-cost manufacturing of large-scale TADF OLEDs has been restricted due to their incompatibility with solution processing techniques. In this study, we develop ink formulation for a TADF material and show successful ink jet printing of intricate patterns over a large area (6400 mm2) without the use of any lithography. The stable ink is successfully achieved using a non-chlorinated binary solvent mixture for a solution processable TADF material, 3‐(9,9‐dimethylacridin‐10(9H)‐yl)‐9H‐xanthen‐9‐one dispersed in 4,4'-bis-(N-carbazolyl)-1,1'-biphenyl host. Using this ink, large area ink jet printed OLEDs with performance comparable to the control spin coated OLEDs are successfully achieved. In this work, we also show the impact of ink viscosity, density, and surface tension on the droplet formation and film quality as well as its potential for large-area roll-to-roll printing on a flexible substrate. The results represent a major step towards the use of TADF materials for large-area OLEDs without employing any lithography. Low-cost manufacturing of large-scale thermally activated delayed fluorescence organic light-emitting diodes has been restricted due to their incompatibility with solution processing techniques. Here, authors develop inkjet printing ink formulation to fabricate patterns without use of lithography. [ABSTRACT FROM AUTHOR]

Different statistical approaches were used to analyze the rheological properties of a rice-protein-based product before and after printing. The printing ink was composed of 30% rice protein and 70% water, with the addition of 0.5% xanthan gum. Printing parameters: The layer height (1 and 1.5 mm), printing speed (50 and 35 mm/s), and nozzle diameter (1.2 and 1.7 mm) were evaluated. Rheological properties were determined before and after printing using an oscillatory test from 0.1 to 10 Hz at 1 Pa. The decomposition of the curves into principal components helped us better understand the variations of the rheological properties along the frequency, differentiating the samples before and after printing. [ABSTRACT FROM AUTHOR]

This report presents an additive manufacturing approach, for the first time, to producing high-entropy oxides (HEOs) using a 3D extrusion-based technique with oxide precursors. The precursors were prepared by a wet chemical method from sulfates. Additives were utilized to optimize the rheological properties of the printing inks with these precursors, and the properties of the printed HEOs were improved by increasing the solid content of the inks. When ink with a solid content of 78 wt% was used for printing, the resulting HEO exhibited a relative density of 92% and a high dielectric constant after undergoing pressureless sintering at 800 °C. Compared to traditional methods of manufacturing HEOs, the 3D extrusion technique is a very promising method for producing HEOs with complex geometries. [ABSTRACT FROM AUTHOR]

The current high production of plastics has prompted the exploration of alternative pathways to facilitate recycling, aiming for a progressively sustainable society. This paper presents an alternative and affordable technology for treating waste expanded polystyrene (EPS) mixed with acetone in a 100:1 volume ratio to be used as 3D printing ink for Direct Ink Write technology. In order to optimize the printing parameters, a comprehensive study was conducted, evaluating different needle diameters, printing speeds, and bed temperature values to achieve homogenous pieces and a highly repeatable 3D printing process. Results showed that the main optimum printing parameters were using needles with diameters of 14 to 16 G and printing speeds ranging from 2 to 12 mm/s, which were found to yield the most uniform ribbons. Increasing the bed temperature, despite favoring acetone evaporation, led to the generation of more heterogeneous structures due to void growth inside the printed ribbons. Thus, employing room temperature for the bed proved to be the optimal value. Lastly, a comparative study between the starting material and the EPS after the printing process was conducted using FTIR-ATR and GPC analyses, ensuring the preservation of the original polymer's integrity during physical recycling. [ABSTRACT FROM AUTHOR]

This work demonstrates the green production of a graphene ink for inkjet printing and its use as a hole transport layer (HTL) in an organic solar cell. Graphene as an HTL improves the selective hole extraction at the anode and prevents charge recombination at the electronic interface and metal diffusion into the photoactive layer. Graphite was exfoliated in water, concentrated by iterative centrifugation, and characterized by Raman. The concentrated graphene ink was incorporated into inverted organic solar cells by inkjet printing on the active polymer in an ambient atmosphere. Argon plasma was used to enhance wetting of the polymer with the graphene ink during printing. The argon plasma treatment of the active polymer P3HT:PCBM was investigated by XPS, AFM and contact angle measurements. Efficiency and lifetime studies undertaken show that the device with graphene as HTL is fully functional and has good potential for an inkjet printable and flexible alternative to PEDOT:PSS. [ABSTRACT FROM AUTHOR]

In recent years, researchers prepared composite conductive inks with high conductivity, high thermal conductivity, strong stability, and excellent comprehensive mechanical properties by combining carbon-based materials such as graphene and carbon nanotubes with metal-based materials. Through new electronic printing technologies, conductive inks can be used not only to promote the development of integrated circuits but also in various new electronic products. The conductive mechanism and the main types of conductive inks are introduced in this review. The advantages of electronic printing technology for preparing integrated circuits are analyzed. The research progress of fabricating integrated circuits with different electronic printing processes, such as screen printing, gravure printing, flexographic printing, and inkjet printing, are summarized. The development trend of carbon-based composite conductive ink for integrated circuits is prospected. [ABSTRACT FROM AUTHOR]

Droplets of alcohol-based formulations are common in applications from sanitizing sprays to printing inks. However, our understanding of the drying dynamics of these droplets on surfaces and the influence of ambient humidity is still very limited. Here, we report the drying dynamics of picoliter droplets of isopropyl alcohol deposited on a surface under controlled humidity. Condensation of water vapor in the ambient environment onto alcohol droplets leads to unexpectedly complex drying behavior. As relative humidity (RH) increases, we observed a variety of phenomena including enhanced spreading, nonmonotonic changes in the drying time, the formation of pancake-like shapes that suppress the coffee-ring effect, and the formation of waterrich films around an alcohol-rich drop. We developed a lubrication model that accounts for the coupling between the flow field within the drop, the shape of the drop, and the vapor concentration field. The model reproduces many of the experimentally observed morphological and dynamic features, revealing the presence of unusually large spatial compositional gradients within the evaporating droplet and surface-tension-gradientdriven flows arising from water condensation/evaporation at the surface of the droplet. One unexpected feature from the simulation is that water can evaporate and condense concurrently in different parts of the drop, providing fundamental insights that simpler models based on average fluxes lack. We further observed rim instabilities at higher RH that are well-described by a model based on the Rayleigh-Plateau instability. Our findings have implications for the testing and use of alcohol-based disinfectant sprays and printing inks. [ABSTRACT FROM AUTHOR]

Critical-size bone defects of complex geometries are challenging to repair, making current approaches less satisfactory. Although calcium silicate (CaS) scaffolds prepared using 3D printing can be promising, these scaffolds are commonly treated with harsh conditions to reinforce their strength, significantly affecting the activity of biomolecules in the scaffolds. In this study, we developed a novel CaS biomaterial ink that did not require harsh post-treatments. It is shown that the printability was significantly improved using polyethylene glycol (PEG) and pluronic F-127 (PF), and the scaffolds showed excellent shape fidelity after printing. Moreover, the scaffolds demonstrated compatible mechanical strength with trabecular bone (∼7.07 MPa vs. 0.6 ∼ 16.8 MPa), and adding teriparatide (TP) in scaffolds could further improve the scaffold's potential for bone tissue engineering. [Display omitted] [ABSTRACT FROM AUTHOR]

In recent years, there has been a huge surge in interest in improving the efficiency of smart electronic and optoelectronic devices via the development of novel materials and printing technologies. Inkjet printing, known to deposit 'ink on demand', helps to reduce the consumption of materials. Printing inks on various substrates like paper, glass, and fabric is possible, generating flexible devices that include supercapacitors, sensors, and electrochromic devices. Newer inks being tested and used include formulations of carbon nanoparticles, photochromic dyes, conducting polymers, etc. Among the conducting polymers, PANI has been well researched. It can be synthesized and doped easily and allows for the easy formation of composite conductive inks. Doping and the addition of additives like metal salts, oxidants, and halide ions tune its electrical properties. PANI has a large specific capacitance and has been researched for its applications in supercapacitors. It has been used as a sensor for pH and humidity as well as a biosensor for sweat, blood, etc. The response is generated by a change in its electrical conductivity. This review paper presents an overview of the investigations on the formulation of the inks based on conductive polymers, mainly centered around PANI, and inkjet printing of its formulations for a variety of devices, including supercapacitors, sensors, electrochromic devices, and patterning on flexible substrates. It covers their performance characteristics and also presents a future perspective on inkjet printing technology for advanced electronic, optoelectronic, and other conductive-polymer-based devices. We believe this review provides a new direction for next-generation conductive-polymer-based devices for various applications. [ABSTRACT FROM AUTHOR]

A hydrogel system with the ability to control the delivery of multiple drugs has gained increasing interest for localized disease treatment and tissue engineering applications. In this study, a triple-drug-loaded model based on a core/shell fiber system (CFS) was fabricated through the co-axial 3D printing of hydrogel inks. A CFS with drug 1 loaded in the core, drug 2 in the shell part, and drug 3 in the hollow channel of the CFS was printed on a rotating collector using a co-axial nozzle. Doxorubicin (DOX), as the model drug, was selected to load in the core, with the shell and channel part of the CFS represented as drugs 1, 2, and 3, respectively. Drug 2 achieved the fastest release, while drug 3 showed the slowest release, which indicated that the three types of drugs printed on the CFS spatially can achieve sequential triple-drug release. Moreover, the release rate and sustained duration of each drug could be controlled by the unique core/shell helical structure, the concentration of alginate gels, the cross-linking density, the size and number of the open orifices in the fibers, and the CFS. Additionally, a near-infrared (NIR) laser or pH-responsive drug release could also be realized by introducing photo-thermal materials or a pH-sensitive polymer into this system. Finally, the drug-loaded system showed effective localized cancer therapy in vitro and in vivo. Therefore, this prepared CFS showed the potential application for disease treatment and tissue engineering by sequential- or stimulus-responsively releasing multi-drugs. [ABSTRACT FROM AUTHOR]

Rare-earth-doped NaYF 4 nanoparticles are considered crucial upconversion luminescent materials with many applications, including anti-counterfeiting printing, biological imaging, and optical information storage. This work presents progress in obtaining hydrophilic pigments based on NaYF 4 :Er,Yb@SiO 2 nanoparticles, and their utilization in water-based ink printing for anti-counterfeiting applications. Coating NaYF 4 :Yb/Er microparticles with SiO 2 shells can provide several benefits for printing purposes, such as improved stability, dispersion, and ease of printing. The hydrophilic core-shell structured β-NaYF 4 :Er, Yb@SiO 2 microparticles were successfully prepared using the hydrothermal synthesis and sol-gel Stober method. The obtained microparticles were characterized by Scanning Electron Microscopy, X-ray diffraction, and Energy-dispersive X-ray spectroscopy. Such characterizations confirm that the Er3+ and Yb3+ ions are incorporated in NaYF 4 cores, the NaYF 4 :Er, Yb cores are in hundreds of nanometer sizes, and the NaYF 4 :Er, Yb microparticles are coated by a silica layer of 50 nm thick. Both NaYF 4 :Er, Yb and NaYF 4 :Er, Yb@SiO 2 behave as up-conversion luminescent microparticles for both green and red emissions. The CIE chromaticity coordinates indicate that both the nanoparticles have their greenish color under excitation at 980 nm. Although decorating the NaYF 4 :Er, Yb nanoparticles with the SiO 2 shell decreases luminescent intensity (by a factor of 2), this step is still necessary to achieve hydrophilic surfaces for preparing water-based printing inks. Using the synthesized NaYF 4 :Er, Yb@SiO 2 as a pigment, a new water-based ink formula was created based on Polyamide as a polymer matrix. The obtained ink is printable on paper and on transparent and flexible Polyethylene substrate. The printed patterns with a height of 2 cm and a width of 2.5 cm were observed clearly under the irradiation of a 980 nm LED. Their durability in terms of sharpness and color was also assessed after six months. [ABSTRACT FROM AUTHOR]

A passive, low‐cost, paper‐based intelligent reflecting surface (IRS) is designed to reflect a signal in a desired direction to overcome non‐line‐of‐sight scenarios in indoor environments. The IRS is fabricated using conductive silver ink printed on paper with a specific nanoparticle arrangement, yielding a cost‐effective paper‐based IRS that can easily be mass‐produced. Full‐wave numerical simulation results were consistent with measurement results, demonstrating the IRS's ability to reflect incident waves into a desired nonspecular direction based on the inkjet‐printed design and materials. [ABSTRACT FROM AUTHOR]