Search

Full- and reduced-order observers have been used in many engineering applications, particularly for energy systems. Applications of observers to energy systems are twofold: (1) the use of observed variables of dynamic systems for the purpose of feedback control and (2) the use of observers in their own right to observe (estimate) state variables of particular energy processes and systems. In addition to the classical Luenberger-type observers, we will review some papers on functional, fractional, and disturbance observers, as well as sliding-mode observers used for energy systems. Observers have been applied to energy systems in both continuous and discrete time domains and in both deterministic and stochastic problem formulations to observe (estimate) state variables over either finite or infinite time (steady-state) intervals. This overview paper will provide a detailed overview of observers used for linear and linearized mathematical models of energy systems and review the most important and most recent papers on the use of observers for nonlinear lumped (concentrated)-parameter systems. The emphasis will be on applications of observers to renewable energy systems, such as fuel cells, batteries, solar cells, and wind turbines. In addition, we will present recent research results on the use of observers for distributed-parameter systems and comment on their actual and potential applications in energy processes and systems. Due to the large number of papers that have been published on this topic, we will concentrate our attention mostly on papers published in high-quality journals in recent years, mostly in the past decade. [ABSTRACT FROM AUTHOR]

This work addresses the control of a pinned-pinned beam represented by the fourth order partial differential equation commonly known as the Euler–Bernoulli beam model. The system under consideration has pinned boundary conditions on one end (displacement and bending moment fixed at zero) and controlled boundary conditions on the other end (displacement and bending moment are prescribed by control functions). There are also unknown bounded disturbances included on the controlled boundary. A backstepping control technique which introduces arbitrary damping into the system is discussed, and a method for applying this control in the presence of unknown disturbances is developed using sliding mode control theory. Sliding mode controllers are developed in a way that does not create a chattering effect, which is a common issue with sliding mode control. Simulation results are presented to show how the system dampens out vibrations at an arbitrarily determined rate and how the control functions respond to unmodeled disturbances. [ABSTRACT FROM AUTHOR]

This paper presents a Proton-Exchange Membrane Fuel Cell (PEMFC) transient model in stack current cycling conditions and its partial optimal control. The derived model is used for a specific application of the recently published multistage control technique developed by the authors. The presented control-oriented transient PEMFC model is an extension of the steady-state control-oriented model previously established by the authors. The new model is experimentally validated for transient operating conditions on the Greenlight Innovation G60 testing station where the comparison of the experimental and simulation results is presented. The derived five-state nonlinear control-oriented model is linearized, and three clusters of eigenvalues can be clearly identified. This specific feature of the linearized model is known as the three timescale system. A novel multistage optimal control technique is particularly suitable for this class of systems. It is shown that this control technique enables the designer to construct a local LQR, pole-placement or any other linear controller type at the subsystem level completely independently, which further optimizes the performance of the whole non-decoupled system. [ABSTRACT FROM AUTHOR]