Search

This paper focuses on the development of the formulation of modified amino-formaldehyde oligomers, the study of their properties, obtaining impregnation compositions based on them and the study of the properties of the finished product -reinforced wood particle board. As a modifying component we chose ethylene glycol, salts of organic acids (modifier CN) and alloying additive “OLIGO LD”. Ethylene glycol at the stage of synthesis was used to improve stability and elasticity of oligomers. The CN modifier was introduced during the synthesis of oligomers, which allowed to influence the properties of the obtained products in a directed way.

In this paper we study the possibility of using modified amino-formaldehyde resins in the production of moisture-resistant wood particle boards. As a modifier of amino-formaldehyde resins it is proposed to use a by-product of melamine production -melan, which is a powder of light brown color, insoluble in water. Melan in its chemical composition and properties is largely similar to melamine, but unlike the latter it is an available raw material for the synthesis of polymers. This is the high market value of commercial melamine. Melamine, on the other hand, is often a waste product that is absolutely free. Aminoformaldehyde resins modified with melamine, despite its dark coloring, provide particleboards with a coloring identical to those obtained from conventional aminoformaldehyde resins. However, the properties of the obtained materials allow them to be classified as moisture-resistant.

This paper considers one of the key production problems associated with the production of environmentally friendly particle boards (reinforced wood particle board) based on aminoformaldehyde binders that meet all the necessary requirements of modern standards. One of the promising solutions to this problem can be the use of reactive technological additive, which has a complex action: catalyst for curing the binder and acceptor of free formaldehyde contained in the binder. The proposed action will allow to produce boards with high physical and mechanical characteristics and minimum content of free formaldehyde, which can indicate a high quality of the products and expand the scope of these composite materials, including production of furniture for home and children's institutions.

Evidence suggests that beta-amyloid (Aβ)-induced phosphorylation/aggregation of tau protein plays a critical role in the degeneration of neurons and development of Alzheimer's disease (AD), the most common cause of dementia affecting the elderly population. Many studies have pursued a variety of small molecules, including nanoparticles conjugated with drugs to interfere with Aβ and/or tau aggregation/toxicity as an effective strategy for AD treatment. We reported earlier that FDA approved PLGA nanoparticles without any drug can attenuate Aβ aggregation/toxicity in cellular/animal models of AD. In this study, we evaluated the effects of native PLGA on Aβ seed-induced aggregation of tau protein using a variety of biophysical, structural and spectroscopic approaches. Our results show that Aβ 1-42 seeds enhanced aggregation of tau protein in the presence and absence of heparin and the effect was attenuated by native PLGA nanoparticles. Interestingly, PLGA inhibited aggregation of both 4R and 3R tau isoforms involved in the formation of neurofibrillary tangles in AD brains. Furthermore, Aβ seed-induced tau aggregation in the presence of arachidonic acid was suppressed by native PLGA. Collectively, our results suggest that native PLGA nanoparticles can inhibit the Aβ seed-induced aggregation of different tau protein isoforms highlighting their therapeutic implication in the treatment of AD., (© 2024. The Author(s).)

Environmental factors, mainly oxidative stress and exposure to sunlight, induce the oxidation, cross-linking, cleavage, and deamination of crystallin proteins, resulting in their aggregation and, ultimately, cataract formation. Various denaturants have been used to initiate the aggregation of crystallin proteins in vitro. All of these regimens, however, are obviously far from replicating conditions that exist in vivo that lead to cataract formation. In fact, it is our supposition that only UV-B radiation may mimic the observed in vivo cause of crystallin alteration leading to cataract formation. This means of inducing cataract formation may provide the most appropriate in vitro platform for in-depth study of the fundamental cataractous fibril properties and allow for testing of possible treatment strategies. Herein, we showed that cataractous fibrils can be formed using UV-B radiation from α:β:γ crystallin protein mixtures. Characterization of the properties of formed aggregates confirmed the development of amyloid-like fibrils, which are in cross-β-pattern and possibly in anti-parallel β-sheet arrangement. Furthermore, we were also able to confirm that the presence of the molecular chaperone, α-crystallin, was able to inhibit fibril formation, as observed for 'naturally' occurring fibrils. Finally, the time-dependent fibrillation profile was found to be similar to the gradual formation of age-related nuclear cataracts. This data provided evidence for the initiation of fibril formation from physiologically relevant crystallin mixtures using UV-B radiation, and that the formed fibrils had several traits similar to that expected from cataracts developing in vivo.

Prion diseases are fatal neurodegenerative diseases associated with the conversion of cellular prion protein (PrP(C)) in the central nervous system into the infectious isoform (PrP(Sc)). The mechanics of conversion are almost entirely unknown, with understanding stymied by the lack of an atomic-level structure for PrP(Sc). A number of pathogenic PrP(C) mutants exist that are characterized by an increased propensity for conversion into PrP(Sc) and that differ from wild-type by only a single amino-acid point mutation in their primary structure. These mutations are known to perturb the stability and conformational dynamics of the protein. Understanding of how this occurs may provide insight into the mechanism of PrP(C) conversion. In this work we sought to explore wild-type and pathogenic mutant prion protein structure and dynamics by analysis of the current fluctuations through an organic α-hemolysin nanometer-scale pore (nanopore) in which a single prion protein has been captured electrophoretically. In doing this, we find that wild-type and D178N mutant PrP(C), (a PrP(C) mutant associated with both Fatal Familial Insomnia and Creutzfeldt-Jakob disease), exhibit easily distinguishable current signatures and kinetics inside the pore and we further demonstrate, with the use of Hidden Markov Model signal processing, accurate discrimination between these two proteins at the single molecule level based on the kinetics of a single PrP(C) capture event. Moreover, we present a four-state model to describe wild-type PrP(C) kinetics in the pore as a first step in our investigation on characterizing the differences in kinetics and conformational dynamics between wild-type and D178N mutant PrP(C). These results demonstrate the potential of nanopore analysis for highly sensitive, real-time protein and small molecule detection based on single molecule kinetics inside a nanopore, and show the utility of this technique as an assay to probe differences in stability between wild-type and mutant prion proteins at the single molecule level.

Human wild-type superoxide dismutase-1 (wtSOD1) is known to coaggregate with mutant SOD1 in familial amyotrophic lateral sclerosis (FALS), in double transgenic models of FALS, and in cell culture systems, but the structural determinants of this process are unclear. Here we molecularly dissect the effects of intracellular and cell-free obligately misfolded SOD1 mutant proteins on natively structured wild-type SOD1. Expression of the enzymatically inactive, natural familial ALS SOD1 mutations G127X and G85R in human mesenchymal and neural cell lines induces misfolding of wild-type natively structured SOD1, as indicated by: acquisition of immunoreactivity with SOD1 misfolding-specific monoclonal antibodies; markedly enhanced protease sensitivity suggestive of structural loosening; and nonnative disulfide-linked oligomer and multimer formation. Expression of G127X and G85R in mouse cell lines did not induce misfolding of murine wtSOD1, and a species restriction element for human wtSOD1 conversion was mapped to a region of sequence divergence in loop II and β-strand 3 of the SOD1 β-barrel (residues 24-36), then further refined surprisingly to a single tryptophan residue at codon 32 (W32) in human SOD1. Time course experiments enabled by W32 restriction revealed that G127X and misfolded wtSOD1 can induce misfolding of cell-endogenous wtSOD1. Finally, aggregated recombinant G127X is capable of inducing misfolding and protease sensitivity of recombinant human wtSOD1 in a cell-free system containing reducing and chelating agents; cell-free wtSOD1 conversion was also restricted by W32. These observations demonstrate that misfolded SOD1 can induce misfolding of natively structured wtSOD1 in a physiological intracellular milieu, consistent with a direct protein-protein interaction.

Functionalities which may be genetically programmed into a bacterium are limited by its range of possible activities and its sensory capabilities. Therefore, enhancing the bacterial sensory repertoire is a crucial step for expanded utility in potential biomedical, industrial or environmental applications. Using microarray and qRT-PCR analyses, we have investigated transcription in E. coli (strain CSH50) following FimH-mediated adhesion to biocompatible substrates. Specifically, wild-type FimH-mediated adhesion of E. coli to mannose agarose beads and His-tagged FimH-mediated adhesion to Ni(2+)-NTA beads both led to induction of ahpCF, dps, grxA and marRAB genes among bound cells relative to unbound cells. The strongly-induced genes are known to be regulated by OxyR or SoxS cytoplasmic redox sensors. Some differentially altered genes also overlapped with those implicated in biofilm formation. This study provides an insight into transcriptional events following FimH-mediated adhesion and may provide a platform for elucidation of the signaling circuit necessary for engineering a synthetic attachment response in E. coli.

The NMR structure of the N-terminal, DnaJ-like domain of murine polyomavirus tumor antigens (PyJ) has been determined to high precision, with root mean square deviations to the mean structure of 0.38 A for backbone atoms and 0.94 A for all heavy atoms of ordered residues 5-41 and 50-69. PyJ possesses a three-helix fold, in which anti-parallel helices II and III are bridged by helix I, similar to the four-helix fold of the J domains of DnaJ and human DnaJ-1. PyJ differs significantly in the lengths of N terminus, helix I, and helix III. The universally conserved HPD motif appears to form a His-Pro C-cap of helix II. Helix I features a stabilizing Schellman C-cap that is probably conserved universally among J domains. On the helix II surface where positive charges of other J domains have been implicated in binding of hsp70s, PyJ contains glutamine residues. Nonetheless, chimeras that replace the J domain of DnaJ with PyJ function like wild-type DnaJ in promoting growth of Escherichia coli. This activity can be modulated by mutations of at least one of these glutamines. T antigen mutations reported to impair cellular transformation by the virus, presumably via interactions with PP2A, cluster in the hydrophobic folding core and at the extreme N terminus, remote from the HPD loop.