Search

The non-collisional subduction margin of South America is characterized by different geometries of the subduction zone and upper-plate tectono-magmatic provinces. The localization of deformation in the southern Central Andes (29°S–39°S) has been attributed to numerous factors that combine the properties of the subducting oceanic Nazca plate and the continental South American plate. In this study, the present-day configuration of the subducting oceanic plate and the continental upper plate were integrated in a data-driven geodynamic workflow to assess their role in determining strain localization within the upper plate of the flat slab and its southward transition to a steeper segment. The model predicts two fundamental processes that drive deformation in the Andean orogen and its foreland: eastward propagation of deformation in the flat-slab segment by a combined bulldozing mechanism and pure-shear shortening that affects the broken foreland and simple-shear shortening in the fold-and-thrust belt of the orogen above the steep slab segment. The transition between the steep and subhorizontal subduction segments is characterized by a 370-km-wide area of diffuse shear, where deformation transitions from pure to simple shear, resembling the transition from thick to thin-skinned foreland deformation in the southern Sierras Pampeanas. This pattern is controlled by the change in dip geometry of the Nazca plate and the presence of mechanically weak sedimentary basins and inherited faults.

Deformation in the orogen-foreland system of the southern Central Andes between 33° and 36° S varies in style, locus, and amount of shortening. The controls that determine these spatially variable characteristics have largely remained unknown, yet both the subduction of the oceanic Nazca plate and the strength of the South American plate have been invoked to play a major role. While the parameters governing the subduction processes are similar between 33° and 36° S, the lithospheric strength of the upper plate is spatially variable due to structures inherited from past geodynamic regimes and associated compositional differences in the South American plate. Regional Mesozoic crustal horizontal extension generated a < 40-km-thick crust with a more mafic composition in the lower crust south of 35°S; north of this latitude, however, a more felsic lower crust is inferred from geophysical data. To assess the influence of different structural and compositional heterogeneities on the style of deformation in the southern Central Andes, we developed a suite of geodynamic models of intraplate lithospheric shortening for two E–W transects (33° 40′ S and 36° S) across the Andes. The models are constrained by local geological and geophysical information. Our results demonstrate a decoupled shortening mode between the brittle upper crust and the ductile lower crust in those areas characterized by a mafic lower crust (36° S transect). In contrast, a more felsic lower crust, such as in the 33° 40′ S transect, results in a coupled shortening mode. Furthermore, we find that differences in lithospheric thickness and the asymmetry of the lithosphere–asthenosphere boundary may promote the formation of a crustal-scale, west-dipping detachment zone that drives the overall deformation and lateral expansion of the orogen. Our study represents the first geodynamic modeling effort in the southern Central Andes aimed at understanding the roles of heterogeneities (crustal composition and thickness) at the scale of the entire lithosphere as well as the geometry of the lithosphere–asthenosphere boundary with respect to mountain building. Fil: Barrionuevo, Matías. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mendoza. Instituto Argentino de Nivología, Glaciología y Ciencias Ambientales. Provincia de Mendoza. Instituto Argentino de Nivología, Glaciología y Ciencias Ambientales. Universidad Nacional de Cuyo. Instituto Argentino de Nivología, Glaciología y Ciencias Ambientales; Argentina Fil: Liu, Sibiao. Universitat Potsdam; Alemania Fil: Mescua, Jose Francisco. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mendoza. Instituto Argentino de Nivología, Glaciología y Ciencias Ambientales. Provincia de Mendoza. Instituto Argentino de Nivología, Glaciología y Ciencias Ambientales. Universidad Nacional de Cuyo. Instituto Argentino de Nivología, Glaciología y Ciencias Ambientales; Argentina Fil: Yagupsky, Daniel Leonardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Estudios Andinos "Don Pablo Groeber". Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Estudios Andinos "Don Pablo Groeber"; Argentina Fil: Quinteros, Javier. German Research Centre for Geosciences; Alemania Fil: Giambiagi, Laura Beatriz. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mendoza. Instituto Argentino de Nivología, Glaciología y Ciencias Ambientales. Provincia de Mendoza. Instituto Argentino de Nivología, Glaciología y Ciencias Ambientales. Universidad Nacional de Cuyo. Instituto Argentino de Nivología, Glaciología y Ciencias Ambientales; Argentina Fil: Sobolev, Stephan V.. Universitat Potsdam; Alemania Fil: Piceda, Constanza Rodríguez. Universitat Potsdam; Alemania Fil: Strecker, Manfred R.. German Research Centre for Geosciences; Alemania

The formation of the Central Andes dates back to ∼50 Ma, but its most pronounced episode, including the growth of the Altiplano-Puna Plateau and pulsatile tectonic shortening phases, occurred within the last 25 Ma. The reason for this evolution remains unexplained. Using geodynamic numerical modeling we infer that the primary cause of the pulses of tectonic shortening and growth of the Central Andes is the changing geometry of the subducted Nazca plate, and particularly the steepening of the mid-mantle slab segment which results in a slowing down of the trench retreat and subsequent increase in shortening of the advancing South America plate. This steepening first happens after the end of the flat slab episode at ∼25 Ma, and later during the buckling and stagnation of the slab in the mantle transition zone. Processes that mechanically weaken the lithosphere of the South America plate, as suggested in previous studies, enhance the intensity of the shortening events. These processes include delamination of the mantle lithosphere and weakening of foreland sediments. Our new modeling results are consistent with the timing and amplitude of the deformation from geological data in the Central Andes at the Altiplano latitude., Journal of Geophysical Research: Solid Earth, 127 (12), ISSN:2169-9313, ISSN:0148-0227, ISSN:2169-9356

The formation of the Central Andes dates back to ~50 Ma, but its most pronounced phase, including the growth of the Altiplano-Puna Plateau and pulsatile tectonic shortening phases, occurred within the last 25 Ma. The reason for this evolution remains unexplained. Using geodynamic numerical modeling we infer that the primary cause of the pulses of tectonic shortening and growth of Central Andes is the changing geometry of the subducted Nazca plate, and particularly the steepening of the mid-mantle slab segment which results in a slowing down of the trench retreat and subsequent shortening of the advancing South America plate. This steepening first happens after the end of the flat slab episode at ~25 Ma, and later during the buckling and stagnation of the slab in the mantle transition zone. The Intensity of the shortening events is enhanced by the processes that mechanically weaken the lithosphere of the South America plate, which were suggested in previous studies. These processes include delamination of the mantle lithosphere and weakening of the foreland sediments. Our new modeling results are consistent with the timing and amplitude of the deformation from geological data in the Central Andes at the Altiplano latitude.

Controls on the deformation pattern (shortening mode and tectonic style) of orogenic forelands during tectonic shortening remain poorly understood. Here, we use high-resolution 2D thermomechanical ...

It has recently been demonstrated that the interaction of a mantle plume with sufficiently old oceanic lithosphere can initiate subduction. However, the existence of large lithospheric heterogeneities, such as a buoyant plateau, in proximity to a rising plume head may potentially hinder the formation of a new subduction zone. Here, we investigate this scenario by means of 3‐D numerical thermomechanical modeling. We explore how plume‐lithosphere interaction is affected by lithospheric age, relative location of plume head and plateau border, and the strength of the oceanic crust. Our numerical experiments suggest four different geodynamic regimes: (a) oceanic trench formation, (b) circular oceanic‐plateau trench formation, (c) plateau trench formation, and (d) no trench formation. We show that regardless of the age and crustal strength of the oceanic lithosphere, subduction can initiate when the plume head is either below the plateau border or at a distance less than the plume radius from the plateau edge. Crustal heterogeneity facilitates subduction initiation of old oceanic lithosphere. High crustal strength hampers the formation of a new subduction zone when the plume head is located below a young lithosphere containing a thick and strong plateau. We suggest that plume‐plateau interaction in the western margin of the Caribbean could have resulted in subduction initiation when the plume head impinged onto the oceanic lithosphere close to the border between plateau and oceanic crust., Geochemistry, Geophysics, Geosystems, 21 (8), ISSN:1525-2027

The classical Wilson Cycle concept, describing repeated opening and closing of ocean basins, hypothesizes spontaneous conversion of passive continental margins into subduction zones. This process, however, is impeded by the high strength of passive margins, and it has never occurred in Cenozoic times. Here using thermomechanical models, we show that additional forcing, provided by mantle flow, which is induced by neighboring subduction zones and midmantle slab remnants, can convert a passive margin into a subduction zone. Models suggest that this is a long-term process, thus explaining the lack of Cenozoic examples. We speculate that new subduction zones may form in the next few tens of millions of years along the Argentine passive margin and the U.S. East Coast. Mantle suction force can similarly trigger subduction initiation along large oceanic fracture zones. We propose that new subduction zones will preferentially originate where subduction zones were active in the past, thus explaining the remarkable colocation of subduction zones during at least the last 400 Myr.

Subduction is substantially multi-scale process where the stresses are built by long-term tectonic motions, modified by sudden jerky deformations during earthquakes, and then restored by following multiple relaxation processes. Here, we develop a cross-scale thermomechanical model aimed to simulate the subduction process from 1 minute to million years' time scale. The model employs elasticity, nonlinear transient viscous rheology, and rate-and-state friction. It generates spontaneous earthquake sequences and by using an adaptive time-step algorithm, recreates the deformation process as observed naturally during the seismic cycle and multiple seismic cycles. The model predicts that viscosity in the mantle wedge drops by more than three orders of magnitude during the great earthquake with a magnitude above 9. As a result, the surface velocities just an hour or day after the earthquake are controlled by viscoelastic relaxation in the several hundred km of mantle landward of the trench and not by the afterslip localized at the fault as is currently believed. Our model replicates centuries-long seismic cycles exhibited by the greatest earthquakes and is consistent with the postseismic surface displacements recorded after the Great Tohoku Earthquake. We demonstrate that there is no contradiction between extremely low mechanical coupling at the subduction megathrust in South Chile inferred from long-term geodynamic models and appearance of the largest earthquakes, like the Great Chile 1960 Earthquake.

Plate tectonics is among the most important geological processes on Earth, but its emergence and evolution remain unclear. Here we extrapolate models of present-day plate tectonics to the past and propose that since about three billion years ago the rise of continents and the accumulation of sediments at continental edges and in trenches has provided lubrication for the stabilization of subduction and has been crucial in the development of plate tectonics on Earth. We conclude that the two largest surface erosion and subduction lubrication events occurred after the Palaeoproterozoic Huronian global glaciations (2.45 to 2.2 billion years ago), leading to the formation of the Columbia supercontinent, and after the Neoproterozoic 'snowball' Earth glaciations (0.75 to 0.63 billion years ago). The snowball Earth event followed the 'boring billion'-a period of reduced plate tectonic activity about 1.75 to 0.75 billion years ago that was probably caused by a shortfall of sediments in trenches-and it kick-started the modern episode of active plate tectonics.

Pre-existing weakness zones in the lithosphere such as transform faults/fracture zones and extinct mid-oceanic ridges have been suggested to facilitate subduction initiation in an intra-oceanic environment. Here, we propose that the additional forcing coming from the mantle suction flow is required to trigger the conversion of a fracture zone/transform fault into a converging plate boundary. This suction flow can be induced either from the slab remnants of former converging plate boundaries or/and from slabs of neighbouring active subduction zones. Using 2-D coupled thermo-mechanical models, we show that a sufficiently strong mantle flow is able to convert a fracture zone/transform fault into a subduction zone. However, this process is feasible only if the fracture zone/transform fault is very close to the mid-oceanic ridge. Our numerical model results indicate that time of subduction initiation depends on the velocity, domain size and location of mantle suction flow and age of the oceanic plate.

The orientation and tectonic regime of the observed crustal/lithospheric stress field contribute to our knowledge of different deformation processes occurring within the Earth's crust and lithosphere. In this study, we analyze the influence of the thermal and density structure of the upper mantle on the lithospheric stress field and topography. We use a 3D lithosphere-asthenosphere numerical model with power-law rheology, coupled to a spectral mantle flow code at 300 km depth. Our results are validated against the World Stress Map 2016 and the observation-based residual topography. We derive the upper mantle thermal structure from either a heat flow model combined with a sea floor age model (TM1) or a global S-wave velocity model (TM2). We show that lateral density heterogeneities in the upper 300 km have a limited influence on the modeled horizontal stress field as opposed to the resulting dynamic topography that appears more sensitive to such heterogeneities. There is hardly any difference between the stress orientation patterns predicted with and without consideration of the heterogeneities in the upper mantle density structure across North America, Australia, and North Africa. In contrast, we find that the dynamic topography is to a greater extent controlled by the upper mantle density structure. After correction for the chemical depletion of continents, the TM2 model leads to a much better fit with the observed residual topography giving a correlation of 0.51 in continents, but this correction leads to no significant improvement in the resulting lithosphere stresses. In continental regions with abundant heat flow data such as, for instant, Western Europe, TM1 results in relatively a small angular misfits of 18.30° between the modeled and observation-based stress field compared 19.90° resulting from modeled lithosphere stress with s-wave based model TM2.

We study segregation of the subducted oceanic crust (OC) at the core-mantle boundary and its ability to accumulate and form large thermochemical piles (such as the seismically observed Large Low Shear Velocity Provinces (LLSVPs)). Our high-resolution numerical simulations of thermochemical mantle convection suggest that the longevity of LLSVPs for up to three billion years, and possibly longer, can be ensured by a balance in the rate of segregation of high-density OC material to the core-mantle boundary (CMB) and the rate of its entrainment away from the CMB by mantle upwellings. For a range of parameters tested in this study, a large-scale compositional anomaly forms at the CMB, similar in shape and size to the LLSVPs. Neutrally buoyant thermochemical piles formed by mechanical stirring—where thermally induced negative density anomaly is balanced by the presence of a fraction of dense anomalous material—best resemble the geometry of LLSVPs. Such neutrally buoyant piles tend to emerge and survive for at least 3 Gyr in simulations with quite different parameters. We conclude that for a plausible range of values of density anomaly of OC material in the lower mantle—it is likely that it segregates to the CMB, gets mechanically mixed with the ambient material, and forms neutrally buoyant large-scale compositional anomalies similar in shape to the LLSVPs.

An inclined zone of intermediate-depth seismicity beneath the Pamir orogen in Central Asia has been interpreted as southward subduction of a slab of Asian lithosphere. However, it is not known whether Asian lithosphere subducts intact or only partially. We used arrival times of shallow and intermediate-depth earthquakes, recorded with a temporary (2008–2010) seismic network in this region, to invert for 3D models of seismic velocities in an attempt to answer this question. With local seismicity reaching depths of up to 240 km, the deep structure of the Pamir could be illuminated with high resolution. The resulting velocity models show a north–south contrast in crustal seismic velocities in the Pamir, with very low P velocities (5.7–5.9 km/s at 15–30 km depth), coupled with relatively low vp/vsvp/vs (

The arrival of a plume head at Earth's continental lithosphere is often considered to be an important factor for continental break-up. However, the impact of plume impingement on strength and duration of a rift remains unclear. In this study, we quantify the mechanical and thermal influence of a plume (i.e. lithosphere erosion) on continental break-up. To do that we apply the three-dimensional numerical code SLIM3D that features realistic elasto-visco-plastic rheology. We model the thermo-mechanical response of a segment of Earth's lithosphere that is affected both by extension as well as plume-related lithosphere erosion in order to evaluate the influence on the overall force budget. We find that lithosphere erosion leads to a moderate lithospheric strength reduction of several TN/m. In a force-limited environment, however, this strength reduction may have strong influence on the timing of continental break-up, or it may even control whether continental break-up takes place at all. Additional reduction of the lithospheric strength is likely due to the massive emplacement of dikes that follows intensive melting within the plume head.

Here, we study the 3-D subduction initiation process induced by the interaction between a hot thermochemical mantle plume and oceanic lithosphere using thermo-mechanical viscoplastic finite difference marker-in-cell models. Our numerical modeling results show that self-sustaining subduction is induced by plume-lithosphere interaction when the plume is sufficiently buoyant, the oceanic lithosphere is sufficiently old and the plate is weak enough to allow the buoyant plume to. pass through it. Subduction initiation occurs following penetration of the lithosphere by the hot plume and the downward displacement of broken, nearly circular segments of lithosphere (proto-slabs) as a result of partially molten plume rocks overriding the proto-slabs. Our experiments show four different deformation regimes in response to plume-lithosphere interaction: a) self-sustaining subduction initiation, in which subduction becomes self-sustaining; b) frozen subduction initiation, in which subduction stops at shallow depths; c) slab break-off, in which the subducting circular slab breaks off soon after formation; and d) plume underplating, in which the plume does not pass through the lithosphere and instead spreads beneath it (i.e., failed subduction initiation). These regimes depend on several parameters, such as the size, composition, and temperature of the plume, the brittle/plastic strength and age of the oceanic lithosphere, and the presence/absence of lithospheric heterogeneities. The results show that subduction initiates and becomes self-sustaining when the lithosphere is older than 10 Myr and the non dimensional ratio of the plume buoyancy force and lithospheric strength above the plume is higher than approximately 2. The outcomes of our numerical experiments are applicable for subduction initiation in the modern and Precambrian Earth and for the origin of plume-related corona structures on Venus. (C) 2016 Elsevier B.V. All rights reserved.

We present the GITEWS approach to source modeling for the tsunami early warning in Indonesia. Near-field tsunami implies special requirements to both warning time and details of source characterization. To meet these requirements, we employ geophysical and geological information to predefine a maximum number of rupture parameters. We discretize the tsunamigenic Sunda plate interface into an ordered grid of patches (150×25) and employ the concept of Green's functions for forward and inverse rupture modeling. Rupture Generator, a forward modeling tool, additionally employs different scaling laws and slip shape functions to construct physically reasonable source models using basic seismic information only (magnitude and epicenter location). GITEWS runs a library of semi- and fully-synthetic scenarios to be extensively employed by system testing as well as by warning center personnel teaching and training. Near real-time GPS observations are a very valuable complement to the local tsunami warning system. Their inversion provides quick (within a few minutes on an event) estimation of the earthquake magnitude, rupture position and, in case of sufficient station coverage, details of slip distribution.

The Indonesian archipelago is known for the occurrence of catastrophic earthquake-generated tsunamis along the Sunda Arc. The tsunami hazard associated with submarine landslides however has not been fully addressed. In this paper, we compile the known tsunamigenic events where landslide involvement is certain and summarize the properties of published landslides that were identified with geophysical methods. We depict novel mass movements, found in newly available bathymetry, and determine their key parameters. Using numerical modeling, we compute possible tsunami scenarios. Furthermore, we propose a way of identifying landslide tsunamis using an array of few buoys with bottom pressure units.

Our analysis of new bathymetric data reveals six submarine landslides at the eastern Sunda margin between central Java and Sumba Island, Indonesia. Their volumes range between 1 km³ in the Java fore-arc basin up to 20 km³ at the trench off Sumba and Sumbawa. We estimate the potential hazard of each event by modeling the corresponding tsunami and its run-up on nearby coasts. Four slides are situated remarkably close to the epicenter of the 1977 tsunamigenic Sumba M w = 8.3 earthquake. However, comparison of documented tsunami run-up heights and arrival times with our modeling results neither allows us to confirm nor can we falsify the hypothesis that the earthquake triggered these submarine landslides.

Pull-apart basins are depressions that form as the result of crustal extension along strike-slip systems where the sense of fault stepping or bending coincides with that of fault slip. They are common features of strike-slip systems. We perform a number of numerical thermomechanical experiments to explore how the rheology of the lithosphere influences basin evolution and lithospheric structure beneath the basin. Our modeling shows that basin subsidence results from the competition of extension of the brittle part of the lithosphere, which leads to its subsidence, and of the compensating flow of the deeper ductile part of the lithosphere, which pushes the extended brittle block upwards. The result of this competition is the subsidence rate. Strain partitioning beneath the basin and crustal structures is controlled by (i) the thickness of the brittle layer and basin width, (ii) the magnitude of strike-slip displacement, (iii) the rate of frictional softening of the crust, and (iv) the viscosity of the ductile part of the lithosphere. The thickness of the brittle layer and the viscosity of the underlying ductile part of the lithosphere in turn depend on temperature, composition and material softening. We interpret the modeling results, deducing simple analytical expressions based on the “brittle brick stretching” (BBS) approach, which despite its simplicity describes the structure and evolution of pull-apart basins reasonably well. We also demonstrate that the structure and evolution of the Dead Sea Basin, located at a left step of the Dead Sea Transform in the Middle East, is consistent with a BBS type of deformation with only a minor contribution from compensational flow in the ductile part of the lithosphere. Finally, we show that the formation of a deep narrow pull-apart basin in relatively cold lithosphere, as in the Dead Sea Basin, requires very low friction at major faults (lower than 0.1–0.2). If this condition is not satisfied, strike-slip deformation does not localise and deep basins do not form.

High-resolution three-dimensional thermomechanical simulations of Earth's lithosphere indicate that mantle plumes could have initiated the first subduction zones, but only in the hotter early Earth for old oceanic plates. Taras Gerya and co-authors use high-resolution three-dimensional numerical thermomechanical models to show that mantle plumes could have initiated the first subduction zones. They find that several factors combine to trigger self-sustained subduction: a strong, negatively buoyant oceanic lithosphere, focused magmatic weakening and thinning of lithosphere above the plume, and lubrication of the slab interface by hydrated crust. They also conclude that plume-induced subduction was only feasible in the hotter early Earth for old oceanic plates, as younger plates would have favoured episodic lithospheric drips rather than self-sustained subduction and global plate tectonics. Scientific theories of how subduction and plate tectonics began on Earth—and what the tectonic structure of Earth was before this—remain enigmatic and contentious1. Understanding viable scenarios for the onset of subduction and plate tectonics2,3 is hampered by the fact that subduction initiation processes must have been markedly different before the onset of global plate tectonics because most present-day subduction initiation mechanisms require acting plate forces and existing zones of lithospheric weakness, which are both consequences of plate tectonics4. However, plume-induced subduction initiation5,6,7,8,9 could have started the first subduction zone without the help of plate tectonics. Here, we test this mechanism using high-resolution three-dimensional numerical thermomechanical modelling. We demonstrate that three key physical factors combine to trigger self-sustained subduction: (1) a strong, negatively buoyant oceanic lithosphere; (2) focused magmatic weakening and thinning of lithosphere above the plume; and (3) lubrication of the slab interface by hydrated crust. We also show that plume-induced subduction could only have been feasible in the hotter early Earth for old oceanic plates. In contrast, younger plates favoured episodic lithospheric drips rather than self-sustained subduction and global plate tectonics.

SUMMARY ∼82 000 P and S arrival times from ∼3000 sources recorded by ∼250 seismic stations from the revised ISC catalogue are employed to study a circular area of 6 ◦ radius centred on the Dead Sea. We use the linearized tomographic approach based on the rays constructed in a 1-D spherical velocity model and corrected for the Moho depth variation and relief. All the sources were relocated. As the result of simultaneous iterative inversion we get 3-D P and S velocity anomalies in the crust and uppermost mantle, Moho depth and corrected source parameters. The resulting images fit well with the existing tectonic elements in the study area. In the crust, a narrow P and S low-velocity anomaly marks the position of the Dead Sea Transform (DST) that is interpreted as sediments in the shallower layer and a zone of fractured and deformed rocks in the middle and lower crust. There is a narrow (50 km wide) band of thickening of the crust along the DST in the Arava valley between the Red Sea and Dead Sea and some 100 km north of the Dead Sea. This zone may be associated with the minimum of the lithospheric strength and, therefore, explain the location of the DST in the Arava Valley. The velocity anomalies under the crust and the map of the Moho depth clearly distinguish the oceanic (Levant basin) and continental types of crust (Asia Minor, Zagros, Cyprus and Eratosthenes Mount). Verification of the results takes an important part in this study. Inversions of different starting models and independent processing of data subsets show high robustness of the results. Synthetic tests clearly show the limits of the resolving power of the inversion with the existing data set.

The Earth's biggest magmatic events are believed to originate from massive melting when hot mantle plumes rising from the lowermost mantle reach the base of the lithosphere. Classical models predict large plume heads that cause kilometre-scale surface uplift, and narrow (100 km radius) plume tails that remain in the mantle after the plume head spreads below the lithosphere. However, in many cases, such uplifts and narrow plume tails are not observed. Here using numerical models, we show that the issue can be resolved if major mantle plumes contain up to 15–20% of recycled oceanic crust in a form of dense eclogite, which drastically decreases their buoyancy and makes it depth dependent. We demonstrate that, despite their low buoyancy, large enough thermochemical plumes can rise through the whole mantle causing only negligible surface uplift. Their tails are bulky (>200 km radius) and remain in the upper mantle for 100 millions of years., The classic mantle plume concept explains large igneous provinces and hotspot magmatism, but often contradicts observed surface uplift and plume morphology. Here, the authors present a plume model that better supports observations by considering low-buoyancy plumes containing up to 15% of recycled oceanic crust.

Since the late Miocene, the two main segments of the central Andean high plateau, Altiplano and Puna, demonstrate different styles and magnitudes of tectonic shortening. Through numerical simulation of thermomechanical processes, we show that different shortening modes—pure and simple shear accompanied by thin-or thick-skinned tectonics—might be controlled by strength of the foreland uppermost crust and by temperature of the foreland lithosphere. Mechanical weakening and failure of the thick Paleozoic sediments overlying the cold lithosphere in the Altiplano foreland at 13–9 Ma explains the transition from pure to simple shear shortening accompanied by broad thin-skinned thrusting, started before the major uplift of the plateau. However, the high strength of the uppermost crust combined with a relatively warm lithosphere results in the thick-skinned shortening typical for the foreland of the Puna. Failure of Paleozoic sediments in the Altiplano foreland significantly reduces the force required to shorten the lithosphere, which may be the reason for the increased bulk shortening rate in the late Miocene.

More than 50 per cent of the Earth´s upper mantle consists of olivine and it is generally thought that mantle-derived melts are generated in equilibrium with this mineral. Here, however, we show that the unusually high nickel and silicon contents of most parental Hawaiian magmas are inconsistent with a deep olivine-bearing source, because this mineral together with pyroxene buffers both nickel and silicon at lower levels. This can be resolved if the olivine of the mantle peridotite is consumend by reaction with melts derived from rexycled oceanic crust, to form a secondary pyroxenitic source. Our modelling shows that more than half of Hawaiian magmas formed during the past 1 Myr came from this source. In addition, we estimate that the proportion of recycled (oceanic) crust varies from 30 per cent near the plume centre to insignificant levels at the plume edge. These results are also consistent with volcano volumes, magma volume flux and seismological observations.

In this chapter we report on the deep structure of the Dead Sea Transform (DST) as derived from geophysical observations and numerical modelling, calibrated by geological and geodynamic evidence.

The classic example of the not-well-understood rapid change of tectonic plate motion is the increase and then decrease of the convergence rate between the Nazca and South America plates during the past 25–20 m.y. that coincided with the growth of the Andes Mountains. Currently, the decrease in convergence rate is explained either by the increasing load of the Andes or by the appearance of flat slab segments beneath South America. Here, we present an alternative view based on a thermomechanical self-consistent (gravity driven) model of Nazca plate subduction. We explain the changes in the convergence rate as a natural consequence of the Nazca plate penetration into the transition zone and lower mantle after long-term oblique subduction of the Farallon plate. The model is consistent with seismic tomographic images of the Nazca plate beneath South America. Our model also shows that the presence of the Andes does not significantly affect the convergence rate between the Nazca and South America plates.

The 1989 VSP program at the KTB pilot hole was complemented in 1992 by a standard VSP in the KTB super-deep borehole from 3000 to 6013 m. P-wave velocities oscillate around 5.8 km/s in the upper 3150 m in accordance with sonic log velocities and correlate with paragneisses which prevail in this depth range. At about 3150 m depth, velocities increase to 6.4 km/s correlating with metabasites which dominate in the depth range 3150 to 7500 m. Laboratory measurements and petrophysical modelling provide evidence that the intrinsic velocities were reduced by 5–10% by fracture density and porosity at all depth ranges. Subvertical dip (50–70°) in structures and textures prevail, causing about 10% S-wave anisotropy, indicated by direct observations of S-wave splitting. Pronounced P-wave reflections, accompanied by P- to S-wave conversions and a lack of S-wave reflections, occur in the lower depth range only (3000–6000 m) and correlate with fluid-filled fracture systems. Lithological contrasts (gneiss-amphibolite) play a minor role in generating reflections. The most prominent reflecting elements known from surface profiling and 3D-surveys (i.e. the ‘Franconian Lineament’ reflector at about 7 km, and P-wave reflections at 8.3 km with notably absent associated S-wave reflections) coincide with pronounced anomalies observed in the logging data indicating the presence of major fracture zones.

A new technique for interpretation of 3-D seismic tomographic models in terms of temperature, degree of partial melt and rock composition is presented and tested. We consider both anharmonic and anelastic temperature effects on seismic velocities as well as the effects of mineral reactions, composition and partial melt. It is shown that composition effect is small (less than 1% of velocity) if there are no strongly depleted, Mg-rich harzburgites. We calculate anharmonic temperature derivatives of seismic velocities from compositions of mantle xenoliths. The parameters of a non-linear frequency and temperature-dependent model of attenuation have been taken from published laboratory experiments and calibrated using global Q observations in the upper mantle. For every block of the tomographic model we calculate the absolute temperature and melt fraction required to fit the observed V p perturbation, the average temperature of the tomographic layer being constrained by the observed surface heat flow. With these temperatures we calculate attenuation, density, V p and V s from petrophysical modelling, using the average for 80 mantle xenoliths samples from the French Massif Central. The technique is applied to a recently published 3-D teleseismic P wave tomographic model of the upper mantle beneath the French Massif Central. The observed velocity perturbations are probably caused there by variations in temperature. Temperature does not reach the dry solidus temperature (except for a few tomographic blocks), although it comes close to it at the depth of 60–100 km below volcanic areas. At high subsolidus temperatures the contribution of anelasticity to velocity perturbations is at least as important as the combined effect of anharmonicity and mineral reactions. Our model is consistent with the Pn velocities from refraction seismic studies, Q S estimations from surface waves, observed gravity, geoid, topography and surface heat flow, as well as with the composition and temperatures derived from mantle xenoliths. We suggest that the lithosphere-asthenosphere boundary is uplifted to 50–60 km depth beneath the main volcanic fields. The central and southern part of the Massif Central is underlain by the hot mantle body (plume?) with a potential temperature that is 100–200°C higher than the average potential temperature of the upper mantle.

[1] In many cases the initial stage of continental break-up was and is associated with oblique rifting. That includes break-up in the Southern and Equatorial Atlantic, separation from eastern and western Gondwana as well as many recent rift systems, like Gulf of California, Ethiopia Rift and Dead Sea fault. Using a simple analytic mechanical model and advanced numerical, thermomechanical modeling techniques we investigate the influence of oblique extension on the required tectonic force in a three-dimensional setting. While magmatic processes have been already suggested to affect rift evolution, we show that additional mechanisms emerge due to the three-dimensionality of an extensional system. Focusing on non-magmatic rift settings, we find that oblique extension significantly facilitates the rift process. This is due to the fact that oblique deformation requires less force in order to reach the plastic yield limit than rift-perpendicular extension. The model shows that in the case of two competing non-magmatic rifts, with one perpendicular and one oblique to the direction of extension but otherwise having identical properties, the oblique rift zone is mechanically preferred and thus attracts more strain.

[1] We present a three-dimensional finite element thermomechanical model idealizing the complex deformation processes associated with evolution of the San Andreas Fault system (SAFS) in northern and central California over the past 20 Myr. More specifically, we investigate the mechanisms responsible for the eastward (landward) migrationof the San Andreas plate boundary over time, a process thathas largely determined the evolution and present structure of SAFS. Two possible mechanisms had been previously suggested. One mechanism suggests that the Pacific plate first cools and captures uprising mantle in the slab window, subsequently causing accretion of the continental crustal blocks. An alternative scenario attributes accretion to the capture of plate fragments (microplates) stalled in the ceased Farallon-North America subduction zone. Here we test both these scenarios numerically using a recently developed lithospheric-scale code, SLIM3D, that employs free surface, nonlinear temperature- and stress-dependent elastoviscoplastic rheology and allows for self-generation of faults. Modeling suggests that microplate capture is the primary driving mechanism fortheeastwardmigrationoftheplateboundary,whiletheslabwindowcoolingmechanismaloneisincapable of explaining this phenomenon. We also show that the system evolves to the present day structure of SAFS only if the coefficient of friction at mature faults is low (0.08 for the best fit model). Thus, our model provides an independent constraint supporting the “weak fault in a strong crust” hypothesis for SAFS.

[1] The Dead Sea Transform (DST) comprises a boundary between the African and Arabian plates. During the last 15–20 m.y. more than 100 km of left lateral transform displacement has been accumulated on the DST and about 10 km thick Dead Sea Basin (DSB) was formed in the central part of the DST. Widespread igneous activity since some 20 Ma ago and especially in the last 5 m.y., thin (60–80 km) lithosphere constrained by seismic data and absence of seismicity below the Moho, seem to be quite natural for this tectonically active plate boundary. However, surface heat flow values of less than 50–60 mW/m2 and deep seismicity in the lower crust (deeper than 20 km) reported for this region are apparently inconsistent with the tectonic settings specific for an active continental plate boundary and with the crustal structure of the DSB. To address these inconsistencies which comprise what we call the “DST heat-flow paradox,” we have developed a numerical model that assumes an erosion of initially thick and cold lithosphere just before or during the active faulting at the DST. The optimal initial conditions for the model are defined using transient thermal analysis. From the results of our numerical experiments we conclude that the entire set of observations for the DSB can be explained within the classical pull-apart model assuming that the lithosphere has been thermally eroded at about 20 Ma and the uppermost mantle in the region have relatively weak rheology consistent with experimental data for wet olivine or pyroxenite.