Search

This paper analyzes the real-world experience of using Bicycle traffic as a new way of supporting logistics traffic and reducing the load on the transport network of cities. As a result of this research, it was found that the real-world experience yields positive results and that cycling is actively becoming common in most of the world's cities. In the Russian Federation, not much attention has been paid to this in comparison with other countries; nevertheless, in recent years, this has been actively pursued. Research of the transport system supporting the city Stary Oskol of the Belgorod region and the Russian Federation allowed the authors to determine the main strategies for the development of a comprehensive and integrated Cycling network consisting of a Bikeway Plan as well as an economic assessment of its implementation. To justify this Bikeway plan, a simulation of travel time on public transport, calculation of the total travel time on various modes of transport and calculation of the walking time compared to the time spent in public transport were performed.

SBS (styrene-butadiene-styrene block copolymer) has been widely used in pavement industry as an asphalt modifier. Nanomaterials can further enhance the performance of SBS modified asphalt. However, rare studies investigate the feasibility of using graphene as a performance enhancer of SBS modified asphalt. To fill this gap, comprehensive experimental tests including chemical and mechanical test were carried out on SBS-graphene modified asphalt and SEBS (styrene-ethylene-butylene-styrene block copolymer, which is a hydrogenated polymer of SBS) modified asphalt. Graphene with different dimensions and contents was taken into consideration in this study. Based on the experimental work, it can be concluded that graphene improves the mid-temperature performance of SBS modified asphalt. Compared with two-dimensional graphene, three-dimensional graphene has a greater advantage and the enhancement effect increases with the increase of its dosage. In addition, the cross-linked structure of SBS-graphene composite improves the distribution of SBS in asphalt, which improves the overall performance of SBS modified asphalt.

The use of advanced anti-icing materials is important to ensure and maintain the maximum traffic capacity, decrease the accident rate on motor roads exposed to adverse weather conditions in winter. The primary issue in applying these materials deals with ensuring the required traffic safety, therefore, these materials should undergo diagnostics before they can be recommended for use, and, subsequently, the condition of motor roads should be assessed. The diagnostic information obtained allows for comprehensive assessment of road operating conditions representing the most important factor in evaluating road pavement safety, especially in winter. The study addresses the issue of providing the basis for application of anti-icing materials to ensure the required safety on roads in winter. The study is focuses on road pavement operating conditions in winter, and the potential of using the new-generation anti-icing Nordway material and sand-and-salt mixture traditionally used in Russia’s periphery. As a result, due to the use of the new-generation anti-icing material, primary indicators of traffic safety assurance in winter are established. A full-scale experiment using the material under study is performed, primary cohesive properties for the experimental section of the road pavement are determined. Data on the braking distance variance in winter are gathered. A comparative analysis is carried out for a similar data set when using the traditional material, when using the tested material (of new generation) and without applying any materials. The most efficient way to reduce the accident rate on roads in winter using one of the anti-icing materials studied is established.

The paper considers the problem of increasing the service life of road asphalt concrete coatings in conditions of year-round operation by road impregnating materials protection from the effects of climatic and operational factors. Objects of research are various domestic road impregnating materials. The subject of research is estimation methodology of road impregnating materials efficiency, modeling effects of the exposed asphalt during operation in the Central Federal District. The article proposes method of estimation of the impregnating materials resistance to different operational factors and consistent scheme of their impact on the object under study is proposed. We conducted comprehensive assessment of road impregnating materials and the effect of their influence on indicators of quality of asphalt concrete and proposed the mechanism of action to protect road impregnating materials.

In the modern world nanotechnologies are an integral part of successful and progressive development of all the areas of activity. Materials science is not an exception. The authors studied the method of nanomodification and its influence on the performance properties of polymer-modified binder (PMB) and asphalt concrete, produced on their basis. It is established that nanomodified PMB are less susceptible to aging, which is a consequence of the processes of peptization of asphalt-resin complexes (ARC) in the structure of the modified binder and the crosslinking with the polymer matrix. It is revealed that nanotubes (SWCN or MWCN) used as a modifier, act as crosslinking agent and the inhibitor of the aging process in a PMB. The influence of nanomodified PMB on strength and deformation properties of asphalt concrete is investigated. It was found out that the use of modified binder in the asphalt concrete mixtures enhances the water resistance of asphalt concrete, heat resistance and shear-resistance.