Search

This study investigates the degradation of six different types of absorbable surgical threads commonly used in clinical practice, focusing on their response to exposure to physiological fluids. The threads were subjected to hydrolytic and enzymatic degradation in physiological saline, bile, and pancreatic juice. Our findings demonstrate that bile and pancreatic juice, particularly when contaminated with bacterial strains such as Escherichia coli, Klebsiella spp., and Enterococcus faecalis, significantly accelerate the degradation process. Using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and tensile strength testing, we observed distinct differences in the chemical structure and mechanical integrity of the sutures. Principal component analysis (PCA) of the FTIR spectra revealed that PDS threads exhibited the highest resistance to degradation, maintaining their mechanical properties for a longer duration compared with Monocryl and Vicryl. These results highlight the critical role of thread selection in gastrointestinal surgeries, where prolonged exposure to bile and pancreatic juice can compromise the suture integrity and lead to postoperative complications. The insights gained from this study will contribute to improving the selection and application of absorbable threads in clinical settings. [ABSTRACT FROM AUTHOR]

Introduction: Endocrine disrupting chemicals (EDCs) as benzene phenolic derivatives being hydrophobic partition to organic matter in sludge/soil sediments and show slow degradation rate owing to poor bioavailability to microbes. Methods: In the present study, the potential of a versatile white rot fungal isolate S5 identified as Hypocrea lixii was monitored to degrade bisphenol A (BPA)/triclosan (TCS) under shake flask conditions with concomitant production of lipopeptide biosurfactant (BS) and plant growth promotion. Results: Sufficient growth of WRF for 5 days before supplementation of 50 ppm EDC (BPA/TCS) in set B showed an increase in degradation rates by 23% and 29% with corresponding increase in secretion of lignin-modifying enzymes compared to set A wherein almost 84% and 97% inhibition in fungal growth was observed when BPA/TCS were added at time of fungal inoculation. Further in set B, EDC concentration stimulated expression of laccase and lignin peroxidase (Lip) with 24.44 U/L of laccase and 281.69 U/L of Lip in 100 ppm BPA and 344 U/L Lip in 50 ppm TCS supplemented medium compared to their respective controls (without EDC). Biodegradation was also found to be correlated with lowering of surface tension from 57.02 mN/m (uninoculated control) to 44.16 mN/m in case of BPA and 38.49 mN/m in TCS, indicative of biosurfactant (BS) production. FTIR, GC-MS, and LC-ESI/MSMS confirmed the presence of surfactin lipopeptide isoforms. The WRF also displayed positive plant growth promoting traits as production of ammonia, indole acetic acid, siderophores, Zn solubilization, and 1-1-aminocyclopropane-1-carboxylate (ACC) deaminase activity, reflecting its soil restoration ability. Discussion: The combined traits of biosurfactant production, EDC degradation and plant growth promotion displayed by WRF will help in emulsifying the hydrophobic pollutants favoring their fast degradation along with restoration of contaminated soil in natural conditions. [ABSTRACT FROM AUTHOR]

Introduction: Exposure to endocrine disrupting chemicals (EDCs) can result in alterations of natural hormones in the body. The aim of this review article is to highlight the knowledge about EDCs and obesity. Methods: A scoping review of the electronic literature was performed using PubMed platform for studies on EDCs and obesity published between the years 2013–2023. A total of 10 systematic reviews and meta-analysis studies met our inclusion criteria on more prominent EDCs focusing mainly on bisphenols, including parabens, triclosan, and phthalates, and their association with obesity. Design: Scoping review. Results: EDCs, mostly bisphenols and phthalates, are related to health effects, while there is less information on the impact of parabens and triclosan. A series of negative physiological effects involving obesogenic, diabetogenic, carcinogenic, and inflammatory mechanisms as well as epigenetic and microbiota modulations was related to a prolonged EDCs exposure. A more profound research of particular pollutants is required to illuminate the accelerating effects of particular EDCs, mixtures or their metabolites on the mechanism of the development of obesity. Conclusion: Considering the characteristics of EDCs and the heterogeneity of studies, it is necessary to design specific studies of effect tracking and, in particular, education about daily preventive exposure to EDCs for the preservation of long-term public health. [ABSTRACT FROM AUTHOR]

Endocrine disruptors are molecules that can interfere with the proper functioning of the endocrine system and lead to harmful effects in living organisms. This review focuses on the impact of synthetic fragrances, which are commonly found in personal care and household products, on the endocrine system. The article discusses the different types of hormones in the body and how they interact with receptors to produce signals. It also explores how endocrine disruptors can interfere with hormone signaling and transport, leading to adverse effects in the body. This work underscores the crucial need for further research into the impact of synthetic fragrances on the endocrine system and the importance of using safer alternatives in personal care and household products. [ABSTRACT FROM AUTHOR]

Enterococcus faecalis and E. faecium are opportunistic pathogens commonly found in the microbiota of humans and other animals as well as in the environment. This article presents the results of antimicrobial susceptibility testing using phenotypic methods (broth microdilution and standardized disk diffusion) on selected clinical, food, and wastewater isolates of E. faecalis and E. faecium. The isolates were divided into subgroups based on their sensitivity to the following antibiotics: vancomycin (VAN) and ciprofloxacin (CIP), and biocides triclosan (TCL) and chlorhexidine (CHX). The study also investigated in vitro virulence factors, including biofilm formation ability, cell surface hydrophobicity (CSH) and β-hemolysis, to explore aspects of pathogenesis. In our study, regardless of the isolation source, VAN-resistant (VAN-R) and CIP-resistant (CIP-R) E. faecalis and E. faecium were detected. The highest proportion of CIP-R strains was found among clinical isolates of E. faecalis and E. faecium, with clinical E. faecium also showing the highest proportion of VAN-R strains. But the highest proportion of VAN-R E. faecalis strains was found in wastewater samples. The highest TCL MIC90 values for E. faecalis were found in wastewater isolates, while for E. faecium, the highest TCL MIC90 values were observed in food isolates. The highest CHX MIC90 values for both E. faecalis and E. faecium were identified in clinical specimens. The results obtained for E. faecalis did not indicate differences in TCL MIC and CHX MIC values with respect to sensitivity to VAN and CIP. Higher CHX MIC50 and CHX MIC90 values were obtained for CIP-R and VAN-R E. faecium. Among the tested isolates, 97.75% of the E. faecalis isolates produced biofilm, while 72.22% of the E. faecium isolates did so as well. In biofilm-forming strength categories III and IV, statistically significantly higher proportions of CIP-susceptible (CIP-S) and VAN-susceptible (VAN-S) E. faecalis were determined. In category III, there is no statistically significant difference in E. faecium CIP sensitivity. In category IV, we had a significantly higher proportion of CIP-R strains. On the other hand, the association between the moderate or strong category of biofilm formation and E. faecium VAN susceptibility was not significant. E. faecalis isolated from wastewater had a CSH index (HI) ≥ 50%, categorizing them as "moderate", while all the other strains were categorized as "low" based on the CSH index. Among the E. faecalis isolates, cell surface hydrophobicity indices differed significantly across isolation sources. In contrast, E. faecium isolates showed similar hydrophobicity indices across isolation sources, with no significant difference found. Moreover, no correlation was found between the enterococcal cell surface hydrophobicity and biofilm formation in vitro. After anaerobic incubation, β-hemolytic activity was confirmed in 19.10% of the E. faecalis and 3.33% of the E. faecium strains. [ABSTRACT FROM AUTHOR]

This study was aimed at monitoring the occurrence and potential sources of emerging contaminants in water sources within the Modder River catchment. Selected water quality indicators were analysed by Hanna multi-parameter meters. Emerging contaminants such as acetaminophen, carbamazepine, ibuprofen, atrazine, simazine, metolachlor, terbuthylazine, 17-alpha-ethinyl-estradiol, estradiol, progesterone, and testosterone were analysed by high performance liquid chromatography mass spectrometry. The sources of emerging contaminants were determined by statistical methods such as Pearson correlation and hierarchical cluster analysis. Results showed that all the sampled water sources have some level of questionable drinking water quality and necessitate some amount of treatment to reduce the contamination before consumption, especially DO, EC, and pH. The 17-alpha-ethinyl-estradiol mean values in rivers (7.79 and 31.55 µg/L), dams (1.83 and 6.90 µg/L), and treated drinking water (0.2 and 0.73 µg/L) were the highest in summer and autumn seasons, respectively. Wastewater effluents, domestic sewage, urban surface runoff, agricultural runoff, and illegal dumping were identified as the possible sources of emerging contaminants pollution. Waste management education, proper application of herbicides, and advance wastewater treatment methods were some of the suggested mitigation strategies. The outcomes may be relevant for environmental protection and water sustainability in the catchment. [ABSTRACT FROM AUTHOR]

This study investigated the sanitary quality of digestates resulting from the mesophilic anaerobic digestion (AD) of urban and agricultural organic wastes (OWs). 40 sanitary indicators, including pathogenic bacteria, antimicrobial resistance genes, virulence factor genes, and mobile genetic elements were evaluated using real-time PCR and/or droplet digital PCR. 13 polycyclic aromatic hydrocarbons (PAHs) and 13 pharmaceutical products (PHPs) were also measured. We assessed agricultural OWs from three treatment plants to study the effect of different AD processes (feeding mode, number of stages, pH), and used three laboratory-scale reactors to study the effect of different feedsupplies (inputs). The lab-scale reactors included: Lab1 fed with 97% activated sludge (urban waste) and 3% cow manure; Lab2 fed with 85% sludge-manure mixture supplemented with 15% wheat straw (WS); and Lab3 fed with 81% sludgemanure mixture, 15% WS, and 4% zeolite powder. Activated sludge favored the survival of the food-borne pathogens Clostridium perfringens and Bacillus cereus, carrying the toxin-encoding genes cpe and ces, respectively. Globally, the reactors fed with fecal matter supplemented with straw (Lab2) or with straw and zeolite (Lab3) had a higher hygienization efficiency than the reactor fed uniquely with fecal matter (Lab1). Three pathogenic bacteria (Enterococcus faecalis, Enterococcus faecium, and Mycobacterium tuberculosis complex), a beta-lactam resistance gene (blaTEM), and three mobile genetic elements (intI1, intI2, and IS26) were significantly decreased in Lab2 and Lab3. Moreover, the concentrations of 11 PAHs and 11 PHPs were significantly lower in Lab2 and Lab3 samples than in Lab1 samples. The high concentrations of micropollutants, such as triclosan, found in Lab1, could explain the lower hygienization efficiency of this reactor. Furthermore, the batch-fed reactor had a more efficient hygienization effect than the semi-continuous reactors, with complete removal of the ybtA gene, which is involved in the production of the siderophore yersiniabactin, and significant reduction of intI2 and tetO. These data suggest that it is essential to control the level of chemical pollutants in raw OWs to optimize the sanitary quality of digestates, and that adding co-substrate, such as WS, may overcome the harmful effect of pollutants. [ABSTRACT FROM AUTHOR]

Industrial discharge of hazardous organic and synthetic chemicals, such as antibacterials and dyes, poses severe risks to human health and the environment. This study was conducted to address the urgent need for efficient and stable zinc-oxide-based photocatalysts to degrade such pollutants. A novel approach to synthesizing silver-loaded zinc oxide (Ag@Z) catalysts was introduced by using a simple and efficient combination of hydrothermal and precipitation methods. Comprehensive characterization of Ag@Z photocatalysts was performed using XRD, XPS, Raman, UV–vis adsorption, FTIR, and SEM, revealing an enhancement of structural, optical, and morphological properties in comparison to pure zinc oxide. Notably, the 5%Ag@Z catalyst exhibited the highest degradation efficiency among the other synthesized catalysts under UV-C light irradiation, and enhanced the degradation rate of pure zinc oxide (Z) by 1.14 and 1.64 times, for Triclosan (TCS) and Methylene Blue (MB), respectively. the effect of catalyst dose and initial concentration was studied. A mechanism of degradation was proposed after investigating the effect of major reactive species. The 5%Ag@Z catalyst increased the photostability, which is a major problem of zinc oxide due to photocorrosion after reusability. We found that 50% and 74% of energy consumption for the photocatalytic degradation of TCS and MB by 5%Ag@Z, respectively, was saved in compassion with zinc oxide. The remarkable photocatalytic performance and the good recovery rate of Ag@Z photocatalysts demonstrate their high potential for photocatalytic degradation of organic contaminants in water. [ABSTRACT FROM AUTHOR]

[Display omitted] It has been a challenge to prepared polyether block amide (PEBA) fibrous membrane via solution electrospinning. The only few reported methods though involved hazardous solvents and surfactants which were against the principle of green chemistry. In this work, uniform fibrous membrane of PEBA was successfully fabricated by solution electrospinning with a bio-based solvent dihydrolevoglucosenone (Cyrene). To further improve the mechanical strength and adsorption performance of the PEBA membrane, a hierarchical magnesium hydrogen phosphate (MgHPO 4 ·1.2H 2 O, MHP) was synthesized to blend evenly into the PEBA matrix. A Janus MHP/PEBA membrane with one side of hydrophobic surface and the other side of hydrophilic surface was subsequently prepared, which exhibited fast adsorption, high capacity, good selectivity and reusability towards ibuprofen, acetaminophen, carbamazepine and triclosan. In addition, the Janus membrane showed high removal efficiency of the above contaminants in secondary wastewater effluent with good long term stability. It demonstrated that this Janus MHP/PEBA membrane had a good potential in practical wastewater treatment. [ABSTRACT FROM AUTHOR]

As bioindicators, freshwater bivalves are crucial for the assessment of the contamination impact on different levels of biological integration. Escherichia coli is used as a bioindicator of water fecal contamination, representing a critical global concern, especially with the rise of multidrug-resistant (MDR) strains. Phylogenetic diversity, pathotypic characterization, and antibiotic resistance profiles of E. coli isolated from freshwater bivalves (Anodonta anatina) were assessed. Samples were collected from the Tua River in Northern Portugal, from two different sites, Chelas and Barcel, representing different degrees of contamination. Antimicrobial susceptibility testing was performed by the disk diffusion method, and characterizations of the phylogenetic groups and pathotypes were assessed by PCR-multiplex and real-time PCR-multiplex, respectively. Results showed that 60% of isolates were characterized as MDR, including resistance to carbapenems, considered the last resort against multidrug-resistant bacteria. Within this study, it was also possible to verify the antimicrobial resistance (AMR) profile differences between the two sampling sites, with bivalve isolates from the Chelas site showing a higher percentage of antibiotic resistance. Among the E. coli isolates, the highest prevalence (55%) was observed in group B1, followed by group D or E (15%), group A (10%), and group E or Clade I (10%). None of the isolates were classified as diarrheagenic E. coli (DEC). This work highlights the potential transmission of antimicrobial-resistant bacteria through bivalves in the food chain. The 'One Health' approach is crucial for combating antimicrobial resistance, namely in edible freshwater species, emphasizing active surveillance to protect human, animal, and environmental health against the spread of antibiotic-resistant bacteria in aquatic environments. [ABSTRACT FROM AUTHOR]

Abstract Introduction Exposure to endocrine disrupting chemicals (EDCs) can result in alterations of natural hormones in the body. The aim of this review article is to highlight the knowledge about EDCs and obesity. Methods A scoping review of the electronic literature was performed using PubMed platform for studies on EDCs and obesity published between the years 2013–2023. A total of 10 systematic reviews and meta-analysis studies met our inclusion criteria on more prominent EDCs focusing mainly on bisphenols, including parabens, triclosan, and phthalates, and their association with obesity. Design Scoping review. Results EDCs, mostly bisphenols and phthalates, are related to health effects, while there is less information on the impact of parabens and triclosan. A series of negative physiological effects involving obesogenic, diabetogenic, carcinogenic, and inflammatory mechanisms as well as epigenetic and microbiota modulations was related to a prolonged EDCs exposure. A more profound research of particular pollutants is required to illuminate the accelerating effects of particular EDCs, mixtures or their metabolites on the mechanism of the development of obesity. Conclusion Considering the characteristics of EDCs and the heterogeneity of studies, it is necessary to design specific studies of effect tracking and, in particular, education about daily preventive exposure to EDCs for the preservation of long-term public health.

Endocrine disruptors are molecules that can interfere with the proper functioning of the endocrine system and lead to harmful effects in living organisms. This review focuses on the impact of synthetic fragrances, which are commonly found in personal care and household products, on the endocrine system. The article discusses the different types of hormones in the body and how they interact with receptors to produce signals. It also explores how endocrine disruptors can interfere with hormone signaling and transport, leading to adverse effects in the body. This work underscores the crucial need for further research into the impact of synthetic fragrances on the endocrine system and the importance of using safer alternatives in personal care and household products.

Clothing and textile industries are major contributors to environmental pollution including textile manufacturing through garment production, spinning, weaving, and dyeing. In this context, the sustainability textile industry is a big challenge and contributes to serving a large segment of society. Also, textile wastes could be used as a raw material for added-value products. Herein, in this study, recycling of residues fabric was treated with antimicrobial nanocomposite to reach the best use of exhausts and obtain multifunction products of aesthetic via the technical design of the waste raw materials. Besides, solving the unemployment problem by opening fields for small industry projects capable of producing high-value textile artifacts, especially when treated against microbes, can be applied to home furnishings. The waste fabric was treated via green synthesis nanocomposite based on chitosan and in situ prepared ZnONPs and cross-linked with tannic acid. The prepared nanocomposite was characterized using physicochemical analysis including attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray diffraction (XRD). Additionally, the nanocomposite and treated fabric topographical behavior were studied using scanning electron microscopy (SEM) attachment with energy dispersive X-ray analysis (EDX), and images were processed to evaluate the roughness structure. Additionally, high-resolution transmission electron microscopy (HR-TEM) and dynamic light scattering (DLS) were performed to ensure the size and stability of the nanocomposite. The obtained results affirmed the green synthesis of nanocomposite with a size around 130 nm, as well as the doped ZnONPs average size of 26 nm and treated waste fabric, performed a promising attraction between nanocomposite and fabric fibers. Moreover, the antimicrobial study observed excellent activity of nanocomposite against bacteria and unicellular fungi as well. [ABSTRACT FROM AUTHOR]

Antimicrobial resistance poses a significant challenge to public health, and is worsened by the widespread misuse of antimicrobial agents such as triclosan (TCS) in personal care and household products. Leveraging the electrochemical reactivity of TCS's phenolic hydroxyl group, this study investigates the electrochemical behavior of TCS on a Cu-based nano-metal–organic framework (Cu-BTC) surface. The synthesis of Cu-BTC via a room temperature solvent method, with triethylamine as a regulator, ensures uniform nanoparticle formation. The electrochemical properties of Cu-BTC and the signal enhancement mechanism are comprehensively examined. Utilizing the signal amplification effect of Cu-BTC, an electrochemical sensor for TCS detection is developed and optimized using response surface methodology. The resulting method offers a simple, rapid, and highly sensitive detection of TCS, with a linear range of 25–10,000 nM and a detection limit of 25 nM. This research highlights the potential of Cu-BTC as a promising material for electrochemical sensing applications, contributing to advancements in environmental monitoring and public health protection. [ABSTRACT FROM AUTHOR]

Wound is defined as the damage to biological tissues including skin, mucous membranes and organ tissues. The acute wound heals in less than 4 weeks without complications, while a chronic wound takes longer than 6 weeks to heal. Wound healing occurs in 4 phases, namely, coagulation, inflammatory, proliferative and remodeling phases. Triclosan and benzalkonium chloride are commonly used as skin disinfectants in wound healing. However, they cause allergic contact dermatitis and antibiotic resistance. Medicinal plants are widely studied due to the limited availability of wound healing agents. The present review included six commonly available medicinal plants in Malaysia such as Aloe barbadensis Miller, Carica papaya Linn., Centella asiatica Linn., Cymbopogon nardus Linn., Ficus benghalensis Linn. and Hibiscus rosa sinensis Linn. Various search engines and databases were used to obtain the scientific findings, including Google Scholar, ScienceDirect, PubMed Central and Research Gate. The review discussed the possible mechanism of action of medicinal plants and their active constituents in the wound healing process. In addition, their application in nanotechnology and wound dressings was also discussed in detail. [ABSTRACT FROM AUTHOR]

Copyright of Archives of Environmental Protection is the property of Polish Academy of Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Peanut shells' adsorption performance in caffeine and triclosan removal was studied. Peanut shells were analyzed for their chemical composition, morphology, and surface functional groups. Batch adsorption and fixed-bed column experiments were carried out with solutions containing 30 mg/L of caffeine and triclosan. The parameters examined included peanut shell particle size (120–150, 300–600, and 800–2000 µm), adsorbent dose (0.02–60 g/L), contact time (up to 180 min), bed height (4–8 cm), and hydraulic loading rate (2.0 and 4.0 m3/m2-day). After determining the optimal adsorption conditions, kinetics, isotherm, and breakthrough curve models were applied to analyze the experimental data. Peanut shells showed an irregular surface and consisted mainly of polysaccharides (around 70% lignin, cellulose, and hemicellulose), with a specific surface area of 1.7 m2/g and a pore volume of 0.005 cm3/g. The highest removal efficiencies for caffeine (85.6 ± 1.4%) and triclosan (89.3 ± 1.5%) were achieved using the smallest particles and 10.0 and 0.1 g/L doses over 180 and 45 min, respectively. Triclosan showed easier removal compared to caffeine due to its higher lipophilic character. The pseudo-second-order kinetics model provided the best fit with the experimental data, suggesting a chemisorption process between caffeine/triclosan and the adsorbent. Equilibrium data were well-described by the Sips model, with maximum adsorption capacities of 3.3 mg/g and 289.3 mg/g for caffeine and triclosan, respectively. In fixed-bed column adsorption tests, particle size significantly influenced efficiency and hydraulic behavior, with 120–150 µm particles exhibiting the highest adsorption capacity for caffeine (0.72 mg/g) and triclosan (143.44 mg/g), albeit with clogging issues. The experimental data also showed good agreement with the Bohart–Adams, Thomas, and Yoon–Nelson models. Therefore, the findings of this study highlight not only the effective capability of peanut shells to remove caffeine and triclosan but also their versatility as a promising option for water treatment and sanitation applications in different contexts. [ABSTRACT FROM AUTHOR]

Objective: Staphylococcus aureus, a severe public health hazard, causesfoodborne diseasesfrom the consumption of contaminated food. Various antimicrobials and disinfectants are used throughout the food chain to reduce microbial contamination or eliminate microorganisms on food contact surfaces. However, little is known about the susceptibility of disinfectants to food pathogens, including S. aureus, which can develop resistance to antimicrobials and cause severe diseases. Materials and Methods: The antimicrobial activity of triclosan, cetyltrimethylammonium bromide (CTAB), acetic acid, citric acid, and lactic acid against 50 S. aureus isolates, including multidrug-resistant (MDR) isolates originating from ground beef, chicken, and fish, was investigated using the broth microdilution method. Results: The minimal inhibitory concentrations (MICs) of triclosan, CTAB, acetic acid, citric acid, and lactic acid against the isolates were 0.125-16 μg/mL, 0.25-32 μg/mL, 102.5-26250 μg/mL, 187.5-12000 μg/mL, and 703-22500 μg/mL, respectively. Almost all MDR isolates showed resistance to triclosan. There was a statistically significant difference in MICs between triclosan and organic acids, as well as between CTAB and organic acids (p < 0.05). However, a statistically significant difference was not observed in triclosan and CTAB, as well as in acetic acid and lactic acid (p > 0.05). Pearson correlation coefficient revealed a strong relationship between triclosan and multidrug resistance. Based on the multiple linear regression analysis, triclosan had a positive effect on multidrug resistance (p < 0.05). Conclusion: This research gives helpful information on the susceptibility of disinfectants to S. aureus, particularly to resistant S. aureus isolates from meats, which may help to recommend proper disinfectant use in food production. [ABSTRACT FROM AUTHOR]

Triclosan (TCS) is an antimicrobial toxicant found in a myriad of consumer products and has been detected in human tissues, including breastmilk. We have evaluated the impact of lactational TCS on UDP-glucuronosyltransferase 1A1 (UGT1A1) expression and bilirubin metabolism in humanized UGT1 (hUGT1) neonatal mice. In hUGT1 mice, expression of the hepatic UGT1A1 gene is developmentally delayed resulting in elevated total serum bilirubin (TSB) levels. We found that newborn hUGT1 mice breastfed or orally treated with TCS presented lower TSB levels along with induction of hepatic UGT1A1. Lactational and oral treatment by gavage with TCS leads to the activation of hepatic nuclear receptors constitutive androstane receptor (CAR), peroxisome proliferator-activated receptor alpha (PPARα), and stress sensor, activating transcription factor 4 (ATF4). When CAR-deficient hUGT1 mice (hUGT1/Car−/−) were treated with TCS, TSB levels were reduced with a robust induction of hepatic UGT1A1, leaving us to conclude that CAR is not tied to UGT1A1 induction. Alternatively, when PPARα-deficient hUGT1 mice (hUGT1/Pparα−/−) were treated with TCS, hepatic UGT1A1 was not induced. Additionally, we had previously demonstrated that TCS is a potent inducer of ATF4, a transcriptional factor linked to the integrated stress response. When ATF4 was deleted in liver of hUGT1 mice (hUGT1/Atf4ΔHep) and these mice treated with TCS, we observed superinduction of hepatic UGT1A1. Oxidative stress genes in livers of hUGT1/Atf4ΔHep treated with TCS were increased, suggesting that ATF4 protects liver from excessive oxidative stress. The increase oxidative stress may be associated with superinduction of UGT1A1. The expression of ATF4 in neonatal hUGT1 hepatic tissue may play a role in the developmental repression of UGT1A1. [ABSTRACT FROM AUTHOR]

Large outbreaks of Shigella sonnei among children in Haredi Jewish (ultra-Orthodox) communities in Brooklyn, New York have occurred every 3–5 years since at least the mid-1980s. These outbreaks are partially attributable to large numbers of young children in these communities, with transmission highest in child care and school settings, and secondary transmission within households. As these outbreaks have been prolonged and difficult to control, we developed an agent-based model of shigellosis transmission among children in these communities to support New York City Department of Health and Mental Hygiene staff. Simulated children were assigned an initial susceptible, infectious, or recovered (immune) status and interacted and moved between their home, child care program or school, and a community site. We calibrated the model according to observed case counts as reported to the health department. Our goal was to better understand the efficacy of existing interventions and whether limited outreach resources could be focused more effectively. We evaluated how well disseminating hand washing education in child care programs can reduce the number of infected children. The model indicated that intervention efficacy may be as high as 24% when all intervention parameters are at optimal values but only approximately 7% for a more realistic, less stringent scenario. We ranked intervention parameters according to their permutation importance using a random-forest regression analysis. The most important parameter was the minimum number of reported cases in a child care program that triggers a visit to disseminate hand washing education, followed by the use of non-antibacterial soap in hand washing education, the number of additional visits to child care programs, and the probability of successfully obtaining information on child care program attendance via patient interview. Additional strategies should be considered, such as working with community partners to assist with hand hygiene education at facilities during an outbreak. [ABSTRACT FROM AUTHOR]

Dental caries is a global health problem that requires better prevention measures. One of the goals is to reduce the prevalence of the cariogenic Gram-positive bacterium Streptococcus mutans. We have recently shown that naturally occurring arachidonic acid (AA) has both anti-bacterial and anti-biofilm activities against this bacterium. An important question is how these activities are affected by other anti-bacterial compounds commonly used in mouthwashes. Here, we studied the combined treatment of AA with chlorhexidine (CHX), cetylpyridinium chloride (CPC), triclosan, and fluoride. Checkerboard microtiter assays were performed to determine the effects on bacterial growth and viability. Biofilms were quantified using the MTT metabolic assay, crystal violet (CV) staining, and live/dead staining with SYTO 9/propidium iodide (PI) visualized by spinning disk confocal microscopy (SDCM). The bacterial morphology and the topography of the biofilms were visualized by high-resolution scanning electron microscopy (HR-SEM). The effect of selected drug combinations on cell viability and membrane potential was investigated by flow cytometry using SYTO 9/PI staining and the potentiometric dye DiOC2(3), respectively. We found that CHX and CPC had an antagonistic effect on AA at certain concentrations, while an additive effect was observed with triclosan and fluoride. This prompted us to investigate the triple treatment of AA, triclosan, and fluoride, which was more effective than either compound alone or the double treatment. We observed an increase in the percentage of PI-positive bacteria, indicating increased bacterial cell death. Only AA caused significant membrane hyperpolarization, which was not significantly enhanced by either triclosan or fluoride. In conclusion, our data suggest that AA can be used together with triclosan and fluoride to improve the efficacy of oral health care. [ABSTRACT FROM AUTHOR]

The concentration of antimicrobial agents in environments like water and food has increased rapidly, which led to a rapid increase in antimicrobial resistance levels in the environment. Monitoring of bacterial resistance levels is considered as a necessary means to control the bacterial resistance. Reference standards are critical for antimicrobial susceptibility testing. CLSI M45 A3 standard defines pathogenic microorganisms that cause infections less frequently than those covered by CLSI M02, M07, and M100 as Infrequently Isolated or Fastidious Bacteria and specifies antimicrobial susceptibility testing methods. Our study investigated the epidemiology and antimicrobial susceptibility testing data of Infrequently Isolated or Fastidious Bacteria strains isolated from blood specimens in 70 hospitals in Guangdong Province between 2017 and 2021. We defined testing methods other than those specified in CLSI M45 A3 as "Non-Standardized." The proportion of standardized antimicrobial susceptibility testing for penicillin increased significantly (Corynebacterium spp. 17.4% vs. 50.0% p < 0.05; Micrococcus spp. 50.0% vs. 77.8% p < 0.05; Abiotrophia spp. and Granulicatella spp. 21.4% vs. 90.9% p < 0.001), while for cefotaxime (Corynebacterium spp. 0.0% vs. 45.2% p < 0.05; Abiotrophia spp. and Granulicatella spp. 0.0% vs. 14.3% p = 0.515) and vancomycin increased finitely. Non-standardized methods were used for all other antimicrobials. Due to limitations in the economic and medical environment, some clinical laboratories are unable to fully comply with CLSI M45 A3 standard. We recommend that CLSI should add breakpoints for disk diffusion method to improve the standardization of antimicrobial susceptibility testing. [ABSTRACT FROM AUTHOR]

The escalating global challenge of antimicrobial resistance demands innovative approaches. This review delves into the current status and future prospects of bioengineered metallic nanoparticles derived from natural sources as potent antimicrobial agents. The unique attributes of metallic nanoparticles and the abundance of natural resources have sparked a burgeoning field of research in combating microbial infections. A systematic review of the literature was conducted, encompassing a wide range of studies investigating the synthesis, characterization, and antimicrobial mechanisms of bioengineered metallic nanoparticles. Databases such as PubMed, Scopus, Web of Science, ScienceDirect, Springer, Taylor & Francis online and OpenAthen were extensively searched to compile a comprehensive overview of the topic. The synthesis methods, including green and sustainable approaches, were examined, as were the diverse biological sources used in nanoparticle fabrication. The amalgamation of metallic nanoparticles and natural products has yielded promising antimicrobial agents. Their multifaceted mechanisms, including membrane disruption, oxidative stress induction, and enzyme inhibition, render them effective against various pathogens, including drug-resistant strains. Moreover, the potential for targeted drug delivery systems using these nanoparticles has opened new avenues for personalized medicine. Bioengineered metallic nanoparticles derived from natural sources represent a dynamic frontier in the battle against microbial infections. The current status of research underscores their remarkable antimicrobial efficacy and multifaceted mechanisms of action. Future prospects are bright, with opportunities for scalability and cost-effectiveness through sustainable synthesis methods. However, addressing toxicity, regulatory hurdles, and environmental considerations remains crucial. In conclusion, this review highlights the evolving landscape of bioengineered metallic nanoparticles, offering valuable insights into their current status and their potential to revolutionize antimicrobial therapy in the future. [ABSTRACT FROM AUTHOR]

This research delves deeply into the intricate degradation kinetics of triclosan, employing two distinct methodologies: UV and simulated solar irradiation. Through a comprehensive comparative analysis, the study endeavors to elucidate the efficacy of these techniques, aiming to shed light on their respective methodological strengths and limitations. The study compares the efficacy of UV and simulated solar irradiation techniques for triclosan degradation, revealing that both methods exhibit effectiveness in degrading triclosan, with variations observed in degradation rates and byproduct formation. Through a detailed examination of the kinetics of triclosan degradation, the study reveals the intricate pathways and mechanisms involved in the photodegradation process. Results highlight the influence of irradiance levels and residence times on degradation efficiency. The research identifies optimal conditions for triclosan degradation, emphasizing the importance of residence time and irradiance levels. Results show that a residence time of 4 h and an irradiance level of 450 W m−2 maximize degradation efficiency. Analysis of degradation byproducts provides insights into the transformation pathways of triclosan under UV and simulated solar irradiation, indicating the formation of 2,4-dichlorophenol, quinone, and hydroquinone as primary byproducts. [ABSTRACT FROM AUTHOR]

A set of alkyl-/1H-1,2,3-triazole-based dimers was strategically designed and synthesized to evaluate their in vitro anti-mycobacterial activities against Mycobacterium tuberculosis and the non-tuberculous Mycobacterium abscessus strains. Systematic variations in the nature (alkyl/1H-1,2,3-triazole) and positioning of the linker were implemented based on the docking scores observed in the binding sites identified in the crystal structures of InhA from M. tuberculosis and M. abscessus. However, the in vitro evaluation results revealed that the synthesized compounds did not exhibit inhibitory effects on the growth of mycobacteria, even at the highest tested concentrations. The elevated lipophilicity values determined through ADMET studies for these synthesized dimers might be a contributing factor to their poor activity profiles.

ABSTRACT Antiseptics are widely used in oral healthcare to prevent or treat oral diseases, such as gingivitis and periodontitis. However, the incidence of bacteria being tolerant to standard antiseptics has sharply increased over the last few years. This stresses the urgency for surveillance against tolerant organisms, as well as the discovery of novel antimicrobials. Traditionally, susceptibility to antimicrobials is assessed by broth micro-dilution or disk diffusion assays, both of which are time-consuming, labor-intensive, and provide limited information on the mode of action of the antimicrobials. The abovementioned limitations highlight the need for the development of new methods to monitor and further understand antimicrobial susceptibility. In this study, we used real-time flow cytometry, combined with membrane permeability staining, as a quick and sensitive technology to study the quantitative and qualitative responses of two oral pathobionts to different concentrations of chlorhexidine (CHX), cetylpyridinium chloride (CPC), or triclosan. Apart from the real-time monitoring of cell damage, we further applied a phenotypic fingerprinting method to differentiate between the bacterial subpopulations that arose due to treatment. We quantified the pathobiont damage rate of different antiseptics at different concentrations within 15 minutes of exposure and identified the conditions under which the bacteria were most susceptible. Moreover, we detected species-specific and treatment-specific phenotypic subpopulations. This proves that real-time flow cytometry can provide information on the susceptibility of different microorganisms in a short time frame while differentiating between antiseptics and thus could be a valuable tool in the discovery of novel antimicrobial compound, while at the same time deciphering their mode of action.IMPORTANCEWith increasing evidence that microorganisms are becoming more tolerant to standard antimicrobials, faster and more accessible antimicrobial susceptibility testing methods are needed. However, traditional susceptibility assays are laborious and time-consuming. To overcome the abovementioned limitations, we introduce a novel approach to define antimicrobial susceptibility in a much shorter time frame with the use of real-time flow cytometry. Furthermore, phenotypic fingerprinting analysis can be applied on the data to study the way antiseptics affect the bacterial cell morphology over time and, thus, gain information on the mode of action of a certain compound.

Triclosan (TCS) is an eminent antibacterial agent. However, extensive usage causes potential health risks like hepatotoxicity, intestinal damage, kidney injury, etc. Existing studies suggested that TCS would disrupt bile acid (BA) enterohepatic circulation, but its toxic mechanism remains unclear. Hence, the current study established an 8-week TCS exposure model to explore its potential toxic mechanism. The results discovered 8 weeks consecutive administration of TCS induced distinct programmed cell death, inflammatory cell activation and recruitment, and excessive BA accumulation in liver. Furthermore, the expression of BA synthesis and transport associated genes were significantly dysregulated upon TCS treatment. Additional mechanism exploration revealed that Fxr inhibition induced by TCS would be the leading cause for unusual BA biosynthesis and transport. Subsequent Fxr up-stream investigation uncovered TCS exposure caused pyroptosis and its associated IL-1β would be the reason for Fxr reduction mediated by NF-κB. NF-κB blocking by dimethylaminoparthenolide ameliorated TCS induced BA disorder which confirmed the contribution of NF-κB in Fxr repression. To sum up, our findings conclud TCS-caused BA disorder is attributed to Fxr inhibition, which is regulated by the IL-1β-NF-κB signaling pathway. Hence, we suggest Fxr would be a potential target for abnormal BA stimulated by TCS and its analogs.

Triclosan (TCS) is an environmental pollutant. In recent years, there has been increasing level of concern regarding the potential toxicity of TCS in animals and humans, especially its effects on the nervous system. However, whether TCS induces ADHD-like behaviour and the mechanism by which it affects neural function are unclear. The impact of 60 days of continuous exposure to TCS on the behaviour of offspring rats was assessed in this research. According to the results of this study, TCS exposure led to ADHD-like behaviour in offspring rats and activated microglia in the prefrontal cortex (PFC), inducing inflammatory factor release. In vitro studies showed that TCS increased the levels of inflammatory cytokines, including interleukin (IL)-1β, IL-6 and tumour necrosis factor (TNF)-α, in HMC3 cells. More importantly, we found that TCS regulated the STAT3 pathway by upregulating PKM2 via hnRNPA1. In summary, this study suggested that TCS can induce ADHD-like behaviour in offspring rats and continuously activate HMC3 microglia through the hnRNPA1-PKM2-STAT3 feedback loop, promoting inflammatory cytokine secretion.

In recent years, exposure to triclosan (TCS) has been linked to an increase in psychiatric disorders. Nonetheless, the precise mechanisms of this occurrence remain elusive. Therefore, this study developed a long-life TCS-exposed rat model, an SH-SY5Y cell model, and an atomoxetine hydrochloride (ATX) treatment model to explore and validate the neurobehavioral mechanisms of TCS from multiple perspectives. In the long-life TCS-exposed model, pregnant rats received either 0 mg/kg (control) or 50 mg/kg TCS by oral gavage throughout pregnancy, lactation, and weaning of their offspring (up to 8 weeks old). In the ATX treatment model, weanling rats received daily injections of either 0 mg/kg (control) or 3 mg/kg ATX via intraperitoneal injection until they reached 8 weeks old. Unlike the TCS model, ATX exposure only occurred after the pups were weaned. The results indicated that long-life TCS exposure led to attention-deficit hyperactivity disorder (ADHD)-like behaviors in male offspring rats accompanied by dopamine-related mRNA and protein expression imbalances in the prefrontal cortex (PFC). Moreover, in vitro experiments also confirmed these findings. Mechanistically, TCS reduced dopamine (DA) synthesis, release, and transmission, and increased reuptake in PFC, thereby reducing synaptic gap DA levels and causing dopaminergic deficits. Additional experiments revealed that increased DA concentration in PFC by ATX effectively alleviated TCS-induced ADHD-like behavior in male offspring rats. These findings suggest that long-life TCS exposure causes ADHD-like behavior in male offspring rats through dopaminergic deficits. Furthermore, ATX treatment not only reduce symptoms in the rats, but also reveals valuable insights into the neurotoxic mechanisms induced by TCS.

Previous studies reported that hemoprotein CYP450 catalyzed triclosan coupling is an “uncommon” metabolic pathway that may enhance toxicity, raising concerns about its environmental and health impacts. Hemoglobin, a notable hemoprotein, can catalyze endogenous phenolic amino acid tyrosine coupling reactions. Our study explored the feasibility of these coupling reactions for exogenous phenolic pollutants in plasma. Both hemoglobin and hemin were found to catalyze triclosan coupling in the presence of H₂O₂. This resulted in the formation of five diTCS-2 H, two diTCS-Cl-3 H, and twelve triTCS-4 H in phosphate buffer, with a total of nineteen triclosan coupling products monitored using LC-QTOF. In plasma, five diTCS-2 H, two diTCS-Cl-3 H, and two triTCS-4 H were detected in hemoglobin-catalyzed reactions. Hemin showed a weaker catalytic effect on triclosan transformation compared to hemoglobin, likely due to hemin dimerization and oxidative degradation by H₂O₂, which limits its catalytic efficiency. Triclosan transformation in the human plasma-like medium still occurs with high H₂O₂, despite the presence of antioxidant proteins that typically inhibit such transformations. In plasma, free H₂O₂ was depleted within 40 minutes when 800 µM H₂O₂ was added, suggesting a rapid consumption of H₂O₂ in these reactions. Antioxidative species, or hemoglobin/hemin scavengers such as bovine serum albumin, may inhibit but not completely terminate the triclosan coupling reactions. Previous studies reported that diTCS-2 H showed higher hydrophobicity and greater endocrine-disrupting effects compared to triclosan, which further underscores the potential health risks. This study indicates that hemoglobin and heme in human plasma might significantly contribute to phenolic coupling reactions, potentially increasing health risks.

Chlorinated organic pollutants constitute a significant category of persistent organic pollutants due to their widespread presence in the environment, which is primarily attributed to the expansion of agricultural and industrial activities. These pollutants are characterized by their persistence, potent toxicity, and capability for long-range dispersion, emphasizing the importance of their eradication to mitigate environmental pollution. While conventional methods for removing chlorinated organic pollutants encompass advanced oxidation, catalytic oxidation, and bioremediation, the utilization of biochar has emerged as a prominent green and efficacious method in recent years. Here we review biochar's role in remediating typical chlorinated organics, including polychlorinated biphenyls (PCBs), triclosan (TCS), trichloroethene (TCE), tetrachloroethylene (PCE), organochlorine pesticides (OCPs), and chlorobenzenes (CBs). We focus on the impact of biochar material properties on the adsorption mechanisms of chlorinated organics. This review highlights the use of biochar as a sustainable and eco-friendly method for removing chlorinated organic pollutants, especially when combined with biological or chemical strategies. Biochar facilitates electron transfer efficiency between microorganisms, promoting the growth of dechlorinating bacteria and mitigating the toxicity of chlorinated organics through adsorption. Furthermore, biochar can activate processes such as advanced oxidation or nano zero-valent iron, generating free radicals to decompose chlorinated organic compounds. We observe a broader application of biochar and bioprocesses for treating chlorinated organic pollutants in soil, reducing environmental impacts. Conversely, for water-based pollutants, integrating biochar with chemical methods proved more effective, leading to superior purification results. This review contributes to the theoretical and practical application of biochar for removing environmental chlorinated organic pollutants.

In the context of pandemic viruses and pathogenic bacteria, triclosan (TCS), as a typical antibacterial agent, is widely used around the world. However, the health risks from TCS increase with exposure, and it is widespread in environmental and human samples. Notably, environmental transformation and human metabolism could induce potentially undesirable risks to humans, rather than simple decontamination or detoxification. This review summarizes the environmental and human exposure to TCS covering from 2004 to 2023. Particularly, health impacts from the environmental and metabolic transformation of TCS are emphasized. Environmental transformations aimed at decontamination are recognized to form carcinogenic products such as dioxins, and ultraviolet light and excessive active chlorine can promote the formation of these dioxin congeners, potentially threatening environmental and human health. Although TCS can be rapidly metabolized for detoxification, these processes can induce the formation of lipophilic ether metabolic analogs via cytochrome P450 catalysis, causing possible adverse cross-talk reactions in human metabolic disorders. Accordingly, TCS may be more harmful in environmental transformation and human metabolism. In particular, TCS can stimulate the transmission of antibiotic resistance even at trace levels, threatening public health. Considering these accruing epidemiological and toxicological studies indicating the multiple adverse health outcomes of TCS, we call on environmental toxicologists to pay more attention to the toxicity evolution of TCS during environmental transformation and human metabolism.

Triclosan is a potent antibacterial compound widely used in everyday products. Whether triclosan affects Leydig cell function in adult male rats remains unknown. In this study, 0, 50, 100, or 200 mg/kg/day triclosan was gavaged to Sprague-Dawley male rats from 56 to 63 days postpartum. Triclosan significantly reduced serum testosterone levels at ≥ 50 mg/kg/day via downregulating the expression of Leydig cell gene Lhcgr, Scarb1, Star, Cyp11a1, Hsd3b1, Cyp17a1, and Hsd17b3 and regulatory transcription factor Nr3c2 at 100–200 mg/kg. Further analysis showed that triclosan markedly increased autophagy as shown by increasing LC3II and BECN1 and decreasing SQSTM1. The mRNA m6A modification analysis revealed that triclosan significantly downregulated Fto expression at 200 mg/kg while upregulating Ythdf1 expression at 100 and 200 mg/kg, leading to methylation of Becn1 mRNA as shown by MeRIP assay. Triclosan significantly inhibited testosterone output in rat R2C Leydig cells at ≥ 5 μM via downregulating Fto and upregulating Ythdf1. SiRNA Ythdf1 knockdown can reverse triclosan-mediated mitophagy in R2C cells, thereby reversing the reduction of testosterone output. In summary, triclosan caused Becn1 m6A methylation by downregulating Fto and upregulating Ythdf1, which accelerated Becn1 translation, thus leading to the occurrence of autophagy and the decrease of testosterone biosynthesis.

The document discusses antimicrobial resistance (AMR), which occurs when bacteria, viruses, fungi, and parasites no longer respond to antimicrobial medicines. AMR is attributed to the misuse and overuse of antibiotics and has significant health and economic costs. The document explores various natural products and nanoparticles that possess antimicrobial properties, as well as alternative antibiotic options. These antimicrobial agents have applications in healthcare, medical textiles, hygiene, medicine, household use, and food packaging. However, further research is needed to address concerns regarding efficacy, cytotoxicity, and biocompatibility. The document also highlights a special issue covering different types of antimicrobial materials, including nanomaterials, textiles, and biomaterials. [Extracted from the article]

Triclosan (TCS) is a widespread antimicrobial agent that is associated with many adverse health outcomes. Its gut toxicity has been attributed to the molecular modifications mediated by commensal microbes, but microbial transformations of TCS derivatives in the gut lumen are still largely unknown. Aromatic hydroxylation is the predominant oxidative metabolism of TCS that linked to its toxicological effects in host tissues. Here, we aimed to reveal the biological fates of hydroxyl-TCS (OH-TCS) in the colon, where intestinal microbes mainly reside. Unlike the profiles generated via host metabolism, OH-TCS species remain unconjugated in human stools from a cohort study. Through tracking molecular compositions in mouse intestinal tract, elevated abundance of free-form OH-TCS while reduced abundance of conjugated forms was observed in the colon digesta and mucosa. Using antibiotic-treated and germ-free mice, as well as in vitro approaches, we demonstrate that gut microbiota-encoded enzymes efficiently convert glucuronide/sulfate-conjugated OH-TCS, which are generated from host metabolism, back to their bioactive free-forms in colon tissues. Thus, host-gut microbiota metabolic interactions of TCS derivatives were proposed. These results shed light on the crucial roles of microbial metabolism in TCS toxicity, and highlight the importance of incorporating gut microbial transformations in health risk assessment of environmental chemicals.

Abstract Background Our study aimed to investigate the impact of urinary concentrations of personal care products (PCPs)-related phenols (PNs) and parabens (PBs), including Triclosan (TCS), Bisphenol A (BPA), Benzophenone-3 (BP-3), Butylparaben (BPB), Ethylparaben (EPB), Methylparaben (MPB), and Propylparaben (PPB), on urinary incontinence (UI) occurrence. Method We conducted a cross-sectional analysis using data from the National Health and Nutrition Examination Survey (NHANES) spanning the years 2007 to 2016. Regression analysis was employed to investigate the relationship between exposure to PCPs-related substances, various levels of exposure, and UI within both the general population and the female demographic. Additionally, the Bayesian Kernel Machine Regression (BKMR) model was used to assess the effects of mixtures on UI. Results Our analysis comprised 7,690 participants who self-reported their diagnosis. Among them, 12.80% experienced stress urinary incontinence (SUI), 11.80% reported urge urinary incontinence (UUI), and 10.22% exhibited mixed urinary incontinence (MUI). In our fully adjusted multivariable models, BP-3 exposure exhibited a positive association with SUI (OR 1.07, 95% CI 1.02–1.14, p = 0.045). BPA exposure correlated with an increased risk of UUI (OR 1.21, 95% CI 1.01–1.44, p = 0.046) and MUI (OR 1.26, 95% CI 1.02–1.54, p = 0.029). TCS exposure displayed a negative correlation with the incidence of MUI (OR 0.87, 95% CI 0.79–0.97, p = 0.009). No significant links were observed between parabens and urinary incontinence. Notably, among the female population, our investigation revealed that BPA exposure heightened the risk of MUI (OR 1.28, 95% CI 1.01–1.63, p = 0.043). Participants in the highest tertile of BP-3 exposure demonstrated elevated likelihoods of SUI and MUI compared to those in the lowest tertile. In the BKMR analysis, negative trends were observed between the mixture and the risks of UUI and MUI when the mixture ranged from the 25th to the 40th and 35th to the 40th percentiles or above, respectively. Additionally, a positive trend was identified between the mixture and MUI when it was in the 40th to 55th percentile. Conclusion In conclusion, our findings suggest that exposure to BPA, TCS, and BP-3 may contribute to the development of urinary incontinence.

The widespread use of triclosan (TCS) across the globe poses a substantial threat to both human well-being and the ecosystem. This necessitates the development of eco-friendly adsorption techniques to address triclosan contamination in wastewater. This research aims to develop novel eco-friendly synthesis method using Syzygium jambos (SJ) leaf extract to produce small-sized Mesoporous Silica Nanoparticles (MSNs) by varying surfactant to silica ratio. Different ratios such as 1:50, 1:100, and 1:200 (1 mL of tetraethyl orthosilicate (TEOS) is equivalent to cetyltrimethylammonium bromide (CTAB) in mg) were explored without chemical stabilising agents or alcohol diluents. The synthesized materials were named as MSN1, MSN2, and MSN3. Characterisation studies using Field emission scanning electron microscopy (FE-SEM) showed that MSN3 exhibited smallest size of 30 ± 5nm. The physical, chemical and morphological properties were analysed for the materials using X-Ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDS), Zeta potential (ZP), Brunauer-Emmett-Teller (BET), Thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). Notably, the developed nanomaterial demonstrated noteworthy stability with a ZP of −33.1 mV and an impressive surface area of 545 m2/g. FT-IR peaks of biosorbent were obtained at 460, 800, and 975 1/cm. This confirms the existence of (Si–O–Si) bonds. The XRD results reveals that it possess amorphous nature of silica without any impurities. N2 adsorption-desorption studies yielded a pore radius of 16.8 Å and volume of pores are 0.890 cc/g indicating its potential as an adsorbent and its utility for material functionalisation. The developed biosorbent exhibited enhanced adsorption properties for removal of triclosan from synthetic wastewater with 76 % removal at 0.5g/L dose of adsorbent.

Advanced oxidation processes are the most efficient tool to thwart the overaccumulation of harmful organic compounds in the environment. In this direction bioinspired metal complexes may be a viable solution for oxidative degradations in water. However, their synthesis is often elaborated and their scalability consequently low. This study presents alternative easy-to-synthesize bioinspired metal complexes to promote degradations in water. The metals employed were iron and manganese ions, hence cheap and highly accessible ions. The complexes were tested toward Phenol, Estrone, Triclosan, Oxybenzone, Diclofenac, Carbamazepine, Erythromycin, Aspartame, Acesulfame K, Anisole and 2,4-Dinitrotoluene. The reaction favoured electron-rich compounds reaching a removal efficiency of over 90%. The central ion plays a crucial role. Specifically, Mn(II) induces a non-radical pathway while iron ions a predominant radical one (⋅OH is predominant). The iron systems resulted more versatile toward contaminants, while the manganese ones showed a higher turn-over number, hence higher catalytic behaviour. [ABSTRACT FROM AUTHOR]

Zinc oxide nanoparticles (ZnO NPs) are widely used in versatile applications, from high technology to household products. While numerous studies have examined the toxic gene profile of ZnO NPs across various tissues, the specific lipid species associated with adverse effects and potential biomarkers remain elusive. In this study, we conducted a liquid chromatography-mass spectrometry based lipidomics analysis to uncover potential lipid biomarkers in human kidney cells following treatment with ZnO NPs. Furthermore, we employed lipid pathway enrichment analysis (LIPEA) to elucidate altered lipid-related signaling pathways. Our results demonstrate that ZnO NPs induce cytotoxicity in renal epithelial cells and modulate lipid species; we identified 64 lipids with a fold change (FC) > 2 and p < 0.01 with corrected p < 0.05 in HK2 cells post-treatment with ZnO NPs. Notably, the altered lipids between control HK2 cells and those treated with ZnO NPs were associated with the sphingolipid, autophagy, and glycerophospholipid pathways. This study unveils novel potential lipid biomarkers of ZnO NP nanotoxicity, representing the first lipidomic profiling of ZnO NPs in human renal epithelial cells. [ABSTRACT FROM AUTHOR]

Global defi cit of fertilizers is evident and as a result of the war in Ukraine the situation is worsening. At the same time, not all the possible major resources of nutrients have found appropriate application in agriculture, as for example sewage and its sludge, which are among the most promising sources of P, N and organic matter. Sewage sludge (SS) usage as an agricultural fertilizer has a number of limitations. Amongst them persistent organic pollutants (POPs) have a special role due to their ability to affect living organisms. Ongoing work directed to eliminating POPs present in SS is widely reported, but due to the complexity of these compounds no universal success has been achieved. In the case of several undesired residual compounds promising results have been gained using SS composting with different bulking agents. The current study was concentrated on the degradation of some widely used persistent POPs that are present in SS, namely carbamazepine (CBZ) and triclosan (TCS). Peat alone as a bulking agent widely used in the mixture with sewage sludge in Estonia is not suitable for initiating the process of composting. Additions of carbon-rich matter, as for example draff, might provide the relevant conditions needed for launching this process. [ABSTRACT FROM AUTHOR]

Triclopyr, an auxin-like herbicide that is widely employed for managing weeds in food crops and pastures, has been identified in various environmental settings, particularly aquatic ecosystems. Limited understanding of the environmental fate of this herbicide, its potential repercussions for both the environment and human health, and its insufficient monitoring in diverse environmental compartments has caused it to be recognized as an emerging contaminant of concern. In this study, we have investigated how triclopyr affects zebrafish, considering a new alternative methodology. We focused on the endpoints of developmental toxicity, neurotoxicity, and behavior of zebrafish embryos and larvae. We determined that triclopyr has a 96 h median lethal concentration of 87.46 mg/L (341.01 µM). When we exposed zebrafish embryos to sublethal triclopyr concentrations (0.5, 1, 5, 10, and 50 μM) for up to 144 h, we found that 50 µM triclopyr delayed zebrafish egg hatchability. Yolk sac malabsorption was significant at 0.5, 1, 5, and 10 µM triclopyr. In zebrafish larvae, uninflated swim bladder was significant only at 50 µM triclopyr. Furthermore, zebrafish larvae had altered swimming activity after exposure to 10 µM triclopyr for 144 h. In summary, these comprehensive results indicate that even low triclopyr concentrations can elicit adverse effects during early zebrafish development. [ABSTRACT FROM AUTHOR]

Triclosan (TCS), a broad-spectrum antibacterial chemical, is detected in human urine, breast milk, amniotic fluid, and feces; however, little is known about its impact on the intestinal microbiome and host mucosal immunity during pregnancy and early development. Pregnant female rats were orally gavaged with TCS from gestation day (GD) 6 to postpartum (PP) day 28. Offspring were administered TCS from postnatal day (PND) 12 to 28. Studies were conducted to assess changes in the intestinal microbial population (16S-rRNA sequencing) and functional analysis of microbial genes in animals exposed to TCS during pregnancy (GD18), and at PP7, PP28 and PND28. Microbial abundance was compared with the amounts of TCS excreted in feces and IgA levels in feces. The results reveal that TCS decreases the abundance of Bacteroidetes and Firmicutes with a significant increase in Proteobacteria. At PND28, total Operational Taxonomic Units (OTUs) were higher in females and showed correlation with the levels of TCS and unbound IgA in feces. The significant increase in Proteobacteria in all TCS-treated rats along with the increased abundance in OTUs that belong to pathogenic bacterial communities could serve as a signature of TCS-induced dysbiosis. In conclusion, TCS can perturb the microbiome, the functional activities of the microbiome, and activate mucosal immunity during pregnancy and early development. [ABSTRACT FROM AUTHOR]

Triclosan and Triclocarban, preservatives widely used in cosmetics and other consumer products, underwent evaluation using a battery of new-approach methodologies in vitro (NAMs). Specifically, the Microplate Ames Test (MPF™ Test, Xenometrix, Allschwil, Switzerland) was employed to assess mutagenicity, the Comet assay in vitro on the HaCat cell line and the Mammalian Chromosome Aberration Test were utilized to evaluate genotoxicity, and the XenoScreen® YES/YAS assay was applied to investigate endocrine disruption. The chemicals did not exhibit any positive responses for mutagenicity. However, the mammalian chromosome aberration test identified both chemicals as being positive for genotoxicity at 10 µg/mL. In the Comet assay, the percentage of DNA in the tail significantly increased in a concentration-dependent manner (at 5 and 10 µg/mL for Triclosan, at 2.5, 5, and 10 µg/mL for Triclocarban). The positive response depended on the increasing concentration and the duration of exposure. Triclosan, but not Triclocarban in any of the endocrine assays performed, indicated a potential for endocrine activity in the anti-estrogenic and anti-androgenic assays. The positive in vitro results detected were obtained for concentrations relevant to final products. The alarming findings obtained with the use of new-approach methodologies (NAMs) justify the current precautionary regulatory approach, limiting the use of these preservatives. [ABSTRACT FROM AUTHOR]

The discovery of antibiotics saved many lives. Infections were not as deadly a problem for clinicians as they once were. However, due to inappropriate and excessive use of antibiotics, antibiotic resistance has increased dramatically worldwide. Infectious diseases are becoming more challenging to control, and they cause increased morbidity and mortality. Also, a significant risk to human health is posed by infections associated with biofilms. To combat these drug-resistant microorganisms, several novel and alternative strategies have been identified. Bee products such as honey, bee pollen, propolis, royal jelly, bee venom, bee wax, and bee bread have the potential of being used as antimicrobial or antibiofilm agents in various industrial and medical applications. Although these products have some restrictions such as their varying and complex composition, they possess significant potential in the field of medical practices as viable alternatives to antibiotics. They offer a potential solution to the issue of antibiotic resistance. The objective of this review was to offer a comprehensive analysis and evaluation of strategies based on bee products that are currently employed or have been suggested against antimicrobial resistance. [ABSTRACT FROM AUTHOR]

The opportunistic bacteria growing in biofilms play a decisive role in the pathogenesis of chronic infectious diseases. Biofilm-dwelling bacteria behave differently than planktonic bacteria and are likely to increase resistance and tolerance to antimicrobial therapeutics. Antimicrobial adjuvants have emerged as a promising strategy to combat antimicrobial resistance (AMR) and restore the efficacy of existing antibiotics. A combination of antibiotics and potential antimicrobial adjuvants, (e.g., extracellular polymeric substance (EPS)-degrading enzymes and quorum sensing inhibitors (QSI) can improve the effects of antibiotics and potentially reduce bacterial resistance). In addition, encapsulation of antimicrobials within nanoparticulate systems can improve their stability and their delivery into biofilms. Lipid nanocarriers (LNCs) have been established as having the potential to improve the efficacy of existing antibiotics in combination with antimicrobial adjuvants. Among them, liquid crystal nanoparticles (LCNPs), liposomes, solid lipid nanoparticles (SLNs), and nanostructured lipid carriers (NLCs) are promising due to their superior properties compared to traditional formulations, including their greater biocompatibility, higher drug loading capacity, drug protection from chemical or enzymatic degradation, controlled drug release, targeted delivery, ease of preparation, and scale-up feasibility. This article reviews the recent advances in developing various LNCs to co-deliver some well-studied antimicrobial adjuvants combined with antibiotics from different classes. The efficacy of various combination treatments is compared against bacterial biofilms, and synergistic therapeutics that deserve further investigation are also highlighted. This review identifies promising LNCs for the delivery of combination therapies that are in recent development. It discusses how LNC-enabled co-delivery of antibiotics and adjuvants can advance current clinical antimicrobial treatments, leading to innovative products, enabling the reuse of antibiotics, and providing opportunities for saving millions of lives from bacterial infections. [ABSTRACT FROM AUTHOR]

Both geraniol and the products of its transformation, thanks to their beneficial properties, find a variety of applications in cosmetics. Due to their antioxidant and moisturizing properties, these compounds can be added to skin care products such as face creams, lotions, oils, and masks. In addition, these compounds show some antibacterial and antifungal properties, making them suitable for application in skin care products to help fight against bacteria or fungi. This study determined the antimicrobial activity of geraniol and the compounds which were formed during its transformation in relation to selected Gram-positive bacteria, and the preliminary assessment was made whether these compounds can act as ingredients of preparations with potential antimicrobial activity in the treatment of various human diseases (for example diseases of the skin, digestive system, or urinary tract). In addition, this work presents studies on the microbiological purity of cream samples obtained with different contents of geraniol and its transformation products (contents of the tested compounds: 0.5%, 1.5%, 2.5%, 4%, 8%, and 12%). Antibacterial activity tests were performed using the disc diffusion method against Gram-positive cocci, including the reference strains Staphylococcus aureus ATCC 29213 and Enterococcus faecalis ATCC 29212, and against the clinical strains Staphylococcus aureus MRSA, Staphylococcus epidermidis, Enterococcus faecalis VRE VanB, Enterococcus faecium VRE VanA, and Enterococcus faecium VRE VanB. The most active ingredient against bacteria of the Staphylococcus genus was citral, followed by linalool and then geraniol. During our tests, in the case of bacteria of the Enterococcus genus, citral also showed the highest activity, but linalool, ocimenes, and geraniol showed a slightly lower activity. Moreover, this study examined the microbiological purity of cream samples obtained with various contents of geraniol and its transformation products. In the tests of the microbiological purity of cream samples, no growth of aerobic bacteria and fungi was found, which proves the lack of microbiological contamination of the obtained cosmetic preparations. On this basis, it was assessed that these compounds have preservative properties in the prepared creams. The addition of the analyzed compounds also had influence on the durability of the creams and had no effect on the change in their consistency, did not negatively affect the separation of phases during storage, and even had a positive effect on organoleptic sensations by enriching the smell of the tested samples. [ABSTRACT FROM AUTHOR]

Malaysian herbs, Averrhoa Bilimbi, and Flos Lonicerae, are widely known in traditional Chinese medicine. Both are used as natural remedies for jaundice treatment in newborns. Formulating herbal bath soap by the saponification method is proposed because newborn babies are poor feeders. Today, a lot of chemicals are used in soap production. Users will have a wide range of issues due to chemicals like parabens and triclosan. As a result, soap is made from herbs without chemicals. This herbal soap uses two herbs, Averrhoa Bilimbi leaf and Flos Lonicerae. Paper journals examining these herbs’ physicochemical properties are scarce in Malaysia. After the herbal soap has been successfully created, it will be examined for its physicochemical properties. The antioxidant activity and total phenolic content (TPC), of Averrhoa Bilimbi leaf extract and Flos Lonicerae extract were all tested. The antibacterial activity, heavy metal and pH tests were also validated the suitability of this herbal soap for skin application. According to the findings, Averrhoa Bilimbi leaf extract had a TPC value of 24.49 mg GAE/g compared to 4.96 mg GAE/g for Flos Lonicerae extract. Averrhoa Bilimbi leaf required a slightly higher concentration of 0.0588 g/mL extract to inhibit 50% of the DPPH assay compared to Flos Lonicerae plant extract, which required 0.0315 g/mL. Since there was no evidence of any bacterial growth, the herbal soap was effective against all the tested bacterial strains. The heavy metal test showed the soap does not contain any lead, mercury or arsenic and exhibits a pH value which close to the range for suitable skin application. [ABSTRACT FROM AUTHOR]