Search

Yarn-like carbon nanotube (CNT) fibres are a hierarchically-structured material with a variety of promising applications such as high performance composites, sensors and actuators, smart textiles, and energy storage and transmission. However, in order to fully realize these possibilities, a more detailed understanding of their interactions with the environment is required. In this work, we describe a simplified representation of the hierarchical structure of the fibres from which several mathematical models are constructed to explain electro-structural interactions of fibres with organic liquids. A balance between the elastic and surface energies of the CNT bundle network in different media allows the determination of the maximum lengths that open junctions can sustain before collapsing to minimize the surface energy. This characteristic length correlates well with the increase of fibre resistance upon immersion in organic liquids. We also study the effect of charge accumulation in open interbundle junctions and derive expressions to describe experimental data on the non-ohmic electrical behaviour of fibres immersed in polar liquids. Our analyses suggest that the non-ohmic behaviour is caused by progressively shorter junctions collapsing as the voltage is increased. Since our models are not based on any property unique to carbon nanotubes, they should also be useful to describe other hierarchical structures.

This work shows a simple, single-stage, scalable method for the continuous production of high-quality carbon nanotube-polymer transparent conductive films from carbon feedstock. Besides the ease of scalability, a particular advantage of this process is that the concentration of nanotubes in the films, and thus transparency and conductivity, can be adjusted by changing simple process parameters. Therefore, films can be readily prepared for any application desired, ranging from solar cells to flat panel displays. Our best results show a surface resistivity of the order of 300 Ω square -1 for a film with 80% transparency, which is promising at this early stage of process development.

Hydroxyapatite-carbon nanotube (HA-CNT) composites have the potential for improved mechanical properties over HA for use in bone graft applications. Finding an appropriate sintering atmosphere for this composite presents a dilemma, as HA requires water in the sintering atmosphere to remain phase pure and well hydroxylated, yet CNTs oxidize at the high temperatures required for sintering. The purpose of this study was to optimize the atmosphere for sintering these composites. While the reaction between carbon and water to form carbon monoxide and hydrogen at high temperatures (known as the 'water-gas reaction') would seem to present a problem for sintering these composites, Le Chatelier's principle suggests this reaction can be suppressed by increasing the concentration of carbon monoxide and hydrogen relative to the concentration of carbon and water, so as to retain the CNTs and keep the HA's structure intact. Eight sintering atmospheres were investigated, including standard atmospheres (such as air and wet Ar), as well as atmospheres based on the water-gas reaction. It was found that sintering in an atmosphere of carbon monoxide and hydrogen, with a small amount of water added, resulted in an optimal combination of phase purity, hydroxylation, CNT retention and density.

Here, we report a simple and efficient way for organizing carbon nanotubes, in particular, single-wall carbon nanotubes (SWNTs) into ordered structures from their dilute solutions. It was found that drying a droplet of carbon nanotube solution at room temperature on a wettable surface such as glass or silica wafer led to redistribution, accumulation, and organization of carbon nanotubes along the perimeter of the droplet. Unlike the aggregation behaviors of colloid nanoparticles, anistropic carbon nanotubes tended to show two orientations in a ring deposit: one parallel to the outer perimeter of the ring and the other normal to it in the interior. Drying droplets of SWNT solutions at high temperatures exhibited a long-range ordered structure. In addition, droplet drying may cause size separation of carbon nanotubes and pattern formation through interactions between droplets. This result helps us not only to further understand fluid dynamics during the drying process but also to provide a promising and simple strategy for either assembling carbon nanotubes on a surface or organizing them into well-aligned films and fibers.

In this work, disclination interaction behavior in relation to Frank elastic constant anisotropy in nematics has been studied. A large number of (+(1/2), -(1/2)) disclination pairs are revealed by spontaneous band texture in a semiflexible copolyester. The pairs show no preferential relative orientation, with the intervening fields showing intermediate patterns. A two-dimensional tensor lattice model considering unequal elastic constants is applied to simulate the interaction behavior and patterns of disclination pairs in the presence of elastic anisotropy. Scaling laws for disclination density rho(t) as a function of time step t with different elastic anisotropy are obtained as t(-nu). The value of the exponent nu decreases as elastic anisotropy is increased. Obviously, elastic anisotropy slows the texture coarsening. The simulations also show that angular forces arise in the presence of elastic anisotropy and change the patterns of pairs during the texture coarsening. When disclination density is considerably decreased, some +(1/2) disclinations start to rotate to the energetically favored patterns depending on the sign of the elastic anisotropy. As a result of the disclination rotation, the distribution of patterns of pairs continues to change during the annihilation. However, disclination pairs are influenced not only by elastic anisotropy but also by disclination interaction during the whole annihilation. Therefore, in a real system, the dependence of pairs on elastic anisotropy is not as strong as the theoretical prediction for an isolated pair, and the full pattern range of disclination pairs can be observed.

A new route for the highly convenient scalable production of carbon nanofibers on a sodium chloride support has been developed. Since the support is nontoxic and soluble in water, it can be easily removed without damage to the nanofibers and the environment. Nanofiber yields of up to 6500 wt % relative to the nickel catalyst have been achieved in a growth time of 15 min. Electron microscopy (SEM, TEM) and thermal gravimetric analysis (TGA) indicated that the catalytically grown carbon had relatively little thermal over-growth and possessed either a herringbone or a semi-ordered nanostructure, depending on the growth conditions.

Many routes have been developed for the synthesis of carbon nanotubes, but their assembly into continuous fibers has been achieved only through postprocessing methods. We spun fibers and ribbons of carbon nanotubes directly from the chemical vapor deposition (CVD) synthesis zone of a furnace using a liquid source of carbon and an iron nanocatalyst. This process was realized through the appropriate choice of reactants, control of the reaction conditions, and continuous withdrawal of the product with a rotating spindle used in various geometries. This direct spinning from a CVD reaction zone is extendable to other types of fiber and to the spin coating of rotating objects in general.

Neurodegenerative diseases resulting from expanded repeat sequences of glutamine residues are associated with the formation of protein aggregates in the cell nuclei of the affected neurons, but whether these are pathogenic is controversial. Recent observations indicate that the ages of onset of these diseases are exponential functions of the repeat lengths and that the probability of neural death is constant with time. The only process known to us that could give rise to such behaviour is nucleation of the aggregates.