Search

In this paper, the performance of air-cored (ironless) stator axial flux permanent magnet machines with different types of concentrated-coil nonoverlapping windings is evaluated. The evaluation is based on theoretical analysis and is confirmed by finite-element analysis and measurements. It is shown that concentrated-coil winding machines can have a similar performance as that of normal overlapping winding machines using less copper. Index Terms--Air cored, axial flux, concentrated winding, permanent magnet (PM).

In this paper, a thermofluid model combining a lumped parameter heat transfer model and an air-flow model of a typical axial-field permanent-magnet (AFPM) machine is developed. The accuracy and consistency of the derived model are assessed by comparing the calculated flow rate and temperature values of a prototype machine with the measured ones. The developed thermofluid model is shown to perform thermal calculations with reasonable accuracy. Index Terms--Air cooling, axial field, heat transfer, permanent-magnet machine, thermal modeling.

This paper describes a hybrid method for calculating the performance of a coreless stator axial flux permanent-magnet (AFPM) generator. The method uses a combination of finite-element analysis and theoretical analysis. The method is then incorporated into a multidimensional optimization procedure to optimally design a large power coreless stator AFPM generator. The measured performance of the manufactured prototype compares favorably with the predicted results. The design approach can be applied successfully to optimize the design of the coreless stator AFPM machine. Index Terms--Axial flux, design, finite-element methods, optimization methods, permanent-magnet generator.

This paper presents a hybrid method for the calculation of eddy current loss in coreless stator axial field permanent-magnet (AFPM) machines. The method combines the use of two-dimensional finite element (FE) field analysis and the closed-form eddy loss formula. To account for three-dimensional field effects in an AFPM machine, a multilayer and multislice modeling technique has been devised. Experimental tests are carried out to validate the method. It is shown that the proposed method predicts the eddy current losses of a coreless stator AFPM machine with high accuracy. Index Terms--Axial field, eddy currents, finite-element (FE) method, permanent-magnet (PM) machine.

This paper presents the design and evaluation of a magnetically geared permanent magnet (PM) machine with an inner stator. A brief overview of relevant operating principles is given first. A simplified design and simulation methodology, which can ensure that the magnetic gear and the stator are well matched, is then devised. The method is applied to the design optimization of a small machine resulting in a design with a maximum torque density of 115 kN \,\cdot \,\textm/\textm^\text 3 per active volume. To validate the design, a working prototype has been built and experimentally evaluated. It shows that this computationally efficient design methodology is well suited for the optimization of magnetically geared PM machines. Finally, a method of analyzing the operating points of the machine is described. Relevant conclusions are drawn and recommendations for future work are given. [ABSTRACT FROM AUTHOR]

The simulation of magnetically geared electrical machines using the finite element method is an especially demanding task when movement has to be considered. Several methods that facilitate movement exist. In this paper, two of these methods, the macro air-gap element (AGE) and the moving band (MB) are applied in a time-stepped static simulation of a magnetically geared machine (MGM). The methods are evaluated in terms of accuracy and computational efficiency, vitally important factors for numerical optimization. The implementation of both methods exploit the multi-core architecture of modern CPUs to solve several steps in parallel, drastically reducing the simulation time. Nevertheless, the computational cost of the AGE is prohibitively high in the simulation of MGMs. The MB is computationally efficient and good accuracy can be achieved using a multilayer approach. [ABSTRACT FROM PUBLISHER]